Summary: Before, we didn't track litho framework callees on client code which was wrong. Now, we replace this with the following: If the callee is `build()` itself or doesn't contain a `build()` in its summary, then we want to track it in the domain. The former makes sense since we always want to track `build()` methods. The latter also makes sense since such a method could be a setter for a prop (as in the case of `prop1` in `buildPropLithoOK` which we were missing before due to the imprecise heuristic that prevented picking up callees in litho).
Reviewed By: ngorogiannis
Differential Revision: D17810704
fbshipit-source-id: 87d88e921
Summary: As a heuristic, litho library calls on non-litho callers are not tracked. This is very imprecise and results in FPs and FNs as exemplified by newly added tests. Instead, we should check to see if the summary contains a `build()` method as will be done in the next diff. This diff adds these tests and refactors the test code.
Reviewed By: skcho
Differential Revision: D17809536
fbshipit-source-id: 6dff1868c
Summary:
Improve the trace by incorporating the callees and their locations in the call chain (i.e. chain of methods starting from `build()` call)
- extend the domain to contain the callee location
- replace the test results with the new traces
This makes our job much easier to debug FPs in a big codebase.
Reviewed By: skcho
Differential Revision: D17788996
fbshipit-source-id: 31938b5fe
Summary: `litho` checker contained two checkers: required-props and graphQL field accesses. Although they use the same domain, their reporting conditions and analysis details are different. However, they were bundled into the same analysis by adding disjunctions to `exec_instr` to handle both cases. Let's separate them into two different checkers, keeping a modular transfer function and analyzer that is reused by these two checkers.
Reviewed By: skcho
Differential Revision: D17788834
fbshipit-source-id: 47d77063b
Summary:
At some point it was thought that we can assume that any annotation starting with "On" means the method is on the UI thread.
That's too imprecise and has led to false positives and negatives. Restrict to a well-known safe set.
Reviewed By: ezgicicek
Differential Revision: D17769376
fbshipit-source-id: 0f8fee059
Summary:
This diff tries to narrowing the fixpoint of outermost loops, so that over-approximated widened values do not flow to the following code.
Problem: There are two phases for finding a fixpoint, widening and narrowing. First, it finds a fixpoint with widening, in function level. After that, it finds a fixpoint with narrowing. A problem is that sometimes an overly-approximated, imprecise, values by widening are flowed to the following loops. They are hard to narrow in the narrowing phase because there is a cycle preventing it.
To mitigate the problem, it tries to do narrowing, in loop level, right after it found a fixpoint of a loop. Thus, it narrows before the widened values are flowed to the following loops. In order to guarantee the termination of the analysis, this eager narrowing is applied only to the outermost loops.
Reviewed By: ezgicicek
Differential Revision: D17740265
fbshipit-source-id: e2d454036
Summary:
This diff extends the alias domain to analyze loop with list comprehensions form in Java precisely.
```
list2 = new List();
for (Element e : list1) {
list2.add(e);
}
```
1. `IteratorOffset` is a relation between a iterator offset and a length of another array. For example, in the above example, after n-times of iterations, the offset of the iterator (if it exists) and the length of `list2` are the same as `n`.
2. `IteratorHasNext` is a relation between iterator and its `hasNext` result.
3. At the conditional nodes, it prunes the alias list length of `list2` by that of `list1`.
* if `hasNext(list1's iterator)` is true, `list2`'s length is pruned by `< list1's length`
* if `hasNext(list1's iterator)` is false, `list2`'s length is pruned by `= list1's length`
Reviewed By: ezgicicek
Differential Revision: D17667128
fbshipit-source-id: 41fb23a45
Summary:
The old domain keeps two sets:
- `events` are things (including lock acquisitions) which eventually happen during the execution of a procedure.
- `order` are pairs of `(lock, event)` such that there is a trace through the procedure which at some point acquires `lock` and before releasing it performs `event`.
A deadlock would be reported if for two procedures, `(lock1,lock2)` is in `order` of procedure 1 and `(lock2,lock1)` is in `order` of procedure 2. This condition/domain allowed for the false positive fixed in the tests, as well as was unwieldy, because it required translating between the two sets.
The new domain has only one set of "critical pairs" `(locks, event)` such that there is a trace where `event` occurs, and *right before it occurs* the locks held are exactly `locks` (no over/under approximation). This allows keeping all information in one set, simplifies the procedure call handling and eliminates the known false positive.
Reviewed By: mityal
Differential Revision: D17686944
fbshipit-source-id: 3c68bb957
Summary: Holding a master lock and then acquiring two other locks inside can generate a false positive as shown.
Reviewed By: mityal
Differential Revision: D17710076
fbshipit-source-id: 5bc910ba2
Summary:
Previously deduplication was always on which is not great for testing.
Also split tests so that we can still test deduplication separately.
Reviewed By: mityal
Differential Revision: D17686877
fbshipit-source-id: 280d91473
Summary:
Ideally the analyser should equate locks `this.x.f` and `a.x.f` in different methods if they can alias.
The heuristic removed here was rarely used and is in the way of a re-write of the analysis.
It was also badly implemented, as this should ideally be the comparison relation of `Lock`.
Reviewed By: mityal
Differential Revision: D17602827
fbshipit-source-id: 4f4576c1a
Summary:
This diff generates a symbolic value when a function returns only
exceptions. Previously, the exception expression is evaluated to top,
thus it was propagated to other functions, which made those costs as
top. For preventing that situation, this diff changed:
* exception expressions are evaluated to bottom, and
* if callee's return value is bottom, it generates a symbolic value
for it.
Reviewed By: ezgicicek
Differential Revision: D17500386
fbshipit-source-id: 0fdcc710d
Summary: This diff introduces an inequality for the size alias targets, in order to get preciser array lengths after loops. The alias domain in inferbo was able to express strict equality between alias source and its targets, e.g. x=size(array). Now, for the size alias target, it can express less than or equal relations, e.g. x>=size(array).
Reviewed By: ezgicicek
Differential Revision: D17606222
fbshipit-source-id: 2557d3bd0
Summary: Component.Builder has its own non-required props that are inherited by the MyComponent.Builder. Add tests where these common props are set in the chain of calls.
Reviewed By: Katalune
Differential Revision: D17710294
fbshipit-source-id: f3c5ef28c
Summary:
Unfortunately it is very hard to predict when
`Typ.Procname.describe` will add `()` after the function name, so we
cannot make sure it is always there.
Right now we report clowny stuff like "error while calling `foo()()`",
which this change fixes.
Reviewed By: ezgicicek
Differential Revision: D17665470
fbshipit-source-id: ef290d9c0
Summary: `Prop(varArg = myProp) List <?> myPropList` can also be set via `myPropList()` or `myProp()`. Add support for picking up the `varArg` and checking this form of required props.
Reviewed By: ngorogiannis
Differential Revision: D17571997
fbshipit-source-id: 7956cb972
Summary:
Turns out, we did not have such a test in place.
Known issue: we report over-annotated warnings for each fields N times,
one per constructor, which is wrong.
Reviewed By: artempyanykh
Differential Revision: D17574791
fbshipit-source-id: def992691
Summary:
This diff avoids giving the top value to unknown globals in Java,
because they harm precision of the cost checker. Instead, it doesn't
subst the global symbols at function calls.
Reviewed By: ezgicicek
Differential Revision: D17498714
fbshipit-source-id: d1215b3aa
Summary:
This diff adds an eval mode for the substitutions of the cost results, in order to avoid precision
loss by joining two symbols.
The usual join of two different symbolic values, `s1` and `s2`, becomes top due to the limitation of
our domain. On the other hand, in the new eval mode, it returns an upperbound `s1+s2`, because the
cost values only care about the upperbounds.
Reviewed By: ezgicicek
Differential Revision: D17573400
fbshipit-source-id: 2c84743d5
Summary:
This was causing a crash, because when trying to create a procname from a block at that point we don't have the block return type, which is needed for the name. I don't understand why BlockDecl doesn't contain the type, but I looked again and it doesn't (also in clang). So in general we need to pass it from the context, but that's not possible in this case.
Also, one could argue that such a block is not a method from the struct, since it's just a block that is assigned to a field as initialization.
Reviewed By: skcho
Differential Revision: D17575197
fbshipit-source-id: 3974ead3f
Summary:
This continues work for eliminating Annot.Item.t from Nullsafe low-level
code.
The introduced function `from_nullsafe_type` is called when we infer
initial type of the equation based on the function or field formal signature.
Before that, we did it via reading the annotation directly, which
complicates the logic and making introducing Unknown nullability tricky.
## Clarifying the semantics of PropagatesNullable
This diff also clarifies (and changes) the behavior of PropagatesNullable params.
Previously, if the return value of a function that has PropagatesNullable params was
annotated as Nullable, nullsafe was effectively ignoring PropagatesNullable effect.
This is especially bad because one can add Nullable annotation based on the logic "if the function can return `null`, it should be annotated with Nullable`.
In the new design, there is no possibility for such a misuse: the code that
applies the rule "any param is PropagatesNullable hence the return
value is nullable even if not explicitly annotated" lives in NullsafeType.ml, so
this will be automatically taken into account.
Meaning that now we implicitly deduce Nullable annotation for the return value, and providing it explicitly as an alternative that does not change the effect.
In the future, we might consider annotating the return value with `Nullable` explicit.
Reviewed By: jvillard
Differential Revision: D17479157
fbshipit-source-id: 66c2c8777
Summary:
In the cost checker, the range of selected control variables are used to estimate the number of loop iteration. However, sometimes the ranges of control variables are not related to how many times the loop iteration. This diff strengthens the condition for them as:
1. integers from `size` models
2. integers constructed from `+` or `-`
3. integers constructed from `*`
For the last one, the loop iteration is likely to be log scale of the range of the control variable:
```
while (i < c) {
i *= 2;
}
```
We will address this in the future.
Reviewed By: ezgicicek
Differential Revision: D17365796
fbshipit-source-id: c1e709ae8
Summary: Our annotation parameter parsing is too primitive to identify `resType` and before we only assumed that all Prop's can be set by any of the two suffixes: `Attr` and `Res`. After talking to Litho team, there is 3 more additions to these suffixes: `Dip`, `Sip`, and `Px`.
Reviewed By: ngorogiannis
Differential Revision: D17528482
fbshipit-source-id: 8d7f49130
Summary: Before, we were mistakenly checking any annotation that ends with Prop such as TreeProp. This was wrong. Instead, we should only check Prop as adviced by the Litho team.
Reviewed By: ngorogiannis
Differential Revision: D17527769
fbshipit-source-id: b753dd87a
Summary:
Introduce a new experimental checker (`--impurity`) that detects
impurity information, tracking which parameters and global variables
of a function are modified. The checker relies on Pulse to detect how
the state changes: it traverses the pre and post pairs starting from
the parameter/global variable and finds where the pre and post heaps
diverge. At diversion points, we expect to see WrittenTo/Invalid attributes
containing a trace of how the address was modified. We use these to
construct the trace of impurity.
This checker is a complement to the purity checker that exists mainly
for Java (and used for cost and loop-hoisting analyses). The aim of
this new experimental checker is to rely on Pulse's precise
memory treatment and come up with a more precise im(purity)
analysis. To distinguish the two checkers, we introduce a new issue
type `IMPURE_FUNCTION` that reports when a function is impure, rather
than when it is pure (as in the purity checker).
TODO:
- improve the analysis to rely on impurity information of external
library calls. Currently, all library calls are assumed to be nops,
hence pure.
- de-entangle Pulse reporting from analysis.
Reviewed By: skcho
Differential Revision: D17051567
fbshipit-source-id: 5e10afb4f
Summary:
`ModeledRange` represents how many times the interval value can be updated by modeled functions. This
domain is to support the case where there are mismatches between value of a control variable and
actual number of loop iterations. For example,
```
while((c = file_channel.read(buf)) != -1) { ... }
```
the loop will iterates as the file size, but the control variable `c` does not have that value. In
these cases, it assigns a symbolic value of the file size to the modeled range of `c`, then which
is used when calculating the overall cost.
Reviewed By: jvillard
Differential Revision: D17476621
fbshipit-source-id: 9a81376e8
Summary:
This diff extends the `Simple` alias domain to address Java's
temporary variables better. It now has an additional field to denote
an alias temporary variable.
Reviewed By: jvillard
Differential Revision: D17421907
fbshipit-source-id: 8b8b47461
Summary:
D17397144 adds dedicated tests for condition redundant.
We also have tests for overannotated methods.
This makes these test cases redundant. Let's not pollute the results.
Reviewed By: jberdine
Differential Revision: D17398757
fbshipit-source-id: 10f6beeca
Summary:
This will simplify modifying functionality around this type of error.
Also rename the file for clarity.
Reviewed By: jvillard
Differential Revision: D17397144
fbshipit-source-id: 552215243
Summary:
This diff revises widening functions of bounds that have a linear form and a min/max form.
For example, for lower bounds,
* 3 ▽ (1+min(2, x)) = (1+min(2, x))
* 3+x ▽ (3+min(2, x)) = (3+min(2, x))
Reviewed By: jvillard
Differential Revision: D17420786
fbshipit-source-id: ff9eebed3
Summary:
This diff addresses collection adds in loop. For example,
```
ArrayList<...> a = new ArrayList<>();
for (int i = 0; i < size; i++) {
a.add(...);
}
// we want to know the size of `a` here!
```
This is a common pattern on initializing a collection in Java.
How we did: Instead of adopting general (but complicated) solutions such as relational domain, we
extended the current alias domain of inferbo, to be able to handle this specific case:
* An array `a` should have size 0, at the entry of the loop.
* The iterating variable `i` should start with 0.
* `add` should be called once inside the loop.
Reviewed By: jvillard
Differential Revision: D17319350
fbshipit-source-id: 99b6acae1
Summary:
In D17156724, we forked nullsafe tests, which was a strategy to
introduce nullsafe-gradual mode back then.
The reason was "gradual" mode is a pretty big change in a way Infer
handles annotations, so we wanted to tests both scenarios: gradual and
non-gradual mode.
The plan was to deprecate "non-gradual" tests at some point, hence we
decided to go with duplication.
Now we have a better approach to ensure "gradual" features are well
covered. The approach is the following.
1. [Mostly finished] Improve existings tests so that they cover negative and positive
cases. With this, we can safely add something like
--non-annotated-default UNKNOWN_NULLABILITY to the test config and be sure tests still make
sense (i.e. don't pass simply because annotations don't make sense
anymore)
2. [In progress]. Refactor nullsafe code so that instead of using of Annot.ml everywhere we use a special abstraction telling if the class is annotated with Nullable, Nonnull, or not annotated. With this change, we essenstially have a single place we need to test, which removes the need to have 2 pair of tests for each feature.
3. [To be done]. Introduce Uknown nullability and add small number of tests specifically
for that feature (together with existing tests).
NOTE: I did not rename `nullsafe-default` back to `nullsafe` to not
pollute blame without need.
Reviewed By: artempyanykh
Differential Revision: D17395743
fbshipit-source-id: 3d3e062f6
Summary:
Get rid of helper class `C`, normal Object serves the same goal well
Don't return values from a function, focus only on nullable
dereferences.
Reviewed By: jberdine
Differential Revision: D17314569
fbshipit-source-id: d70e66b5f
Summary:
1. Split into 3 subclasses for 3 major set of features we test
2. Document a known FP
3. More clear names
Reviewed By: jberdine
Differential Revision: D17285902
fbshipit-source-id: 66e3b5668
Summary:
Let's consolidate "positive" and "negative" cased together by adding an example
of not annotated class as a source of "negative" cases.
Also join the case with modelled methods to the same class.
Reviewed By: jberdine
Differential Revision: D17284101
fbshipit-source-id: e15e60691
Summary:
There are currently plenty of ways to suppress the warning, including Inject, Initializer, and SuppressFieldNotInitialized annotations.
This one (annotating field with Nonnull) is counter-intuitive and does not align with gradual nullsafe
semantics we are working on.
Reviewed By: artempyanykh
Differential Revision: D17281702
fbshipit-source-id: 132e1b687
Summary:
This diff ignores character symbols in the cost results, in order to
avoid FPs from parser code.
Reviewed By: ezgicicek
Differential Revision: D17132053
fbshipit-source-id: d9cf8bd26
Summary: let's always have positive and negative case for each feature we test
Reviewed By: ngorogiannis
Differential Revision: D17206785
fbshipit-source-id: 5791ace48
Summary:
1. Let's move it to the file dedicated to this particular warning.
2. Make it more general (Activity was just a particular case) and describe in comments what it really does.
Reviewed By: ngorogiannis
Differential Revision: D17205919
fbshipit-source-id: 82bf5e9bd
Summary:
1. Remove boilerplate with builder that uses builder initializer; it
demostates a usecase but it is not really relevant for the test so it
distracts attention.
Instead, describe the usecase in the comment
2. Add good and bad cases so it is obvious what exactly do we test.
Reviewed By: artempyanykh
Differential Revision: D17204969
fbshipit-source-id: 005ea078b
Summary:
Let's combine with the one that tests a very similar thing for known
cleanup methods
Reviewed By: ngorogiannis
Differential Revision: D17204206
fbshipit-source-id: dbdbde903
Summary:
1. Remove manipulations with "shadowed" fields and abstract class, I don't believe they produced high quality signal (and no related warnings in the test output).
2. For each failure case provide corresponding success case and the
reverse
Reviewed By: artempyanykh
Differential Revision: D17203240
fbshipit-source-id: c809857ed
Summary:
1. Let's make the intention of the test more visible, also let's provide an example
when the error does occur.
2. `onDestroy` silence "field not nullable" warnigs not only for `View`, but for any objects, so let's use `String` (as an example of a trivial object) instead.
Original diff that introduced the test: D10024458
Reviewed By: artempyanykh
Differential Revision: D17202839
fbshipit-source-id: 037d937e4
Ezgi Çiçek
Dulma Churchill
Nikos Gorogiannis
Sungkeun Cho
Jules Villard
Mitya Lyubarskiy