Summary:
The python scripts support this option but don't do anything with it. Note:
This doesn't remove support for android harnesses.
Reviewed By: sblackshear
Differential Revision: D5501019
fbshipit-source-id: 14c4e3f
Summary:
Better to bail early than have mysterious failures. These used to have the wrong error messages:
```
$ cd examples/android_hello/
$ infer -- ./gradlew rubbish
Capturing in gradle mode...
Running and capturing gradle compilation...
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] FAILURE: Build failed with an exception.
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] * What went wrong:
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] Task 'rubbish' not found in root project 'android_hello'.
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] * Try:
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] Run gradlew tasks to get a list of available tasks. Run with --stacktrace option to get the stack trace.
Nothing to compile. Try running `./gradlew clean` first.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 66))
$ cd -
$ infer --flavors --Xbuck --keep-going -- buck build //toto:toto
Capturing in buck mode...
moving files in buck-out to buck-out/.trash/buck-outwiiL6N
Not using buckd because watchman isn't installed.
BUILD FAILED: No build file at toto/BUCK when resolving target //toto:toto#infer.
Buck failed, but continuing the analysis because --keep-going was passed
Not using buckd because watchman isn't installed.
No build file at toto/BUCK when resolving target //toto:toto#infer.
Traceback (most recent call last):
File "/home/jul/infer/infer/bin/../lib/python/infer.py", line 186, in <module>
main()
File "/home/jul/infer/infer/bin/../lib/python/infer.py", line 168, in main
capture_exitcode = imported_module.gen_instance(args, cmd).capture()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 89, in capture
return self.capture_with_flavors()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 242, in capture_with_flavors
result_paths = self._get_analysis_result_paths()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 148, in _get_analysis_result_paths
out = [x.split(None, 1)[1] for x in buck_output.strip().split('\n')]
IndexError: list index out of range
ERROR: (Unix.Exit_or_signal (Exit_non_zero 1))
$ cd infer/build_systems/ant/ && infer -- ant rubbish
Capturing in ant mode...
BUILD FAILED
Target "rubbish" does not exist in the project "null".
at org.apache.tools.ant.Project.tsort(Project.java:1929)
at org.apache.tools.ant.Project.topoSort(Project.java:1837)
at org.apache.tools.ant.Project.topoSort(Project.java:1800)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Total time: 0 seconds
Nothing to compile. Try running `ant clean` first.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 66))
```
Now we fail better, for instance:
```
$ infer --flavors --Xbuck --keep-going -- buck build //toto:toto
Capturing in buck mode...
moving files in buck-out to buck-out/.trash/buck-outHag8Ji
Not using buckd because watchman isn't installed.
BUILD FAILED: No build file at toto/BUCK when resolving target //toto:toto#infer.
Buck failed, but continuing the analysis because --keep-going was passed
Not using buckd because watchman isn't installed.
No build file at toto/BUCK when resolving target //toto:toto#infer.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 70))
$ cd infer/build_systems/ant/ && infer -- ant rubbish
Capturing in ant mode...
BUILD FAILED
Target "rubbish" does not exist in the project "null".
at org.apache.tools.ant.Project.tsort(Project.java:1929)
at org.apache.tools.ant.Project.topoSort(Project.java:1837)
at org.apache.tools.ant.Project.topoSort(Project.java:1800)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Total time: 0 seconds
ERROR: couldn't run compilation command `['ant', '-verbose', u'rubbish']`
ERROR: (Unix.Exit_or_signal (Exit_non_zero 1))
```
Reviewed By: jeremydubreil
Differential Revision: D5469607
fbshipit-source-id: a3eb05c
Summary:
The previous version
- assumed that `infer` was in `PATH`
- would pick any old `infer` in `PATH` and not necessarily the right version
Reviewed By: mbouaziz
Differential Revision: D5433624
fbshipit-source-id: a59be3d
Summary:
This reverts commit 7177bb6b8af1404fde408ead4750ef48ed9bdaff.
In practice, `extract_filepath` exhausts the call stack, leading to "RuntimeError: maximum recursion depth exceeded" exceptions. Perhaps a loop needs to be used instead.
Reviewed By: jvillard
Differential Revision: D5409892
fbshipit-source-id: 09ccccd
Summary:
1. Allow it to forward -version calls to javac (so that if the build system wants
to check the compiler version it doesn't end up with Infer's version)
2. Preserve empty arguments:
javac -bootclasspath "" -classpath a.jar ...
currently gives:
javac: invalid flag: a.jar
Closes https://github.com/facebook/infer/pull/688
Differential Revision: D5406058
Pulled By: jvillard
fbshipit-source-id: 7fa1bcf
Summary:
It is not used, so one fewer thing to track inside Python.
Note that Python does pass `--buck` to OCaml infer to make it aware that it is
running from within Buck, and the OCaml code uses that flag to trim infer-out
to only what's strictly necessary (and especially to remove non-deterministic
output that would mess with Buck's cache).
Reviewed By: jberdine
Differential Revision: D5200043
fbshipit-source-id: 1c84442
Summary: This also allows us to better test that the new commands will keep working.
Reviewed By: jeremydubreil
Differential Revision: D5172891
fbshipit-source-id: 169bd6f
Summary: There were some leftover uses of the `Tracing` analyzer option. While I was at it, I also rename the `Config` option name.
Reviewed By: jberdine
Differential Revision: D5113489
fbshipit-source-id: 68d5cc8
Summary:
Try and enforce the following rules:
- stderr is for updating the user about progress or errors
- Introduce Logging.progress that outputs to stderr, but honours --quiet
- Logging.stderr is as before
- Logging.out now prints to stderr (or to log files as before if set up) and
not stdout. If some information should go on stdout then the user should be
able to rely on it (ie, it's not just some progress message). For now only
the summary of the errors is printed on stdout by default.
- Logging.err* functions are gone. If the error is user-visible, it should be
Logging.stderr, or `failwith`. If not, go to the same log file as other
output, which personally I find much more convenient than having to dig through
2 log files every time I'm looking for some output.
Reviewed By: jberdine
Differential Revision: D5095720
fbshipit-source-id: 68999c9
Summary: The Buck cache was not correctly invalidated when switching between the different analysis mode. This was causing the analysis results to be mixed up. This revision should fix this.
Reviewed By: sblackshear
Differential Revision: D5073606
fbshipit-source-id: eb14418
Summary:
The code was pretty fragile, it's less fragile now. We should probably just
delete that and start outputting proper class/package info directly in the
report.json instead of reverse-engineering them.
Fixes#640
Reviewed By: jeremydubreil
Differential Revision: D4905973
fbshipit-source-id: 1590067
Summary:
Introduce `infer-<command>` for each command, except for internal commands
(only `infer-clang` for now) which are not exported. Install these executables
(which are just symlinks to `infer`) on `make install`. The main executable
looks at the name it was invoked with to figure out if it should behave as a
particular command.
Get rid of `InferClang`, `InferAnalyze`, and `InferPrint`. As a bonus, we now
only need to build one executable: `infer`, which should be a few seconds
faster (less link time).
`InferAnalyze` is now `infer-analyze` and `InferPrint` is `infer-print`. To run
`InferClang`, use a symlink named `clang`, `clang++`, etc. to `infer`. There
are such symlinks available in "infer/lib/wrappers/" already.
I also noticed that the scripts in xcodebuild_wrappers/ don't seem useful
anymore, so use wrappers/ instead, as for `make`.
Reviewed By: mbouaziz
Differential Revision: D5036495
fbshipit-source-id: 4a90030
Summary:
The error was complaining about a missing `etree` package but that's actually
part of the `lxml` package and that wasn't clear from the output.
See for instance https://github.com/facebook/infer/issues/635
Reviewed By: martinoluca
Differential Revision: D4905953
fbshipit-source-id: 28b26af
Summary:
This option is not needed anymore as it was introduced to counter an uncovered
perf issue with creating human readable reports. The perf issue has been
addressed.
Instead of this option, one can use `infer --report-hook /bin/true ...` to
disable reporting. However, right now the Buck integration doesn't honor it so
this would need to be fixed to be a true equivalent of `--disable-bug-list`.
Reviewed By: jberdine
Differential Revision: D4712877
fbshipit-source-id: a09304f
Summary:
Make sure `inferTraceBugs` works with non-ascii characters. Harden the code a
bit more on the way.
Fixes#592
Reviewed By: mbouaziz
Differential Revision: D4659016
fbshipit-source-id: 79f7a80
Summary: Shorter is better. `--compilation-database` was taken, renaming it to `--buck-compilation-database`.
Reviewed By: dulmarod
Differential Revision: D4567028
fbshipit-source-id: 011cd6f
Summary:
Hi!
It's quite common to have collections of delegates. The collection itself is usually named like "delegatesHash", "delegatesStorage" or simply "delegates". Obviously, there is common part in all these cases, but currently you're excluding property only if it contains "queue".
I've added a simple exclusion by common part. It solved false-positive warnings for me and I think for others it'll be quite helpful too.
Closes https://github.com/facebook/infer/pull/582
Reviewed By: ddino
Differential Revision: D4565221
Pulled By: dulmarod
fbshipit-source-id: c48242e
Jules Villard
Josh Berdine
Pavel Grafov
Dulma Churchill
Alexander Slesarev
Martino Luca
Don Stewart
Jeremy Dubreil
Dino Distefano
Sam Blackshear
htxs
Nikita Anisimov