Summary: This diff suppresses cost issues on lambda and auto-generated procedures, since they were too noisy.
Reviewed By: ezgicicek
Differential Revision: D21153619
fbshipit-source-id: 65ad6dcc3
Summary:
Replace horrible hack with ok hack.
The main difficulty in implementing the disjunctive domain is to avoid
the quadratic time complexity of executing the same disjuncts over and
over again when going around loops:
First time around a loop, assuming for example a single disjunct `d`:
```
[d]
loop body
[d1' \/ d2']
```
Second time around the same loop: the new pre will be the join of the
posts of predecessor nodes, so `old_pre \/ post(loop,old_pre)`, i.e.
`d \/ d1' \/ d2'`. Now we need to execute `loop body` again
*without running the symbolic execution of `d` again* (and the time after
that we'll want to not execute `d`, `d1'`, or `d2'`).
Horrible hack (before): Disjuncts have a boolean "visited" attached
that does its best to keep track of whether a given disjunct is old or
new. When executing a single *instruction* look at the flag and skip the
state if it's old. Of course we have no way to know for sure so it turns
out it was often wrongly re-executing old disjuncts. This was also
producing the wrong results over even simple loops: only the last
iteration would make it outside the loop for some reason. Overall, the
semantics were pretty untractable and shady at best.
New hack (this diff): only run instructions of a given *node* on
disjuncts that are not physically equal to the "pre" ones already in the
invariant map for the current node.
This gives the correct result over simple loops and a nice performance
improvement in general (probably the old heuristic was hitting the
quadratic bad case more often).
Reviewed By: skcho
Differential Revision: D21154063
fbshipit-source-id: 5ee38c68c
Summary:
1. Package will make the error too verbose.
2. We don't even need to say it is "class" because we say it in the error
description ("Class has 0 issues and can be marked Nullsafe").
Reviewed By: artempyanykh
Differential Revision: D21131998
fbshipit-source-id: 6ccca7615
Summary:
One source of false positives on container races is when the container member field is initialised to a concurrent version in a constructor, but the static type of the field doesn't reflect the thread safety of it.
This solution
- tracks flows from constructors of safe data structures to abstract addresses;
- initialises the initial attribute state when analysing a non-constructor method to that achieved by all constructors/class-initializers.
- checks for that attribute when recording container accesses.
Reviewed By: jvillard
Differential Revision: D21089428
fbshipit-source-id: 02a88f6e8
Summary:
There are two types of anonymous classes (not user defined classes):
- classic anonymous classes (defined as $<int> suffixes)
- lambda classes (corresponding to lambda expressions). Experimentally,
they all have form `$Lambda$_<int>_<int>`, but the code just uses
`$Lambda$` as a heuristic so it is potentially more robust.
# Problem this diff solves
When generate meta-issues for nullsafe, we are interested only in
user-defined classes, so we merge all nested anonymous stuff to
corresponding user-defined classes and hence aggregate the issues.
Without this diff, for each lambda in the code, we would report this as
a separate meta-issue, which would both screw up stats and be confusing
for the user (when we start reporting mode promo suggestions!).
Reviewed By: artempyanykh
Differential Revision: D21042928
fbshipit-source-id: a7be266af
Summary:
This diff revises how to handle the unknown location in inferbo in two ways:
* stop appending field to the `Unknown` location, e.g. `Unknown.x.a` is evaluated to `Unknown`
* redesign the abstract of multiple locations, like `Bottom` < `Unknown` < `Known` locations
I am doing them in one diff since applying only one of them showed bad results.
Background: `Unknown` was adopted for abstracting all unknown concrete locations, so we could avoid missing semantics of assignments to unknown locations. We tried to keep soundness. However, it brought some other problems related to precision and performance.
1. Sometimes especially when Inferbo failed to reason precise pointer values, `Unknown` may point to many other abstract locations.
2. At that time, value assignments to `*Unknown` makes the situation worse: many abstract locations are updated with imprecise values.
This problem harmed not only its precision, but also its performance since it introduced more location entries in the abstract memory.
Reviewed By: jvillard
Differential Revision: D21017789
fbshipit-source-id: 0bb6bd8b5
Summary:
See the code comment re: why don't we also recommend "strict" at this
stage. We can always change it later when we think users are happy with
strict.
Reviewed By: artempyanykh
Differential Revision: D21039553
fbshipit-source-id: 758ccf32c
Summary:
This diff is a step forward to the state when the list of type violations is
independent of the mode (and we use mode solely to decide re: whether to
report or not).
This fixes a case when we incorrectly defined possible promo mode (see
the test payload)
Reviewed By: artempyanykh
Differential Revision: D20948897
fbshipit-source-id: 616b96f96
Summary:
See the comments in the code why it makes logical sense.
This diff is a step forward the state when list of type violations is
independent of the mode (and we use mode solely to decide re: whether to
report or not).
This fixes majority of cases in ModePromotions.java
Reviewed By: artempyanykh
Differential Revision: D20948656
fbshipit-source-id: 82c0d530b
Summary:
Currently we exlude only if the method is based on deprecated config
packages.
Lets use the proper method, which covers both cases (config +
user-defined third party repo).
Reviewed By: artempyanykh
Differential Revision: D20946506
fbshipit-source-id: c3332667f
Summary:
Previously, we learned to detect if Default mode class can be made
Nullsafe(LOCAL).
Lets generalize it and calculate the precise mode.
NOTE 1: We don't distinct shades of "Trust some". We also don't
recommend trust some and recommend "Trust all" instead.
NOTE 2: As you can see from the test payload (see ModePromotions.java),
the precise calculation is not working as expected. This is due to a bug
in nullsafe implementation/design. See follow up diffs that will fix
this test.
Reviewed By: artempyanykh
Differential Revision: D20941345
fbshipit-source-id: 2255359ba
Summary: Consider functions that simply exit as impure by extending the impurity domain with `AbstractDomain.BooleanOr` that signifies whether the program exited.
Reviewed By: skcho
Differential Revision: D20941628
fbshipit-source-id: 19bc90e66
Summary:
This information can be useful for tooling responsible for further
processing (e.g. metric calculation and logging)
Reviewed By: artempyanykh
Differential Revision: D20914583
fbshipit-source-id: 61804d88f
Summary: The heuristics is to find a method in non-abstract sub-classes. See D20647101.
Reviewed By: jvillard
Differential Revision: D20491461
fbshipit-source-id: 759713ef4
Summary:
This diff distinguishes array declaration and size-setting in trace. For example, when there is an
assume statement on an array size, the array size can be pruned to another value. In which case, we
want to see "Set array size" in the trace, instead of "Array declaration".
Reviewed By: jvillard
Differential Revision: D20914930
fbshipit-source-id: 0253fb69e
Summary:
This diff lifts the `PulseAbductiveDomain.t` in `PulseExecutionState` by tracking whether the program continues the analysis normally or exits unusually (e.g. by calling `exit` or `throw`):
```
type exec_state =
| ContinueProgram of PulseAbductiveDomain.t (** represents the state at the program point *)
| ExitProgram of PulseAbductiveDomain.t
(** represents the state originating at exit/divergence. *)
```
Now, Pulse's actual domain is tracked by `PulseExecutionState` and as soon as we try to analyze an instruction at `ExitProgram`, we simply return its state.
The aim is to recover the state at the time of the exit, rather than simply ignoring them (i.e. returning empty disjuncts). This allows us to get rid of some FNs that we were not able to detect before. Moreover, it also allows the impurity analysis to be more precise since we will know how the state changed up to exit.
TODO:
- Impurity analysis needs to be improved to consider functions that simply exit as impure.
- The next goal is to handle error state similarly so that when pulse finds an error, we recover the state at the error location (and potentially continue to analyze?).
Disclaimer: currently, we handle throw statements like exit (as was the case before). However, this is not correct. Ideally, control flow from throw nodes follows catch nodes rather than exiting the program entirely.
Reviewed By: jvillard
Differential Revision: D20791747
fbshipit-source-id: df9e5445a
Summary:
Currenlty the cost issue is printed at the first node of a function, which is usually the first
statment of the function. This may give a wrong impression that the cost of the statement is
changed.
This diff re-locate where to print issues with heuristics. Going backward from the first node
lines, it looks up a line satisfying,
1. A line should start with <fname> or should include " <fname>".
2. The <fname> found in 1 should be followed by a space, '<', '(', or end of line.
Reviewed By: jvillard
Differential Revision: D20766876
fbshipit-source-id: b4fee3180
Summary:
To find a method in non-abstract sub-classes, this diff applies the
same heuristics of inferbo.
* If the class is an interface: Find its unique sub-class and apply the heuristics recursively.
* If the class is an abstract class: Find/use its own summary if possible. If not found, find
one (arbitrary but deterministic) summary from its sub-classes.
* Otherwise: Find its own summary.
Reviewed By: ezgicicek
Differential Revision: D20647101
fbshipit-source-id: 2f8f3ff81
Summary:
Morally, INTERFACE_NOT_THREAD_SAFE is issued when an interface method is invoked from `ThreadSafe`-annotated code on an interface that is not known to be thread-safe or annotated so.
However, the ultimate purpose is to prevent races. Thus it should never be issued on an owned object or on objects we would not report races on for any reason (local variables, non-source variables, etc).
This diff equips interface call records with the abstract address they are invoked on, and uses the same rules for maintaining those records or not.
Reviewed By: skcho
Differential Revision: D20669259
fbshipit-source-id: 6c7841e6a
Summary:
- Model `System.exit()` as early_exit and add a test
- Tweak message of methods that are impure due to having no pulse summary (and add a test)
Reviewed By: skcho
Differential Revision: D20668979
fbshipit-source-id: 6b5589aae
Summary: This diff avoids that an invalid interval value, e.g. [0, -1], is genrated by interval pruning.
Reviewed By: ezgicicek
Differential Revision: D20645488
fbshipit-source-id: 6516c75d1
Summary: The current message is recommending to change `View.findViewById()` to `View.requireViewById()`, but the latter method is not supported in all API, so might lead to a crash in runtime.
Differential Revision: D20619361
fbshipit-source-id: 542746c79
Summary:
- the order of call state was wrong when printing contradiction for CItv
- add a test for impurity
Reviewed By: jvillard
Differential Revision: D20646181
fbshipit-source-id: 1c86fd0a4
Summary:
As exemplified by added tests, pulse computes an empty summary (with 0 disjuncts) whenever it discovers a contradiction which might be caused by:
- discovering aliasing in memory
- widening limited number of times in loops and concluding that loop exit conditions are never taken
However, AFAIU, it is not possible to have a function with 0 disjunct apart from such anomalities. Even a function which does nothing like `void foo(){}` has 1 disjuncts:
```
Pulse: 1 pre/post(s)
#0: PRE:
{ roots={ };
mem ={ };
attrs={ };}
POST:
{ roots={ };
mem ={ };
attrs={ };}
SKIPPED_CALLS: { }
```
The aim of this diff is to consider functions with 0 disjuncts as **impure** because most often such cases are impure, rather than actually pure.
Reviewed By: skcho
Differential Revision: D20619504
fbshipit-source-id: 3a8502c90
Summary:
Although try-with-resource is supported by nullsafe this code pattern
throws it off and make nullsafe report on a virtual **b**yte-**c**ode
variable.
Check out debug output from `TryWithResource` (or attached
visualisation of CFG):
0. node14: $bcvar2=null (on entry to try-with-resource).
1. node16: n$14=$bcvar2, but **also** PRUNE(!(n$14 == null), true). Then we go to
2. node18: do something here and in case of exception go to
3. node25->node23->node19->node20: and here we do
$bcvar2->addSuppressed(...).
Because on step 1 we refined nullability of n$14, but didn't refine
nullability of $bcvar20, on step 3 we are sure that $bcvar is null and
therefore issue an error.
Reviewed By: mityal
Differential Revision: D20558343
fbshipit-source-id: 520505039
Summary:
This is likely not the final refinement, rather one step forward.
We classify all classes by 3 categories:
- Nullsafe and 0 issues
- can add Nullsafe and will be 0 issues
- the rest (class needs improvement)
Each class will fall into exactly one category.
Error messaging is WIP, they are not intended to be surfaced to the user
just yet.
Note how this diff uses the result of the previous refactoring.
Reviewed By: artempyanykh
Differential Revision: D20512999
fbshipit-source-id: 7f462d29d
Summary: Add a flag `is-inclusive-cost` (`true` by default) which computes inclusive cost for each function. Setting the flag to `false` computes exclusive cost of the function where the cost of the callees are assumed to be `0`.
Reviewed By: skcho
Differential Revision: D20558275
fbshipit-source-id: 6b5798916
Summary:
# Problem
Consider
```
some_method(Object a) { a.deref(); }
```
What is nullability of `a` when we dereference it?
Logically, things like "LocallyCheckedNonnull" etc are not applicable
here.
This would be applicable if we called some_method() outside! But not
inside. Inside the function, it can freely treat params as non-null, as
long they are declared as non-nullable.
The best we can capture it is via StrictNonnull nullability.
Reviewed By: artempyanykh
Differential Revision: D20536586
fbshipit-source-id: 5c2ba7f0d
Summary:
`make test` failed in some test directories, because we were getting warnings
```
Foo.java uses unchecked or unsafe operations.
```
This diff fixes or suppresses these warnings.
Reviewed By: skcho
Differential Revision: D20557572
fbshipit-source-id: 63ecd3dfa
Summary:
- Add more naive pulse models for:
- `System.arraycopy`
- `StringBuilder.setLength`
- `StringBuilder.delete`
- Model the following as pure
- `SparseArrayCompat.valueAt`
- `File.get...`
- Add a nice test
Reviewed By: jvillard
Differential Revision: D20513397
fbshipit-source-id: 6d412d13a
Summary:
This diff continues work in D20491716.
This time for Inheritance Rule.
Reviewed By: jvillard
Differential Revision: D20492889
fbshipit-source-id: c4dfd95c3
Summary:
This diff continues work in D20491716.
This time for Dereference Rule.
Reviewed By: jvillard
Differential Revision: D20492296
fbshipit-source-id: ff7f824f9
Summary:
# Problem
In current design, Rules (assignment rule, dereference rule, inheritance
rule) decide, depending on the mode, wether the issue is legit or not.
If the issue is not actionable for the given mode, it won't be created
and registered.
For meta-issues, we want to be able to do smart things like:
- Identify if we can raise strictness of the mode without
introducing new issues
- Classify classes on "clean" vs "broken", taking into account issues
that are currently invisible.
# Solution
In the new design:
1. Rules are issuing violations independently of mode. This makes sense
semantically. Mode is "level of trust we have for suspicious things",
but the thing does not cease to be suspicious in any mode.
2. Each Rule decides if it is reportable or not in a given mode.
3. `nullsafe_mode` is passed to the function `register_error`, that 1)
adds error so it can be recorded in summary for file-level analysis
phase 2) reports some of them to the user.
# This diff
This diff converts only AssignmentRule, follow up will include
conversion of other rules, so no issue encapsutes the mode.
Reviewed By: jvillard
Differential Revision: D20491716
fbshipit-source-id: af17dd66d
Summary:
Previously, at each function call, we added a `WrittenTo` attribute for applying the address of the actuals. However, this results in mistakenly considering each function application that inspects its argument as impure. Instead, we should only propagate `WrittenTo` if the actuals have already `WrittenTo` attributes.
For instance, for the following functions
```
public static boolean is_null(Byte a) {
return a == null;
}
public static boolean call_is_null(Byte a) {
return is_null(a);
}
```
We used to get the following pulse summary for `call_is_null` (showing only one of the disjuncts):
```
#0: PRE:
{ roots={ &a=v1 };
mem ={ v1 -> { * -> v2 } };
attrs={ v1 -> { MustBeValid },
v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) } };}
POST:
{ roots={ &a=v1, &return=v8 };
mem ={ v1 -> { * -> v2 }, v8 -> { * -> v4 } };
attrs={ v2 -> { Arith =null,
BoItv ([max(0, v2), min(0, v2)]),
WrittenTo-----------WRONG },
v4 -> { Arith =1,
BoItv (1),
Invalid ConstantDereference(is the constant 1),
WrittenTo-----------WRONG },
v8 -> { WrittenTo } };}
SKIPPED_CALLS: { }
```
where we mistakenly recorded a `WrittenTo` for `v2` (what `a` points to). As a result, we considered `call_is_null` as impure :( This diff fixes that since the callee `is_null` doesn't have any `WrittenTo` attributes for its parameter `a`. So, we don't propagate `WrittenTo` and get the following summary
```
#0: PRE:
{ roots={ &a=v1 };
mem ={ v1 -> { * -> v2 } };
attrs={ v1 -> { MustBeValid },
v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) } };}
POST:
{ roots={ &a=v1, &return=v8 };
mem ={ v1 -> { * -> v2 }, v8 -> { * -> v4 } };
attrs={ v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) },
v4 -> { Arith =1,
BoItv (1),
Invalid ConstantDereference(is the constant 1) },
v8 -> { WrittenTo } };}
SKIPPED_CALLS: { }
```
Reviewed By: skcho
Differential Revision: D20490102
fbshipit-source-id: 253d8ef64
Summary: These tests fail when seemingly unrelated changes are made to infer. In particular, it seems timeout limits have to be increased by 10x or more to make them succeed again. Disabling until we have a more stable replacement.
Reviewed By: ezgicicek
Differential Revision: D20489647
fbshipit-source-id: 9706b0807
Summary:
This diff naively models the following as `StdVector.push_back`:
- `StringBuilder.append`
- `String.replace`
- `Queue.poll`
It also adds a FN test for `Iterator.next`.
Reviewed By: skcho
Differential Revision: D20469786
fbshipit-source-id: 2d8e8d117
Summary:
This diff is doing three things:
1. Finishes work paved in D20115024, and applies it to nullsafe. In that diff, we hardened API for
file level analysis. Here we use this API in nullsafe, so now we can
analyze things on file-level, not only in proc-level like it was before!
2. Introduces a class-level analysis. For Nullsafe purposes, file is not
an interesting granularity, but we want to analyze a lot of things on
file level. Interesting part here is anonymous classes and how we link
them to their corresponding user-defined classes.
3. Introduces a first (yet to be improved) implementation of class-level
analysis. Namely it is "meta-issues" that tell what is going with class
on high level. For now these are two primitive issues, and we will
refine them in follow up diffs. They are disabled by default.
Follow ups include:
1. Refining semantics of meta-issues.
2. Adding other issues that we could not analyze before or analyzed not
user friendly. Most importantly, we will use it to improve reporting for
FIELD NOT INITIALIZED, which is not very user friendly exactly because
of lack of class-level aggregation.
Reviewed By: artempyanykh
Differential Revision: D20417841
fbshipit-source-id: 59ba7d2e3
Summary: The `FN_loop2` was not actually FN because infer analyzes its complexity as degree 1 correctly.
Reviewed By: dulmarod
Differential Revision: D20468367
fbshipit-source-id: 9e4c19415
Summary: The `iterate_over_mycollection_quad_FN` was not actually FN because infer analyzes its complexity as degree 2 correctly. So, this diff removed `_FN` from there.
Reviewed By: ezgicicek
Differential Revision: D20467398
fbshipit-source-id: b10340612
Summary: There has never been a sufficient formal basis for soundness nor completeness of reports on locals. This diff changes the domain to effectively concern only expressions rooted at formals or globals.
Reviewed By: ezgicicek
Differential Revision: D19769201
fbshipit-source-id: 36ae04d8c
Summary: `Object.clone` modeled as pure until the analysis can distinguish returning a fresh object vs. having no side-effects.
Reviewed By: skcho
Differential Revision: D20439998
fbshipit-source-id: 421054cfb
Summary:
`JavaSplitName` is used to represent Java types (in `Procname` in particular). The type itself is a pair of string (an optional package qualifier) and a "type name" (the quotes are there because it may contain array qualifiers).
For example `java.lang.Object[][]` should be represented as
```
{package=Some "java.lang"; typename="Object[][]"}
```
The constructor `make` was misused to construct instead types such as
```
{package=None; typename="java.lang.Object[][]"}`
```
This is evident when we print the return type of a `Procname` non-verbosely (the default), but we still see the package qualifier.
Obviously this is not just a pretty-printing bug, the values were themselves wrong.
The fix is to use the `of_string` constructor which will parse the package and separate it correctly. Another bug (in response to this one) had to be fixed in `Procname.is_vararg` to maintain behaviour in Nullsafe and Quandary.
Reviewed By: mityal
Differential Revision: D20394146
fbshipit-source-id: 4633902eb
Sungkeun Cho
Jules Villard
Mitya Lyubarskiy
Nikos Gorogiannis
Daiva Naudziuniene
Ezgi Çiçek
Artem Pianykh