Summary: The new memory leaks analysis is now ready to be enabled by default and turned on in production. This also replaces the biabduction one which is now disabled.
Reviewed By: jvillard
Differential Revision: D21998666
fbshipit-source-id: 9cd95e894
Summary:
Turns out it was useful, so it is now reborn in OCaml.
Fixes https://github.com/facebook/infer/issues/1262.
Reviewed By: skcho
Differential Revision: D22016185
fbshipit-source-id: 31ccb7540
Summary:
This diff gives an order on running `test1`, `test2`, and `test3`. If they run parallel, they may
have a data race on writing `infer-out/.infer_runstate.json`.
Another minor fix is the object file path to remove.
Reviewed By: jvillard
Differential Revision: D21995671
fbshipit-source-id: eb9950cae
Summary:
There was an issue on `make build_ant_test` that newly generated `issues.exp.test` is empty. When
infer runs with `-- ant`, if there is already built objects in `ant_out`, infer analyzes nothing,
which result in the empty `issues.exp.test`. For example,
```
~/infer/infer/tests/build_systems/ant$ make test
[11:26:49][36924] Testing ant integration...
[ 2s][36924] SUCCESS Testing ant integration
~/infer/infer/tests/build_systems/ant$ touch `which infer`
```
The makefile tries to reanalyze ant targets because `infer` binary has been changed. However, there
is nothing to build/analyze, since `ant_out` still exists as the same.
```
~/infer/infer/tests/build_systems/ant$ make test
[11:26:57][37078] Testing ant integration...
[ 1s][37078] SUCCESS Testing ant integration
diff --git a/Users/scho/infer/infer/tests/build_systems/ant/issues.exp b/Users/scho/infer/infer/tests/build_systems/ant/issues.exp.test
index 376146b5f..e69de29bb 100644
--- a/Users/scho/infer/infer/tests/build_systems/ant/issues.exp
+++ b/Users/scho/infer/infer/tests/build_systems/ant/issues.exp.test
@@ -1 +0,0 @@
[-build_systems/ant/src/Hello.java, Hello.test():int, 2, NULL_DEREFERENCE, no_bucket, ERROR, [start of procedure test()]-]
Test output (build_systems/ant/issues.exp.test) differs from expected test output build_systems/ant/issues.exp
Run the following command to replace the expected test output with the new output:
make -C build_systems/ant replace
make: *** [test] Error 1
```
To handle this issue, this cleans `ant_out` before running infer.
Reviewed By: jvillard
Differential Revision: D21950916
fbshipit-source-id: f57056f6e
Summary:
A buck integration for capturing simultaneously clang and java targets.
Just like the java-specific `JavaGenruleCapture` integration, it relies on
dummy targets that depend on the flavoured clang versions.
For example, a `cxx_library` target named `//clang:hello` will have an associated target
called `//clang:hello_infer` that depends on `//clang:hello#infer-capture-all`,
and whose output is a text file containing the output path of the dependency.
Reviewed By: jvillard
Differential Revision: D21620458
fbshipit-source-id: 23919387b
Summary:
We stopped relying on an external perf data file to determine which functions are on the cold start. Let's remove this issue now.
NB: Keeping the `--perf-profiler-data-file` as deprecated to prevent issues on the CI and prod.
Reviewed By: skcho
Differential Revision: D21594150
fbshipit-source-id: faa58782d
Summary:
This function had been computing the name for ObjC methods wrong, with only the class name. This was causing wrong error messages in Pulse.
The main issue was that `Procname.to_simplified_string` was writing `Classname::methodname` for ObjC methods, which is not the convention. This confused the `hashable_name` funtion. So changing the method name to `Classname.methodname` which is more standard, and this also fixes `hashable_name`.
Reviewed By: ngorogiannis, jvillard
Differential Revision: D21570880
fbshipit-source-id: 13ed62cf8
Summary:
It suppresses cost reports of access methods, anonymous class methods, and auto-generated methods.
For those methods, this diff blocks reporting both expensive
issue (`EXPENSIVE_COLD_START/_UI_THREAD`) and complexity increase issue (`COMPLEXITY_INCREASE`).
Reviewed By: jvillard
Differential Revision: D21303068
fbshipit-source-id: 1c9533956
Summary:
The directory names had some interesting variety due to historical
reasons.
- {c,cpp,objc,objcpp}/errors/ date from the time when infer was only
biabduction
- java/infer/ dates from the time when we had an "--analyzer" option and
"infer" was one of them (sic), and eg another was "eradicate".
- c/biabduction/ dates from the time when the biabduction analysis was
being migrated to the "checkers" (AI) framework. For some reasons the
tests there are not a subset of c/infer/ but seem to be entirely new
tests.
The convention now dictates that we should name all of these
*/biabduction/. This diff moves the existing tests from c/biabduction/
into c/biabduction/misc/.
Reviewed By: mityal
Differential Revision: D21300147
fbshipit-source-id: 516d1cb15
Summary:
The test for the ant integration used to import all of biabduction tests
via a symlink. This is extremely annoying: whenever the biabduction
tests change, so do the ant tests.
Replace the ant tests with a simple single file project.
Reviewed By: ngorogiannis
Differential Revision: D21301450
fbshipit-source-id: 0d67d71d7
Summary:
Good night, sweet prince. This was never used and hasn't seen progress
in a while.
Reviewed By: jberdine
Differential Revision: D21201932
fbshipit-source-id: e6f537b30
Summary:
Currenlty the cost issue is printed at the first node of a function, which is usually the first
statment of the function. This may give a wrong impression that the cost of the statement is
changed.
This diff re-locate where to print issues with heuristics. Going backward from the first node
lines, it looks up a line satisfying,
1. A line should start with <fname> or should include " <fname>".
2. The <fname> found in 1 should be followed by a space, '<', '(', or end of line.
Reviewed By: jvillard
Differential Revision: D20766876
fbshipit-source-id: b4fee3180
Summary:
Re-implement the generation of an HTML report (with bug traces) in
OCaml.
Kills the --only-show as a side-effect, it is of dubious use since there
is already infer-out/report.txt to get the report list as text. A
follow-up diff adds numbers to the list in infer-out/report.txt for easy
cross-referencing with `infer explore --select 123`.
Reviewed By: skcho
Differential Revision: D20672769
fbshipit-source-id: 39b3a299d
Summary:
This diff adds a procedure name to the head of the trace in order to distinguish issues in the same line.
"Updated Cost is ..." is changed to "Updated Cost of <proc name> is ..."
Reviewed By: ezgicicek
Differential Revision: D20672214
fbshipit-source-id: 303b4492f
Summary:
Hopefully no one uses this. This is in Python and we'd like to get rid
of it. Easy enough to either re-implement if needed or to be
re-implemented by a third party.
Reviewed By: ngorogiannis
Differential Revision: D20626344
fbshipit-source-id: 484022482
Summary: There are no plans currently to track which lock protects each access, so reduce to the functional equivalent of having a singleton lock domain.
Reviewed By: skcho
Differential Revision: D20595013
fbshipit-source-id: d5100ac49
Summary:
`JavaSplitName` is used to represent Java types (in `Procname` in particular). The type itself is a pair of string (an optional package qualifier) and a "type name" (the quotes are there because it may contain array qualifiers).
For example `java.lang.Object[][]` should be represented as
```
{package=Some "java.lang"; typename="Object[][]"}
```
The constructor `make` was misused to construct instead types such as
```
{package=None; typename="java.lang.Object[][]"}`
```
This is evident when we print the return type of a `Procname` non-verbosely (the default), but we still see the package qualifier.
Obviously this is not just a pretty-printing bug, the values were themselves wrong.
The fix is to use the `of_string` constructor which will parse the package and separate it correctly. Another bug (in response to this one) had to be fixed in `Procname.is_vararg` to maintain behaviour in Nullsafe and Quandary.
Reviewed By: mityal
Differential Revision: D20394146
fbshipit-source-id: 4633902eb
Summary:
Main changes are:
1. Dune can promote targets into the source tree as a part of build. This
allows us to **remove custom promotion/installation logic in src/Makefile**.
2. Dune promotion only works for path within workspace. This required
**moving dune-workspace one folder up**: from infer/infer/src to infer/infer.
But this is not bad, since it makes it possible to migrate tests under dune at some point.
3. `checkCopyright` now also promoted into `infer/infer/bin` instead of
`infer/scripts` partly for consistency and partly because of the
dune-workspace location.
4. `byte` mode was replaced with `byte_complete`. The latter takes
similar amount of time to build compared to `byte`, but produces
standalone binaries that don't require InferCStubs to be
installed. This allowed to remove `dune_exec_shim` and custom logic
around `dune build InferCStubs.install` when dealing with byte
targets.
All in all, `infer/src/Makefile` is not about 2/3 its previous size
with less custom logic in Makefiles/scripts and more encoded in dune
build files.
Reviewed By: jvillard
Differential Revision: D20303902
fbshipit-source-id: 9e4c65bd0
Summary:
With profiles and `(env ...)` stanza it's possible to consolidate
various ocamlc/ocamlopt/etc setups in a single place.
Where previously we needed to append `dune.common` to every dune file
and specify `flags` and `ocamlopt_flags` now the flags are specified
in `env` and applied accross the board.
This allows to
1. simplify build definitions,
2. avoid the need to generate dune files,
3. use plain sexps instead of OCaml and JBuilder plugin in build
files.
(I'll try to address 2 and 3 in the followup patches).
Existing `make` targets should continue working as before. Also, we
can use dune CLI like so:
```
infer/src$ dune printenv --profile opt # <- very useful for introspection
infer/src$ dune build check
infer/src$ dune build check --profile test
infer/src$ dune build infer.exe --profile dev
infer/src$ dune build infer.exe --profile opt
```
Also, with just 1 context something like `dune runtest` will run unit
tests only once instead of N times, where N is the number of contexts.
Now, there's one difference compared to the previous setup with
contexts:
- Previously, each context had its own build folder, and building infer
in opt context didn't invalidate any of the build artifacts in default
context. Therefore, alternating between `make` and `make opt` had low
overhead at the expense of having N copies of all build artifacts (1
for every context).
- Now, there's just 1 build folder and switching between profiles does
invalidate some artifacts (but not all) and rebuild takes a bit more
time.
So, if you're alternating like crazy between profiles your experience
may get worse (but not necessarily, more on that below). If you want
to trigger an opt build occasionally, you shouldn't notice much
difference.
For those who are concerned about slower build times when alternating
between different build profiles, there's a solution: [dune
cache](https://dune.readthedocs.io/en/stable/caching.html).
You can enable it by creating a file `~/.config/dune/config` with the
following contents:
```
(lang dune 2.0)
(cache enabled)
```
With cache enabled switching between different build profiles (but
also branches and commits) has ~0 overhead.
Dune cache works fine on Linux, but unfortunately there are [certain
problems with
MacOS](https://github.com/ocaml/dune/issues/3233) (hopefully, those
will be fixed soon and then there will be no downsides to using
profiles compared to contexts for our case).
Reviewed By: jvillard
Differential Revision: D20247864
fbshipit-source-id: 5f8afa0db
Summary:
Make <infer-out>/report.json the default value for this option, as this
is what is used 99% of the time. Clean up test options using this.
Reviewed By: ngorogiannis
Differential Revision: D20362644
fbshipit-source-id: a1bb18757
Summary: Was broken by previous diff: I forgot to update issues.exp
Reviewed By: artempyanykh
Differential Revision: D20001233
fbshipit-source-id: 67f534349
Summary:
Use a record of package, class name to store (qualified) Java class names. This saves the round trip of concatenating then splitting again, etc, as well as saves some memory in the type environment as now the package paths can be shared across classes of the same package (about 10% in tests).
Also remove some unfortunate APIs.
Reviewed By: jvillard
Differential Revision: D19969325
fbshipit-source-id: f7b7f5a55
Summary: In line with changes to loom query in D19903057, let's adjust Infer's processing of the results.
Reviewed By: martintrojer
Differential Revision: D19902933
fbshipit-source-id: 200b3a03e
Summary: Not needed any more as infer's concurrency isn't controlled via make.
Reviewed By: jvillard
Differential Revision: D19905712
fbshipit-source-id: f97ef4421
Summary:
Since Javalib 3.2, a new feature allows to rewrite
methods that contain (some specific form of) closures. Infer
now uses it. When loading each class we rewrite them and
new classes generated by Javalib to implements closures
(i.e. Java interfaces)<
Reviewed By: ngorogiannis
Differential Revision: D19389227
fbshipit-source-id: 245dd4404
Summary: We don't use allocation costs in prod at the moment. There is no plan to do so in the near future. Let's not report them anymore and also save some space in `costs-report.json`.
Reviewed By: skcho
Differential Revision: D19766828
fbshipit-source-id: 06dffa61d
Summary:
The previous diff changes the message for params case, this one handles
return.
Reviewed By: artempyanykh
Differential Revision: D19430706
fbshipit-source-id: f897f0e56
Summary:
As suggested by Ilya, the current message can be improved in a way that
it can contain more clear action. I also added artempyanykh's explanation at the
end of message to provide an additional justification from common sense
perspective.
But most importantly, the previous message was missing a space which is
eye bleeding, how come haven't I noticed this before, I can't stand it
OMG.
Reviewed By: artempyanykh
Differential Revision: D19430271
fbshipit-source-id: dd31f7adb
Summary:
Kill these tests as that mode is not supported anymore.
Note that :
- "buck_cross_module" was effectively already dead since it's not hooked up to `make test`
- "buck" is actually another copy of "genrule" so wasn't testing anything
Reviewed By: ngorogiannis
Differential Revision: D19176166
fbshipit-source-id: b5bb90448
Summary:
This changes how we select amongst our (currently) 4 Buck integrations
for Java and clang, as well as how the user's choice is reflected by the
Config module.
The old command line interface is still supported but is now deprecated.
The changes in how to select each integration are:
- clang via "flavors", activated with `--flavors`, now with `--buck-clang`
- clang via "compilation DB", activated with `--buck-compilation-database`, unchanged
- Java via "genrule", activated with `--genrule-master-mode`, now with `--buck-java`
- Java "without genrules", used to be activated by *not specifying any other Buck mode*, unchanged
Instead of various `Config` flags corresponding to the previous CLI that
are allowed in any combination of `flavors`,
`buck_compilation_database`, `genrule_master_mode`, `Config` now exposes
a single `buck_mode` datatype. This allows, eg, `flavors` to override
`buck_compilation_database` if needed. It will also make it easier to
get rid of the old "Java without genrules" integration in a later diff
(see inline comments).
Reviewed By: ngorogiannis
Differential Revision: D19175686
fbshipit-source-id: 29b3831be
Summary:
Old versions of sawja/javalib got the line numbers slightly wrong. The workaround was to do a regexp search in the source file for the right line.
My understanding is that this is no longer necessary. This diff removes it.
Reviewed By: jvillard
Differential Revision: D19033415
fbshipit-source-id: 2da19d66d
Summary:
This applies some simplifications that were previously
done after footprint (and therefore lost), and some
simplifications that require looking at both pre and
post.
Reviewed By: ngorogiannis
Differential Revision: D19035494
fbshipit-source-id: bad79534a
Summary: The clang plugin exports C++ mangled names in hashed form for perf reasons, so we need to hash the incoming mangled names in the profiler samples, so that we can compare them.
Reviewed By: skcho
Differential Revision: D18761842
fbshipit-source-id: 3072b5e33
Summary:
This also prints the CFGs *after* pre-analysis for individual procedures
in infer-out/captured/<filename>/<proc>.dot. One can also look up the
CFGs before pre-analysis in infer-out/captured/proc_cfgs_frontend.dot.
Context: I want to add a pre-analysis that needs to look at proc
attributes inter-procedurally. For this to make sense it has to happen
*after* all of capture, and before analysis.
Thus, this diff brings back the lazy running of the pre-analysis like in
D15803492, except that we still make sure to run the pre-analyses
systematically regardless of the checkers being run by running the
pre-analysis from ondemand.ml. Also we don't need to re-introduce the
"did_preanalysis" proc attribute for the same reason that the
pre-analysis is now run once and for all by ondemand.ml (instead of each
individual checker back in the days).
This has the benefit of running the pre-analysis only when needed, and
the drawback that several concurrent processes analysing the same proc
descs will duplicate work. Since pre-analyses are supposed to be very
fast I assume that neither is a big deal. If they become more expensive
then the benefit gets bigger and the drawback is just the same as with
regular analyses.
Reviewed By: skcho
Differential Revision: D18573920
fbshipit-source-id: de350eaef
Summary: This diff get static value with `EMPTY` field from class initializer.
Reviewed By: ngorogiannis
Differential Revision: D18616588
fbshipit-source-id: 26414c9b2
Summary:
Two goals:
1. Be less assertive when speaking about third party code (it might be
written with different conventions).
2. Point to third party signatures folder so the users know how to
proceed
Reviewed By: artempyanykh
Differential Revision: D18571514
fbshipit-source-id: 854d6e746
Summary:
Whole bunch of changes aimed to make error messages more clear and
concise.
1/ Wording and language is unified. We make errors sound more like a
type system violations, rather than linter reccomendations.
Particularly, we refrain from saying things like "may be null" - this is
a linter-style statement that may provoke discussions (what if the
developer knows it can not be null in this particular case).
Instead, we refer to declared nullability and nullability of actual values. This way, it is more clear that this is not a heuristic, this is how rules of a type-system work.
2/ Additionally, we drop things like field class in places when the
context should be clear by who looks at the error. We expect the user
sees the code and the error caption. So e.g. we don't repeat the word "field"
twice.
3/ In cases when we are able to retrieve formal param name, we include it for
usability.
4/ For Field not initialized error, we refer to Initializer methods:
this is a non-obvious but important nullsafe feature.
Reviewed By: artempyanykh
Differential Revision: D18569762
fbshipit-source-id: 9221d7102
Summary:
It make the message bit less heavy, and also it is kind of obvious that
it is origin.
In follow up diffs we will change the text so it is hopefully even more
obvious.
Reviewed By: artempyanykh
Differential Revision: D18527695
fbshipit-source-id: a305d547b
Summary:
1. We don't want to teach the users to ignore noise origin because
sometimes we are going to render something useful for them.
2. It just looks not cool.
Reviewed By: artempyanykh
Differential Revision: D18527694
fbshipit-source-id: 0ea248122
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Dulma Churchill
Jules Villard
Sungkeun Cho
Nikos Gorogiannis
Ezgi Çiçek
Artem Pianykh
Mitya Lyubarskiy
David Pichardie
Radu Grigore
Martin Trojer