Summary:
It abstracts the environments required in modeling functions and type
declarations as a record type.
Reviewed By: mbouaziz
Differential Revision: D7065996
fbshipit-source-id: b60cd3c
Summary:
It prunes abstract memories on `assert` commands.
Problem: Since the assert command is sometimes translated to two
sequential `if` statments, it was not able to prune the memory
precisely at `assert` commands in Inferbo---the pruned memory at the
first branch was joined before the second branch.
Solution: To avoid losing the pruning information at the first branch,
now, it records which locations are pruned at the first branch and
applies the same pruning at the next branch if they have
semantically the same condition.
Reviewed By: mbouaziz
Differential Revision: D6895919
fbshipit-source-id: 15ac1cb
Summary: The heuristics to determine the end of a block/procedure was too brittle, the new one ignores non significant instructions.
Reviewed By: jvillard
Differential Revision: D6845380
fbshipit-source-id: feab557
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary:
Model for `folly::split` that handles the representation in the cpp model.
Depends on D6544992
Reviewed By: jvillard
Differential Revision: D6545006
fbshipit-source-id: 2b7a139
Summary: There was a back and forth conversion between `string` and `IssueType.t` which was not necessary.
Reviewed By: sblackshear
Differential Revision: D6562747
fbshipit-source-id: 70b57a2
Summary:
It seems that the abstraction instructions were not previously added the the CFG.
This is a functional changes to make sure that the abstraction state is always added. We can simplify the code later and just run this step before storing the CFG instead of after loading them.
Reviewed By: sblackshear, jvillard
Differential Revision: D6383672
fbshipit-source-id: cedcb8a
Summary:
justmovingthingsaround
Models need these functions, they have to be somewhere else.
The split might seem weird for now but will (hopefully) look more obvious in the following diff.
Reviewed By: skcho
Differential Revision: D6408322
fbshipit-source-id: c7e430f
Summary:
- Plug model checkers
- Add alloc size safety condition on alloc of negative, zero or big size
Reviewed By: sblackshear
Differential Revision: D6375144
fbshipit-source-id: bbea6f3
Summary:
A modeled function is not only an evaluator but also a checker, at least in Inferbo where both things happen in two passes.
This diff just prepares for it without generating new alarms.
Reviewed By: jvillard
Differential Revision: D6373051
fbshipit-source-id: 264696f
Summary:
Allow capturing function arguments.
Model functions don't have to match on a list any more.
Depends on D6347829
Reviewed By: jvillard
Differential Revision: D6350628
fbshipit-source-id: e88b758
Summary:
First steps of a dispatcher for C++ functions/methods overloads.
For now only used on Inferbo C modeled functions so most of the features are still unused.
Reviewed By: jvillard
Differential Revision: D6336088
fbshipit-source-id: ebd5b6f
Summary:
...so I just removed it
+ renamed `loc` of type `Location.t` to `location` to differentiate from `Loc.t` values
Reviewed By: jvillard
Differential Revision: D6358413
fbshipit-source-id: 2d3eba9
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
:
As we want to model many C++ methods, using a lot of matchers with `if / else if` will be tiring.
This diff introduces a dispatcher which is a nicer way to write the same thing.
No new model for now, just a refactoring.
Ideally we'd need a parser generator for C++ names...
Reviewed By: jvillard
Differential Revision: D6209234
fbshipit-source-id: 49fae5e
Summary:
vector::data returns a pointer to the first value of the vector.
- The size of the (array) pointer should be the same with the vector.
- The pointer should point to the same abstract value with the vector.
Reviewed By: mbouaziz
Differential Revision: D6196592
fbshipit-source-id: cc17096
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
A specific type of alias is added for the vector::empty() result and it is used at pruning.
Now, there are two types of aliases:
- "simple" alias: x=y
- "empty" alias: x=v.empty() and y=v.size
So, if x!=0, y is pruned by (y=0). Otherwise, i.e., x==0, y is pruned by (y>=1).
Reviewed By: mbouaziz
Differential Revision: D6004968
fbshipit-source-id: bb8d50d
Summary:
Move Inferbo safety conditions to their own file.
Split the old `Condition.t` to a condition together with a trace.
This will ease having: different kind of condition and several traces for the same condition (see following diff)
Reviewed By: jvillard
Differential Revision: D5942030
fbshipit-source-id: d74a612
Summary: A bottom interval in a safety condition doesn't make sense. Let's not allow it at all.
Reviewed By: skcho
Differential Revision: D5941552
fbshipit-source-id: 6bd2a65
Summary: Use `pp` functions until it needs to be turned into a string.
Reviewed By: jvillard
Differential Revision: D5941473
fbshipit-source-id: 87ca9df
Summary:
The interval bound of the abstract domain is extended.
`[min|max](int, symbol)` => `int [+|-] [min|max](int, symbol)`
As a result, `vector::empty` can be modelled to return a more precise value: `1 - min(1, size)`.
Reviewed By: mbouaziz
Differential Revision: D5899404
fbshipit-source-id: c8c3f49
Summary:
Read the documentation and it doesn't seem like these functions are guaranteed to choose the same value in different runs.
I hypothesize that these may be the source of flakiness in the thread-safety tests/smoke tests.
Reviewed By: jvillard
Differential Revision: D5794384
fbshipit-source-id: 02b7a96
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary:
Calling exit at the end of a proc does not create unreachable code, prior to this commit inferbo reports that it does.
We extend collect_instrs to detect when we're at the end of a procedure in C and not report on unreachable code if we call a procedure there.
Reviewed By: mbouaziz
Differential Revision: D5623637
fbshipit-source-id: 0d5f326
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
Problem: The analyzer did not know that the value of `v.size()` is an alias of `v.infer_size`, so `v.infer_size` is not pruned by the if condition. As a result it raises a false alarm.
void safe_access(std::vector<int> v) {
if (v.size() >= 10) {
v[9] = 1; // error: BUFFER_OVERRUN Offset: [9, 9] Size: [5, 5]
}
}
void call_safe_access_Good() {
std::vector<int> v(5, 0);
safe_access(v);
}
Solution: Adding alias for return value to the abstract domain.
Now Inferbo can prune `v.infer_size` because it knows that the value of `v.size()` is an alias of `v.infer_size`. There is already an alias domain in Inferbo, so we added a specific room for the retrun value.
Reviewed By: jvillard, mbouaziz
Differential Revision: D5396988
fbshipit-source-id: 4a4702c
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary: This could generate enormous amounts of logs on medium-sized projects (eg rocksdb) when running with `--stats`. Review other debug levels in inferbo as well.
Reviewed By: mbouaziz
Differential Revision: D5364139
fbshipit-source-id: 5c8d206
Summary: Unknown library returns the unknown pointer as well as the top interval.
Reviewed By: mbouaziz, jvillard
Differential Revision: D5282669
fbshipit-source-id: 34c7e18
Summary:
:
Do not store dummy `_` into the stack.
This makes debugging a lot easier
Reviewed By: skcho
Differential Revision: D5275941
fbshipit-source-id: ce329a5
Summary:
After D5245416 I was taking a closer look and decided it's best to get rid of the `Interprocedural` module altogether.
Since jeremydubreil's refactoring to pass the summaries around everywhere, this module doesn't do much (it used to make sure the summary actually got stored to disk).
Client code is shorter and simpler without this module.
Reviewed By: mbouaziz
Differential Revision: D5255400
fbshipit-source-id: acd1c00
Summary: The docs for this said that it stores the summary to disk, which is no longer true. `compute_summary` is more descriptive of what it actually does now.
Reviewed By: jberdine
Differential Revision: D5245416
fbshipit-source-id: f5138cd
Summary:
Now that we can run several inter-procedural analyses at the same time, we should no longer use the function `Reporting.log_error_deprecated` as it logs the errors in the specs table. This specs table is normally used for caching and will be deprecated in favor of having a cache summaries for the callees in the `Ondemand` module (to avoid deserialising a callee more than once within the same process).
This revision just renames the reporting functions.
Reviewed By: sblackshear
Differential Revision: D5205009
fbshipit-source-id: b066549
Summary:
Change the API of `Logging` wrt to writing to files and to the console (see
changes in logging.mli).
Write only to one log file: infer-out/log. Prefix each line with the kind of
warning and the PID of the process emitting it. Writing with `O_APPEND` is
atomic so the file should not get garbled by concurrent writes. To get the
output of a single process, find out which one interests you by looking at
infer-out/log, then `grep ^[<PID>] infer-out/log`.
Introduce 3 log levels for debug output and command-line options to set them
for various categories individually.
Change tons of `"\n"` to `"@\n"` so the `Format` module is aware of newlines
without us having to look through every character of every logged string for
`\n` characters.
Reviewed By: mbouaziz
Differential Revision: D5165317
fbshipit-source-id: 93c922f
Sungkeun Cho
Mehdi Bouaziz
Josh Berdine
Sam Blackshear
Jeremy Dubreil
Jules Villard
Greg Nisbet
Kihong Heo