Summary: Let's make UI/Cold start parts of the message bold to get more attention.
Reviewed By: jvillard
Differential Revision: D18504857
fbshipit-source-id: b0f199f55
Summary:
We consider Java collections to be like c++ std::vectors and add models for
- `Collections.get(..)`
- `__cast`
Reviewed By: skcho
Differential Revision: D18449607
fbshipit-source-id: 448206c84
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Summary:
The order was wrong: the map from procnames to node-ids was cleaned first, but to clean the map from node-ids to nodes, we need the id and we have already removed it.
The symptom was that effectively no new leaves are created by "removing" a node, so the call graph scheduler quickly devolves to the file-based one.
Reviewed By: skcho
Differential Revision: D18448209
fbshipit-source-id: f272a8112
Summary:
There was some over-general treatment of reachability, in anticipation of changes that didn't happen.
In particular, we only need to flag/remove single nodes, as they must be leaves to be scheduled,
therefore we never need to traverse their successors, because there aren't any.
Reviewed By: jvillard
Differential Revision: D18425905
fbshipit-source-id: b86490542
Summary:
- Convert `task_generator` into a module of `ProcessPool` and collect inside the two combinators which were in semi-random places.
- Make `SyntacticCallGraph` export a `task_generator` as opposed to a call-graph builder.
- Separate `target` type and put it in its own module to avoid dependency cycles.
Reviewed By: skcho
Differential Revision: D18425718
fbshipit-source-id: 7957edac8
Summary: `Str.regexp_string` should be used to find a method name instead of `Str.regexp`.
Reviewed By: ezgicicek
Differential Revision: D18136598
fbshipit-source-id: c4b56dd64
Summary:
The wrong function was used when we tried to see if the class is
annotated with NullsafeStrict. This made it work only for non-static
methods.
Now we use the proper way.
Reviewed By: ngorogiannis
Differential Revision: D18113848
fbshipit-source-id: 02b7555be
Summary:
See explanations in D17955104.
This renames `AbstractAddress` to `AbstractValue` since they are not
necessarily addresses.
Reviewed By: ezgicicek
Differential Revision: D17955290
fbshipit-source-id: 8bb4c61f2
Summary:
- Putting test determinator in own directory
- Putting Java procname creation stuff in its own module
Reviewed By: skcho
Differential Revision: D17929885
fbshipit-source-id: 4f2578566
Summary:
By some unfortunate logic, OCaml often decides to use
`sexp_list`/`sexp_option` instead of just `list`/`option`. Sometimes
these get copy/pasted in interface files.
It would be good to tell OCaml not to do that in the first place but in
the meantime: this diff.
Reviewed By: ngorogiannis
Differential Revision: D17907938
fbshipit-source-id: 7546834a2
Summary:
Describe what the --report-*-* options actually do instead of their
outdated documentation from the time where this was
`--checkers-blacklist-regex`, `--infer-blacklist-regex` and the like.
Reviewed By: dulmarod, mityal
Differential Revision: D17906015
fbshipit-source-id: 204349e9e
Summary: Not used feature and with no obvious roadmap anymore.
Reviewed By: jberdine, jvillard
Differential Revision: D17855860
fbshipit-source-id: fd75b9d62
Summary: `litho` checker contained two checkers: required-props and graphQL field accesses. Although they use the same domain, their reporting conditions and analysis details are different. However, they were bundled into the same analysis by adding disjunctions to `exec_instr` to handle both cases. Let's separate them into two different checkers, keeping a modular transfer function and analyzer that is reused by these two checkers.
Reviewed By: skcho
Differential Revision: D17788834
fbshipit-source-id: 47d77063b
Summary:
The documentation and uses of filtering disagree. One typical usage is deduplication.
Split that where obvious, add comments where not obvious, and leave alone when obviously unrelated to deduplication.
Reviewed By: mityal
Differential Revision: D17715329
fbshipit-source-id: ec757927b
Summary: The analysis is not intra-procedural, hence we don't really read the payload. Let's remove it.
Reviewed By: ngorogiannis
Differential Revision: D17603911
fbshipit-source-id: c92b5c602
Summary: When we have an annotation like `Prop(varArg = X)` or ` ThreadSafe(enableChecks = true)`, we were not able to pick up the names of the parameters like `varArg` or `enableChecks`. This diff fixes that.
Reviewed By: skcho, ngorogiannis
Differential Revision: D17571377
fbshipit-source-id: 5293b5810
Summary:
Introduce a new experimental checker (`--impurity`) that detects
impurity information, tracking which parameters and global variables
of a function are modified. The checker relies on Pulse to detect how
the state changes: it traverses the pre and post pairs starting from
the parameter/global variable and finds where the pre and post heaps
diverge. At diversion points, we expect to see WrittenTo/Invalid attributes
containing a trace of how the address was modified. We use these to
construct the trace of impurity.
This checker is a complement to the purity checker that exists mainly
for Java (and used for cost and loop-hoisting analyses). The aim of
this new experimental checker is to rely on Pulse's precise
memory treatment and come up with a more precise im(purity)
analysis. To distinguish the two checkers, we introduce a new issue
type `IMPURE_FUNCTION` that reports when a function is impure, rather
than when it is pure (as in the purity checker).
TODO:
- improve the analysis to rely on impurity information of external
library calls. Currently, all library calls are assumed to be nops,
hence pure.
- de-entangle Pulse reporting from analysis.
Reviewed By: skcho
Differential Revision: D17051567
fbshipit-source-id: 5e10afb4f
Summary:
The code was already trying to do that but failing. Now it works.
This revealed a slight bug where the progress bar would always stop at
N-1/N 99% jobs. Fixed by moving the progress bar updates *after* the
operation that might decrease the number of jobs left.
Reviewed By: mityal
Differential Revision: D17423978
fbshipit-source-id: fc32db5f3
Summary:
Previously we would incorrectly report the time for the whole process
and this could include capture time too.
Reviewed By: mityal
Differential Revision: D17423977
fbshipit-source-id: b3ed754b3
Summary: We should be able to run this processing ast steps without running linters or capture. This also adds a new module ProcessAST to do the processing, Capture.ml should not know anything else than calling the respective modules for capture, linting or processing.
Reviewed By: ngorogiannis
Differential Revision: D17501453
fbshipit-source-id: 30adba5b1
Summary:
- Instead of merging one target DB into the main DB at a time, merge all target DBs into an in-memory DB (thus, no writing) and then dump it into the main DB at the end. This makes merging faster.
- When using the sqlite write daemon, there is no reason to drive the merge process from the master, sending each individual target to merge down the socket and doing one DB merge at a time. Here we move all the DB merging logic in the daemon, and expose a single function that does it all.
- Refactor some common functionality (notably the `iter_infer_deps` function is now in `Utils`) and remove dead files.
This can be also done using a temporary DB (which is not limited to memory) but this showed worse perf in tests than the in-memory solution as well as the current state of things (! possibly Sqlite-version related?).
Reviewed By: skcho
Differential Revision: D17182862
fbshipit-source-id: a6f81937d
Summary: This calls the method `delete_capture_and_analysis_data` introduced in D17184424 once the appropriate specs files for incremental analysis have been deleted. This fixes two bugs that I observed in incremental analysis that were arising because of stale state left in the results directory.
Reviewed By: ngorogiannis
Differential Revision: D17184424
fbshipit-source-id: d63f59db9
Summary: Use_after_free was used both for biabduction and pulse, and the biabduction version is blacklisted by default. As a result, the Pulse version was also disabled unintentionally. This changes the name of the old use_after_free so that now we can get use_after_free bugs whenever pulse is enabled.
Reviewed By: skcho
Differential Revision: D17182687
fbshipit-source-id: 539ca69de
Summary:
It uses inline record for Sil.Load and Sil.Store for preparing the
following extention.
Reviewed By: dulmarod
Differential Revision: D17161288
fbshipit-source-id: 637ea7bfa
Summary:
Implementation of write-serializer for Sqlite. Points of note:
- A Unix socket is used for communication. This avoids buffer-size limitations, as the objects we send for writing may exceed said limits.
- No daemon is used if running under buck or in genrule mode, as this usually means a single-threaded job capturing into the DB.
- When the daemon is running, read-only access is *not* enforced for other processes. This makes starting and stopping the daemon during Infer execution easier and more robust. In WAL mode this should not have any effect on performance.
- This version is not economical with connections, it uses one per query, todo.
Reviewed By: jvillard
Differential Revision: D17077183
fbshipit-source-id: fa9877d6c
Summary:
Write contention is becoming a problem in parallel capture (eg when make runs with high parallelism) or when analysis writes CFGs to the DB in parallel (eg when analysing blocks in ObC). This is believed to lead to BUSY errors in Sqlite.
This is step 1 of a process where all writes are cordoned-off in one module, and fixing the interface for that module.
Reviewed By: skcho
Differential Revision: D16985034
fbshipit-source-id: 3d7ce381b
Summary:
Currently, the specs directory is cleaned after running capture. This means that the `changed-files` are interpreted in the context of the second set of source files. Therefore if a procedure is deleted from the second set of source files, its specs file will not be deleted.
This moves the cleaning of the specs directory to before capture, to avoid this problem.
Reviewed By: ngorogiannis
Differential Revision: D17093980
fbshipit-source-id: e1a8d8a54
Summary:
This adds logging of the number of nodes in the reverse analysis call graph, and the number of these nodes that are invalidated by incremental analysis.
This data will show the precision of incremental analysis.
Reviewed By: ngorogiannis
Differential Revision: D16939101
fbshipit-source-id: 1e465f1a6
Summary:
It doesn't make sense to use incremental analysis without specifying changed files. This is a possible source of future bugs.
This commit causes infer to die if incremental analysis is used without changed files.
---
Previously:
I think this code is currently a bit brittle because the CI shadow builds sometimes use `--incremental-analysis` because they are called with the same command as the diff analysis.
I am worried that in the future the shadow builds could be broken by this, although everything looks like it works right now. This diff would prevent breaking smoke builds in future because the shadow builds don't set changed-files (afaik).
However, possibly this is not the right place to fix the problem. It might be better to change the CI, I'm not sure.
Reviewed By: mityal
Differential Revision: D16829192
fbshipit-source-id: 5ee1ce9d0
Summary:
Use whatever information we can to decide whether to use C or Java
syntax when outputting an access expression, now that we store them as
such.
Also, make cluster callbacks explicitly set the language, as this was not done before and led to some confusion (Clang being set when analysing a Java file).
Reviewed By: skcho
Differential Revision: D16884160
fbshipit-source-id: 40adf9f35
Summary: Remove duplicate `s` when printing the time taken by the analysis
Reviewed By: ngorogiannis
Differential Revision: D16710277
fbshipit-source-id: 3ba7f6693
Summary:
Add logging for the number of procedures whose summaries are invalidated by incremental analysis
This will help verify that incremental analysis is working as expected in production
Reviewed By: ngorogiannis
Differential Revision: D16686911
fbshipit-source-id: 53c89c3bb
Summary:
The models are only for biabduction so try to make that clearer in the
code and documentation.
Reviewed By: skcho
Differential Revision: D16603147
fbshipit-source-id: 4a2be53de
Summary:
Count the following:
- how many procedures were *actually* analyzed (i.e. some checkers ran
on them)
- how many times an analysis result was retrieved from the local cache
and how many times it was missed
Reviewed By: skcho
Differential Revision: D16561867
fbshipit-source-id: 8c43ce13c
Summary:
Instead of `let incr_foo () = global_stats.foo <- global_stats.foo + 1` where you have to
check that you copy/pasted the right stuff and substituted `foo`
everywhere, write `let incr_foo () = incr Fiels.summary_foo` where
there's less room for errors.
Reviewed By: artempyanykh
Differential Revision: D16561868
fbshipit-source-id: 77ea09bef
Summary: The reverse analysis call-graph is logged if `--debug-level-analysis` > 0, so that its value can be inspected for tests
Reviewed By: jvillard
Differential Revision: D16440567
fbshipit-source-id: 1ec6af1f3
Summary: This implements incremental diff analysis by deleting only the summaries that need to be re-analyzed, keeping all summaries corresponding to procedures that have not been changed (or had a callee change).
Reviewed By: jvillard
Differential Revision: D16358474
fbshipit-source-id: 660a704a0
Summary:
There was a little bit of code duplication around `analyze_proc` to deal with
the fact that we may be starting from either a proc name or a proc desc. Create
a new `callee` type that represents this more explicitly. This allows not
loading the `proc_desc` eagerly when we don't need it, although that doesn't
seem to impact perf measurably.
Reviewed By: ezgicicek
Differential Revision: D16442221
fbshipit-source-id: 8e8ebbd6b
Summary:
:
In previous commits we introduced deriving capabilities in Backend stats.
Now we can rewrite the code so that usage of all fields is enforced at compile time.
Reviewed By: jvillard
Differential Revision: D16458130
fbshipit-source-id: aef751440
Ezgi Çiçek
Josh Berdine
Nikos Gorogiannis
Sungkeun Cho
Dulma Churchill
Mitya Lyubarskiy
Jules Villard
Phoebe Nichols