Summary:
Main changes are:
1. Dune can promote targets into the source tree as a part of build. This
allows us to **remove custom promotion/installation logic in src/Makefile**.
2. Dune promotion only works for path within workspace. This required
**moving dune-workspace one folder up**: from infer/infer/src to infer/infer.
But this is not bad, since it makes it possible to migrate tests under dune at some point.
3. `checkCopyright` now also promoted into `infer/infer/bin` instead of
`infer/scripts` partly for consistency and partly because of the
dune-workspace location.
4. `byte` mode was replaced with `byte_complete`. The latter takes
similar amount of time to build compared to `byte`, but produces
standalone binaries that don't require InferCStubs to be
installed. This allowed to remove `dune_exec_shim` and custom logic
around `dune build InferCStubs.install` when dealing with byte
targets.
All in all, `infer/src/Makefile` is not about 2/3 its previous size
with less custom logic in Makefiles/scripts and more encoded in dune
build files.
Reviewed By: jvillard
Differential Revision: D20303902
fbshipit-source-id: 9e4c65bd0
Summary: we no longer use buck for tests and the script has no reason to exist
Reviewed By: dulmarod
Differential Revision: D4212713
fbshipit-source-id: 7bd1cca
Summary:public
This is needed to have a working `opam install infer`. Actual working `opam
install infer` in a follow-up diff.
Reviewed By: jberdine
Differential Revision: D3109308
fb-gh-sync-id: 49d7276
fbshipit-source-id: 49d7276
Summary: public
This unclutters infer/bin/ and gives more structure to infer/lib/
Reviewed By: jeremydubreil
Differential Revision: D2605809
fb-gh-sync-id: 508fc2c
Summary: public
Adding a progress bar to the analysis phase to check progress.
The progress bar for the analysing procedures part is just printing dots at the moment and will be
improved soon when we do all the multithreading inside Ocaml.
There is also a no_progress_bar option in the scripts to hide it, for instance in CI.
Reviewed By: cristianoc
Differential Revision: D2625763
fb-gh-sync-id: daf6f96
Summary: public
Adding initial support for Buck for Cxx on the toplevel infer command.
If a `cxx_binary`/`cxx_library` builds with the command `buck build //targetName:target` then the analysis of Infer can be triggered through the `#infer` flavor.
This change configures buck to run Infer, whenever the `#infer` flavor gets passed: just run
`infer --use-flavors -- buck build //targetName:target#infer`
Please note that when using this feature (`--use-flavors`), the toplevel `infer` command has to be launched from the root of the buck project (which is where the `.buckconfig` file is located) and the `#infer` flavor must be passed on the target.
Reviewed By: jvillard
Differential Revision: D2508296
fb-gh-sync-id: 63c0dea
Summary: public
For instance:
cd examples/
infer -- gcc -c hello.c
gives:
Starting analysis (Infer version git-c66ed7b302c996f238b6ec20cfcf4f6193fcbd88)
Analysis done
hello.c:5: error: NULL_DEREFERENCE
pointer s last assigned on line 4 could be null and is dereferenced at line 5, column 3
3. void test() {
4. int *s = NULL;
5. > *s = 42;
6. }
Reviewed By: jeremydubreil
Differential Revision: D2600864
fb-gh-sync-id: 71e0bd4
Summary: public
Add a `--html` options to inferTraceBugs to generate html reports.
Reviewed By: jeremydubreil
Differential Revision: D2595895
fb-gh-sync-id: adfa757
Summary: public
Extends the current activity leak checker to all sort of context leaks.
Reviewed By: sblackshear
Differential Revision: D2572548
fb-gh-sync-id: 9da18e4
Summary: public
The harness was created all the time but we do not report issues comming from the harness right now. The option:
infer --android-harness -- <build command>
Allows to create the harness
Reviewed By: sblackshear
Differential Revision: D2595211
fb-gh-sync-id: c7a6dc5
Summary: public
The option `-a compile` was previously doing the same thing as `-a capture`. This option is very useful to debug the integration with the build systems.
Reviewed By: jvillard
Differential Revision: D2554816
fb-gh-sync-id: 95f32c2
Summary: public Refactoring Printfargs checker a bit to
make it callable from symbolic executor, then calling it.
Reviewed By: jeremydubreil
Differential Revision: D2361286
fb-gh-sync-id: 4b73855
Summary: @public
There was an inconsistency with the type of `stats.json` created by `inferlib.py` and InferAnalyze. This diff cleans up the thing and uses two different files to saves the statistics to clarify what gets created by the analysis, i.e. `proc_stats.json` and what gets created all the time `stats.json`.
Reviewed By: @sblackshear
Differential Revision: D2500517
Summary:
The python parser for '-d <dir>' interpreted '-deprecation'
as '-d eprecation', which is not desirable. Fixed it by teaching the parser to
parse '-deprecation' as a boolean flag.
Summary:
It can be useful in some situations for Infer to exit with an error code in
case it found a bug. A bug is anything Infer reports in infer-out/report.json.
This adds a flag `--fail-on-bug` to the toplevel infer script.
closes#139
Summary:
Passing the list of SuppressWarnings annotations detected during the compilation to InferPrint. The next step will be to add support for error filtering in .inferconfig and use the same mechanism. The annotation processor will generate an .inferconfig like config file and use it to suppress the reports.
Summary:
In order to use the annotation processor to detect the classes and methods annotated with `@SuppressWarnings`, we need to modified javac commands of the form:
javac -cp classpath File.java
into:
javac -cp annotations/processor.jar:classpath File.java
This diff is just a non-functional re-factoring step.
Summary:
No longer swallow compilation failures for javac. Before this diff, the compilation failures where raised:
> infer -- javac Test.java
Test.java:5: error: ';' expected
static String str = "Hello"
^
1 error
but the exit code was incorrect:
> echo $?
0
With this diff, the failing command is printed in standard error:
> infer -- javac Test.java
Javac compilation error with:
['javac', '-g', 'Test.java', '-J-Duser.language=en']
and the exit code is different from 0.
> echo $?
1
Summary:
While `-results_dir` is still the main place to look for specs files and to write reports,
it's necessary to load specs from multiple folders because some build tools that run Infer with a target-level granularity may need to move specs files around in order to get complete reports, whereas with this change they just need to keep track of the `specs` folders generated for each target, and pass them through `-lib dir1 -lib dir2 ... -lib dirN`
Summary:
Buck is creating javac compilation commands with arguments of the form:
-Opt={"list": ["pif", "paf", "pouf"]}
While converting command lines from bash to python, these option gets split into
['-Opt={"list":', '["pif",', '"paf",', '"pouf"]}']
instead of:
['-Opt={"list": ["pif", "paf", "pouf"]}']
which create the compilation to fail when running Infer even though the original files are compiling correctly.
Artem Pianykh
Jules Villard
Boris Valkov
Andrzej Kotulski
jrm
Dulma Rodriguez
Dino Distefano
martinoluca
Sam Blackshear
Rohan Jacob-Rao