Summary:
Communicate new facts from the arithmetic domain to the memory domain to
detect contradictions between the two.
Reviewed By: jberdine
Differential Revision: D24832079
fbshipit-source-id: 2caf8e9af
Summary:
This is several inter-connected changes together to keep the tests
happy.
The ConditionalOperator `b?t:e` is translated by first creating a
placeholder variable to temporarily store the result of the evaluation
in each branch, then the real thing we want to assign to reads that
variable. But, there are situations where that changes the semantics of
the expression, namely when the value created is a struct on the stack
(eg, a C++ temporary). This is because in SIL we cannot assign the
*address* of a program variable, only its contents, so by the time we're
out of the conditional operator we cannot set the struct value
correctly anymore: we can only set its content, which we did, but that
results in a "shifted" struct value that is one dereference away from
where it should be.
So a batch of changes concern `conditionalOperator_trans`:
- instead of systematically creating a temporary for the conditional,
use the `trans_state.var_exp_typ` provided from above if available
when translating `ConditionalOperator`
- don't even set anything if that variable was already initialized by
merely translating the branch expression, eg when it's a constructor
- fix long-standing TODO to propagate these initialization facts
accurately for ConditionalOperator (used by `init_expr_trans` to also
figure out if it should insert a store to the variable being
initialised or not)
The rest of the changes adapt some relevant other constructs to deal
with conditionalOperator properly now that it can set the current
variable itself, instead of storing stuff inside a temp variable. This
change was a problem because some constructs, eg a variable declaration,
will insert nodes that set up the variable before calling its
initialization, and now the initialization happens *before* that setup,
in the translation of the inner conditional operator, which naturally
creates nodes above the current one.
- add a generic helper to force a sequential order between two
translation results, forcing node creation if necessary
- use that in `init_expr_trans` and `cxxNewExpr_trans`
- adjust many places where `var_exp_typ` was incorrectly not reset when translating sub-expressions
The sequentiality business creates more nodes when used, and the
conditionalOperator business uses fewer temporary variables, so the
frontend results change quite a bit.
Note that biabduction tests were invaluable in debugging this. There
could be other constructs to adjust similarly to cxxNewExpr that were
not covered by the tests though.
Added tests in pulse that exercises the previous bug.
Reviewed By: da319
Differential Revision: D24796282
fbshipit-source-id: 0790c8d17
Summary: We recently introduced a more precise model for constructing an optional from a value by making a shallow copy. However, this introduced Use After Delete false positives. For now, we go back to a less precise model by creating a fresh value. A proper model would be to either make a deep copy or call the copy constructor for a value. We will address this in the following diff.
Reviewed By: jvillard
Differential Revision: D24826749
fbshipit-source-id: 3e5e4edeb
Summary: Refactor `folly::Optional` models to make them easier to reuse for `std::optional`
Reviewed By: jvillard
Differential Revision: D24760053
fbshipit-source-id: f665e84c8
Summary: `folly::Optional::value()` returns a reference, hence an error was shown when the actual value was being accessed. Since `value()` throws an exception in case of `folly::none`, we want to show the error message at the call site of `value()`. We do this by dereferencing the result of `value()` in the model.
Reviewed By: jvillard
Differential Revision: D24702875
fbshipit-source-id: ca9f30349
Summary:
Before we were creating a fresh internal value when we were constructing `folly::Optional`. This diff models `folly::Optional` constructor more precisely by copying the given value.
There was also a missing dereference in the model of `value_or`
Reviewed By: jvillard
Differential Revision: D24621016
fbshipit-source-id: c86d3c157
Summary: Model `folly::Optional::value_or(default)` to return value if not-empty and `default` if empty.
Reviewed By: jvillard
Differential Revision: D24539456
fbshipit-source-id: cc9e176cc
Summary:
This diff adds an option hiding function pointers in costs to users: `cost-suppress-func-ptr` is
true by default.
Reviewed By: ezgicicek
Differential Revision: D24448212
fbshipit-source-id: 88f6b5ea1
Summary:
Take another page from the Incorrectness Logic book and refrain from reporting issues on paths unless we know for sure that this path will be taken.
Previously, we would report on paths that are merely *not impossible*. This goes very far in the other direction, so it's possible we'll want to go back to some sort of middle ground. Or maybe not. See the changes in the tests to get a sense of what we're missing.
Reviewed By: ezgicicek
Differential Revision: D24014719
fbshipit-source-id: d451faf02
Summary:
Upgrade to latest clang release, needed for xcode12.
clang-8/9 won't be able to read the Xcode 12 SDK since there's annotations that will fail compilation.
Also removing unused (and hard to compile) binary `ast_exporter_bin` from facebook-clang-plugins/libtooling.
Reviewed By: ngorogiannis
Differential Revision: D23780089
fbshipit-source-id: 2314125a9
Summary:
Nullifying these leads to observable side-effects, like in the added
test.
Reviewed By: da319
Differential Revision: D23759756
fbshipit-source-id: 559a6486b
Summary: Structs captured both by reference or by value should have reference in their type. Struct captured by value should first call copy constructor. In this diff we fix the type of the captured variable to include reference. Copy constructor injection is left for the future.
Reviewed By: jvillard
Differential Revision: D23688713
fbshipit-source-id: d13748b5d
Summary: Variables captured without initialization do not have correct type inside lambda's body. This diff sets the correct type of captured reference variables inside procdesc and makes sure the translation of captured variables is correct. The translation of lambda's body will then take into account the type of captured var from procdesc.
Reviewed By: jvillard
Differential Revision: D23678371
fbshipit-source-id: ed16dc978
Summary: Add missing reference to the type of variable captured by reference without initialization.
Reviewed By: jvillard
Differential Revision: D23567685
fbshipit-source-id: b4e2ac0b6
Summary:
We were missing assignment to captured variables with initializers.
Consider the following example:
```
S* update_inside_lambda_capture_and_init(S* s) {
S* object = nullptr;
auto f = [& o = object](S* s) { o = s; };
f(s);
return object;
}
```
which was translated to
```
VARIABLE_DECLARED(o:S*&);
*&o:S*&=&object
*&f =(_fun...lambda..._operator(),([by ref]&o &o:S*&))
```
However, we want to capture `o` (which is an address of `object`), rather `&o` in closure.
After the diff
```
VARIABLE_DECLARED(o:S*&);
*&o:S*&=&object
n$7=*&o:S*&
*&f =(_fun...lambda..._operator(),([by ref]n$7 &o:S*&))
```
Reviewed By: jvillard
Differential Revision: D23567346
fbshipit-source-id: 20f77acc2
Summary:
This can be useful to make pulse forget about tricky parts of the code.
Treat "skipped" procedures as unknown so heuristics for mutating the
return value and parameters passed by reference are applied.
Reviewed By: ezgicicek
Differential Revision: D23729410
fbshipit-source-id: d7a4924a8
Summary: Added a model for copy constructor for `std::function`. In most cases, the SIL instruction `std::function::function(&dest, &src)` gives us pointers to `dest` and `src`, hence, we model the copy constructor as a shallow copy. However, in some cases, e.g. `std::function f = lambda_literal`, SIL instruction contains the closure itself `std::function::function(&dest, (operator(), captured_vars)`, hence, we need to make sure we copy the right value.
Reviewed By: ezgicicek
Differential Revision: D23396568
fbshipit-source-id: 0acb8f6bc
Summary: There was a mismatch between formals and actuals in `std::function::operator()` because we were not passing the first argument corresponding to the closure.
Reviewed By: ezgicicek
Differential Revision: D23372104
fbshipit-source-id: d0f9b27d6
Summary: When we evaluate lambdas in pulse, we create a closure object with `fake` fields to store captured variables. However, during the function call we were not linking the captured values from the closure object. We address this missing part here.
Reviewed By: jvillard
Differential Revision: D23316750
fbshipit-source-id: 14751aa58
Summary:
`delete` works exactly like `free` so merge both models together. Also
move the `free(0)` test to nullptr.cpp as it seems more appropriate.
Reviewed By: da319
Differential Revision: D23241297
fbshipit-source-id: 20a32ac54
Summary: Before we were modelling `vector.end()` as returning a fresh pointer every time is was called. It is common to check if an iterator is not the `end()` iterator and proceed to dereference the iterator in that case. In such code pattern `vector.end()` is called twice and returns different fresh values which causes false positives. To fix this, we add a special internal field `__infer_model_backing_array_pointer_to_last_element` to a vector to denote its end. Now, every time we call `vector.end()` we return the value of this field. We introduce a new attribute `EndOfCollection` to mark `end` iterator as the existing `EndIterator` invalidation is not suitable when we need to read the same value multiple times.
Reviewed By: jvillard
Differential Revision: D23101185
fbshipit-source-id: fa8a33b58
Summary:
This time it's personal.
Roll out pulse's own arithmetic domain to be fast and be able to add
precision as needed. Formulas are precise representations of the path
condition to allow for good inter-procedural precision. Reasoning on
these is somewhat ad-hoc (except for equalities, but even these aren't
quite properly saturated in general), so expect lots of holes.
Skipping dead code in the interest of readability as this (at least
temporarily) doesn't use pudge anymore. This may make a come-back as
pudge has/will have better precision: the proposed implementation of
`PulseFormula` is very cheap so can be used any time we could want to
prune paths (see following commits), but this comes at the price of some
precision. Calling into pudge at reporting time still sounds like a good
idea to reduce false positives due to infeasible paths.
#skipdeadcode
Reviewed By: skcho
Differential Revision: D22576004
fbshipit-source-id: c91793256
Summary: To avoid dead store false positives we skip initialization of a variable that has an `unused` attribute. However, this causes uninitialized value false positives when the variable is later used in macros. To fix this, instead of skipping initialization we record the information about `unused` attribute in local variable data that we can later use for filtering out dead store issues.
Reviewed By: jvillard
Differential Revision: D22868050
fbshipit-source-id: 4a2d0e680
Summary:
We get duplicated variable declaration instruction for primitive type variable initialized using list initializer, e.g.
```
int* p{nullptr};
```
This happens because we add variable declaration instruction when we translate both `DeclStmt` and `InitListExpr`. To fix this, we do not add the duplicated variable declaration when we translate `InitListExpr`.
Reviewed By: jvillard
Differential Revision: D22844726
fbshipit-source-id: 422806924
Summary: We model internal builtin `__new` function to return a non-null value. This fixes nullptr_dereference false positives where we explicitly check the result of a function call for nullptr when the function returns a newly created object.
Reviewed By: jvillard
Differential Revision: D22772217
fbshipit-source-id: 37d209697
Summary:
Add a test to the repo to try and detect perf regressions in pulse.
Currently analyzed in ~0.1s. With `--pudge`, takes ~10s.
Sledge does eager normalization and canonicalization when incorporating new facts into formula contexts and the algorithm is polynomial in the number of equalities. This example generates one equality per location in the array => boom. This bypasses the recency model of arrays because the formula needs to be constructed before it can be simplified to get rid of dead variables.
The new arithmetic is not as complete as sledge's algorithm but linear in time. We could use it to simplify the formula *before* passing it to sledge. In fact, that was the original motivation.
Reviewed By: skcho
Differential Revision: D22574366
fbshipit-source-id: e9044ae09
Summary:
When applying function summaries, we are careful not to violate the
summary's assumptions about non-aliasing. For example, the summary we
generate for `foo(x,y) { *x = *y; }` will have `x` and `y` be allocated
to two different `AbstractValue.t` in the heap, representing
disjointness.
However, the current logic is too coarse and also rejects passing the
same pure value to functions that made no assumption about them being
equal or different, eg `goo(int x,int y) { int z = x + y; }`. This is
because the corresponding `AbstractValue.t` are different in the
callee's summary, but are represented by only one same value in callers
such as `goo(i,i)`.
This diff restricts the "don't violate aliasing" condition to only
consider heap-allocated values. This is consistent with separation logic
by the way: we use the implication `x|->- * y|->- |- x≠y`, which is
valid only when both `x` and `y` are both allocated in the heap as in
the left-hand-side of `|-`.
Reviewed By: skcho
Differential Revision: D22574297
fbshipit-source-id: 206a18499
Summary: Lambda is called using `operator()`. We need to know the information of captured variables when `operator()` procedure is being analysed. This diff records lambda captured variables in `operator()` procdesc. The complication arises from the fact that procdesc for `operator()` is created before translating lambda expression or during the translation of lambda expression where captured variables are translated. To solve this issue, we update existing `operator()` procdesc attributes with captured variable information when we translate lambda expression.
Reviewed By: jvillard
Differential Revision: D22374495
fbshipit-source-id: 44909adea
Summary:
We update the type of captured variables to include information about capture mode (`ByReference` or `ByValue`) both for procdesc attributes and the closure expression.
For lambda: closure expression now contains correct capture mode for capture variables. Procdesc still does not contain information about captured variables which we will address in the next diff.
For objc blocks: at the moment all captured variables have mode `ByReference`. Added TODOs to fix this.
Reviewed By: jvillard
Differential Revision: D22572054
fbshipit-source-id: 4c88678ee
Summary:
As title
Model `NSString` as `JavaString`.
Since `NSArray` does not contain information about its type of element, we do not use associate string with collection as in Java and C++. In Java, String model is implemented using java collection, and for C++, string model is implemented using vector.
So instead, we use existing `JavaString` model.
Reviewed By: skcho
Differential Revision: D22431949
fbshipit-source-id: 7cdde1ad7
Summary: To avoid NULLPTR_DEREFERENCE false positives we want to model some functions as returning non-null. A new flag --pulse-model-return-nonnull allows us to provide a list of such functions.
Reviewed By: ezgicicek
Differential Revision: D22431564
fbshipit-source-id: 9944c7382
Summary: This diff prevents printing line numbers of loop in the trace description, which helps to keep the same descriptions even when the line number of a function is changed in tests.
Reviewed By: ezgicicek
Differential Revision: D22375584
fbshipit-source-id: 676d1a7cc
Summary:
Keyword `thread_local` in cpp allows us to create a variable with thread storage duration, meaning that the object's lifetime begins when the thread begins and ends when the thread ends.
We get `NULLPTR_DEREFERENCE` false positive for `thread_local` variable since we reallocate it in the `VariableLifetimeBegins` metadata instruction and we do not see further updates to the variable. To solve the issue we special case `VariableLifetimeBegins` instruction for global variables.
Reviewed By: jvillard
Differential Revision: D22284135
fbshipit-source-id: 13c14ef90
Summary:
We need to check if `folly::Optional` is not `folly::none` if we want to retrieve the value, otherwise a runtime exception is thrown:
```
folly::Optional<int> foo{folly::none};
return foo.value(); // bad
```
```
folly::Optional<int> foo{folly::none};
if (foo) {
return foo.value(); // ok
}
```
This diff adds a new issue type that reports if we try to access `folly::Optional` value when it is known to be `folly::none`.
Reviewed By: ezgicicek
Differential Revision: D22053352
fbshipit-source-id: 32cb00a99
Summary: Pulse has now a better version of this check, so let's delete it.
Reviewed By: ngorogiannis
Differential Revision: D22019247
fbshipit-source-id: 344678225
Summary:
This issue type was not giving good results and can be replaced by
Pulse's version.
Reviewed By: ngorogiannis
Differential Revision: D22019551
fbshipit-source-id: 5cf3db46d
Summary: To avoid NULLPTR_DEREFERENCE false positives we want to treat some functions as `abort`. A new flag `--pulse-model-abort` allows us to provide a list of such functions.
Reviewed By: ezgicicek
Differential Revision: D21962555
fbshipit-source-id: d46b93c99
Summary: The new memory leaks analysis is now ready to be enabled by default and turned on in production. This also replaces the biabduction one which is now disabled.
Reviewed By: jvillard
Differential Revision: D21998666
fbshipit-source-id: 9cd95e894
Summary: Assigning `nullptr` to `std::function` was causing `NULLPTR_DEREFERENCE` as our model was expecting to get an object in the right hand side of the assignment (`std::function::operator=`) and was dereferencing that object. Assigning `nullptr` to `std::function` removes callable object from it. We model this special case by creating a fresh value.
Reviewed By: skcho
Differential Revision: D21685318
fbshipit-source-id: 2d4af1933
Summary:
Introduce BIABD_ prefixes for a few issue types that were duplicated
between analyses, and also prefix the lab exercise issue type to avoid
sharing with biabduction.
Reviewed By: ngorogiannis
Differential Revision: D21660226
fbshipit-source-id: 3435916e6
Summary: In an intra-procedural analysis, we assume that parameters passed by reference to a function will be initialized inside that function. To do that we use the type information of a formal parameter to initialize the fields of the struct. This was causing false positives if the formal parameter in function signature had type `void*`. To solve this, we used type information from local variables instead. However, we also get false positives for any kind of pointer if we use cast. We fix this by using type information of local variables as in `void*` case.
Reviewed By: jvillard
Differential Revision: D21522979
fbshipit-source-id: 4222ff134
Summary: Currently we get false positive if we apply `operator--` to the `end()` iterator. To solve this, we model iterator `operator--` not to raise an error for the `EndIterator` invalidation, but to create a fresh element in the underlying array.
Reviewed By: ezgicicek
Differential Revision: D21476353
fbshipit-source-id: 5c722372e
Summary:
It is undefined behavior to dereference end iterator.
To catch end iterator dereferencing issues we change iterator model: instead of having `internal pointer` storing the current index, we model it as a pointer to a current index. This allows us to model `end()` iterator as having an invalid pointer and there is no need to create an invalidated element in the vector itself.
Reviewed By: ezgicicek
Differential Revision: D21178441
fbshipit-source-id: fd6a94b0b
Summary: The contract for reporting races in C++ is to flag races between writes under lock with reads without a lock. This diff restores that contract which had been violated by recent changes.
Reviewed By: jberdine
Differential Revision: D21383876
fbshipit-source-id: 6a84e1506
Summary:
List of things happening in this unreviewable diff:
- moved PulsePathCondition to PulseSledge
- renamed --pulse-path-conditions to --pudge
- PulsePathCondition now contains all the arithmetic of pulse
(inferbo+concrete intervals+pudge). In particular, moved arithmetic
attributes into PulsePathCondition.t. PulsePathCondition plays the
role of PulseArithmetic (combining all domains).
- added tests for a false positive involving free()
- PulseArithmetic is now just a thin wrapper around PulsePathCondition
to operate on states directly (instead of on path conditions).
- The rest is mostly moving code into PulsePathCondition (eg, from
PulseInterproc) and adjusting it.
Reviewed By: jberdine
Differential Revision: D21332073
fbshipit-source-id: 184c8e0a9
Summary:
The C++ tests were a bit of a mess. This diff tries to enforce the following principles:
- mark every function with `_ok` or `_bad` so that when a function appears in `issues.exp` it's easy to figure out the intention;
- mark every false negative and positive with `FP_` and `FN_` to document expectations;
- make every function access one field and participate in at most one issue report so that it's easier to assess changes.
Reviewed By: jvillard
Differential Revision: D21278627
fbshipit-source-id: 9698f716f
Summary:
We were invalidating "*(vec.__infer_backing_array)" instead of the
address of the field itself.
Reviewed By: ezgicicek
Differential Revision: D21280357
fbshipit-source-id: 48b984800
Summary:
The directory names had some interesting variety due to historical
reasons.
- {c,cpp,objc,objcpp}/errors/ date from the time when infer was only
biabduction
- java/infer/ dates from the time when we had an "--analyzer" option and
"infer" was one of them (sic), and eg another was "eradicate".
- c/biabduction/ dates from the time when the biabduction analysis was
being migrated to the "checkers" (AI) framework. For some reasons the
tests there are not a subset of c/infer/ but seem to be entirely new
tests.
The convention now dictates that we should name all of these
*/biabduction/. This diff moves the existing tests from c/biabduction/
into c/biabduction/misc/.
Reviewed By: mityal
Differential Revision: D21300147
fbshipit-source-id: 516d1cb15
Summary: Iterator invalidation traces were based on vector rather than iterator itself.
Reviewed By: ezgicicek
Differential Revision: D21202047
fbshipit-source-id: 62ce8a488
Summary:
We ignored allocator models for vectors, and were not able to initialize vectors properly. This diff fixes this issue.
It also adds a test which was a FN before.
Reviewed By: skcho, jvillard
Differential Revision: D21089492
fbshipit-source-id: 6906cd1d1
Summary: D21155014 replaced `skip` call with a Load but this was not right. Instead, let's add a new builtin function (rather than skip) so that other analyses can freely model it as they want.
Reviewed By: jvillard
Differential Revision: D21178286
fbshipit-source-id: c214ccfb0
Summary:
Replace horrible hack with ok hack.
The main difficulty in implementing the disjunctive domain is to avoid
the quadratic time complexity of executing the same disjuncts over and
over again when going around loops:
First time around a loop, assuming for example a single disjunct `d`:
```
[d]
loop body
[d1' \/ d2']
```
Second time around the same loop: the new pre will be the join of the
posts of predecessor nodes, so `old_pre \/ post(loop,old_pre)`, i.e.
`d \/ d1' \/ d2'`. Now we need to execute `loop body` again
*without running the symbolic execution of `d` again* (and the time after
that we'll want to not execute `d`, `d1'`, or `d2'`).
Horrible hack (before): Disjuncts have a boolean "visited" attached
that does its best to keep track of whether a given disjunct is old or
new. When executing a single *instruction* look at the flag and skip the
state if it's old. Of course we have no way to know for sure so it turns
out it was often wrongly re-executing old disjuncts. This was also
producing the wrong results over even simple loops: only the last
iteration would make it outside the loop for some reason. Overall, the
semantics were pretty untractable and shady at best.
New hack (this diff): only run instructions of a given *node* on
disjuncts that are not physically equal to the "pre" ones already in the
invariant map for the current node.
This gives the correct result over simple loops and a nice performance
improvement in general (probably the old heuristic was hitting the
quadratic bad case more often).
Reviewed By: skcho
Differential Revision: D21154063
fbshipit-source-id: 5ee38c68c
Summary:
We translated the expression `CXXStdInitializerListExpr` naively in D3058895 as a call to
a skip function, with the hope that it would be translated better in the future. However, the naive means that we lose access to the initialized list/array because we are simply skipping it. So, even if we want to model the initializer properly, we have to deal with the skip specially.
This diff tries to solve this problem by removing the skip call whenever
possible. Instead, we translate the underlying array/list as a Load, so
that when it is passed to the constructor, we can pick it up.
For the following initialization:
``` std::vector<int*> vec = {nullptr};
```
Before, we translated it as
```
*&0$?%__sil_tmpSIL_materialize_temp__n$7[0]:int* const =null
n$8=_fun___infer_skip_function(&0$?%__sil_tmpSIL_materialize_temp__n$7:int* const [1*8] const )
n$9=_fun_std::vector<int*,std::allocator<int*>>::vector(&vec:std::vector<int*,std::allocator<int*>>*,n$8:std::initializer_list<int*>)
```
However, this means, `n$8` would be result of something skipped which we can't reason about. Instead, we just pass the underlying initialized array now, so we get the following translation:
```
*&0$?%__sil_tmpSIL_materialize_temp__n$7[0]:int* const =null
n$8=*&0$?%__sil_tmpSIL_materialize_temp__n$7:int* const [1*8] const
n$9=_fun_std::vector<int*,std::allocator<int*>>::vector(&vec:std::vector<int*,std::allocator<int*>>*,n$8:std::initializer_list<int*>)
```
Reviewed By: jvillard
Differential Revision: D21155014
fbshipit-source-id: 75850b1e6
Summary:
When encountering a constant, pulse creates an abstract value (a
variable) to represent it, and remembers that it's equal to it. The
problem is that pulse doesn't yet know how to deal with the fact that
some variables are going to be equal to each other.
This hacks around this issue in the case of constants, within the same
procedure, by remembering which constants have been assigned to which
place-holder variables, and serving those variables again when the same
constant is translated again.
Limitation: this doesn't work across procedure calls as the "constant
maps" are not saved in summaries.
Something to look out for: we don't want to make `if (p == NULL)` create
a path where `p` is invalid (we only make null invalid when we see an
assignment from 0, i.e. `p = NULL;`).
Reviewed By: ezgicicek
Differential Revision: D21089961
fbshipit-source-id: 5ebb85d0a
Summary: Modeling vector iterator with two internal fields: an internal array and an internal pointer. The internal array field points to the internal array field of a vector; the internal pointer field represents the current element of the array. For now `operator++` creates a fresh element inside the array.
Reviewed By: ezgicicek
Differential Revision: D21043304
fbshipit-source-id: db3be49ce
Summary:
Add a path condition to each symbolic state, represented in sledge's arithmetic domain. This gives a precise account of arithmetic constraints. In particular, it is relation and thus is more robust in the face of inter-procedural analysis.
This is gated behind a flag for now as there are performance issues with the new arithmetic.
Reviewed By: jberdine
Differential Revision: D20393947
fbshipit-source-id: b780de22a
Summary:
This diff revises how to handle the unknown location in inferbo in two ways:
* stop appending field to the `Unknown` location, e.g. `Unknown.x.a` is evaluated to `Unknown`
* redesign the abstract of multiple locations, like `Bottom` < `Unknown` < `Known` locations
I am doing them in one diff since applying only one of them showed bad results.
Background: `Unknown` was adopted for abstracting all unknown concrete locations, so we could avoid missing semantics of assignments to unknown locations. We tried to keep soundness. However, it brought some other problems related to precision and performance.
1. Sometimes especially when Inferbo failed to reason precise pointer values, `Unknown` may point to many other abstract locations.
2. At that time, value assignments to `*Unknown` makes the situation worse: many abstract locations are updated with imprecise values.
This problem harmed not only its precision, but also its performance since it introduced more location entries in the abstract memory.
Reviewed By: jvillard
Differential Revision: D21017789
fbshipit-source-id: 0bb6bd8b5
Summary:
As soon as pulse detects an error, it completely stops the analysis and loses the state where the error occurred. This makes it difficult to debug and understand the state the program failed. Moreover, other analyses that might build on pulse (e.g. impurity), cannot access the error state.
This diff aims to restore and display the state at the time of the error in `PulseExecutionState` along with the diagnostic by extending it as follows:
```
type exec_state =
| represents the state at the program point that caused an error *)
```
As a result, since we don't immediately stop the analysis as soon as we find an error, we detect both errors in conditional branches simultaneously (see test result changes for examples).
NOTE: We need to extend `PulseOperations.access_result` to keep track of the failed state as follows:
```
type 'a access_result = ('a, Diagnostic.t * t [denoting the exit state] ) result
```
Reviewed By: jvillard
Differential Revision: D20918920
fbshipit-source-id: 432ac68d6
Summary: Consider functions that simply exit as impure by extending the impurity domain with `AbstractDomain.BooleanOr` that signifies whether the program exited.
Reviewed By: skcho
Differential Revision: D20941628
fbshipit-source-id: 19bc90e66
Summary:
This diff distinguishes array declaration and size-setting in trace. For example, when there is an
assume statement on an array size, the array size can be pruned to another value. In which case, we
want to see "Set array size" in the trace, instead of "Array declaration".
Reviewed By: jvillard
Differential Revision: D20914930
fbshipit-source-id: 0253fb69e
Summary:
This diff lifts the `PulseAbductiveDomain.t` in `PulseExecutionState` by tracking whether the program continues the analysis normally or exits unusually (e.g. by calling `exit` or `throw`):
```
type exec_state =
| ContinueProgram of PulseAbductiveDomain.t (** represents the state at the program point *)
| ExitProgram of PulseAbductiveDomain.t
(** represents the state originating at exit/divergence. *)
```
Now, Pulse's actual domain is tracked by `PulseExecutionState` and as soon as we try to analyze an instruction at `ExitProgram`, we simply return its state.
The aim is to recover the state at the time of the exit, rather than simply ignoring them (i.e. returning empty disjuncts). This allows us to get rid of some FNs that we were not able to detect before. Moreover, it also allows the impurity analysis to be more precise since we will know how the state changed up to exit.
TODO:
- Impurity analysis needs to be improved to consider functions that simply exit as impure.
- The next goal is to handle error state similarly so that when pulse finds an error, we recover the state at the error location (and potentially continue to analyze?).
Disclaimer: currently, we handle throw statements like exit (as was the case before). However, this is not correct. Ideally, control flow from throw nodes follows catch nodes rather than exiting the program entirely.
Reviewed By: jvillard
Differential Revision: D20791747
fbshipit-source-id: df9e5445a
Summary:
It's easy to create large arrays in code, eg `int x[1UL << 16];`, but
these can generate huge nodes in SIL because zero-initialization is
translated by zero-ing structures element by element. Introduce a
builtin to use instead. Keep the naive method for small structures (with
a configurable limit on "small").
Reviewed By: dulmarod
Differential Revision: D20836836
fbshipit-source-id: 6bf5410f8
Summary:
- Add `no_return` models for Java's `exit(...)` methods (can be extended further later on)
- handle throw-catch better by short-cutting throw nodes to not exit node but to all **catch nodes** that are reachable by the node. If there is no catch node, we short-cut to the exit node as before.
This removes a FP from deadstore tests because before we simply were not able to handle CF from throw-> catch nodes at all.
Reviewed By: skcho
Differential Revision: D20769039
fbshipit-source-id: e978f6cdb
Summary: In an intra-procedural analysis we assume that parameters passed by reference to a function will be initialized inside that function. We use the type information of an actual parameter to initialize the fields of the struct. This does not work if a function has a parameter of type void* as the actual parameters also has type void*. To solve this issue, we use type information from local variables.
Reviewed By: jvillard
Differential Revision: D20670253
fbshipit-source-id: dc9f051ef
Summary:
- Model `System.exit()` as early_exit and add a test
- Tweak message of methods that are impure due to having no pulse summary (and add a test)
Reviewed By: skcho
Differential Revision: D20668979
fbshipit-source-id: 6b5589aae
Summary:
Hopefully no one uses this. This is in Python and we'd like to get rid
of it. Easy enough to either re-implement if needed or to be
re-implemented by a third party.
Reviewed By: ngorogiannis
Differential Revision: D20626344
fbshipit-source-id: 484022482
Summary:
As exemplified by added tests, pulse computes an empty summary (with 0 disjuncts) whenever it discovers a contradiction which might be caused by:
- discovering aliasing in memory
- widening limited number of times in loops and concluding that loop exit conditions are never taken
However, AFAIU, it is not possible to have a function with 0 disjunct apart from such anomalities. Even a function which does nothing like `void foo(){}` has 1 disjuncts:
```
Pulse: 1 pre/post(s)
#0: PRE:
{ roots={ };
mem ={ };
attrs={ };}
POST:
{ roots={ };
mem ={ };
attrs={ };}
SKIPPED_CALLS: { }
```
The aim of this diff is to consider functions with 0 disjuncts as **impure** because most often such cases are impure, rather than actually pure.
Reviewed By: skcho
Differential Revision: D20619504
fbshipit-source-id: 3a8502c90
Summary:
Previously, at each function call, we added a `WrittenTo` attribute for applying the address of the actuals. However, this results in mistakenly considering each function application that inspects its argument as impure. Instead, we should only propagate `WrittenTo` if the actuals have already `WrittenTo` attributes.
For instance, for the following functions
```
public static boolean is_null(Byte a) {
return a == null;
}
public static boolean call_is_null(Byte a) {
return is_null(a);
}
```
We used to get the following pulse summary for `call_is_null` (showing only one of the disjuncts):
```
#0: PRE:
{ roots={ &a=v1 };
mem ={ v1 -> { * -> v2 } };
attrs={ v1 -> { MustBeValid },
v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) } };}
POST:
{ roots={ &a=v1, &return=v8 };
mem ={ v1 -> { * -> v2 }, v8 -> { * -> v4 } };
attrs={ v2 -> { Arith =null,
BoItv ([max(0, v2), min(0, v2)]),
WrittenTo-----------WRONG },
v4 -> { Arith =1,
BoItv (1),
Invalid ConstantDereference(is the constant 1),
WrittenTo-----------WRONG },
v8 -> { WrittenTo } };}
SKIPPED_CALLS: { }
```
where we mistakenly recorded a `WrittenTo` for `v2` (what `a` points to). As a result, we considered `call_is_null` as impure :( This diff fixes that since the callee `is_null` doesn't have any `WrittenTo` attributes for its parameter `a`. So, we don't propagate `WrittenTo` and get the following summary
```
#0: PRE:
{ roots={ &a=v1 };
mem ={ v1 -> { * -> v2 } };
attrs={ v1 -> { MustBeValid },
v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) } };}
POST:
{ roots={ &a=v1, &return=v8 };
mem ={ v1 -> { * -> v2 }, v8 -> { * -> v4 } };
attrs={ v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) },
v4 -> { Arith =1,
BoItv (1),
Invalid ConstantDereference(is the constant 1) },
v8 -> { WrittenTo } };}
SKIPPED_CALLS: { }
```
Reviewed By: skcho
Differential Revision: D20490102
fbshipit-source-id: 253d8ef64
Summary: There has never been a sufficient formal basis for soundness nor completeness of reports on locals. This diff changes the domain to effectively concern only expressions rooted at formals or globals.
Reviewed By: ezgicicek
Differential Revision: D19769201
fbshipit-source-id: 36ae04d8c
Summary:
Impurity domain was tracking all changes to variables (with a list of traces that containing all write/invalid accesses). This results in having long traces with multiple access events for the same variable. For instance,
```
void swap_impure(int[] array, int i, int j) {
int tmp = array[i];
array[i] = array[j]; \\ included in the trace
array[j] = tmp; \\ included in the trace
}
```
here we recorded both array accesses.
This diff changes the domain to include accesses so that we only keep track of a single trace per access. Array accesses are only recorded once.
Note that we want to record all unique accesses, not just the first one, because impurity will be used for hoisting/cost where we will invalidate impure arguments and consider all the rest as not changing.
Reviewed By: jvillard
Differential Revision: D20385745
fbshipit-source-id: d3647dad3
Summary:
D20362149 missed
- to pass the optional argument `include_value_history` to the recursive call in `PulseTrace.add_to_errlog`.
- to set `include_value_history=false` for skipped calls.
This diff fixes these issues.
Reviewed By: skcho
Differential Revision: D20385604
fbshipit-source-id: 176e4d010
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary: Impurity traces are quite big due to recording values histories. Let's simplify the traces by removing pulse's value histories.
Reviewed By: skcho
Differential Revision: D20362149
fbshipit-source-id: 8a2a6115e
Summary:
These were not used (and were actually activated byt the same config
param). They both are in experimental stage that never reached maturity.
Since the team does not have immediate plans to work on ObjC nullability
checker; and since "eradicate" (now known as nullsafe) is the main
solution for Java, removing it is sensible.
Reviewed By: jvillard
Differential Revision: D20279866
fbshipit-source-id: 79e64992b
Summary: This diff suppresses integer overflow issues in functions that includes "hash" in its name.
Reviewed By: jvillard
Differential Revision: D19942654
fbshipit-source-id: d86fa4f00
Summary:
When finding a proper constructor for `std::make_shared`, the given parameter types are sometimes
slightly different, e.g., const int vs int. This diff loosens the condition of the types on finding
constructors.
Reviewed By: ngorogiannis
Differential Revision: D19743198
fbshipit-source-id: f90213109
Summary:
This diff fixes the clang translation for switch statement. It assumed that `default:` comes always
at last, which introduced some unreachable nodes inadvertently, e.g. when `default:` comes at first.
Reviewed By: dulmarod
Differential Revision: D19793138
fbshipit-source-id: 1e8b52c0d
Summary:
The goals are:
- Increase precision in C-languages by ditching access paths.
- Help with eventually sharing the abstract address module with RacerD.
- Reports are now language-mode specific (eg `->` in clang vs `.` in Java).
It's not exactly access expressions used here. Instead the pattern `(base, access list)` is used where `access` is `HilExp.Access.t`. This is done to ease the way `deriving` is used for creating two comparison functions, one that cares about the root variable and one that doesn't; and also because the main function that recurses over accesses (`normalise_access_list`) visits the accesses from innermost to outermost.
Also, kill some dead code.
Reviewed By: skcho
Differential Revision: D19741545
fbshipit-source-id: 013bf1a89
Summary:
This diff adds a taint domain in Inferbo. The taint value will be used to find vulnerable array
accesses in the following diffs.
Reviewed By: ezgicicek
Differential Revision: D19391028
fbshipit-source-id: 566b4c0fe
Summary:
To emulate the `ThreadSafe` contract in C++/ObjC, reporting was gated behind a check that ensured a C++/ObjC class has a `std::mutex` member (plus other filters). This is reasonable, but it has some drawbacks
- other locks may be used, and therefore must be added to the member check;
- locking mechanisms that use the object itself as a monitor cannot be modelled (`synchronized` in ObjC)
RacerD already has `ThreadsDomain` which models our guess on whether a method is expected to run in a concurrent context, and which in C++/ObjC boils down to whether the method non-transitively acquires a lock. This should be a good enough indicator that the class should be checked regardless of whether the locks are member fields. This diff gates the C++/ObjC check on that abstract property.
Reviewed By: dulmarod
Differential Revision: D19558355
fbshipit-source-id: 229d7ff82
Summary: This diff fixes the array access checking function for nested global arrays. We had assumed that RHS of `store` statement in SIL does not include array access expression, but that is not true: for global arrays, SIL can have statements like `*LHS = GlobalArray[n][m]`.
Reviewed By: ezgicicek
Differential Revision: D19300153
fbshipit-source-id: 256325642
Summary:
This diff gives semantics of `std::make_shared` as simple constructor, i.e., it changes function
call of `std::make_chared<C>(i)` to the constructor `C(i)`.
Reviewed By: ngorogiannis
Differential Revision: D19432338
fbshipit-source-id: 0d838e555
Summary:
This diff gets global constant array values from their initializers. The `find_global_array` function is
added to memory domain, which finds values of global array locations during the ondemand value
generation.
Reviewed By: ngorogiannis
Differential Revision: D19300143
fbshipit-source-id: 7b0b84c42
Summary:
If a race exists in two or more overloads of the same method and we use only the class and method name in the report text, then the current bug hashing algorithm will identify the two reports as duplicates.
To avoid this, the report had the class, method and list of type parameters. This is unreadable, however, and redundant (the report is already located within the method in question). So at the risk of duplicates, use only class+method names.
Also, fix a bug in `Procname.pp_simplified ~withclass` where `withclass` was ignored for C++/ObjC methods.
Now:
> Read/Write race. Non-private method `FrescoVitoImageSpec.onCreateInitialState(...)` indirectly reads with synchronization from `factory.AnimatedFactoryProvider.sImpl`. Potentially races with unsynchronized write in method `FrescoVitoImageSpec.onEnteredWorkingRange(...)`.@ [Litho components are required to be thread safe because of multi-threaded layout](https://fburl.com/background-layout). Reporting because current class is annotated `MountSpec`, so we assume that this method can run in parallel with other non-private methods in the class (including itself).
Before
> Read/Write race. Non-private method `void FrescoVitoImageSpec.onCreateInitialState(ComponentContext,StateValue,StateValue,Uri,MultiUri,ImageOptions,FrescoContext,Object,ImageListener)` indirectly reads with synchronization from `factory.AnimatedFactoryProvider.sImpl`. Potentially races with unsynchronized write in method `FrescoVitoImageSpec.onEnteredWorkingRange(...)`.@ [Litho components are required to be thread safe because of multi-threaded layout](https://fburl.com/background-layout). Reporting because current class is annotated `MountSpec`, so we assume that this method can run in parallel with other non-private methods in the class (including itself).
Reviewed By: artempyanykh
Differential Revision: D19462277
fbshipit-source-id: aebc20d89
Jules Villard
Daiva Naudziuniene
Sungkeun Cho
Martin Trojer
Qianyi Shu
Dulma Churchill
Nikos Gorogiannis
Ezgi Çiçek
Mitya Lyubarskiy