Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary:
Adds a new type and branching for a missing path of execution.
closes#575
Reviewed By: jvillard
Differential Revision: D4738681
fbshipit-source-id: f72344c
Summary:
Add support for Makefiles to the copyright linter. Makefiles are a bit
different than shell because they should start with the copyright notice
straight away (whereas shell starts with the #! stuff).
Reviewed By: mbouaziz
Differential Revision: D4786620
fbshipit-source-id: 504dc23
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
Most of our tests work by comparing the output of some command to a baseline
expected output. It's often needed to update that baseline.
Previously, that was crudely done by attempting to move every foo.exp.test file
to foo.exp. This does not work terribly well, in particular because
foo.exp.test might be stale.
Instead, add a `replace` target to every test that knows how to update the
baseline. This allows custom behaviours too, eg in the differential tests.
Most of the tests include base.make or differential.make, so add a replace target
there. A few tests are completely custom, add a replace target to them too.
Reviewed By: jeremydubreil
Differential Revision: D4754279
fbshipit-source-id: ec34273
Summary:
All tests were redirecting `stderr` into duplicates.txt which made it much harder to see other error messages in stderr (such as uncaught exceptions).
To mitigate it, write duplicates to separate file and don't redirect `stderr` to another file.
Reviewed By: jvillard
Differential Revision: D4728938
fbshipit-source-id: 8ad2fc8
Summary:
Two issues in the previous code:
1. We'd just tack on `#compilation-database` so if there already are `#flavors`
in a Buck target then we get a malformed `#flavors#compilation-database`
instead of `#flavors,compilation-database`. There's already code to deal
with that for other flavors (`#infer-capture-all`), so extend and reuse that.
2. The code didn't work if there are spaces in target names (sigh). Harden the
code a bit so that it works. Unfortunately Buck doesn't escape spaces at all
in its `buck targets --show-output` output, so the parsing still relies on
there being no spaces in flavors to work correctly. Sample output:
```
$ buck targets --show-full-output //clang_compilation_database:Hel\ lo#compilation-database
Not using buckd because watchman isn't installed.
[+] PROCESSING BUCK FILES...0.1s [100%] 🐳 New buck daemon
//clang_compilation_database:Hel lo#compilation-database /home/jul/infer/infer/tests/build_systems/codetoanalyze/buck-out/gen/clang_compilation_database/__Hel lo#compilation-database.json
```
Also, some code in codetoanalyze/clang-compilation-database/ didn't compile, so
fix that.
Reviewed By: dulmarod
Differential Revision: D4714338
fbshipit-source-id: b8ae324
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
We were including hex of empty string if mangled name was not empty (so for all C++ functions).
Instead, include hex of a source file only if it's not empty
Reviewed By: mbouaziz
Differential Revision: D4705388
fbshipit-source-id: 55b6587
Summary:
Procnames files are now reversed qualifier lists with `#` as separator (instead of `::` which needs to be escaped in bash).
Because of the mechanism that is used to obtain qualifiers, it also affects naming for ObjC classes.
Examples:
```
std::unique_ptr<int>::get -> get#unique_ptr<int>#std#__MANGLED,...__ // C++ method
folly::split -> split#folly#__MANGLED,..._ // function within namespace
NSNumber numberWithBool: -> numberWithBool:#NSNumber#class // ObjC method
```
Reviewed By: jvillard
Differential Revision: D4689701
fbshipit-source-id: c3acfc6
Summary:
There is no point in attaching plugin to `clang -E` calls since they don't produce any AST.
Same applies to `-M`, `-MM`, etc. (but not `-MD` nor `-MMD`).
Reviewed By: jvillard
Differential Revision: D4681618
fbshipit-source-id: 7a76add
Summary:
When parsing .inferconfig and the env var, allow all modes of infer. This
allows people to provide default values for options in .inferconfig. This
requires subcommands' options to be all distinct, but that's already the case.
Reviewed By: jberdine
Differential Revision: D4674672
fbshipit-source-id: 992b454
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
Make sure `inferTraceBugs` works with non-ascii characters. Harden the code a
bit more on the way.
Fixes#592
Reviewed By: mbouaziz
Differential Revision: D4659016
fbshipit-source-id: 79f7a80
Summary:
- The package declaration was wrong
- There was a leftover copy-pasted resource leak test from `CursorLeak.java`.
Reviewed By: sblackshear
Differential Revision: D4612687
fbshipit-source-id: 42c1a35
Summary:
Running Buck can be very expensive depending on your installation of Buck (eg,
no watchman). Hardcoded paths seem good enough for now as `make test` will
catch if they go out of date.
Reviewed By: jeremydubreil
Differential Revision: D4597629
fbshipit-source-id: da9b704
Summary: Shorter is better. `--compilation-database` was taken, renaming it to `--buck-compilation-database`.
Reviewed By: dulmarod
Differential Revision: D4567028
fbshipit-source-id: 011cd6f
Summary:
Sevel auxiliary files made it to the output directory of the analysis of individual targets when analyzing Java projects build with Buck. However, these files are then taken into account= to compute the target rule key and then to decide whether to analyze the dependent targets. Since these auxiliary files were containing time sentive information, every cach miss on a given target would then invalitate the cache entries for all the dependent targets.
This diff cleans up the output directory to only keep the specs files, the `global.tenv` and the `report.json` files which are the only artifacts needed to analyze the dependent targets
This diff makes a minimal number of changes to see how it behaves in prod, but I intend to refoctor this more when continuing to add support for running Infer with genrules
Reviewed By: sblackshear
Differential Revision: D4562615
fbshipit-source-id: 4628420
Summary:
Xcode's compilation databases follows a different convention than cmake's and
escape the `"file"` and `"dir"` fields of each unit to make them shell-ready.
We need to treat them differently when reading them.
This adds a new `--clang-compilation-db-files-escaped` option and makes the
code related to reading compilation databases deal correctly with both
conventions.
Reviewed By: akotulski
Differential Revision: D4559239
fbshipit-source-id: 51120ae
Summary: Some compilation databases give relatives paths for the `"file"` field. This is not ambiguous as there is also a `"dir"` field, so use that to make the path absolute when needed.
Reviewed By: dulmarod
Differential Revision: D4559145
fbshipit-source-id: be36a16
Summary: This annotation can then be used to suppress the warnings on non-android Java projects.
Reviewed By: sblackshear
Differential Revision: D4544858
fbshipit-source-id: 8a0b8fa
Summary: This case was already working but there was no tests for it
Reviewed By: sblackshear
Differential Revision: D4529473
fbshipit-source-id: ca3ff02
Summary: This fixes a wrong level of indirection when performing the type substitution.
Reviewed By: sblackshear
Differential Revision: D4521008
fbshipit-source-id: 7324ea6
Summary: This should fix the issue with broken invariants when the method specialization on pointer ends up doing a substitution on non pointer types
Reviewed By: sblackshear
Differential Revision: D4487232
fbshipit-source-id: f3fce84
Summary: Just adding some more test cases on how Infer handles dynamic dispatch.
Reviewed By: jberdine
Differential Revision: D4486529
fbshipit-source-id: d90ef42
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
Also make sure we don't introduce deprecated options in our repo, eg when
calling infer from infer.
Reviewed By: jeremydubreil
Differential Revision: D4430379
fbshipit-source-id: 77ea7fd
Summary: This allows to modify the structure of the buck project under test with less risk of breaking the tests
Reviewed By: sblackshear
Differential Revision: D4411721
fbshipit-source-id: 6ee2cc5
Summary:
This makes it more obvious why infer would force a path to be absolute since we
base that decision on the resolved path. For instance:
```
$ mkdir foo
$ cd foo
$ ln -s ../examples goo
$ infer -- clang -c goo/hello.c
[...]
/home/jul/infer/examples/hello.c:14: error: NULL_DEREFERENCE
```
We see that the path is outside of the current directory clearly, whereas
before infer would report on "goo/hello.c".
Reviewed By: akotulski
Differential Revision: D4409579
fbshipit-source-id: 7172005
Summary:
- Only generate one extra genrule for running infer. Remove all other java library rules currently being generated
- Generate infer genrule only if the `java_library` has `srcs`, otherwise there is nothing to analyze
- Use `SRCDIR` to avoid making a copy of the target sources as buck will just symlink them instead
- Added support for `android_library` rules as well
- Added support to generate both `infer` and `eradicate` genrules
Closes https://github.com/facebook/infer/pull/558
Reviewed By: sblackshear
Differential Revision: D4400365
Pulled By: jeremydubreil
fbshipit-source-id: 24750e2
Summary:
If we don't delete infer-out then it gets polluted with files from previous
versions of infer resulting in segfaults during `make test`.
Reviewed By: cristianoc
Differential Revision: D4397723
fbshipit-source-id: 1211d40
Summary:
The cmake test removes the _build dirs, and the utf8_in_pwd test
rsyncs them.
Reviewed By: akotulski
Differential Revision: D4375554
fbshipit-source-id: 3fa088c
Summary: Need to upgrade in order to specify some taint properties on a more recent `WebView` API.
Reviewed By: cristianoc
Differential Revision: D4382590
fbshipit-source-id: 0925742
Summary: Use the lazy dynamic dispatch by default in prod for the Java analysis
Reviewed By: sblackshear
Differential Revision: D4356872
fbshipit-source-id: 491e92e
Summary:
Without this it's not always obvious which test fails. It also makes it easier
to mass-patch test failures from the CI jobs to replace expected outputs with
actual outputs (eg, when debugging osx frontend tests from linux).
Reviewed By: jberdine
Differential Revision: D4352205
fbshipit-source-id: 8887d7b
Summary:
Seems like we cannot run 2 instances of Buck in parallel even when one uses
buck-out/ and the other buck-out/foo/.
Reviewed By: sblackshear
Differential Revision: D4347090
fbshipit-source-id: 7e65d2f
Jules Villard
Andrzej Kotulski
Paco Estevez Garcia
Martino Luca
Juergen Hoetzel
Jeremy Dubreil
Dulma Churchill
Gautam Korlam
Josh Berdine
Sam Blackshear