Summary:
After D5245416 I was taking a closer look and decided it's best to get rid of the `Interprocedural` module altogether.
Since jeremydubreil's refactoring to pass the summaries around everywhere, this module doesn't do much (it used to make sure the summary actually got stored to disk).
Client code is shorter and simpler without this module.
Reviewed By: mbouaziz
Differential Revision: D5255400
fbshipit-source-id: acd1c00
Summary: The docs for this said that it stores the summary to disk, which is no longer true. `compute_summary` is more descriptive of what it actually does now.
Reviewed By: jberdine
Differential Revision: D5245416
fbshipit-source-id: f5138cd
Summary:
Now that we can run several inter-procedural analyses at the same time, we should no longer use the function `Reporting.log_error_deprecated` as it logs the errors in the specs table. This specs table is normally used for caching and will be deprecated in favor of having a cache summaries for the callees in the `Ondemand` module (to avoid deserialising a callee more than once within the same process).
This revision just renames the reporting functions.
Reviewed By: sblackshear
Differential Revision: D5205009
fbshipit-source-id: b066549
Summary: The purpose of the annotation reachability analysis is to report when a method annotated with `X` never calls, directly or indirectly, another method annotated with `Y`. However, there can be different call stacks following different execution paths from `X` to `Y`. Reporting more than one call stack ending with the same annotated procedure does not bring more signal to the end user. So the purpose of this diff is to avoid those duplicated reports and report at most one annotation reachability issue per end of call stack.
Reviewed By: sblackshear
Differential Revision: D4942765
fbshipit-source-id: 46325a7
Summary: The analysis logic was split between the treatment of the instructions and the definition of the domain, making the code more complicated that it should. This diff moves more of the logic into the domain definition and change to variable names to more descriptive ones
Reviewed By: sblackshear
Differential Revision: D4936414
fbshipit-source-id: ff59de7
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary: This was annoying as "jump to next error" was otherwise always jumping to this warning about shadowing `|>`
Reviewed By: sblackshear
Differential Revision: D4767571
fbshipit-source-id: 932145c
Summary: It seems that we were not really using the `Bottom` part of the domain as a pair of (empty call map, empty tracking var map) was already acting as bottom.
Reviewed By: sblackshear
Differential Revision: D4759757
fbshipit-source-id: 53dedfe
Summary: Run all the checkers one after each other, which allows the Infer AI framework to run several checkers together, including the possibility for them to collaborate.
Reviewed By: sblackshear
Differential Revision: D4621838
fbshipit-source-id: e264d67
Summary:
Changes every checker to take a summary as parameter and return the updated summary to the next checker. Since several operations, like `Reporting.log_*` are modifying the summary in memory by loading them from the in-memory cache of summaries, we currently need to rely on `Specs.get_summary_unsafe` to return the updated version of the summary.
This diff allows to change the API of `Reporting` to take a summary as input and progressively remove all the calls `Specs.get_summary_unsafe` independently from adding the possibility to run several checkers at the same time. The final objective to have every checker just passing around the summary of the procedure being analyzed, and having the in-memory cache only use to store the summaries of the callees.
Reviewed By: sblackshear
Differential Revision: D4649252
fbshipit-source-id: 98f7ca7
Summary:
At one point I thought we'd want to have lots of different schedulers for things like exploring loops in different orders, but that hasn't materialized.
Let's make the common use-case simpler by hiding the `Scheduler` parameter inside the `AbstractInterpreter` module.
We can always expose `MakeWithScheduler` later if we want to.
Reviewed By: jberdine
Differential Revision: D4508095
fbshipit-source-id: 726e051
Summary:
The thread-safety and annotation reachibility analyses were defining ugly custom versions of override_exists with refs.
Let's give them a canonical, ref-free version instead.
Reviewed By: jberdine
Differential Revision: D4475777
fbshipit-source-id: 0bb45fc
Summary:
One of the things that confuses me about the current annotations API is that there's a lot of ways to do the same thing.
Some of the concepts like `annotated_signature` are only really needed by Eradicate.
This diff removes usages of `annotated_signature` outside of Eradicate (everyone else was just using `get_annotated_signature` as a roundabout way to get the return annotation of a procedure).
In the future, I'll move `get_annotated_signature` and other Eradicate-specific functionality into its own module inside the Eradicate directory.
Reviewed By: jberdine
Differential Revision: D4472058
fbshipit-source-id: 5bb0846
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Summary:
A domain should not definite its initial state, since distinct users of the domain may want to choose different initial values.
For example, one user might want to bind all of the formals to some special values, and one user might want the initial domain to be an empty map
This diff makes this distinction clear in the types by (a) requiring the initial state to be passed to the abstract interpreter and (b) lifting the requirement that abstract domains define `initial`.
Reviewed By: jberdine
Differential Revision: D4359629
fbshipit-source-id: cbcee28
Summary:
Before, the Interprocedural functor was a bit inflexible. You couldn't do custom postprocessing like normalizing the post state or coverting the post from an astate type to a summary type.
Now, you can do whatever you want by passing a custom `~compute_post` function.
Since `AbstractInterpreter.compute_post` can be used by clients who don't care to do anything custom, this doesn't create too much boilerplate.
Reviewed By: jvillard
Differential Revision: D4309877
fbshipit-source-id: 8d1d85d
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary: Noticed this when I was writing the documentation for the abstract interpretation framework and was curious about why `Ondemand.analyze_proc` needs the type environment. It turns out that the type environment is only used to transform/normalize Infer bi-abduction specs before storing them to disk, but this can be done elsewhere. Doing this normalization elsewhere simplifies the on-demand API, which is a win for all of its clients.
Reviewed By: cristianoc
Differential Revision: D4241279
fbshipit-source-id: 957b243
Summary:
It was defined in two places and I'm about to add a third, so let's share
instead.
Reviewed By: sblackshear
Differential Revision: D4153420
fbshipit-source-id: 3d2c519
Summary:
Analyses should handle methods whose code is unknown and methods whose summary is a no-op differently.
Previously, this was done correctly for some kinds of methods (e.g., native methods, which were recognized as unknown), but not for others (interface and abstract methods).
This diff makes sure we correctly treat all three kinds as unknown.
Reviewed By: jeremydubreil
Differential Revision: D4142697
fbshipit-source-id: c88cff3
Summary:
this makes frontends no longer depend on SymExec.ml. `ModelBuiltins` was split into two modules:
- `BuiltinDecl` with procnames for builtins (used to determine whether some function is a builtin)
- `BuiltinDefn` with implementations used by `SymExec`
- they both have similar type defined in `BUILTINS.S` which makes sure that new builtin gets added into both modules.
During the refactor I ran some scripts:
`BuiltinDecl.ml`:
let X = create_procname "X"
cat BuiltinDecl.ml | grep "create_procname" | tail -70 | awk ' { print $1,$2,$3,$4,"\42"$2"\42"} '
then manually confirm string match. Exceptions:
"__exit" -> "_exit"
"objc_cpp_throw" -> "__infer_objc_cpp_throw"
__objc_dictionary_literal
nsArray_arrayWithObjects
nsArray_arrayWithObjectsCount
`BuiltinDefn.ml`:
let X = Builtin.register BuiltinDecl.X execute_X
cat BuiltinDecl.ml | grep "create_procname" | tail -70 | awk ' { print $1,$2,$3,"Builtin.register BuiltinDecl."$2,"execute_"$2} '
then, fix all compilation problems
Reviewed By: jberdine
Differential Revision: D3951035
fbshipit-source-id: f059602
Summary:
Change Sil.Call instruction to have only a single optional return
identifier, insted of a list. Essentially none of the code handled
multiple return identifiers. Also, add the type of the return
identitifier to Call instructions.
Reviewed By: sblackshear
Differential Revision: D3919358
fbshipit-source-id: d2d4f72
Summary:
Refactor Sil.struct_typ and associated operations into a separate
StructTyp module. This is possible now that Typ.Tstruct only carries a
type name instead of the definition directly, and is helpful to simplify
module dependencies.
Reviewed By: cristianoc
Differential Revision: D3919357
fbshipit-source-id: a37a656
Summary:
It is no longer necessary to keep the name of a struct within the
struct, as the name will just have been used to look it up.
Reviewed By: cristianoc
Differential Revision: D3919355
fbshipit-source-id: ab65168
Summary:
This diff removes the redundancy in the representation of types where
struct types could be represented either directly using Tstruct or
indirectly using Tvar to refer to the type environment. A consequence
is that it is much harder to construct large type values.
Reviewed By: sblackshear, cristianoc
Differential Revision: D3839753
fbshipit-source-id: cf04ea5
Sam Blackshear
Jeremy Dubreil
Jia Chen
Martino Luca
Andrzej Kotulski
Cristiano Calcagno
Josh Berdine
Jules Villard
Peter O'Hearn