Summary:
This option is only useful if you want to treat casts angelically, but nothing else.
Since angelic is on by default and this option is off by default, it's basically useless.
Reviewed By: jeremydubreil
Differential Revision: D4334030
fbshipit-source-id: 3c0b0ed
Summary:
Most of the diff adds a way to run an existing test with different infer
options.
Also, do not run the Python script when capturing "analyze".
fixes https://github.com/facebook/infer/issues/518
Reviewed By: jberdine
Differential Revision: D4333762
fbshipit-source-id: 642acff
Summary:
Change the domain of SIOF to be based on sets of pvar * location instead of
single pvars. This allows us to group several accesses together. However, we
still get different trace elems for different instructions in a proc. We do two
things to get around this limitation and get a trace where all accesses within
the same proc are grouped together, instead of one trace for each access:
1. A post-processing phase at the end of the analysis of one proc collects all
the globals directly accessed in the proc into a single trace elem.
2. When creating the error trace, unpack this set into several trace elements
to see each access (at its correct location) separately in the trace.
This is a bit hacky and another way would be to extend the API of traces to
handle in-procedure accesses natively instead of shoe-horning them. However
since SIOF is the only one to use this, it introduces less boilerplate to do it
that way for now.
Also, a few .mlis for good measure.
Reviewed By: sblackshear
Differential Revision: D4299070
fbshipit-source-id: 3bbb5c2
Summary: This makes it a bit easier to read the results of `make test`.
Reviewed By: jberdine
Differential Revision: D4326467
fbshipit-source-id: dd69114
Summary: These direct tests were still mostly relying on PHONY targets.
Reviewed By: jberdine
Differential Revision: D4326469
fbshipit-source-id: 37b2d0a
Summary:
Turns out that swapping stdout and stderr using a temporary fd 3 was screwing
up with make's jobserver, who also uses fd 3!
Also, infer is partly to blame as it also calls `make`. Unsetting `MAKEFLAGS`
in infer tells `make` that the way infer calls `make` is independent from
parent `make` invocations.
Also, simplify the rules for direct tests and build system tests.
Reviewed By: jberdine
Differential Revision: D4328979
fbshipit-source-id: 96818e8
Summary:
The list of argument specs is a global ref inside `CommandLineOptions`, which
need to be reset to the empty list every time `parse` is called. Otherwise, we
get duplicated sections:
```
$ infer --help
Infer version v0.9.4-84d61cb
Copyright 2009 - present Facebook. All Rights Reserved.
Toplevel options
--inferconfig-home <dir> Path to the .inferconfig file
--project-root | -pr <dir> Specify the root directory of the project (default: /home/jul/infer)
Analysis (backend) options
Clang frontend options
Java frontend options
Toplevel options
[... the rest of the options -- without --inferconfig-home or --project-root,
with all the section headers again ...]
```
Reviewed By: jberdine
Differential Revision: D4333448
fbshipit-source-id: f91ea66
Summary:
The javac -classes_out option is used to set the results directory for
the buck build system integration.
Reviewed By: jeremydubreil
Differential Revision: D4162907
fbshipit-source-id: 75d0a6d
Summary:
We don't need to have separate `--` integration for compilation database. Instead use:
infer --compilation-db-files db.json <other_infer_options> // no -- anywhere!
Reviewed By: jberdine
Differential Revision: D4327570
fbshipit-source-id: caf0dc9
Summary:
This change is to support the development of CTL's DSL, where issues can be specified directly from the language, in the form of strings.
Severity is specified locally to the place where the check is defined
Reviewed By: ddino
Differential Revision: D4326594
fbshipit-source-id: 7b146ac
Summary:
If these collections don't encapsulate their state properly, there are bigger problems than thread safety issues :).
Plus, these warnings are less-than-actionable for non-Guava maintainers.
Reviewed By: peterogithub
Differential Revision: D4324277
fbshipit-source-id: cacfbf0
Summary:
Maintain an "ownership" set of access paths that hold locally allocated memory that has not escaped.
This memory is owned by the current procedure, so modifying it outside of synchronization is safe.
If an owned access path does escape to another procedure, we remove it from the ownership set.
Reviewed By: peterogithub
Differential Revision: D4320034
fbshipit-source-id: 64f9169
Summary: Turns out I forgot to close the fd returned by dup(2) so we were leaking a lot.
Reviewed By: jeremydubreil
Differential Revision: D4327389
fbshipit-source-id: 74574ac
Summary: This is required to maintain a set of owned access paths in a subsequent diff.
Reviewed By: jberdine
Differential Revision: D4318859
fbshipit-source-id: bd1a9fa
Summary: The command `make -k run-test` does not stop in case of failure but still exits with an error code, preventing the actual the .exp file to be replaced by the new analysis results.
Reviewed By: jvillard
Differential Revision: D4326028
fbshipit-source-id: 3354458
Summary:
This diff introduces place-holders strings in error messages and evaluates them
when an error needs to be reported.
Place-holders strings are of the form %name_of_helper_function%. They will be evaluated
using and helper function that gives a value.
For example if we need to display the name of a variable in the error message we will have:
".... %var_name%...."
then %var_name% will be evaluated in the ast node calling the appropriate
helper function and the results will replace %var_name% in the message.
Reviewed By: dulmarod
Differential Revision: D4313133
fbshipit-source-id: bf521ca
Summary:
We've had some issues with names like `arr$` appearing in error reports.
Any identifier name that contains $ cannot have come from source code because it is not a legal Java identifier.
This change should stop these reports because Errdesc.ml refuses to use temporary var names in error reports.
Reviewed By: jeremydubreil
Differential Revision: D4322305
fbshipit-source-id: 16237fe
Summary:
These checks were useful when developing Quandary, but do not fire anymore.
`AccessPath.raw_equal` is implicated as one of the top time-consuming functions in Quandary, so gating the assertion that calls it needlessly might save us some time.
Also minor cleanup: made the error messages a bit clearer and added an mli.
Reviewed By: jeremydubreil
Differential Revision: D4323653
fbshipit-source-id: 2a723b5
Summary:
The debug script wants to run InferClang on the file at hand, but that often
involves running a -cc1 command with InferClang, which is no longer supported.
This removes this functionality. The debug script now only dumps the AST to
biniou and its text representation.
Reviewed By: dulmarod
Differential Revision: D4319431
fbshipit-source-id: ef64912
Summary:
C stubs were causing issues with building:
- need OCaml stubs of the C stubs for byte compilation!
- brittle (to remain polite) support in ocamlbuild
Ctypes is awesome, use it instead.
Slight wrinkle on the previous statement:
- ioctl(2) is variable arguments, which is not officially supported by Ctypes but should work in our use-case
- I'm hardcoding the value of a C macro found in system headers
Reviewed By: jberdine
Differential Revision: D4319507
fbshipit-source-id: 352804a
Summary:
<ugly shameful hack>
Temporarily redirect stderr to /dev/null before calling `Javalib.get_class` so
as to avoid getting spammed with "Warning: unexpected attribute: Code" messages
when parsing Java files.
</ugly shameful hack>
I suspect that now that Javalib handles Java 8 this issue is more prevalent. An
issue/PR should be sent to Javalib too so that it's fixed upstream and we can
eventually remove the hack (t15039096).
Reviewed By: jberdine
Differential Revision: D4319466
fbshipit-source-id: af855ba
Summary:
This removes support for developing infer using Eclipse. If you use Eclipse,
consider using Atom/Emacs/vim instead, which have good OCaml/Reason support.
This allows us to get rid of a couple quirks:
- do not generated ocaml annots (this is very slow)
- move OCaml _build directory to infer/src/ where it makes more sense
Reviewed By: jberdine
Differential Revision: D4319480
fbshipit-source-id: 6f063fc
Cristiano Calcagno
Sam Blackshear
Andrzej Kotulski
Jules Villard
Josh Berdine
Martino Luca
Yunxing Dai
Jeremy Dubreil
Dino Distefano