Summary:
Next step in moving logic from make to dune. Since dune understands
build rules with multiple targets we don't need to introduce
artificial pipelining as in make. Rules are pretty straightforward,
albeit somewhat verbose.
The tricky part here was adjusting deadcode detection.
Reviewed By: jvillard
Differential Revision: D20322605
fbshipit-source-id: 688e5f96f
Summary:
Main changes are:
1. Dune can promote targets into the source tree as a part of build. This
allows us to **remove custom promotion/installation logic in src/Makefile**.
2. Dune promotion only works for path within workspace. This required
**moving dune-workspace one folder up**: from infer/infer/src to infer/infer.
But this is not bad, since it makes it possible to migrate tests under dune at some point.
3. `checkCopyright` now also promoted into `infer/infer/bin` instead of
`infer/scripts` partly for consistency and partly because of the
dune-workspace location.
4. `byte` mode was replaced with `byte_complete`. The latter takes
similar amount of time to build compared to `byte`, but produces
standalone binaries that don't require InferCStubs to be
installed. This allowed to remove `dune_exec_shim` and custom logic
around `dune build InferCStubs.install` when dealing with byte
targets.
All in all, `infer/src/Makefile` is not about 2/3 its previous size
with less custom logic in Makefiles/scripts and more encoded in dune
build files.
Reviewed By: jvillard
Differential Revision: D20303902
fbshipit-source-id: 9e4c65bd0
Summary:
With the introduction of environments and profiles we no longer need
to generate most dune files in libraries via make. Also, those dune
builds don't need to be in OCaml.
In addition to converting build files to plain sexp definitions, this
patch also:
- Adjusts copyrightCheck to work correctly with sexp-based dune files.
- Adds auto-formatting for sexp-based dune files.
Reviewed By: jvillard
Differential Revision: D20250208
fbshipit-source-id: 495aeaa99
Summary: With plain/sexp dune files we need to support lisp style comments in checkCopyright
Reviewed By: jvillard
Differential Revision: D20366314
fbshipit-source-id: 04db9e3c1
Summary:
With profiles and `(env ...)` stanza it's possible to consolidate
various ocamlc/ocamlopt/etc setups in a single place.
Where previously we needed to append `dune.common` to every dune file
and specify `flags` and `ocamlopt_flags` now the flags are specified
in `env` and applied accross the board.
This allows to
1. simplify build definitions,
2. avoid the need to generate dune files,
3. use plain sexps instead of OCaml and JBuilder plugin in build
files.
(I'll try to address 2 and 3 in the followup patches).
Existing `make` targets should continue working as before. Also, we
can use dune CLI like so:
```
infer/src$ dune printenv --profile opt # <- very useful for introspection
infer/src$ dune build check
infer/src$ dune build check --profile test
infer/src$ dune build infer.exe --profile dev
infer/src$ dune build infer.exe --profile opt
```
Also, with just 1 context something like `dune runtest` will run unit
tests only once instead of N times, where N is the number of contexts.
Now, there's one difference compared to the previous setup with
contexts:
- Previously, each context had its own build folder, and building infer
in opt context didn't invalidate any of the build artifacts in default
context. Therefore, alternating between `make` and `make opt` had low
overhead at the expense of having N copies of all build artifacts (1
for every context).
- Now, there's just 1 build folder and switching between profiles does
invalidate some artifacts (but not all) and rebuild takes a bit more
time.
So, if you're alternating like crazy between profiles your experience
may get worse (but not necessarily, more on that below). If you want
to trigger an opt build occasionally, you shouldn't notice much
difference.
For those who are concerned about slower build times when alternating
between different build profiles, there's a solution: [dune
cache](https://dune.readthedocs.io/en/stable/caching.html).
You can enable it by creating a file `~/.config/dune/config` with the
following contents:
```
(lang dune 2.0)
(cache enabled)
```
With cache enabled switching between different build profiles (but
also branches and commits) has ~0 overhead.
Dune cache works fine on Linux, but unfortunately there are [certain
problems with
MacOS](https://github.com/ocaml/dune/issues/3233) (hopefully, those
will be fixed soon and then there will be no downsides to using
profiles compared to contexts for our case).
Reviewed By: jvillard
Differential Revision: D20247864
fbshipit-source-id: 5f8afa0db
Summary:
What was happening in that case is that a .inferconfig file containing `{ "myflag":
false }` used to be translated by CommandLineOption as `--no-` (`--no-<long>`),
because it picked the *non-deprecated* form of the option (here `myflag` would
have to be a deprecated form of the option since its non-deprecated form is
empty `""`). Instead, pick a non-empty form of the option.
Reviewed By: jberdine
Differential Revision: D20368784
fbshipit-source-id: 8e761e684
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary: Just for fun, and because killing InferPrint.ml is just so satisfying.
Reviewed By: ngorogiannis
Differential Revision: D20362643
fbshipit-source-id: 039cfec61
Summary:
Now that this module only prints report.json and costs_report.json, we
can dis-entangle the whole callback spaghetti.
Reviewed By: ngorogiannis
Differential Revision: D20362640
fbshipit-source-id: 56ffa4e08
Summary:
At this point in the stack, here's what's left in InferPrint.ml:
1. how to output report.json and costs_report.json
2. how to print summaries from the command line (`infer report`)
3. how to print --issues-tests stuff (`infer report --issues-tests`)
Keep only 1. in there. 2. goes to SpecsFiles.ml directly from infer.ml,
and 3. goes to its own module (also the fields to output in
--issues-tests get a non-poly variant).
1. does some extra stuff sometimes, eg in test-determinator mode. Keep
this for now.
Reviewed By: ngorogiannis
Differential Revision: D20362642
fbshipit-source-id: 0d9f0e8e2
Summary:
Make <infer-out>/report.json the default value for this option, as this
is what is used 99% of the time. Clean up test options using this.
Reviewed By: ngorogiannis
Differential Revision: D20362644
fbshipit-source-id: a1bb18757
Summary:
InferPrint hasn't been in charge of writing bugs.txt since forever.
This will be re-implemented as a post-processing of report.json instead
(like it is now, but in OCaml instead of python).
Reviewed By: ngorogiannis
Differential Revision: D20362641
fbshipit-source-id: 83d8cb53d
Summary:
I don't think anyone uses this. Meta-goal: cleaning up InferPrint.ml.
Measuring stats about summaries is good in principle, but we should do
it somewhere else instead of in the InferPrint callback hell. For
instance when we record each summary. Meanwhile, delete this.
Reviewed By: ngorogiannis
Differential Revision: D20362639
fbshipit-source-id: c73d431a5
Summary:
Move definitions of profiles from `dune-workspace` to `dune` since it
seems to be ok to use profiles in `dune-workspace` that are only
defined in `dune`. Since the `dune` but not `dune-workspace` file is
used when building as a vendored dependency, this seems to be
preferable.
Also, change the `opt` profile into a wildcard, which seems to be
preferable from the vendored-building perspective.
Also, set library public names such that including `sledge` in the
`libraries` phrase of `dune` files works.
Reviewed By: ngorogiannis
Differential Revision: D20376179
fbshipit-source-id: f2b634716
Summary:
Adding a model for malloc: we add an attribute "Allocated". This can be used for implementing memory leaks: whenever the variables get out of scope, we can check that if the variable has an attribute Allocated, it also has an attribute Invalid CFree.
Possibly we will need more details in the Allocated attribute, to know if it's malloc, or other allocation function, but we can add that later when we know how it should look like.
Reviewed By: jvillard
Differential Revision: D20364541
fbshipit-source-id: 5e667a8c3
Summary:
This is not a full cleanup, but it is better than nothing.
At least `callback2` won't trigger me each time I see it anymore.
Reviewed By: jvillard
Differential Revision: D20364812
fbshipit-source-id: 8f25c24ad
Summary:
clean up dependencies by using apt addon rather than `sudo apt`. This should make it easier to re-add osx support later.
Pull Request resolved: https://github.com/facebook/infer/pull/1235
Differential Revision: D20368920
Pulled By: jvillard
fbshipit-source-id: 456e8af6c
Summary: Impurity traces are quite big due to recording values histories. Let's simplify the traces by removing pulse's value histories.
Reviewed By: skcho
Differential Revision: D20362149
fbshipit-source-id: 8a2a6115e
Summary: Type is not enough to say a function call of `Provider.get` is expensive or not.
Reviewed By: jvillard
Differential Revision: D20366206
fbshipit-source-id: 83d3e8741
Summary:
This diff uses a type parameter of `Provider.get` to decide whether assigning expensive cost to the
function call or not. For example, if the type is small one like `Provider<Integer>`, it be
evaluated to have a unit cost, otherwise a linear cost.
To get the return type of `Provider.get`, I added a simple analyzer that collects "casted" types
backwards. In Sil, while the function call statement loses the return type, e.g,
```
n$5=_fun_Object Provider.get()(n$3:javax.inject.Provider*);
```
the `n$5`'s value is usually casted to a specific type at some point later.
```
*&$irvar0:java.lang.Object*=n$5
n$8=*&$irvar0:java.lang.Object*
n$9=_fun___cast(n$8:java.lang.Object*,sizeof(t=java.lang.Integer;sub_t=( sub )(cast)):void)
```
So, the analyzer starts from the cast statements backward, collecting the types to cast for each
variables.
Reviewed By: ezgicicek
Differential Revision: D20345268
fbshipit-source-id: 704b42ec1
Summary:
The previous diff finally unblocks this important milestone.
Now we have only one place when `convert_complex_exp_to_pvar` needs to
modify the typestate (in Sil.Load typechecking).
Because the only case left is when `~is_assignment: false`, we also can
simplify logic of updating the typestate (remove dependency on
`is_assignment`, and rename the methods so they more clearly say what
they do (instead of vague "update_typestate").
This diff, in turn, unblocks further refactoring. Namely, remove this
remaining usage of
`convert_complex_exp_to_pvar_and_register_field_in_typestate` from
Sil.Load instruction so that there is no tricky field magic left!
We will try doing it in follow up diffs.
Reviewed By: artempyanykh
Differential Revision: D20334924
fbshipit-source-id: 20ce185ed
Summary:
When assigning to field `field = expr()` we need to compare actual
nullability of `expr()` (rhs) with formal nullability of field (lhs).
Formal nullability is based on field declaration.
Before this diff lhs nullability was calculated based on actual
nullability of lhs. This is an absolutely wrong thing to do!
E.g. `field = null` would update nullability of field in typestate, and
from this field will be considered as nullable, so next time field =
null is allowed...
Due to series of hacks pile on top of each other, this wrong behavior
actually works correctly; but this depends on completely wrong things
happening in other places of the program (e.g. typestate modifies in
wrong places to make this work!).
This diff unblocks refactoring that will clean up hacks mentioned above,
and simplify typechecking logic.
Reviewed By: artempyanykh
Differential Revision: D20334925
fbshipit-source-id: 8bbcbd33a
Summary: The macro is dead. It had been used when Inferbo had include-based C++ models.
Reviewed By: jvillard
Differential Revision: D20309031
fbshipit-source-id: bcfd8f923
Summary:
Warning: This might be a bit brutal.
PerfStats and EventLogger are pretty much subsumed by `ScubaLogging`.
It seems no one has been looking at the data they generate recently.
Let's delete them! If we need to re-implement some parts later on, let's
do that using `ScubaLogging`, which is better (eg, still produces data
when infer crashes).
Things we lose:
- errors in the clang frontend due to missing decl translation, etc.
- errors in biabduction due to timeouts, functions not found, etc.
We could also re-implement these using BackendStats and ScubaLogging
instead of brutally deleting everything.
Reviewed By: ngorogiannis
Differential Revision: D20343087
fbshipit-source-id: 90a3121ca
Summary:
At some point we thought disconnected CFGs (where some nodes are not
reachable from the initial node) were signs of bugs in our frontend, but
it turned out not to be the case. Thus, we compute the boolean "is
connected" for each procdesc for the only purpose of logging that
uninteresting piece of information.
Delete it.
Reviewed By: ngorogiannis
Differential Revision: D20342834
fbshipit-source-id: 3f9317003
Summary:
The goals are to have all the checker definitions and documentation in one
place (except how to actually run them, since that's not quite the same
concept; for example inferbo is one checker but several analyses depend on its
symbolic execution), and later on to be able to link issues reported by infer
back to the checker that generated them.
This makes apparent that the documentation of our checkers is lacking,
not touching that in this diff.
Not sure if "analysis" would be a better name than "checker" at this
point? For instance "Linters" is one of the checkers, which historically
at least we have not considered to be the case.
Reviewed By: mityal
Differential Revision: D20252386
fbshipit-source-id: fc611bfb7
Summary:
Some options are deprecated and this is indicated with `~long:""`. But for
boolean options this creates a spurious `"--no-"` flag. Detect when the option
has an empty flag and don't create the "no" version in that case.
Reviewed By: ngorogiannis
Differential Revision: D20286830
fbshipit-source-id: 9a2095ea8
Summary:
Define a `ppx_sledge` ppx rewriter that composes all the ppx rewriters
used, so that the list needs to be specified only once.
Reviewed By: jvillard
Differential Revision: D20322874
fbshipit-source-id: f15540b7f
Summary:
It seems to currently not be possible to make dune `preprocess`
stanzas vary across contexts, without essentially generating the dune
files. A consequence is that it is not possible to pass
context-dependent command line arguments to ppx rewriters. So add
support for an environment variable instead.
Reviewed By: jvillard
Differential Revision: D20322871
fbshipit-source-id: f3f3ea413
Summary:
Move files, adjust build system, etc.
This also separates out the ppx_trace conditional compilation debug
tracing machinery into an independent package and library.
Reviewed By: jvillard
Differential Revision: D20322876
fbshipit-source-id: a50522462
Summary:
`Reg.demangle` is implemented by calling the `_cxa_demangle` C++
runtime system function. This will be linked into the sledge binary,
due to being linked with llvm, but will not necessarily be available
in the sledge library. So make it a dynamically-set function to avoid
calling an undefined function from the library.
Reviewed By: jvillard
Differential Revision: D20323791
fbshipit-source-id: bda9afd37
Summary:
The convenience symlinks from sledge/bin to the built binaries of
various build modes under sledge/_build/_install conflict with
upcoming code rearrangements, so remove them.
Reviewed By: jvillard
Differential Revision: D20322872
fbshipit-source-id: 1a7c99ae0
Summary:
Formulate the canonizer for Extract from Concat terms uniformly as a
concatenation of extracts.
Reviewed By: jvillard
Differential Revision: D20303064
fbshipit-source-id: a45bc45dd
Summary: This diff adds a model for Java's `Object.clone()` method (similar to existing shallow_copy).
Reviewed By: jvillard
Differential Revision: D20341073
fbshipit-source-id: 30ae40fe7
Summary:
Fixes#1234
Turns out I didn't catch this in local testing because docusaurus falls back on
exploring files in website/ locally for some reason.
Reviewed By: skcho
Differential Revision: D20342513
fbshipit-source-id: 87587ccc2
Summary:
Some (all?) of this is already tested in other tests, but this feature
is important enough (and the implementation is scattered accross the
whole code), so I found it useful to have a small test that ensures the
very basic things are working as expected.
See `NestedFieldAccess.java` that tests far more advances things, but
here we focus only very basic things: conditions, local variable
assignments, and explicit assignments.
Reviewed By: jvillard
Differential Revision: D20339056
fbshipit-source-id: a6cfd0043
Summary:
A java byte is not a short and a java character is not a C character. Fix those types by mapping them to what the spec ordains.
An extra advantage is that this establishes a bijection between java types and their project in the `sil` type system, so pretty printing in Java mode can actually be made to work.
Reviewed By: mityal
Differential Revision: D20330525
fbshipit-source-id: 00ac2294b
Artem Pianykh
Jules Villard
Josh Berdine
Dulma Churchill
Mitya Lyubarskiy
Amar Paul
Ezgi Çiçek
Sungkeun Cho
Martin Trojer
Nikos Gorogiannis