Summary:
Found the dead code with the script in the next commit, iteratively until no
warnings remained.
Methodology:
1. I kept pretty-printers for values, which can be useful to use from infer's REPL (or
when printf-debugging infer in general)
2. I kept functions that formed some consistent API (but not often, so YMMV), for instance if it looked like `Set.S`, or if it provides utility functions for stuff in development (mostly the procname dispatcher functions)
3. I tried not to lose comments associated with values no longer exported: if the value is commented in the .mli and not the .ml, I moved the comment
4. Some comments needed updating (not claiming I caught all of those)
5. Sometimes I rewrote the comments a bit when I noticed mis-attached comments
Reviewed By: mbouaziz
Differential Revision: D6723482
fbshipit-source-id: eabaafd
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Don't pass names as strings in clang frontend. Instead use QualifiedCppName which preserves
each identifier of qualified name.
Done by
1. change return type of `Cast_utils.get_qualified_name` to return `QualifiedCppName.t`
2. change types in `Typ.Name.t` and `Typ.Procname.t` to use qualified names where applicable
3. Keep changing the code until it compiles
Reviewed By: jberdine
Differential Revision: D4754242
fbshipit-source-id: 9d723cb
Summary:
It used to be string which:
1. Doesn't have enough information for parametric models
2. Doesn't have good type
Changing this blows up in clang frontend, but I think it's for the better
Reviewed By: jberdine
Differential Revision: D4667633
fbshipit-source-id: 9f61bf1
Summary: `CContext.curr_class` contained information about a class for a method as a string, while it's better to use pointer for this.
Reviewed By: jvillard
Differential Revision: D4666613
fbshipit-source-id: 1c0735b
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary:
This is needed for later: InferClang will no longer be started once for each
source file to be analysed. Instead, it will be called to analyse several files
at once, and will analyse them one by one. Thus, `clang_lang` and `source_file`
are moved to `cFrontend_config` as references.
The biggest change this entailed was the new logging infrastructure, which was
depending on `Config.source_file`. This diff moves the logic entirely to
`Logging`, and changes the API so that executables wishing to log into files
have to set it up using `Logging.set_log_file_identifier`. This can be called
several times during the execution, allowing to dynamically change the log file
(eg, when analysing several source files one by one!).
Reviewed By: jberdine
Differential Revision: D3944148
fbshipit-source-id: 6129090
Summary: That data was never used and removing it can simplify frontends quite a bit.
Reviewed By: jberdine
Differential Revision: D3967389
fbshipit-source-id: d65c3da
Summary:
Class names fragile, easy to break and they introduce another level of indirection.
Since C++ translation doesn't need names, pass decl pointers everywhere.
Doing otherwise will most likely result in assert false.
Handling of class names in objc translation is more involving and it's left
for now. Later, objc can use same mechanism as C++.
Reviewed By: dulmarod
Differential Revision: D3570176
fbshipit-source-id: b957aba
Summary:
Now that array types record only static - and therefore constant -
lengths, Sil typ and exp no longer need to be mutually recursive.
This diff:
- splits the recursion in the type definitions of typ and exp,
- splits the recursion in the comparison and pretty-printing
functions,
- and then refactors typ into a separate module.
Reviewed By: cristianoc
Differential Revision: D3423575
fbshipit-source-id: 6130630
Summary:public
Eliminate the use of the -open Utils command line option passed to the compiler in favor of `open! Utils` in each source file. While slightly convenient, this option causes more headaches than it is worth with other tools e.g. merlin.
Reviewed By: jvillard
Differential Revision: D3168193
fb-gh-sync-id: 4285ef6
fbshipit-source-id: 4285ef6
Summary:public
This will allow us to run translation of more than one function at the same time.
Reviewed By: dulmarod
Differential Revision: D3167965
fb-gh-sync-id: 41e9935
fbshipit-source-id: 41e9935
Summary:public
Revamped Timeout module by storing elapsed wallclock seconds, and the status of symops, in case of recursive calls.
Extended the API with suspend() and resume() to pause and resume the current timeout.
These are used before and after an on-demand call to the analysis functions.
This achieves the effect that each procedure, even though is interrupted, has its own time and symop counters, which are suspended and resumed as required.
Reviewed By: jeremydubreil
Differential Revision: D2976918
fb-gh-sync-id: 0ed1079
shipit-source-id: 0ed1079
Summary:public
I have seen enough comments in this space by people during code review to switch on the analyses the compiler can already do. This diff is an automated renaming of unused identifiers to _, with a few additional changes made when reading the diff of the results for things that stood out as particularly strange. This base-lines all of the existing warnings. I'm not sure this is a good idea, since it might be better for those familiar with each part of the code to look at these warnings and use them as pointers to suspicious code.
Reviewed By: jeremydubreil
Differential Revision: D2938376
fb-gh-sync-id: 6e67817
shipit-source-id: 6e67817
Summary:
public
Add type of return parameter to the context. It allows for better translation
of returnStmt and will be necessary for easy implementation of constructor init lists
Reviewed By: cristianoc
Differential Revision: D2890838
fb-gh-sync-id: e791c3d
Summary:
public
This information will be useful when returning values
Reviewed By: jberdine, jvillard
Differential Revision: D2864864
fb-gh-sync-id: 36da0bb
Summary:
public
Using Typename.t in the list of superclasses to match the type for the key of the type environment. This avoids to make back and forth convertions from typename to type (csu, mangled name).
Depends on D2786574
Reviewed By: jberdine
Differential Revision: D2792116
fb-gh-sync-id: 6100f1a
Summary:
public
Move the naming of types to it own module, so that it can be used by modules `Sil` depends from like `Procname`
Reviewed By: jberdine
Differential Revision: D2773148
fb-gh-sync-id: a89f595
Summary:
public
Move the representation of data-structure into it own module, so that it can be used by modules `Sil` depends from like `Procname`.
Reviewed By: jberdine
Differential Revision: D2772791
fb-gh-sync-id: cda4e3a
Summary:
public This info is based on clang's pointers so it should be more accurate. Also we want to remove the
property map.
Reviewed By: ddino
Differential Revision: D2739487
fb-gh-sync-id: 6be620a
Summary: public Plugin already exports fully qualified name, we don't need
to reconstruct it in ocaml again.
It wasn't used anywhere so this diff shouldn't change any behavior
Reviewed By: dulmarod
Differential Revision: D2668588
fb-gh-sync-id: 1ed1d61
Summary: public
The static and global variables used in blocks don't appear in the ast as captured.
We need them however to try and find retain cycles involving those variables.
This diff adds a way of collecting the static variables used in blocks and treat them
like we treat other captured variables to find retain cycles.
Reviewed By: ddino
Differential Revision: D2663727
fb-gh-sync-id: d5b44ec
Summary: public
modules are better for namespacing.
How I made this diff:
1. moved list_* functions from utils.ml{,i} to iList.ml{,i}
2. shell commands:
grep '^val ' infer/src/backend/iList.mli | cut -f 2 -d ' ' | tr '\n' ' '
# gives a list of former list_ functions that IList implements, fed into the loops below:
LISTNAMES=" compare equal append combine exists filter flatten flatten_options find fold_left fold_left2 for_all for_all2 hd iter iter2 length fold_right map mem nth partition rev rev_append rev_map sort split stable_sort tl drop_first drop_last rev_with_acc remove_duplicates remove_irrelevant_duplicates merge_sorted_nodup intersect mem_assoc assoc map2 to_string"
# replace " list_*" function calls with IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/ list_$i\b/ IList.$i/g" \{\} \; ; done
# replace (list_* functions with (IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/(list_$i\b/(IList.$i/g" \{\} \; ; done
# ditto with [
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/\[list_$i\b/[IList.$i/g" \{\} \; ; done
3. Then fix up the rest by hand. In particular, stuff that called Utils.list_*
explicitely, and stuff that used the "Fail" exception that has moved to
IList. (may revisit this in the future)
Reviewed By: jeremydubreil, cristianoc
Differential Revision: D2550241
fb-gh-sync-id: cd64b10
Summary: @public
This removes the old way of finding variable declarations to create sil variables and replaces it with
a a new way based on the map from pointers to declarations.
Basically, every variable dereference contains a pointer to the variable declaration, with that we can
build the corresponding sil variable.
Reviewed By: @akotulski
Differential Revision: D2536000
fb-gh-sync-id: dd29cf9
Jules Villard
Josh Berdine
Daiva Naudziuniene
Andrzej Kotulski
Cristiano Calcagno
Dulma Churchill
Sam Blackshear
jrm