Summary:
Found the dead code with the script in the next commit, iteratively until no
warnings remained.
Methodology:
1. I kept pretty-printers for values, which can be useful to use from infer's REPL (or
when printf-debugging infer in general)
2. I kept functions that formed some consistent API (but not often, so YMMV), for instance if it looked like `Set.S`, or if it provides utility functions for stuff in development (mostly the procname dispatcher functions)
3. I tried not to lose comments associated with values no longer exported: if the value is commented in the .mli and not the .ml, I moved the comment
4. Some comments needed updating (not claiming I caught all of those)
5. Sometimes I rewrote the comments a bit when I noticed mis-attached comments
Reviewed By: mbouaziz
Differential Revision: D6723482
fbshipit-source-id: eabaafd
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Change the API of `Logging` wrt to writing to files and to the console (see
changes in logging.mli).
Write only to one log file: infer-out/log. Prefix each line with the kind of
warning and the PID of the process emitting it. Writing with `O_APPEND` is
atomic so the file should not get garbled by concurrent writes. To get the
output of a single process, find out which one interests you by looking at
infer-out/log, then `grep ^[<PID>] infer-out/log`.
Introduce 3 log levels for debug output and command-line options to set them
for various categories individually.
Change tons of `"\n"` to `"@\n"` so the `Format` module is aware of newlines
without us having to look through every character of every logged string for
`\n` characters.
Reviewed By: mbouaziz
Differential Revision: D5165317
fbshipit-source-id: 93c922f
Summary:
A recent diff tried to replace `L.out "error message"; assert false` with
`failwith "error message"` but infer relies on the type of raised exceptions to
sometimes keep going. A more careful change will be needed but in the meantime
restore the old behaviour.
Reviewed By: jberdine
Differential Revision: D5112969
fbshipit-source-id: 713fe20
Summary:
Try and enforce the following rules:
- stderr is for updating the user about progress or errors
- Introduce Logging.progress that outputs to stderr, but honours --quiet
- Logging.stderr is as before
- Logging.out now prints to stderr (or to log files as before if set up) and
not stdout. If some information should go on stdout then the user should be
able to rely on it (ie, it's not just some progress message). For now only
the summary of the errors is printed on stdout by default.
- Logging.err* functions are gone. If the error is user-visible, it should be
Logging.stderr, or `failwith`. If not, go to the same log file as other
output, which personally I find much more convenient than having to dig through
2 log files every time I'm looking for some output.
Reviewed By: jberdine
Differential Revision: D5095720
fbshipit-source-id: 68999c9
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary:
Replace disequalities to Attribute expressions with predicate symbol
application pure atomic formulas.
This diff should preserve existing behavior, up to the comparison order
of attribute disequalities versus predicate applications.
Reviewed By: sblackshear
Differential Revision: D3647049
fbshipit-source-id: c39a901
Summary: Move Sil.binop type and operations into separate Binop module.
Reviewed By: dulmarod
Differential Revision: D3548082
fbshipit-source-id: 356bee3
Summary: Move Sil.unop type and operations into separate Unop module.
Reviewed By: dulmarod
Differential Revision: D3548077
fbshipit-source-id: 49d3d83
Summary: Move Sil.const type and operations into separate Const module.
Reviewed By: dulmarod
Differential Revision: D3548073
fbshipit-source-id: 388d03e
Summary:
Move attribute values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: cristianoc
Differential Revision: D3548055
fbshipit-source-id: 31a9121
Summary:
Move closure values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: sblackshear
Differential Revision: D3541364
fbshipit-source-id: 1a2f998
Summary:
Move exception values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: sblackshear
Differential Revision: D3541355
fbshipit-source-id: f22e0ba
Summary:
Now that array types record only static - and therefore constant -
lengths, Sil typ and exp no longer need to be mutually recursive.
This diff:
- splits the recursion in the type definitions of typ and exp,
- splits the recursion in the comparison and pretty-printing
functions,
- and then refactors typ into a separate module.
Reviewed By: cristianoc
Differential Revision: D3423575
fbshipit-source-id: 6130630
Summary:
Array types where the length is not statically known were represented
using fresh variables. This diff:
- Makes array type length optional, reducing the amount of work needed
for renaming, substitution, and normalization.
- Revises uses of array length so that the length component of a
Tarray type represents only the statically determined constant
length of an array type, and the length component of a Sizeof
expression represents the dynamically determined length of an array
value.
- Restricts the type of static lengths from a general expression
(Sil.exp) to an integer (Sil.Int.t), enforcing that static types are
constant. This in particular ensures that types contain no
variables, and so are invariant under operations such as renaming
and substitution.
- Removes the type substitution and renaming functions typ_sub,
typ_normalize, and typ_captured_ren. Now that array type lengths
are constant integers, all of these functions are the identity.
Reviewed By: cristianoc
Differential Revision: D3387343
fbshipit-source-id: b5db768
Summary:
Reimplement command line options in preparation for uniformly passing
options from the top-level infer driver that invokes a build command
through the build system to the descendant infer processes.
All command line options of all executables are collected into Config,
and declared using a new CommandLineOption module that supports
maintining backward compatibility with the current command line
interface. Very few values representing command line options are
mutable now, as they are set once during parsing but are constant
thereafter. All ordering dependencies are contained within the
implementation of Config, and the implementation of Config is careful to
avoid unintended interactions and ordering dependencies between options.
Reviewed By: jvillard
Differential Revision: D3273345
fbshipit-source-id: 8e8c6fa
Summary:public
Eliminate the use of the -open Utils command line option passed to the compiler in favor of `open! Utils` in each source file. While slightly convenient, this option causes more headaches than it is worth with other tools e.g. merlin.
Reviewed By: jvillard
Differential Revision: D3168193
fb-gh-sync-id: 4285ef6
fbshipit-source-id: 4285ef6
Summary:public
I have seen enough comments in this space by people during code review to switch on the analyses the compiler can already do. This diff is an automated renaming of unused identifiers to _, with a few additional changes made when reading the diff of the results for things that stood out as particularly strange. This base-lines all of the existing warnings. I'm not sure this is a good idea, since it might be better for those familiar with each part of the code to look at these warnings and use them as pointers to suspicious code.
Reviewed By: jeremydubreil
Differential Revision: D2938376
fb-gh-sync-id: 6e67817
shipit-source-id: 6e67817
Summary: public
modules are better for namespacing.
How I made this diff:
1. moved list_* functions from utils.ml{,i} to iList.ml{,i}
2. shell commands:
grep '^val ' infer/src/backend/iList.mli | cut -f 2 -d ' ' | tr '\n' ' '
# gives a list of former list_ functions that IList implements, fed into the loops below:
LISTNAMES=" compare equal append combine exists filter flatten flatten_options find fold_left fold_left2 for_all for_all2 hd iter iter2 length fold_right map mem nth partition rev rev_append rev_map sort split stable_sort tl drop_first drop_last rev_with_acc remove_duplicates remove_irrelevant_duplicates merge_sorted_nodup intersect mem_assoc assoc map2 to_string"
# replace " list_*" function calls with IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/ list_$i\b/ IList.$i/g" \{\} \; ; done
# replace (list_* functions with (IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/(list_$i\b/(IList.$i/g" \{\} \; ; done
# ditto with [
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/\[list_$i\b/[IList.$i/g" \{\} \; ; done
3. Then fix up the rest by hand. In particular, stuff that called Utils.list_*
explicitely, and stuff that used the "Fail" exception that has moved to
IList. (may revisit this in the future)
Reviewed By: jeremydubreil, cristianoc
Differential Revision: D2550241
fb-gh-sync-id: cd64b10
Summary:
This commit is the result of
`find infer/src -name '*.ml' -or -name '*.mli' -exec ocp-indent -i \{\} \;`
and
`INFER_CHECK_COPYRIGHT=1 InferPrint`
Jules Villard
Josh Berdine
Andrzej Kotulski
Cristiano Calcagno
Sam Blackshear
Open Source Synchronization