Summary: If the procedure is defined, then the attributes should be the same on the specs files or on the attributes table.
Reviewed By: sblackshear
Differential Revision: D6910086
fbshipit-source-id: 709b290
Summary:
- small optimization by starting deconstructing procnames/types in the dispatcher rather than the matchers
- as a consequence, returns fast for unhandled constructs like Java procnames or types
- Java is still not handled but at least does not crash
- re-enable Inferbo for Java
Reviewed By: jberdine
Differential Revision: D6912304
fbshipit-source-id: 76e95a8
Summary:
In some cases infer runs clang commands where we do not attach the plugin,
notably for pre-processor-only commands like `clang -E foo.c`. Usually these
commands are used by build systems to test their output, so infer should not
swallow it.
This makes infer echo the stdout of clang whenever we do not attach the plugin
to clang. When the plugin is attached, stdout is captured because that's where
the plugin outputs its results, so we cannot do the same in this case (not that
we would want to yet).
Fixes#696.
Reviewed By: mbouaziz
Differential Revision: D6912101
fbshipit-source-id: c4ad2e4
Summary:
Record "capture phases" in the runstate and in the source files table of the
database. Use this instead of filesystem timestamps to decide which files need
re-analyzing in the reactive analysis.
Reviewed By: jeremydubreil
Differential Revision: D6760833
fbshipit-source-id: 7955621
Summary:
The boolean lock domain is simple and surprisingly effective.
But it's starting to cause false positives in the case where locks are nested.
Releasing the inner lock also releases the outer lock.
This diff introduces a new locks domain: a map of locks (access paths) to a bounded count representing an underapproximation of the number of times the lock has been acquired.
For now, we just use a single dummy access path to represent all locks (and thus a count actually would have been sufficiently expressive; we don't need the map yet).
But I'm planning to remove this limitation in a follow-up by refactoring the lock models to give us an access path.
Knowing the names of locks could be useful for error messages and suggesting fixes.
Reviewed By: jberdine
Differential Revision: D6182006
fbshipit-source-id: 6624971
Summary: There's a new `ocaml_pos` type that the other clang frontend exceptions use, but Self.SelfClassException still used the raw tuple. Now, SelfClassException also uses this type.
Reviewed By: dulmarod
Differential Revision: D6900258
fbshipit-source-id: 94c7042
Summary:
This should fix the following issues:
- the previous release (0.13.0) not building anymore (#830)
- ubuntu 17:04 reached end of life, so `apt-get update` would now fail (#846)
- Docker doesn't support the `MAINTAINER` entry anymore, replaced by `LABEL maintainer` (#857)
Fixes#830, #846, #857
Reviewed By: sblackshear
Differential Revision: D6889313
fbshipit-source-id: 14daf1d
Summary:
- During backend execution, infer will log detailed stats about procedure analysis
- Logging is integrated with EventLogger
- `events_to_log` field added to Stats.t record in InferPrint
- New format in InferPrint - Logs
- `format_list` type changed to have a Utils.Outfile option to support Logs format
Reviewed By: dulmarod
Differential Revision: D6834538
fbshipit-source-id: 8c847f5
Summary:
Previously, we could understand than an access was safe either because it was possibly owned or protected by a thread/lock, but not both. If an access was both protected by a lock and rooted in a paramer (i.e., possibly owned), we would forget the ownership part of the precondition and remember only the lock bit. This leads to false positives in cases where an access protected by a lock is owned, but another unowned access to the same memory is not protected by a lock (see the new `unownedLockedWriteOk` E2E test for an example).
This diff makes access safety conditions disjunctive so we can simultaneously track whether an access is owned and whether an access is protected by a thread/lock. This will fix false positives like the one explained in T24015160.
Reviewed By: jberdine
Differential Revision: D6671489
fbshipit-source-id: d17715f
Summary:
- ast_node argument is now optional in functions `unimplemented` and `incorrect_assumption` in cFrontend_config
- The argument type was already an option, and the majority of the calls were with 'None'. This makes the function more intuitive to use
Reviewed By: sblackshear
Differential Revision: D6846141
fbshipit-source-id: 13deb8f
Summary:
We already knew not to warn when non-resource `Closeable`'s like `ByteArrayOutputStream` weren't closed, but we still warned on their subtypes.
This diff fixes that problem by checking subclasses in the frontend.
This also removes the need for Java source code models of non-resource types, so I removed them.
Reviewed By: jeremydubreil
Differential Revision: D6843413
fbshipit-source-id: 60fe7fb
Summary: The heuristics to determine the end of a block/procedure was too brittle, the new one ignores non significant instructions.
Reviewed By: jvillard
Differential Revision: D6845380
fbshipit-source-id: feab557
Summary:
The infer results directories in buck-out/ are "cleaned up" to avoid polluting
the Buck cache with too much data or non-deterministic data. In particular, the
runstate is deleted, which confused subsequent infer processes trying to read
the pre-existing results directory.
Add a special case in infer to delete pre-existing results directories in
buck-out instead of trying to load their state.
Reviewed By: mbouaziz
Differential Revision: D6845128
fbshipit-source-id: 5c716aa
Summary:
Useful for testing stuff with ppx. Opening `IStd` is needed to open `Core`,
which pulls stuff like `compare_option` into the global namespace, and is
generally useful anyway as it's the excpected development environment for
infer.
Reviewed By: mbouaziz
Differential Revision: D6834071
fbshipit-source-id: 26a1304
Summary:
- `NonZeroInt` for added guarantees on the invariants of `SymLinear` coefficients
- some simplifications
- some optimizations
Reviewed By: jvillard
Differential Revision: D6833968
fbshipit-source-id: 39e28a0
Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary:
This diff fixes the translation of `new` and `placement new` with one argument. If `placement new` has more than one argument it means that it is user-defined (this will be addressed in another diff).
update-submodule: facebook-clang-plugins
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6807751
fbshipit-source-id: 7cf0290
Summary:
Before this diff, the `Ondemand` module would not cache the results of the function `analyze_proc_desc`, which is used by the toplvel iteration.
This should not have any effect on the performances at this point as the summaries were already cached in the `Specs` module. Now, we can start remove the use of the cache in the `Specs` module to avoid the duplication. Caching at the level of `Ondemand` is better as we can safely cache the information that the outcome of the analysis is `None`, which avoids scanning the filesystem or the DB multiple times.
Reviewed By: mbouaziz, jvillard
Differential Revision: D6713546
fbshipit-source-id: 309701b
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary: It was getting a bit difficult to tell which functions belonged where.
Reviewed By: jvillard
Differential Revision: D6764764
fbshipit-source-id: f9faada
Summary:
This lets us fix the limitation of reporting false positives when a `private` function calls `build()` on a parameter without passing all of the required props.
We will now report such issues in the caller only if it fails to pass the required props.
An unfortunate consequence of this change is that we lose track of where the actual call to `build` occurs--we now report on the declaration of the caller function rather than on the call site of `build`.
I'll work on addressing that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6764153
fbshipit-source-id: 3b173e5
Summary:
The captured variables of a closure are tuples (id, var, typ) with the implicit assumption
that &var -> id holds in the heap. This is true when the closure is created, but is not enforce otherwise.
This becomes a problem when the closure is stored in the heap, goes passed a bi-abduction, and then it's executed
(see new test). This was failing before this diff and now succeeds.
We add the verification of this constraint to the normalization of sigma.
At the moment I expect Precondition_not_met to be removed, but also later, we will be able to compute retain cycles
over the closures, as the correct captured variable info is kept through the execution.
Reviewed By: jvillard
Differential Revision: D6796525
fbshipit-source-id: a8a7655
Summary:
Not sure what an "iCFG" is but the dotty is only about CFGs anyway.
Diff obtained by mass-`sed`.
Reviewed By: sblackshear
Differential Revision: D6324280
fbshipit-source-id: b7603bb
Summary:
Also make it optional, since it's only used for debug messages. Name a couple
more of these for other similar functions.
Reviewed By: sblackshear
Differential Revision: D6797385
fbshipit-source-id: e6e9b2e
Summary:
I needed to do this for something, now I don't know if I want to do the thing
anymore but this seems generally useful to decrease a little bit the size of
Config.ml.
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6796427
fbshipit-source-id: d9c009d
Summary:
Also, always log failures.
This also shows that the dead code detection does not detect dead exceptions :/
Reviewed By: jeremydubreil
Differential Revision: D6796843
fbshipit-source-id: 3d0ff5c