Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary:
This avoids rebuilding the man pages at every build. Also add a `byte_infer`
target to build infer in bytecode + the models, and an `opt` target, as I found
myself missing those.
Reviewed By: mbouaziz
Differential Revision: D6761008
fbshipit-source-id: ffedd4b
Summary: This subdirectory was only containing tests related to nullable on Objective C.
Reviewed By: sblackshear
Differential Revision: D6657654
fbshipit-source-id: 11003f2
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary: This is to allow the bi-abduction analysis and the nullable checker for Clang languages to run together without stepping on each other toes.
Reviewed By: sblackshear
Differential Revision: D6567934
fbshipit-source-id: a318c33
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Buck reads the version on stderr or, very recently, from either stdout or stderr.
This makes infer output the version of stderr when called from Buck or invoked as javac, and on stdout otherwise.
Reviewed By: martinoluca
Differential Revision: D6098392
fbshipit-source-id: 23f1d5a
Summary: Tuareg is only useful for emacs, and `opam install tuareg` fails if emacs is not found.
Reviewed By: mbouaziz
Differential Revision: D6098693
fbshipit-source-id: 167628a
Summary: We will then be able to merge the tests for the other checkers without affecting these lab tests
Reviewed By: jvillard
Differential Revision: D6039433
fbshipit-source-id: e575ce9
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary: Example of combination between annotating fields with nullable and the biabduction analysis in Objective C
Reviewed By: dulmarod
Differential Revision: D5906016
fbshipit-source-id: b95c6e0
Summary: Useful to know if your build is going to take 40s or 4 minutes.
Reviewed By: jeremydubreil
Differential Revision: D5872878
fbshipit-source-id: 1d370f3
Summary:
Suggesting to add `_Nullable` on the fields checked for, or assigned to, `nullptr` will allow the biabduction analysis to report null dereferences that are related to the lifetime of objects.
Depends on D5832147
Reviewed By: sblackshear
Differential Revision: D5836538
fbshipit-source-id: c1b8e48
Summary:
With flambda (`-O3`), compilation time is ~5x slower, but the backend is ~25% faster!
To mitigate the atrocious compilation times, introduce a new `opt` build mode in the jbuilder files.
- build in "opt" mode by default from the toplevel (so that install scripts and external users get the fastest infer by default), in "default" mode by default from infer/src (since the latter is only called directly by infer devs, for faster builds)
- `make byte` is as fast as before in any mode
- `make test` will build "opt" by default, which is very slow. Solution for testing (or building the models) locally: `make BUILD_MODE=default test`.
- You can even change the default locally with `export BUILD_MODE=default`.
The benchmarks are to be taken with a sizable pinch of salt because I ran them only once and other stuff could be running in the background. That said, the perf win is consistent across all projects, with 15-20% win in wallclock time and around 25% win in total CPU time, ~9% win in sys time, and ~25% fewer minor allocations, and ~5-10% fewer overall allocations. This is only for the backend; the capture is by and large unaffected (either the same or a tad faster within noise range).
Here are the results running on OpenSSL 1.0.2d on osx (12 cores, 32G RAM)
=== base
infer binary: 26193088 bytes
compile time: 40s
capture:
```lang=text
real 1m7.513s
user 3m11.437s
sys 0m55.236s
```
analysis:
```lang=text
real 5m41.580s
user 61m37.855s
sys 1m12.870s
```
Memory profile:
```lang=json
{
...
"minor_gb": 0.1534719169139862,
"promoted_gb": 0.0038930922746658325,
"major_gb": 0.4546157643198967,
"allocated_gb": 0.6041945889592171,
"minor_collections": 78,
"major_collections": 23,
"compactions": 7,
"top_heap_gb": 0.07388687133789062,
"stack_kb": 0.3984375,
"minor_heap_kb": 8192.0,
...
}
```
=== flambda with stock options (no `-Oclassic`, just the same flags as base)
Exactly the same as base.
=== flambda `-O3`
infer binary: 56870376 bytes (2.17x bigger)
compile time: 191s (4.78x slower)
capture is the same as base:
```lang=text
real 1m9.203s
user 3m12.242s
sys 0m58.905s
```
analysis is ~20% wallclock time faster, ~25% CPU time faster:
```lang=text
real 4m32.656s
user 46m43.987s
sys 1m2.424s
```
memory usage is a bit lower too:
```lang=json
{
...
"minor_gb": 0.11583046615123749, // 75% of previous
"promoted_gb": 0.00363825261592865, // 93% of previous
"major_gb": 0.45415670424699783, // about same
"allocated_gb": 0.5663489177823067, // 94% of previous
"minor_collections": 73,
"major_collections": 22,
"compactions": 7,
"top_heap_gb": 0.07165145874023438,
"stack_kb": 0.3359375,
"minor_heap_kb": 8192.0,
...
}
```
=== flambda `-O2`
Not nearly as exciting as `-O3`, but the compilation cost is still quite high:
infer: 37826856 bytes
compilation of infer: 100s
Capture and analysis timings are mostly the same as base.
Reviewed By: jberdine
Differential Revision: D4867979
fbshipit-source-id: 99230b7
Summary: This will run infer with `--no-keep-going` by default in our tests.
Reviewed By: sblackshear
Differential Revision: D5814237
fbshipit-source-id: c1e1a4e
Summary:
This gets rid of the horrible hack of asking jbuilder to build
_build/{default,test}/.ppx/ppx_compare/ppx.exe prior to starting several
jbuilds in parallel. We now refrain from starting several jbuilds in parallel.
Also, I finally understood that order-only deps do nothing for phony targets,
and not much else for non-phony ones. I hate make even more.
Reviewed By: jberdine
Differential Revision: D5678699
fbshipit-source-id: 52179e8
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary: This takes several seconds and is better tested in parallel with the other tests instead of at the end.
Reviewed By: mbouaziz
Differential Revision: D5591774
fbshipit-source-id: f474cae
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary:
Do not use the deprecated (and slower) `#infer` flavor. Instead, `infer-run`
runs capture with the `#infer-capture-all` flavor, followed by merging targets,
followed by the analysis.
Move the call to `MergeCapture` around to make this change easier.
Reviewed By: mbouaziz
Differential Revision: D5547199
fbshipit-source-id: 53c9996
Summary: Define `default` target at the very top of the Makefile to make sure some other target doesn't replace it, as was done accidentally in D5498555
Reviewed By: martinoluca
Differential Revision: D5536691
fbshipit-source-id: 7398ec0
Summary:
Cosmetic changes to the output of `make clean` and `make test-replace`.
Run the inferTraceBugs tests from tests/build_systems/ like other such e2e
tests, so that they can run in parallel with other tests instead of
sequentially at the end.
Reviewed By: dulmarod
Differential Revision: D5526599
fbshipit-source-id: 57231bd
Summary:
Pretty basic: warn when we see an assignment instruction `x = ...` and `x` is not live in the post of the instruction.
Only enabled for Clang at the moment because linters already warn on this for Java. But we can enable it later if we want to (should be fully generic).
Reviewed By: jeremydubreil
Differential Revision: D5450439
fbshipit-source-id: 693514c
Summary:
Fixes 2 issues with the build:
- The OCaml dependencies (Version.ml, atdgen-generated stuff, ...) would be generated twice when running `make -j test` from a clean tree, because `make` has no inter-Makefile visibility over common dependencies.
- We would run `atdgen` twice: once for the .ml, once for the .mli, even though one invocation is enough for both.
Add `make ocaml_clean` to nuke only the OCaml code (in particular because
rebuilding the C++ code in the plugin is slow when all I want to get rid of the
OCaml stuff).
Reviewed By: mbouaziz
Differential Revision: D5415318
fbshipit-source-id: 16f42c6
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Jules Villard
Jeremy Dubreil
Josh Berdine
Dino Distefano
Sam Blackshear
Dulma Churchill