Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary:
Record the db schema, infer version, and run dates into
infer-out/.infer_runstate.json. This allows us to check on startup whether the
results directory was generated using a compatible version of infer or not, and
give a better error message in the latter case than some SQLite error about
mismatching tables.
This will be used in a follow-up diff to record capture phases too, and avoid
relying on filesystem timestamps of the infer-out/capture/foo/ directories for
reactive analysis.
Had to change some tests Makefiles to make sure they do not attempt to re-use
stale infer-out directories, which would now fail the run.
The stale infer-out directory gets deleted if `--force-delete-results-dir` is
passed (but a warning still gets printed).
Reviewed By: mbouaziz
Differential Revision: D6760787
fbshipit-source-id: f36f7df
Summary:
Horrible but somewhat-documented hack to get inter-file dead code analysis for
the OCaml code.
Reviewed By: mbouaziz
Differential Revision: D6724234
fbshipit-source-id: 3a5b9cd
Summary:
No need for our own patched version now that it's available in opam.
You should `opam pin remove --no-action javalib && ./build-infer.sh` to get rid of the previous version.
Reviewed By: mbouaziz
Differential Revision: D6063730
fbshipit-source-id: 8efd598
Summary:
Installing with `opam pin` risks upgrading a lot of package in the current
switch, which is very slow. It's also wasted work since we'll install back
their older versions afterwards with `opam lock`. Moreover, that second step
can now fail if javalib needs to be recompiled (which it seems it does),
because we delete the javalib sources after having pinned them.
Solution: 1. do not install javalib at `opam pin` time, and 2. do not remove its source tree after pinning.
Reviewed By: martinoluca
Differential Revision: D5764153
fbshipit-source-id: 9c9b1c7
Summary:
This gets rid of the horrible hack of asking jbuilder to build
_build/{default,test}/.ppx/ppx_compare/ppx.exe prior to starting several
jbuilds in parallel. We now refrain from starting several jbuilds in parallel.
Also, I finally understood that order-only deps do nothing for phony targets,
and not much else for non-phony ones. I hate make even more.
Reviewed By: jberdine
Differential Revision: D5678699
fbshipit-source-id: 52179e8
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary: This change introduces the a new argument that lets you restrict the results of a differential report to only certain files.
Reviewed By: mbouaziz
Differential Revision: D5236626
fbshipit-source-id: 52711e9
Summary:
It's easier to distinguish what's checked into infer and what comes from the
plugin this way.
Reviewed By: akotulski
Differential Revision: D5191581
fbshipit-source-id: 579311e
Summary:
Spacetime profiling showed that this was allocating a lot more than it needs
to. Switching to a `Hashtbl` makes the memory overhead go away, and halves the
memory consumption of the whole frontend on some pathological files.
This also brings the file "clang_ast_main.ml" into the infer repo, renamed to
"ClangPointers.ml" (and given an mli). It's useful to have something like
"clang_ast_main.ml" checked into the facebook-clang-plugins repo to illustrate
how to use the OCaml AST visitor generated by atdgen, but it can be simplified
to be more pedagogical instead of being the visitor used in infer.
Reviewed By: jberdine
Differential Revision: D4884383
fbshipit-source-id: 88f324a
Summary:
Recently we changed the binaries we build and use but it wasn't obvious that
some of the old binaries disappeared. For instance, nothing short of `git clean
-xfd` would get rid of "infer/bin/InferPrint", which can lead to frustrating
attempts to make InferPrint not segfault.
Mitigate this in two ways:
- be more strict in the binaries we ignore in .gitignore, so InferPrint would should up in "git status"
- be less strict in the binaries we clean out with `make clean` so that
InferPrint et al. gets deleted by `make clean`
Reviewed By: jberdine
Differential Revision: D5120573
fbshipit-source-id: 44e7954
Summary: This will be needed to generate man pages with an accurate date.
Reviewed By: jberdine, mbouaziz
Differential Revision: D4937498
fbshipit-source-id: b5ebd31
Summary:
We won't be needing to know the terminal size when we move the help to
manpages. Hopefully if we need C stubs again in the future we can refer back to
this diff to revive them.
Reviewed By: jberdine
Differential Revision: D4937491
fbshipit-source-id: 99139fa
Summary:
This enables the following workflow:
```
$ ./build-infer.sh
[...]
$ opam upgrade # takes infer dependencies into account
```
To do so, we install a temporary `infer-deps-XXXX` package as before (the temp
name is because opam thinks there's nothing to do otherwise), then we install
an `infer-deps` package permanently.
Reviewed By: mbouaziz
Differential Revision: D4867195
fbshipit-source-id: da806f9
Summary:
Nuking the specs then building the models was not a great idea: the models do
not look at specs but only at some dummy marker files, eg
infer/lib/specs/c_models, so they don't necessarily realize that they need to
be rebuilt when the specs have been nuked!
One easy workaround would be to also delete the marker files, but then we would
*always* rebuild the models when building infer. Not good.
The solution here is to nuke the specs and marker files only when the clang
dependencies change, then rebuild all the models.
Reviewed By: jberdine, jeremydubreil
Differential Revision: D4781424
fbshipit-source-id: 2d2606e
Summary:
This directory is created to trick opam into installing our dependencies even
if opam thinks it already did the job. If the user interrupts the build then
this directory can be left lingering around.
Reviewed By: mbouaziz
Differential Revision: D4779132
fbshipit-source-id: e47581a
Summary:
This removes the dependency of libffi, and gives better guarantees at
compile-time. A bit overkill to retrieve the width of the terminal but what do
you know...
Reviewed By: jberdine
Differential Revision: D4700003
fbshipit-source-id: 036989b
Summary:
There is no point in attaching plugin to `clang -E` calls since they don't produce any AST.
Same applies to `-M`, `-MM`, etc. (but not `-MD` nor `-MMD`).
Reviewed By: jvillard
Differential Revision: D4681618
fbshipit-source-id: 7a76add
Summary: We had our own mechanism for saving `./configure` flags, which does not work if flags contain whitespace. It turns out that `./config.stats --config` is a thing though.
Reviewed By: mbouaziz
Differential Revision: D4642422
fbshipit-source-id: ae075ca
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
Xcode's compilation databases follows a different convention than cmake's and
escape the `"file"` and `"dir"` fields of each unit to make them shell-ready.
We need to treat them differently when reading them.
This adds a new `--clang-compilation-db-files-escaped` option and makes the
code related to reading compilation databases deal correctly with both
conventions.
Reviewed By: akotulski
Differential Revision: D4559239
fbshipit-source-id: 51120ae
Summary: Some compilation databases give relatives paths for the `"file"` field. This is not ambiguous as there is also a `"dir"` field, so use that to make the path absolute when needed.
Reviewed By: dulmarod
Differential Revision: D4559145
fbshipit-source-id: be36a16
Summary:
Some of the new thread-safety annotations are somewhat difficult to understand based on the name alone.
Devs can link a sources JAR with the annotations in their IDE to quickly understand the purpose of each annotation.
Reviewed By: jeremydubreil
Differential Revision: D4451748
fbshipit-source-id: 1ba6060
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
This will make it easier to bisect on top of this commit, as values in
Makefile.autoconf.in are not expected to change across commits, but
Makefile.config may fluctuate.
This should also make it easier to rebase stacks of diffs without having
to rerun `./autogen.sh && ./configure`.
Reviewed By: jberdine
Differential Revision: D4410077
fbshipit-source-id: 1119fb6
Summary:
`make byte` will populate infer/bin/ with bytecode version of each executable,
plus infer/bin/infer.byte (used to remember which of the native or byte
executables have been built most recently). `make infer` now also creates
infer/bin/infer.native, so that we're sure to replace the executables with
native/byte versions as appropriate.
This is to make debugging a tad easier:
make byte
ledit ocamldebug $(which infer) <infer args>
Whereas previously one had to:
make -C infer/src byte
ledit ocamldebug infer/_build/infer/backend/infer.byte <infer args>
Reviewed By: jberdine
Differential Revision: D4409476
fbshipit-source-id: ab5f57d
Summary:
Adding #infer-capture-all et al. by hand is annoying and I always forget to do
it. Let infer figure that out.
Reviewed By: dulmarod
Differential Revision: D4339799
fbshipit-source-id: 55e52dc
Summary:
SuppressWarnings annotations are hardly used and add considerable
complexity due to requiring recompilation with an annotation processor.
Reviewed By: jvillard
Differential Revision: D4312193
fbshipit-source-id: c4fc07e
Summary:
The debug script wants to run InferClang on the file at hand, but that often
involves running a -cc1 command with InferClang, which is no longer supported.
This removes this functionality. The debug script now only dumps the AST to
biniou and its text representation.
Reviewed By: dulmarod
Differential Revision: D4319431
fbshipit-source-id: ef64912
Summary:
This removes support for developing infer using Eclipse. If you use Eclipse,
consider using Atom/Emacs/vim instead, which have good OCaml/Reason support.
This allows us to get rid of a couple quirks:
- do not generated ocaml annots (this is very slow)
- move OCaml _build directory to infer/src/ where it makes more sense
Reviewed By: jberdine
Differential Revision: D4319480
fbshipit-source-id: 6f063fc
Summary:
Instead of the custom filtering done by `InferPrint --issues-tests`, use the
filtering done by `infer` and run without filtering for our e2e tests. We still
test the filtering for our build systems integration tests, and this diff
restores that behaviour for the ant test (hence the bugs removed from
ant/issues.exp).
Also add internal exceptions to most tests to get more signal out of them (eg,
knowing when we add assertion failures and the like).
Retire the old `--issues-tests` to limit the number of ways we do filtering.
Reviewed By: jeremydubreil
Differential Revision: D4131308
fbshipit-source-id: 35805cc
Summary:
This makes the tests depend on much fewer phony targets, thus reducing the need
to rerun the tests when nothing has changed.
Reviewed By: jberdine
Differential Revision: D4118457
fbshipit-source-id: 664b6e3
Summary:
InferClang knows what to do if its name ends in ++. So it is not
necessary to pass whether or not the original clang executable ended in
++ to InferClang using the the INFER_XX environment variable. Instead,
create an InferClang++ symbolic link and make the clang wrapper call
either InferClang or InferClang++ as needed.
Reviewed By: jvillard
Differential Revision: D4078416
fbshipit-source-id: 3b5d5d0
Summary:
This diff revises the makefiles for java tests so that they are based on
the files actually produced and depended on, instead of the existing
imperative style. This is, I think, clearer and easier to modify, and
enables a little more parallelism.
Reviewed By: jvillard
Differential Revision: D4072560
fbshipit-source-id: c16d4bd
Summary:
This also adds `-a compile` support to `InferClang`. This is needed for the
`xcodebuild` integration, which is hard to fold into the same binary as the
rest.
Reviewed By: jberdine
Differential Revision: D4008262
fbshipit-source-id: 0bbd53f
Summary:
There's no reason for infer to be in lib/ anymore, move it to the same place as
the other binaries. Thus all binaries are in the same directory and Config.ml
can better know where things are.
Reviewed By: jberdine
Differential Revision: D4015958
fbshipit-source-id: c5e851f
Summary:
Move most of common dependencies out of backend/ into base/
Diff doesn't change any code and hence files in base/ may still depend on
code outside of base/. There will be followup diff cleaning those up.
There are also files that maybe should be in common/ but haven't been moved there yet.
Reviewed By: jberdine
Differential Revision: D3950695
fbshipit-source-id: 00612b1
Summary: Make it possible to run infer code from within `ocaml`/`utop`. Integration is really basic, but we can extend it if we find it useful.
Reviewed By: jberdine
Differential Revision: D3736029
fbshipit-source-id: 4cebb7c
Summary:
Generation of the module dependency graph was broken (all IR modules
were omitted) by the reason conversion.
Reviewed By: cristianoc
Differential Revision: D3541395
fbshipit-source-id: e5af125
Summary:
This diff changes the toplevel 'infer' executable from the current
python script to an OCaml binary. Currently this executable only parses
command line arguments, sets up environment variables, and invokes the
existing python script. This improves infer's command-line and
configuration interface, since passing arguments to the frontends or
backend no longer requires manually setting environment variables, and
arguments for the toplevel can now also be specified in .inferconfig.
Simplification and migration of functionality from the python script is
left for the future.
Reviewed By: martinoluca, jvillard
Differential Revision: D3450662
fbshipit-source-id: 1b52302
Summary:
Hardcoding `variable@` in Makefiles is Bad™ because it prevents the users from
overwriting them easily with `make variable="my custom value"`. The right way
to do it is thus:
```
variable = variable@
# then use $(variable) everywhere
```
This diff puts all the `variable = variable@` lines in Makefile.config.in, and
changes every occurrence of a `variable@` to `$(variable)` everywhere else.
I mostly automated generating this diff. Here are the steps I did:
- find out which `variable@`s we use:
find . -name 'Makefile*' -exec grep -e '@[^@ []\+@' -o -h \{\} \+ | sort | uniq > config_variables
- write this `replace.sh` script to replace every `variable@` with `$(variable)`:
```
#!/bin/sh
config_vars_file=$1
shift
for line in $(cat $config_vars_file); do
var=$(echo $line | tr -d @)
sed -i -e "s/$line/\$($var)/g" $@ > /dev/null
done
```
- run the script as such:
find . -name 'Makefile.*in' \( -not -wholename './Makefile.config.in' \) -exec ./replace.sh config_variables \{\} \+
- put all the `VARIABLE = VARIABLE@` lines in Makefile.config.in
- move all `Makefile.in` to `Makefile`, since they don't need to be generated by `./configure` anymore:
```
for i in $(find . -name 'Makefile.*in' \( -not -wholename './Makefile.config.in' \)); do \
rm $(dirname $i)/$(basename $i .in) && git mv $i $(dirname $i)/$(basename $i .in) ; \
done
```
- delete all Makefile except Makefile.config from configure.ac
- manually inspect and remove remaining instances of `VAR = $(VAR)` in makefiles, looking at the output of `git grep '^\(\w\+\) = $(\1)'`
Reviewed By: jberdine
Differential Revision: D3358379
fbshipit-source-id: 5d37f02
Summary:
This change introduces a new binary, called `InferStatsAggregator`, that once invoked, aggregates
together all the stats generated by the single invocations of frontend/backend/reporting, that can
be used for performance measurements.
Reviewed By: jvillard
Differential Revision: D3317000
fbshipit-source-id: 61ec615
Summary: This is basically not used and removing it makes the Makefiles slightly less convoluted.
Reviewed By: jberdine
Differential Revision: D3322376
fbshipit-source-id: 2d7c1f8
Summary:
Build everything at once all the time. This removes the need for multiple
directories, which were a hassle to begin with.
This removes the `java`, `clang`, and `llvm` targets in various Makefiles as
well.
Reviewed By: jberdine
Differential Revision: D3317230
fbshipit-source-id: 8e86140
Summary:public
This extends infer/src/Makefile with a mod_dep.dot target that builds a
dot graph of module dependencies.
This also adds ocamldot, which is in the public domain and available
from http://trevorjim.com/projects/ocamldot/ocamldot.tar .
Reviewed By: cristianoc
Differential Revision: D3168488
fb-gh-sync-id: 267fb0e
fbshipit-source-id: 267fb0e
Summary:public
This is needed to have a working `opam install infer`. Actual working `opam
install infer` in a follow-up diff.
Reviewed By: jberdine
Differential Revision: D3109308
fb-gh-sync-id: 49d7276
fbshipit-source-id: 49d7276
Summary:
public
These files are not supposed to be kept around - while it's convenient to not see them,
they are polluting infer directory and hard to get rid of.
Reviewed By: martinoluca
Differential Revision: D2895610
fb-gh-sync-id: c12a333
Summary:
public
Use the autotools to generate some of the info used in infer/src/Makefile.
Reviewed By: jeremydubreil
Differential Revision: D2703752
fb-gh-sync-id: 59090b2
Summary:
public
Use autoconf's detection of xcode-select to decide whether to build the ObjC
models or not.
Reviewed By: jeremydubreil
Differential Revision: D2703864
fb-gh-sync-id: e6dadca
Summary:
public
Generate infer/Makefile from infer/Makefile.in to use make from autoconf.
Reviewed By: jeremydubreil
Differential Revision: D2703102
fb-gh-sync-id: ee22395
Summary:
public
Create Makefile.config.in to hold paths to various source directories used
in infer/annotations/Makefile.
Reviewed By: jeremydubreil
Differential Revision: D2702986
fb-gh-sync-id: b5eb5bf
Summary:
public
For now, the script only checks that the ocaml dependencies are present.
Reviewed By: meyering
Differential Revision: D2702956
fb-gh-sync-id: 6945b63
Summary:
Use the new clang plugin that outputs biniou instead of Yojson. This binary format is more compact, which makes the frontend a little faster (5 to 10%).
@update-submodule: facebook-clang-plugins
Summary:
This adds support for having lookup from pointer to decl in C frontend
NOTE: with this diff atdgen 1.6 or later is required.
To upgrade atdgen, please run `opam install atdgen.1.6.0`
Summary:
@public
release tarballs generated by our scripts should be ignored.
Test Plan:
put all the tarballs in infer/ (sources, osx, linux), git status doesn't show
them.
Jules Villard
Martino Luca
Josh Berdine
Andrzej Kotulski
Sam Blackshear
Dulma Churchill
Yunxing Dai
Lázaro Clapp Jiménez Labora
Cristiano Calcagno
jrm
Open Source Synchronization