You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

294 lines
9.9 KiB

# Copyright (c) 2013 - present Facebook, Inc.
# All rights reserved.
#
# This source code is licensed under the BSD style license found in the
# LICENSE file in the root directory of this source tree. An additional grant
# of patent rights can be found in the PATENTS file in the same directory.
ROOT_DIR = ../..
include $(ROOT_DIR)/Makefile.config
#### Global declarations ####
ETC_DIR = $(INFER_DIR)/etc
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
# paths to BUILD_DIR are relative because that's how jbuilder likes it
[build] switch to 4.05.0+flambda by default Summary: With flambda (`-O3`), compilation time is ~5x slower, but the backend is ~25% faster! To mitigate the atrocious compilation times, introduce a new `opt` build mode in the jbuilder files. - build in "opt" mode by default from the toplevel (so that install scripts and external users get the fastest infer by default), in "default" mode by default from infer/src (since the latter is only called directly by infer devs, for faster builds) - `make byte` is as fast as before in any mode - `make test` will build "opt" by default, which is very slow. Solution for testing (or building the models) locally: `make BUILD_MODE=default test`. - You can even change the default locally with `export BUILD_MODE=default`. The benchmarks are to be taken with a sizable pinch of salt because I ran them only once and other stuff could be running in the background. That said, the perf win is consistent across all projects, with 15-20% win in wallclock time and around 25% win in total CPU time, ~9% win in sys time, and ~25% fewer minor allocations, and ~5-10% fewer overall allocations. This is only for the backend; the capture is by and large unaffected (either the same or a tad faster within noise range). Here are the results running on OpenSSL 1.0.2d on osx (12 cores, 32G RAM) === base infer binary: 26193088 bytes compile time: 40s capture: ```lang=text real 1m7.513s user 3m11.437s sys 0m55.236s ``` analysis: ```lang=text real 5m41.580s user 61m37.855s sys 1m12.870s ``` Memory profile: ```lang=json { ... "minor_gb": 0.1534719169139862, "promoted_gb": 0.0038930922746658325, "major_gb": 0.4546157643198967, "allocated_gb": 0.6041945889592171, "minor_collections": 78, "major_collections": 23, "compactions": 7, "top_heap_gb": 0.07388687133789062, "stack_kb": 0.3984375, "minor_heap_kb": 8192.0, ... } ``` === flambda with stock options (no `-Oclassic`, just the same flags as base) Exactly the same as base. === flambda `-O3` infer binary: 56870376 bytes (2.17x bigger) compile time: 191s (4.78x slower) capture is the same as base: ```lang=text real 1m9.203s user 3m12.242s sys 0m58.905s ``` analysis is ~20% wallclock time faster, ~25% CPU time faster: ```lang=text real 4m32.656s user 46m43.987s sys 1m2.424s ``` memory usage is a bit lower too: ```lang=json { ... "minor_gb": 0.11583046615123749, // 75% of previous "promoted_gb": 0.00363825261592865, // 93% of previous "major_gb": 0.45415670424699783, // about same "allocated_gb": 0.5663489177823067, // 94% of previous "minor_collections": 73, "major_collections": 22, "compactions": 7, "top_heap_gb": 0.07165145874023438, "stack_kb": 0.3359375, "minor_heap_kb": 8192.0, ... } ``` === flambda `-O2` Not nearly as exciting as `-O3`, but the compilation cost is still quite high: infer: 37826856 bytes compilation of infer: 100s Capture and analysis timings are mostly the same as base. Reviewed By: jberdine Differential Revision: D4867979 fbshipit-source-id: 99230b7
7 years ago
# can be overriden to specify another build mode (eg opt)
INFER_BUILD_DIR = _build/default
#### Backend declarations ####
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_MAIN = infer
#### Checkers declarations ####
INFER_ATDGEN_STUB_BASES = atd/jsonbug atd/runstate atd/stacktree
INFER_ATDGEN_TYPES = j t
INFER_ATDGEN_STUB_ATDS = $(INFER_ATDGEN_STUB_BASES:.atd)
INFER_ATDGEN_SUFFIXES = $(foreach atd_t,$(INFER_ATDGEN_TYPES),_$(atd_t).ml _$(atd_t).mli)
INFER_ATDGEN_STUBS = $(foreach base,$(INFER_ATDGEN_STUB_BASES),\
$(addprefix $(base),$(INFER_ATDGEN_SUFFIXES)))
#### InferCreateTraceViewLinks declarations ####
FACEBOOK_DIR = facebook
INFER_CREATE_TRACEVIEW_LINKS_MODULE = InferCreateTraceViewLinks
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_CREATE_TRACEVIEW_LINKS_MAIN = $(INFER_CREATE_TRACEVIEW_LINKS_MODULE)
### InferUnit declarations ###
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFERUNIT_MAIN = inferunit
#### Clang declarations ####
CLANG_PLUGIN_MIRROR = atd
FCP_CLANG_OCAML_BUILD_DIR = $(FCP_CLANG_OCAML_DIR)/build
CLANG_PLUGIN_BINARIES = $(addprefix $(FCP_CLANG_OCAML_BUILD_DIR), \
clang_ast_converter clang_ast_named_decl_printer)
CLANG_AST_BASE_NAME = clang_ast
CLANG_ATDGEN_STUB_BASE = $(CLANG_PLUGIN_MIRROR)/$(CLANG_AST_BASE_NAME)
CLANG_ATDGEN_STUB_ATD = $(FCP_CLANG_OCAML_BUILD_DIR)/$(CLANG_AST_BASE_NAME).atd
CLANG_ATDGEN_TYPES = b j t v
CLANG_ATDGEN_SUFFIXES = $(foreach atd_t,$(CLANG_ATDGEN_TYPES),_$(atd_t).ml _$(atd_t).mli)
CLANG_ATDGEN_STUBS = $(addprefix $(CLANG_ATDGEN_STUB_BASE), $(CLANG_ATDGEN_SUFFIXES))
FCP_CLANG_AST_PROJ = $(addprefix $(FCP_CLANG_OCAML_BUILD_DIR)/, \
clang_ast_proj.ml clang_ast_proj.mli)
FCP_CLANG_AST_MAIN = $(addprefix $(FCP_CLANG_OCAML_DIR)/, clang_ast_visit.ml clang_ast_types.ml)
FCP_FILES_TO_MIRROR = $(FCP_CLANG_AST_PROJ) $(FCP_CLANG_AST_MAIN)
CLANG_PLUGIN_MIRRORED_FILES = $(addprefix $(CLANG_PLUGIN_MIRROR)/, $(notdir $(FCP_FILES_TO_MIRROR)))
CLANG_BINIOU_DICT = $(ETC_DIR)/clang_ast.dict
#### scripts declarations ####
CHECKCOPYRIGHT_BIN = $(SCRIPT_DIR)/checkCopyright
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
CHECKCOPYRIGHT_MAIN = checkCopyright
#### End of declarations ####
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
ifeq ($(ENABLE_OCAMLOPT_CUSTOM_CC),yes)
EXTRA_CFLAGS += -cc,$(CC)
endif
# list of ocamlbuild targets common to all build targets -- native version
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_CONFIG_TARGETS = $(INFER_BUILD_DIR)/$(INFER_MAIN).exe
ifeq ($(IS_FACEBOOK_TREE),yes)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_CONFIG_TARGETS += $(INFER_BUILD_DIR)/$(INFER_CREATE_TRACEVIEW_LINKS_MAIN).exe
endif
OCAML_GENERATED_SOURCES = \
base/Version.ml $(INFER_ATDGEN_STUBS)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
ifeq ($(BUILD_C_ANALYZERS),yes)
OCAML_GENERATED_SOURCES += $(CLANG_ATDGEN_STUBS) $(CLANG_PLUGIN_MIRRORED_FILES)
endif
OCAML_SOURCES = \
$(wildcard */[a-zA-Z]*.ml */[a-zA-Z]*.ml[ily]) \
$(OCAML_GENERATED_SOURCES)
.PHONY: all
all: infer
GENERATED_FROM_AUTOCONF = jbuild.common jbuild-workspace base/Version.ml
GENERATED_JBUILDS = jbuild atd/jbuild deadcode/jbuild istd/jbuild scripts/jbuild
SRC_BUILD_COMMON = $(GENERATED_FROM_AUTOCONF) $(GENERATED_JBUILDS) $(OCAML_SOURCES)
ifeq ($(BUILD_C_ANALYZERS),yes)
SRC_BUILD_COMMON += $(CLANG_BINIOU_DICT)
endif
.PHONY: src_build_common
src_build_common: $(SRC_BUILD_COMMON)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
# single out infer.exe as the source of truth for make, knowing that in fact several targets are
# produced by the build
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BUILD_DIR)/$(INFER_MAIN).exe: $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
$(QUIET)jbuilder build $(INFER_CONFIG_TARGETS)
# let make know that the target is up-to-date even if ocamlbuild cached it
$(QUIET)touch $@
.PHONY: test
test: $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
$(QUIET)jbuilder build \
$(patsubst $(INFER_BUILD_DIR)/%.exe,_build/test/%.bc,$(INFER_CONFIG_TARGETS)) \
_build/test/scripts/checkCopyright.bc _build/test/$(INFERUNIT_MAIN).bc _build/test/infertop.bc
INFER_BIN_ALIASES = $(foreach alias,$(INFER_COMMANDS),$(BIN_DIR)/$(alias))
$(INFER_BIN_ALIASES): Makefile
# make sure the bin directory exists
$(QUIET)$(MKDIR_P) $(@D)
$(QUIET)cd $(@D) && $(LN_S) -f infer $(@F)
$(QUIET)touch $@
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BIN).exe: $(INFER_BUILD_DIR)/$(INFER_MAIN).exe $(INFER_BIN_ALIASES)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).exe $(INFER_BIN)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).exe $(INFER_BIN).exe
ifeq ($(IS_FACEBOOK_TREE),yes)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_CREATE_TRACEVIEW_LINKS_MAIN).exe \
$(INFER_CREATE_TRACEVIEW_LINKS_BIN)
endif
.PHONY: infer
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
infer: $(INFER_BIN).exe
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BUILD_DIR)/$(INFER_MAIN).bc: $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
jbuilder build $(INFER_CONFIG_TARGETS:.exe=.bc)
$(QUIET)touch $@
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BIN).bc: $(INFER_BUILD_DIR)/$(INFER_MAIN).bc $(INFER_BIN_ALIASES)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).bc $(INFER_BIN)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).bc $(INFER_BIN).bc
ifeq ($(IS_FACEBOOK_TREE),yes)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_CREATE_TRACEVIEW_LINKS_MAIN).bc \
$(INFER_CREATE_TRACEVIEW_LINKS_BIN)
endif
.PHONY: byte
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
byte: $(INFER_BIN).bc
roots:=Infer
ifeq ($(IS_FACEBOOK_TREE),yes)
roots += $(INFER_CREATE_TRACEVIEW_LINKS_MODULE)
endif
clusters:=base clang java IR
ml_src_files:=$(shell find . -not -path "./*stubs*" -regex '\./[a-zA-Z].*\.ml\(i\)*')
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
inc_flags:=$(foreach dir,$(shell find . -type d),-I $(dir))
root_flags:=$(foreach root,$(roots),-r $(root))
cluster_flags:=$(foreach cluster,$(clusters),-c $(cluster))
mod_dep.dot: $(ml_src_files)
$(MAKE) -C $(DEPENDENCIES_DIR)/ocamldot
ocamldep.opt $(inc_flags) $(ml_src_files) \
| $(DEPENDENCIES_DIR)/ocamldot/ocamldot $(cluster_flags) $(root_flags) \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
| grep -v -e "\"IList\"\|\"Utils\"\|\"IStd\"\|\"Infertop\"" \
> mod_dep.dot
mod_dep.pdf: mod_dep.dot
dot -Tpdf -o mod_dep.pdf mod_dep.dot
.PHONY: dsort
dsort:
$(QUIET)ocamldep.opt -sort $(inc_flags) $(ml_src_files)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BUILD_DIR)/infertop.bc: $(SRC_DIR)/infertop.ml $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
jbuilder build $@
$(QUIET)touch $@
.PHONY: toplevel
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
toplevel: $(INFER_BUILD_DIR)/infertop.bc
.PHONY: checkCopyright
checkCopyright: $(CHECKCOPYRIGHT_BIN)
$(CHECKCOPYRIGHT_BIN): $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
jbuilder build $(INFER_BUILD_DIR)/scripts/$(CHECKCOPYRIGHT_MAIN).exe
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/scripts/$(CHECKCOPYRIGHT_MAIN).exe $(CHECKCOPYRIGHT_BIN)
define gen_atdgen_rules
# generate files using atdgen
# parameters:
# 1. the .atd file to generate .ml{,i} files from, e.g. foo.atd
# 2. the base name of .ml{,i} files, e.g. foo
# 3. the type of files to generate: b, j, t, or v
$(2)_$(3).mli: $(1)
$(ATDGEN) -$(3) $$< -o $(2)
# the .ml depends on the corresponding .mli to avoid running atdgen
# twice during parallel builds
$(2)_$(3).ml: $(2)_$(3).mli
endef
$(foreach atd_type,$(INFER_ATDGEN_TYPES),\
$(foreach base,$(INFER_ATDGEN_STUB_BASES),\
$(eval \
$(call gen_atdgen_rules,$(base).atd,$(base),$(atd_type)))))
# rebuild the artifacts of the AST files whenever they're upated in FCP
$(foreach atd_type,$(CLANG_ATDGEN_TYPES),\
$(eval \
$(call gen_atdgen_rules,$(CLANG_ATDGEN_STUB_ATD),$(CLANG_ATDGEN_STUB_BASE),$(atd_type))))
define mirror_fcp_file
$(CLANG_PLUGIN_MIRROR)/$(notdir $(1)): $(1)
$(INSTALL_DATA) $$< $$@
endef
$(foreach file, $(FCP_FILES_TO_MIRROR), $(eval $(call mirror_fcp_file,$(file))))
$(CLANG_BINIOU_DICT): $(CLANG_ATDGEN_STUB_ATD)
# overapproximation of the words we need in the biniou dictionary
# the long litany of symbols is [:punct:] minus "_-'"
tr -s '[*!"#\$%&\(\)\+,\\\.\/:;<=>\?@\[\\\\]^`\{|\}~[:space:]]' '\n' \
< $< \
| sort | uniq \
> $@
$(GENERATED_FROM_AUTOCONF): $(MAKEFILE_LIST)
TMPFILE=$$(mktemp $@.tmp.XXXX); \
INFER_GIT_COMMIT=$$(git --work-tree=$(ROOT_DIR) --git-dir=$(ROOT_DIR)/.git rev-parse --short HEAD || printf "unknown"); \
INFER_GIT_BRANCH=$$(git --work-tree=$(ROOT_DIR) --git-dir=$(ROOT_DIR)/.git rev-parse --abbrev-ref HEAD || printf "unknown"); \
sed \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
-e 's|@EXTRA_CFLAGS[@]|$(EXTRA_CFLAGS)|g' \
-e 's|@INFER_MAJOR[@]|$(INFER_MAJOR)|g' \
-e 's|@INFER_MINOR[@]|$(INFER_MINOR)|g' \
-e 's|@INFER_PATCH[@]|$(INFER_PATCH)|g' \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
-e 's|@IS_FACEBOOK_TREE[@]|$(IS_FACEBOOK_TREE)|g' \
-e 's|@IS_RELEASE_TREE[@]|$(IS_RELEASE_TREE)|g' \
-e "s|@INFER_GIT_COMMIT[@]|$$INFER_GIT_COMMIT|g" \
-e "s|@INFER_GIT_BRANCH[@]|$$INFER_GIT_BRANCH|g" \
-e "s|@BUILD_C_ANALYZERS[@]|$(BUILD_C_ANALYZERS)|g" \
-e "s|@BUILD_JAVA_ANALYZERS[@]|$(BUILD_JAVA_ANALYZERS)|g" \
-e "s|@BUILD_PYTHON_ANALYZERS[@]|$(BUILD_PYTHON_ANALYZERS)|g" \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
-e "s|@OPAMSWITCH[@]|$(OPAMSWITCH)|g" \
-e "s|@XCODE_SELECT[@]|$(XCODE_SELECT)|g" \
-e "s|@INFER_MAN_LAST_MODIFIED[@]|$(INFER_MAN_LAST_MODIFIED)|g" \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$@.in > "$$TMPFILE"; \
cat "$$TMPFILE" > $@; \
$(REMOVE) "$$TMPFILE"
jbuild.common: jbuild.common.in
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
jbuild-workspace: jbuild-workspace.in
base/Version.ml: base/Version.ml.in
$(GENERATED_JBUILDS): jbuild.common
$(QUIET)cat $+ > $@
jbuild: jbuild.in
atd/jbuild: atd/jbuild.in
deadcode/jbuild: deadcode/jbuild.in
istd/jbuild: istd/jbuild.in
scripts/jbuild: scripts/jbuild.in
.PHONY: clean
clean:
$(MAKE) -C deadcode clean
$(REMOVE) $(INFER_TARGET)
$(REMOVE) toplevel.mlpack
$(REMOVE_DIR) $(BUILD_DIR)
$(REMOVE) $(ETC_DIR)/clang_ast.dict
$(REMOVE) $(GENERATED_FROM_AUTOCONF)
$(REMOVE) $(GENERATED_JBUILDS)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(REMOVE) base/Version.ml.tmp.* jbuild.tmp.* jbuild-workspace.tmp.*
# be a bit more aggressive than needed with what we remove here so that stale binaries that
# only existed in previous versions get removed as well
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(REMOVE) $(BIN_DIR)/Infer* $(BIN_DIR)/infer-* $(INFER_BIN){,.bc,.exe} $(INFER_BIN_ALIASES) \
$(INFERUNIT_BIN) $(CHECKCOPYRIGHT_BIN)
$(REMOVE) $(INFER_CREATE_TRACEVIEW_LINKS_BIN)
$(REMOVE) atd/*_{j,t,v}.ml{,i} atd/clang_*
$(REMOVE) mod_dep.dot
$(REMOVE) mod_dep.pdf
.PHONY: fmt
fmt:
@$(MAKE) -C $(ROOT_DIR) fmt