Summary:
Simplify DB initialization by removing some unit functions, since
Config values are now already initialized at module load time.
Reviewed By: akotulski
Differential Revision: D3522728
fbshipit-source-id: ac93d30
Summary:
Part of the migration of .inferconfig-specific options into options accepted
both by .inferconfig and the CLI.
This changes the behaviour of Infer in that we now create matchers eagerly
instead of lazily. I think it's ok because I suspect what's really important is
not laziness but memoisation, and thus laziness was just an implementation
detail. If I'm wrong please yell, it should be easy to revert to a lazy
behaviour if really needed.
Reviewed By: jberdine
Differential Revision: D3304792
fbshipit-source-id: 1ddde6d
Summary:
The checkers check was causing perf issues because it kept loading the json of
inferconfig. To prevent this from happening again, load json files inside
config.ml, and only export `Yojson.Basic.json Lazy.t` values to other modules.
Also move the list of checks disabled by default into config.ml for better
discoverability.
Reviewed By: jberdine
Differential Revision: D3293041
fbshipit-source-id: 4a38b26
Summary:
Reimplement command line options in preparation for uniformly passing
options from the top-level infer driver that invokes a build command
through the build system to the descendant infer processes.
All command line options of all executables are collected into Config,
and declared using a new CommandLineOption module that supports
maintining backward compatibility with the current command line
interface. Very few values representing command line options are
mutable now, as they are set once during parsing but are constant
thereafter. All ordering dependencies are contained within the
implementation of Config, and the implementation of Config is careful to
avoid unintended interactions and ordering dependencies between options.
Reviewed By: jvillard
Differential Revision: D3273345
fbshipit-source-id: 8e8c6fa
Summary:public
Report statistics on consumed time and memory in results_dir/perf_stats.json.
Reviewed By: martinoluca
Differential Revision: D3162381
fb-gh-sync-id: e802faa
fbshipit-source-id: e802faa
Summary:public
Eliminate the use of the -open Utils command line option passed to the compiler in favor of `open! Utils` in each source file. While slightly convenient, this option causes more headaches than it is worth with other tools e.g. merlin.
Reviewed By: jvillard
Differential Revision: D3168193
fb-gh-sync-id: 4285ef6
fbshipit-source-id: 4285ef6
Summary: public Like the pre-analysis, these should be called for every CFG. This is a stepping stone toward getting rid of remove_tmps and making it part of the liveness analysis.
Reviewed By: jvillard
Differential Revision: D3059021
fb-gh-sync-id: 3a8d818
shipit-source-id: 3a8d818
Summary:public
Generalize command line option parsing to query an environment variable
for args, and then parse the environment and command line arguments.
Each executable uses a distinct environment variable:
- InferAnalyze: INFER_ARGS
- InferJava: INFERJAVA_ARGS
- InferClang: INFERCLANG_ARGS
- InferLLVM: INFERLLVM_ARGS
- checkCopyright: CHECKCOPYRIGHT_ARGS
For now these variables need to be set manually. So the usability is
still pretty bad, but is a step in the direction of enabling debugging
the analyzer on code built with buck.
Reviewed By: cristianoc, martinoluca
Differential Revision: D2987288
fb-gh-sync-id: f477611
shipit-source-id: f477611
Summary:public
Use the configuration file .inferconfig to model the library method that are considered expensive
Reviewed By: cristianoc
Differential Revision: D3045288
fb-gh-sync-id: e58d85c
shipit-source-id: e58d85c
Summary:public
Simplifies the code to collect the `SuppressWarnings` annotations and makes the code more robust in the sense that not finding the output of the annotation processor will result in an error directly at the top-level instead of later on when trying to load the output file in the Java frontend.
Reviewed By: sblackshear
Differential Revision: D3034690
fb-gh-sync-id: 60caa0c
shipit-source-id: 60caa0c
Summary:public
Instead of using the collection of suppress warnings annotations to filter out the errors while generating the error reports, we just add this SuppressWarnings at translation time, like any other annotations, and the reporting functions in the Reporting module will just skip the errors when the method is annotated with SuppressWarnings.
This allows us to have a suppress warnings mechanism that is independant from the integration with the build system.
Reviewed By: sblackshear
Differential Revision: D3012395
fb-gh-sync-id: 35f5f9b
shipit-source-id: 35f5f9b
Summary:public
I have seen enough comments in this space by people during code review to switch on the analyses the compiler can already do. This diff is an automated renaming of unused identifiers to _, with a few additional changes made when reading the diff of the results for things that stood out as particularly strange. This base-lines all of the existing warnings. I'm not sure this is a good idea, since it might be better for those familiar with each part of the code to look at these warnings and use them as pointers to suspicious code.
Reviewed By: jeremydubreil
Differential Revision: D2938376
fb-gh-sync-id: 6e67817
shipit-source-id: 6e67817
Summary:
public
While playing with the type environment for Java, I realised that the types in models.jar where not re-generated when modifying Infer. As a consequence, some changes in Infer where surprisingly having no effect. This diff forces the type environment to be absent when analyzing the models.
Reviewed By: sblackshear
Differential Revision: D2802517
fb-gh-sync-id: 1c2673a
Summary:
public
Infer would previously give confusing reports in the following case: two classes `foo.MyClass` defined in `MyClass.java` under directory `foo/` and `bar.MyClass` defined in file `MyClass.java` under `bar/` are compiled together in a single call to the Java compiler. Then the errors in `foo/MyClass.java` could potentially be reported in `bar/MyClass.java`, or the other way around.
The reason is: Infer starts the translation from the bytecode which only contains information about the base filename in the metadata. For example, both `foo.MyClass` and `bar.MyClass` will contains the information that the source file is `MyClass.java` but not the full path to the actual source file (hopefully).
In order to cope with this issue, this diff adds the possibility to read the package declaration from the source file so that we can map classes to the source files these classes are defined without ambiguity. In order to avoid having to open and read the source files when not necessary, the code will behave as before as long as no name conflict is found. Otherwise, it will only load and search for the package declaration when two or more sources files have the same basename but are defined in different subdirectories.
Closes t9395275
Reviewed By: jberdine
Differential Revision: D2763775
fb-gh-sync-id: 0adc1ac
Summary: public
The harness was created all the time but we do not report issues comming from the harness right now. The option:
infer --android-harness -- <build command>
Allows to create the harness
Reviewed By: sblackshear
Differential Revision: D2595211
fb-gh-sync-id: c7a6dc5
Summary: public
This allow to tell Infer to skip the translation of some files. This is especially useful to skip the translation of some generated files following the syntax:
> cat .inferconfig
{
"skip_translation": [
{
"language": "Java",
"source_contains": "_SHOULD_BE_SKIPPED_"
}
]
}
Reviewed By: cristianoc
Differential Revision: D2588095
fb-gh-sync-id: 3fda816
Summary: public
modules are better for namespacing.
How I made this diff:
1. moved list_* functions from utils.ml{,i} to iList.ml{,i}
2. shell commands:
grep '^val ' infer/src/backend/iList.mli | cut -f 2 -d ' ' | tr '\n' ' '
# gives a list of former list_ functions that IList implements, fed into the loops below:
LISTNAMES=" compare equal append combine exists filter flatten flatten_options find fold_left fold_left2 for_all for_all2 hd iter iter2 length fold_right map mem nth partition rev rev_append rev_map sort split stable_sort tl drop_first drop_last rev_with_acc remove_duplicates remove_irrelevant_duplicates merge_sorted_nodup intersect mem_assoc assoc map2 to_string"
# replace " list_*" function calls with IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/ list_$i\b/ IList.$i/g" \{\} \; ; done
# replace (list_* functions with (IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/(list_$i\b/(IList.$i/g" \{\} \; ; done
# ditto with [
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/\[list_$i\b/[IList.$i/g" \{\} \; ; done
3. Then fix up the rest by hand. In particular, stuff that called Utils.list_*
explicitely, and stuff that used the "Fail" exception that has moved to
IList. (may revisit this in the future)
Reviewed By: jeremydubreil, cristianoc
Differential Revision: D2550241
fb-gh-sync-id: cd64b10
Summary:
There's a lot of overlap between the representation of a proc desc and a spec summary. This diff moves all the data in common to the single record proc_attributes defined in Sil.
This gives a unified way of accessing most of the data carried by a procedure, whether it is contained in a proc desc or a spec. Also, it ensures that there is a single flow of information from proc desc to spec in the back-end, making sure that the information represented stays consistent.
Summary:
This commit is the result of
`find infer/src -name '*.ml' -or -name '*.mli' -exec ocp-indent -i \{\} \;`
and
`INFER_CHECK_COPYRIGHT=1 InferPrint`
Josh Berdine
Sam Blackshear
Jules Villard
Cristiano Calcagno
jrm
Rohan Jacob-Rao
Open Source Synchronization