Summary:
It removes the `represents_multiple_values` parameters when we can know them from `path` values.
Depends on D12939124
Reviewed By: skcho
Differential Revision: D12939130
fbshipit-source-id: 30ff768b2
Summary:
It modifies sizes and offsets of array values on pointer castings.
Currently, it supports only simple castings of pointer-to-integers.
Reviewed By: mbouaziz
Differential Revision: D12920589
fbshipit-source-id: a5ba831b8
Summary: It uses big int, instead of 63bits int of OCaml, in the interval domain in order to get preciser numeric values in the future.
Reviewed By: jvillard
Differential Revision: D10123364
fbshipit-source-id: c217f4366
Summary:
It detaches the Summary module from BufferOverrunDomain.
Depends on D9194130
Reviewed By: jvillard
Differential Revision: D9194375
fbshipit-source-id: 30392b5ce
Summary: It simplifies instantiataion of `ret_alias`. While it got `ret_alias` values by iterating caller's and callee's memory, now it gets `ret_alias` by evaluating symbol paths included in location values.
Reviewed By: mbouaziz
Differential Revision: D9569606
fbshipit-source-id: a3326bb81
Summary:
It simplifies abstract memory instantiations of function calls. Now it instantiates callee memories by directly evaluating symbol paths, rather than constructing `subst_map`.
main changes are:
- no construction of `subst_map` and `trace_map`
- no symbol table in Inferbo's summary
- no `Symbol_not_found` exception (for when a required symbol was unavailable in `subst_map`)
Reviewed By: mbouaziz
Differential Revision: D9495597
fbshipit-source-id: 18cdcd6f7
Summary:
- Was not used by the caller
- Gives smaller summaries
- Will allow adding a intra-proc info, e.g. `node` for reporting (not sure yet)
Reviewed By: skcho
Differential Revision: D9373763
fbshipit-source-id: 322001b53
Summary:
In SIL, (1) some program variables (e.g., array parameter) are used as pointers to heap addresses and (2) the other program variables (e.g., local array) are used as addresses themselves. So, the values of (1) are retrieved by the `Load` command, while that of (2) are by `Exp.Lvar` expressions directly.
To address them differently, we had managed two maps (`Mem.Stack` and `Mem.Heap`), but which introduced function duplications on abstract memory and increased complexity. This diff merges the two maps, and instead a location set is used for distinguishing two types of abstract locations during analysis.
Reviewed By: mbouaziz
Differential Revision: D9420388
fbshipit-source-id: 13f824850
Summary:
It returns unknown values on non-const function calls like on unknown
function calls.
Reviewed By: mbouaziz
Differential Revision: D9478862
fbshipit-source-id: 4b795ec55
Summary: It moves the functions that constructs array values from BufferOverrunSemantics to ArrayBlk and Val modules.
Reviewed By: mbouaziz
Differential Revision: D9194130
fbshipit-source-id: bf040a01a
Summary: It uses a SymbolPath map to Symbol in Inferbo's summary instead of an entry memory of callee, which is used for instantiations of the abstract memories on function calls.
Reviewed By: mbouaziz
Differential Revision: D9081631
fbshipit-source-id: 478cda0de
Summary:
It adds relational domains to Inferbo: octagon of Apron and polyhedra of Elina.
- Each Mem domain value includes one relational value containing relations among symbols. The relational values are modified by the `Prune` and `Store` commands.
- Each abstract value includes three symbols, which represent integer value, array offset, and array size of an abstract value.
The relational domain is deactivated by default. Use the `--bo-relational-domain {oct, poly}` option for the activation, though Inferbo with the relational domains does not work at this point because some modifications of Apron and Elina we made has not been applied to their opam repositories yet.
Reviewed By: jvillard
Differential Revision: D8874102
fbshipit-source-id: 08e5883cb
Summary:
It adds relational domains to Inferbo: octagon of Apron and polyhedra of Elina.
- Each `Mem` domain value includes one relational value containing relations among *symbols*. The relational values are modified by the `Prune` and `Store` commands.
- Each abstract value includes three *symbols*, which represent integer value, array offset, and array size of an abstract value.
The relational domain is deactivated by default, so this diff should not make any differences in CI.
Use `--bo-relational-domain {oct, poly}` for the activation, though Inferbo with the relational domains does not work at this point because some modifications of Apron and Elina we made has not been applied to their opam repositories yet.
Reviewed By: mbouaziz, jvillard
Differential Revision: D8478542
fbshipit-source-id: 510ff53
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
Before we were computing the size of an abstract state (`range`) using the `NonNegativeBound` domain but it wasn't able to express product of symbolic values.
This diff introduces a domain for that.
The range of an interval is still computed in `NonNegativeBound` but then the product is done in `TopLiftedPolynomial` so all costs end up being of that type.
The //symbols// of a polynomial are `NonNegativeBound` (so the polynomial only represent non-negative values, perfect for a cost), which handles substitution correctly, i.e. it gives zero instead of negative values.
Reviewed By: ddino
Differential Revision: D7397229
fbshipit-source-id: 6868bb7
Summary:
This is an attempt to make things more consistent, and maybe save some work
from the `Format` module in case flambda doesn't have our backs.
Reviewed By: jberdine
Differential Revision: D7775496
fbshipit-source-id: 59a6314
Summary:
The Cost analysis uses `Bound` for non-negative values only, let's make it a separate module (and abstract type).
This also separates the abstract domain part of `Bound` which we wanted anyway.
Depends on D7844267
Depends on D7843351
Depends on D7782184
Reviewed By: ddino
Differential Revision: D7844572
fbshipit-source-id: 0e6b620
Summary:
Add warning 60 (unused module) to the list of fatal warnings. Whitelisting
modules at toplevel is tricky (see inline comments) but doable.
Reviewed By: mbouaziz
Differential Revision: D7790073
fbshipit-source-id: 6f591c4
Summary:
Upgrade ocamlformat, and base which needs to be done in sync in order to build
ocamlformat, and the other deps can come for the ride.
Reviewed By: jvillard
Differential Revision: D7663537
fbshipit-source-id: 3e90970
Summary:
Got rid of `Itv.equal` which was ambiguous and use an abstract boolean type for abstract comparison results
Depends on D7568573
Reviewed By: jvillard
Differential Revision: D7568583
fbshipit-source-id: 0e897e9
Summary:
Convenience function for `prune_eq` with zero (needed for stacked diffs).
Renamed `prune_zero` to `prune_ne_zero` to avoid ambiguity.
Reviewed By: jvillard
Differential Revision: D7568556
fbshipit-source-id: b95ab6d
Summary: In the pointer arithmetics, it returns top, if we cannot precisely follow the physical memory model, e.g., (&x + 1).
Reviewed By: mbouaziz
Differential Revision: D7453510
fbshipit-source-id: db8738e
Summary:
At function calls, it copies a subset of heap memory that is newly
allocated by callees and is reachable from the return value.
Reviewed By: mbouaziz
Differential Revision: D7081425
fbshipit-source-id: 1ce777a
Summary:
It prunes abstract memories on `assert` commands.
Problem: Since the assert command is sometimes translated to two
sequential `if` statments, it was not able to prune the memory
precisely at `assert` commands in Inferbo---the pruned memory at the
first branch was joined before the second branch.
Solution: To avoid losing the pruning information at the first branch,
now, it records which locations are pruned at the first branch and
applies the same pruning at the next branch if they have
semantically the same condition.
Reviewed By: mbouaziz
Differential Revision: D6895919
fbshipit-source-id: 15ac1cb
Summary:
Found the dead code with the script in the next commit, iteratively until no
warnings remained.
Methodology:
1. I kept pretty-printers for values, which can be useful to use from infer's REPL (or
when printf-debugging infer in general)
2. I kept functions that formed some consistent API (but not often, so YMMV), for instance if it looked like `Set.S`, or if it provides utility functions for stuff in development (mostly the procname dispatcher functions)
3. I tried not to lose comments associated with values no longer exported: if the value is commented in the .mli and not the .ml, I moved the comment
4. Some comments needed updating (not claiming I caught all of those)
5. Sometimes I rewrote the comments a bit when I noticed mis-attached comments
Reviewed By: mbouaziz
Differential Revision: D6723482
fbshipit-source-id: eabaafd
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary:
Model for `folly::split` that handles the representation in the cpp model.
Depends on D6544992
Reviewed By: jvillard
Differential Revision: D6545006
fbshipit-source-id: 2b7a139
Summary: There is a lot of code to create LaTeX output of the Infer datastructures, but this does not seem to be used anymore.
Reviewed By: jvillard
Differential Revision: D6355686
fbshipit-source-id: 55de8e9
Summary:
...so I just removed it
+ renamed `loc` of type `Location.t` to `location` to differentiate from `Loc.t` values
Reviewed By: jvillard
Differential Revision: D6358413
fbshipit-source-id: 2d3eba9
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
vector::data returns a pointer to the first value of the vector.
- The size of the (array) pointer should be the same with the vector.
- The pointer should point to the same abstract value with the vector.
Reviewed By: mbouaziz
Differential Revision: D6196592
fbshipit-source-id: cc17096
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
A specific type of alias is added for the vector::empty() result and it is used at pruning.
Now, there are two types of aliases:
- "simple" alias: x=y
- "empty" alias: x=v.empty() and y=v.size
So, if x!=0, y is pruned by (y=0). Otherwise, i.e., x==0, y is pruned by (y>=1).
Reviewed By: mbouaziz
Differential Revision: D6004968
fbshipit-source-id: bb8d50d
Summary:
Move Inferbo safety conditions to their own file.
Split the old `Condition.t` to a condition together with a trace.
This will ease having: different kind of condition and several traces for the same condition (see following diff)
Reviewed By: jvillard
Differential Revision: D5942030
fbshipit-source-id: d74a612
Summary:
Bottom bounds do not make sense (what is the meaning of `[_|_; 1]`?), let's get rid of them.
`Bot` was useful for substitution though, with a special meaning, use `bottom_lifted` for that case.
Reviewed By: skcho
Differential Revision: D5941796
fbshipit-source-id: 5778255
Summary: A bottom interval in a safety condition doesn't make sense. Let's not allow it at all.
Reviewed By: skcho
Differential Revision: D5941552
fbshipit-source-id: 6bd2a65
Summary: Use `pp` functions until it needs to be turned into a string.
Reviewed By: jvillard
Differential Revision: D5941473
fbshipit-source-id: 87ca9df
Summary:
Problem: The analyzer did not know that the value of `v.size()` is an alias of `v.infer_size`, so `v.infer_size` is not pruned by the if condition. As a result it raises a false alarm.
void safe_access(std::vector<int> v) {
if (v.size() >= 10) {
v[9] = 1; // error: BUFFER_OVERRUN Offset: [9, 9] Size: [5, 5]
}
}
void call_safe_access_Good() {
std::vector<int> v(5, 0);
safe_access(v);
}
Solution: Adding alias for return value to the abstract domain.
Now Inferbo can prune `v.infer_size` because it knows that the value of `v.size()` is an alias of `v.infer_size`. There is already an alias domain in Inferbo, so we added a specific room for the retrun value.
Reviewed By: jvillard, mbouaziz
Differential Revision: D5396988
fbshipit-source-id: 4a4702c
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
:
Get rid of model location in reports.
The goal is to avoid changing `issues.exp` whenever a model is updated.
Reviewed By: jvillard
Differential Revision: D5356608
fbshipit-source-id: 88ecaba
Summary: Unknown library returns the unknown pointer as well as the top interval.
Reviewed By: mbouaziz, jvillard
Differential Revision: D5282669
fbshipit-source-id: 34c7e18
Summary:
Change the API of `Logging` wrt to writing to files and to the console (see
changes in logging.mli).
Write only to one log file: infer-out/log. Prefix each line with the kind of
warning and the PID of the process emitting it. Writing with `O_APPEND` is
atomic so the file should not get garbled by concurrent writes. To get the
output of a single process, find out which one interests you by looking at
infer-out/log, then `grep ^[<PID>] infer-out/log`.
Introduce 3 log levels for debug output and command-line options to set them
for various categories individually.
Change tons of `"\n"` to `"@\n"` so the `Format` module is aware of newlines
without us having to look through every character of every logged string for
`\n` characters.
Reviewed By: mbouaziz
Differential Revision: D5165317
fbshipit-source-id: 93c922f
Summary:
This diff fixes unintentional bottoms in pointer arithmetic of inferbo.
The pointer arithmetic on addresses of variables (not array) just returns
the operand.
Reviewed By: jvillard
Differential Revision: D5060424
fbshipit-source-id: 495d8b8
Summary:
Try and enforce the following rules:
- stderr is for updating the user about progress or errors
- Introduce Logging.progress that outputs to stderr, but honours --quiet
- Logging.stderr is as before
- Logging.out now prints to stderr (or to log files as before if set up) and
not stdout. If some information should go on stdout then the user should be
able to rely on it (ie, it's not just some progress message). For now only
the summary of the errors is printed on stdout by default.
- Logging.err* functions are gone. If the error is user-visible, it should be
Logging.stderr, or `failwith`. If not, go to the same log file as other
output, which personally I find much more convenient than having to dig through
2 log files every time I'm looking for some output.
Reviewed By: jberdine
Differential Revision: D5095720
fbshipit-source-id: 68999c9
Summary:
This commit fixes a problem that the buffer overrun checker incorrectly
stops when a global variable (bottom) is involved in control flow.
In the new version, abstract memories return Top for unanalyzed abstract
variables.
Reviewed By: mbouaziz
Differential Revision: D5016447
fbshipit-source-id: 5132448
Summary:
`[a, b] < [a, _]` and `[_, a] < [b, a]` are most probably false (it comes from size < size)
Mark definitely unsatisfied conditions as B1, others as B2+
Reviewed By: KihongHeo, jvillard
Differential Revision: D4962107
fbshipit-source-id: ba8f469
Summary:
For now we just want to find bugs, let's do something smarter later (smash heap variables only when needed).
Depends on D4962107
Reviewed By: jvillard
Differential Revision: D4962121
fbshipit-source-id: 1b777a6
Summary:
- Use Logging for logging
- Add a few extra debug (not ON by default)
- No space before colon
Depends on D4961957
Reviewed By: KihongHeo
Differential Revision: D4961989
fbshipit-source-id: 7c8697d
Summary:
- Bottom-lift abstract memory domain to express unreachable node
- Two cases to make a node unreachable
+ constant: when an evaluation result of condition expression is
bottom or false, e.g., "prune(0)".
+ alias: when the same structure e is compared to itself with "<",
">", and "!=", e.g., "prune(e < e)".
- Add test for the new prune (prune_constant.c, prune_alias.c)
- Debug the semantics of comparison
Reviewed By: mbouaziz
Differential Revision: D4938055
fbshipit-source-id: d0fadf0
Sungkeun Cho
Mehdi Bouaziz
Josh Berdine
Ezgi Çiçek
Jules Villard
Jeremy Dubreil
Kihong Heo
Sam Blackshear