Summary:
Fix a bug where the actual return variable was not scoped correctly in
cases where its name clashed with a local or formal of the
callee. Also comment and simplify to attempt to make more
understandable.
Reviewed By: bennostein
Differential Revision: D17801944
fbshipit-source-id: 286739241
Summary:
Some code that is otherwise benignly scalar still uses the
ExtractElement and InsertElement vector operations, so translate them
as if they were array operations.
Reviewed By: ngorogiannis
Differential Revision: D17801949
fbshipit-source-id: 89f3666bd
Summary:
Previously, the LLVM semantics could be stuck where the LLAIR semantics
was not yet stuck, but would become stuck (at the same place) after
taking a step. This was due to LLVM using the traditional definition of
stuck states: any state from which there are no transitions. However,
LLAIR cannot do that because it might get stuck in the middle of a block
that contains several visible stores. We don't want to consider the
whole block stuck, nor can we finish it. Thus, the LLAIR definition of
stuckness is when the state has the stuck flag set which happens when
stopping in the middle of a block after encountering a stuck
instruction. Now LLVM takes the same approach.
Reviewed By: jberdine
Differential Revision: D17855085
fbshipit-source-id: a094d25d5
Summary:
Add an argument to the Exit instruction. Update the LLVM semantics to
execute the Exit instruction and store the result in an "exited"
component of the state. (Previously it just noticed that it was stuck
about to do an Exit.)
With exiting treated uniformly, now in the proof that for every LLVM
trace, there is a llair trace that simulates it, all of the cheats
except for 1 are just cases that I haven't got to yet. However, the last
cheat is for the situation where the LLVM program gets stuck and the
llair program doesn't. For example, the following two line LLVM program
gets stuck because r2 is not assigned (ignoring for the moment the static
restriction that LLVM is in SSA form).
r1 := r2
Exit(0)
The compilation to llair omits the assignment and so we get a llair
program that doesn't get stuck:
Exit(0)
The key question is whether the static restrictions are sufficient to
ensure that no expression that might be omitted can get stuck.
Reviewed By: jberdine
Differential Revision: D17737589
fbshipit-source-id: bc6c01a1b
Summary:
If the LLVM to llair translation keeps a mapping from register r to
expression e, then for each register r' mentioned in e, there must be an
assignment to r' that dominates the entire live range of r. Thus, where
ever r might be replaced by e, the value of r' will be the same as it
was when the initial assignment to r occurred. Maintaining this
invariant relies on the LLVM being in SSA form.
Reviewed By: jberdine
Differential Revision: D17710288
fbshipit-source-id: fd3eaa57d
Summary:
This is work in progress; many of the cheats aren't true. In particular,
the definition of stuck/complete/partial traces in LLVM and llair don't
quite match up and need some modification. Also, the state relation
isn't strong enough; it will need to include information about registers
used in the expressions of the LLVM register to llair expression
mapping. But the overall shape of the proof is ok and so it can be
used to poke at various local aspects of the translation, such as
individual instructions.
Reviewed By: jberdine
Differential Revision: D17631604
fbshipit-source-id: 743b5d64d
Summary:
By some unfortunate logic, OCaml often decides to use
`sexp_list`/`sexp_option` instead of just `list`/`option`. Sometimes
these get copy/pasted in interface files.
It would be good to tell OCaml not to do that in the first place but in
the meantime: this diff.
Reviewed By: ngorogiannis
Differential Revision: D17907938
fbshipit-source-id: 7546834a2
Summary:
For test scripting purposes, when the analysis finishes successfully,
report the number of alarms.
Reviewed By: ngorogiannis
Differential Revision: D17801947
fbshipit-source-id: 1660866df
Summary:
In a spec, it currently may be that foot.us does not contain xs. So
exec_specs needs to extend the vocabulary of foot before existentially
quantifying out xs.
Reviewed By: ngorogiannis
Differential Revision: D17801933
fbshipit-source-id: 7b4b9262a
Summary:
Previously it was added to the locals before calling Dom.call, but
this results in the scope of freturn ending too early.
Reviewed By: ngorogiannis
Differential Revision: D17801939
fbshipit-source-id: 739ec8981
Summary:
Some globals have 'appending' linkage, where linking modules results
in appending the arrays from each module. These can appear even when
empty, leading to useless and somewhat troublesome 0-length arrays. So
drop them.
Reviewed By: ngorogiannis
Differential Revision: D17801927
fbshipit-source-id: d2dc180d7
Summary:
While BitCasts are the identity function on the bitwise
representation, they are not necessarily so in the semantics or the
logical representation. So be more conservative about eliding them in
the Exp language. Those that are actually semantic identities are
still omitted in the Term language.
Reviewed By: ngorogiannis
Differential Revision: D17801950
fbshipit-source-id: bf9ae57b5
Summary:
The analyzer (currently) hard-codes some assumptions about sizes of
basic types such as Typ.bool, Typ.siz, etc. Check that these
assumptions are satisfied by the input llvm datalayout, and give
reasonable error messages otherwise.
Reviewed By: ngorogiannis
Differential Revision: D17801941
fbshipit-source-id: 4fe484ee0
Summary:
Now that expression types and type sizes can be computed, it is not
necessary to store the sizes of globals separately.
Reviewed By: ngorogiannis
Differential Revision: D17801932
fbshipit-source-id: f746e506b
Summary:
- The `Llvm_target.DataLayout.size_in_bits` needs to be used for checking casts
e.g. it is ok to `bitcast <16 x i1> to i16`: they both have 16 bits, but they have sizes 16 vs 2 bytes
- The `Llvm_target.DataLayout.abi_size` needs to be used for the size of memory blocks containing values
e.g. for the size of memory segments containing the initial values of globals
- The example above shows that we can't compute the byte size from the bit size without knowing the target specific datalayout
- So we need both in each sized type
- Also add checks that Convert exps and terms are not no-ops
- Simplifications of size manipulating code
Reviewed By: ngorogiannis
Differential Revision: D17801928
fbshipit-source-id: 8c8ce6128
Summary:
In order to type-check casts, it is necessary to have the size of each
sized type. This size information is also useful in a few other places.
Reviewed By: bennostein
Differential Revision: D17801931
fbshipit-source-id: f8ef53276
Summary:
This is needed since expressions distinguish between the integer or
pointer zero value and zero-initialized array/tuple/struct aggregates
based on type, and the backend distinguishes them semantically.
Reviewed By: bennostein
Differential Revision: D17801938
fbshipit-source-id: ac8665e65
Summary:
Linking can lead to opaque types becoming identified with a known
types. Assertions in various places that types should be sized can be
triggered by such opaque types. Until there is a distinction between
processing fully-linked versus incomplete code, these checks need to
be relaxed to permit opaque types where sized ones are expected.
Reviewed By: bennostein
Differential Revision: D17801929
fbshipit-source-id: c5e62f7c8
Summary: Integer terms need to compare higher than any monomial.
Reviewed By: bennostein
Differential Revision: D17725607
fbshipit-source-id: c64fd52d5
Summary:
Also weaken definition of Typ.castable to permit casting between
floats and ints of the same size.
Reviewed By: bennostein
Differential Revision: D17725611
fbshipit-source-id: 5e8114e26
Summary:
Typ.equivalent is currently defined the same as Typ.castable, but
conceptually they are different and castable needs to be
weakened. They are different since for example it is possible to cast
from an i64 to a f64, but those types denote different sets of values
in the semantics, and the bitcast is modeled using a conversion
function.
Reviewed By: bennostein
Differential Revision: D17725615
fbshipit-source-id: 973574f2a
Summary:
For function calls where the callee is a cast expression, previous the
wrong type would be used for the callee. This could lead to crashes in
llvm, or asserting in sledge.
Reviewed By: bennostein
Differential Revision: D17725610
fbshipit-source-id: 938b49a49
Summary:
Some called functions are represented in llvm as a global variable
with e.g. external linkage, and so they do not appear as
'functions'. It is still valid to call such functions, though the
analyzer does not know their definitions.
Reviewed By: bennostein
Differential Revision: D17725609
fbshipit-source-id: 333d19c0d
Summary:
Improve Trace.fail to log the error and raise informative exceptions.
Eliminate the confusion between Import.fail and Trace.fail by removing
Import.fail.
Reviewed By: bennostein
Differential Revision: D17725608
fbshipit-source-id: 79fdfbd86
Summary:
By default all functions except those specified as entry points in the
config file are "internalized". Internal functions are removed if they
are not called. It is sometimes necessary to disable internalization,
e.g. to analyze the llvm tests.
Reviewed By: bennostein
Differential Revision: D17725614
fbshipit-source-id: 4b13501f5
Summary:
Sometimes the models for the C/C++ runtime and standard libraries are
not needed. Furthermore, sometimes, e.g. when analyzing llvm tests,
trying to link them fails.
Reviewed By: bennostein
Differential Revision: D17725616
fbshipit-source-id: 76a4bcf90
Summary:
The `(t, unit) result` type is no more informative than `t option` and
less convenient.
Reviewed By: bennostein
Differential Revision: D17665244
fbshipit-source-id: fa969d8b7
Summary:
This puts the mediation between Exp and Term together in Sh_domain
rather than being spread across the two.
Reviewed By: bennostein
Differential Revision: D17665235
fbshipit-source-id: edf277d45
Summary:
The move instruction takes a vector of assignments to perform in
parallel, so generalize exec_move from one to a vector.
Reviewed By: bennostein
Differential Revision: D17665248
fbshipit-source-id: 52aae5ff9
Summary:
Extend the encoding using `id` from 0 indicating a program variable to
also -1 indicating a global program variable.
Reviewed By: bennostein
Differential Revision: D17665229
fbshipit-source-id: 848b8a31e
Josh Berdine
Scott Owens
Jules Villard