Summary: There was no option to trigger this checker so it was not possible to enable it when not running the default list of checkers
Reviewed By: jberdine
Differential Revision: D5057088
fbshipit-source-id: 7af36f5
Summary: The issues that are not reported by default are all experimental issues from the biabduction analysis. In that case, it is easier to use a blacklist of errors to filter out so that the issues found by the checkers based on the AI framework can be reported by default without having to add them to the whitelist.
Reviewed By: jvillard
Differential Revision: D5051327
fbshipit-source-id: 2a93b11
Summary:
Introduce `infer-<command>` for each command, except for internal commands
(only `infer-clang` for now) which are not exported. Install these executables
(which are just symlinks to `infer`) on `make install`. The main executable
looks at the name it was invoked with to figure out if it should behave as a
particular command.
Get rid of `InferClang`, `InferAnalyze`, and `InferPrint`. As a bonus, we now
only need to build one executable: `infer`, which should be a few seconds
faster (less link time).
`InferAnalyze` is now `infer-analyze` and `InferPrint` is `infer-print`. To run
`InferClang`, use a symlink named `clang`, `clang++`, etc. to `infer`. There
are such symlinks available in "infer/lib/wrappers/" already.
I also noticed that the scripts in xcodebuild_wrappers/ don't seem useful
anymore, so use wrappers/ instead, as for `make`.
Reviewed By: mbouaziz
Differential Revision: D5036495
fbshipit-source-id: 4a90030
Summary:
`infer clang ...` was not being handled correctly and would error incorrectly.
Small fix before bigger change.
Reviewed By: mbouaziz
Differential Revision: D5036447
fbshipit-source-id: 87fcc40
Summary: It's useful to have all the options in a single man page for discoverability.
Reviewed By: mbouaziz
Differential Revision: D5028007
fbshipit-source-id: 37f8d2e
Summary:
Allows one to dump the manuals in various formats:
- plain: plain text
- pager: default, display the man page in all its glory inside a pager
- groff: the source code of the man page
- auto: pager or plain
Reviewed By: mbouaziz
Differential Revision: D5027636
fbshipit-source-id: 3b97edc
Summary:
Glorious, glorious man pages.
This changes a bunch of things that were hard to break up from the diff, so the
resulting diff is big.
Use `Cmdliner.Manpage` to format man pages (and also format a bit ourselves
since it is so stubborn).
As a bonus, introduce the following subcommands:
```
infer run ... # same as default mode with -- before
infer capture ... # -a capture
infer compile ... # -a compile
infer analyze ... # InferAnalyze
infer report ... # InferPrint
infer diff ... # this one is not new
infer clang ... # InferClang, not that you should use it
```
The man pages can still be improved a lot. Notable missing sections:
`ENVIRONMENT`, stuff about .inferconfig, some example usage, `DESCRIPTION`, ...
Reviewed By: jberdine
Differential Revision: D4921083
fbshipit-source-id: 9602230
Summary:
Ran the build with -w,-32 , delete code, repeat, until a fixpoint of no more warnings is reach.
Unfortunately we cannot fatal on w32 because ppx_compare can generate dead code (eg `compare_t` and only `compare` is used).
Reviewed By: mbouaziz
Differential Revision: D4945800
fbshipit-source-id: c95afb6
Summary:
The bufferoverrun checkers can now be run with:
infer -a checkers --bufferoverrun -- ...
Reviewed By: jeremydubreil
Differential Revision: D5010689
fbshipit-source-id: 2eaa396
Summary:
The Siof checkers can now be run with:
infer -a checkers --siof -- ...
and also runs by default using:
infer -a checkers -- ...
Reviewed By: jberdine
Differential Revision: D5009731
fbshipit-source-id: e0e2168
Summary:
First step to be able to enable and disable the checkers to run in the following form:
> infer -a checkers --checker1 --checker2 --checker3 -- ...
and have a predefined list of checkers that are run by default with:
> infer -a checkers -- ...
Reviewed By: sblackshear
Differential Revision: D5007377
fbshipit-source-id: d7339ef
Summary:
This gives the option to run the biabduction analysis together with the other Clang-based checkers with the command:
infer -a checkers --biabduction -- ...
The filtering does not work yet because the filtering for the biabduction analysis matches the analyzer `Infer`, and does not filter much when the analyzer is `Checkers`, which is the case here.
Reviewed By: sblackshear
Differential Revision: D4773834
fbshipit-source-id: 16300cc
Summary: Sometimes reports need traces to be fully understood, but sometimes reporting where the exception takes place can save time to developers.
Reviewed By: jvillard
Differential Revision: D4914037
fbshipit-source-id: 039ab63
Summary: This is necessary to create a `report` subcommand (see later diffs).
Reviewed By: jberdine, dulmarod
Differential Revision: D4937488
fbshipit-source-id: 3fec0b5
Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary:
OCaml 4.04.0 new warnings raised a few valid points!
Fixing warning 57 in two ways:
- best way: introduce an auxiliary function to avoid code duplication
- not-so-best way: introduce code duplication. I did that when the branches body are small. Typically the number of bound variables in the pattern is high, so an auxiliary function would need to take many arguments and the whole thing will not be readable (we'd still duplicate the arguments we pass to the function for instance).
Reviewed By: jberdine
Differential Revision: D4851006
fbshipit-source-id: fbf1867
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary:
- Do not print OCaml backtrace unless in developer mode.
- Print javac output when it fails.
- Refactor Javac.ml so that rerunning the command doesn't duplicate code.
The output of the clang and Javac integration is good, the output for mvn is
ok, the output for Buck is still fairly "meh".
Reviewed By: jberdine
Differential Revision: D4818722
fbshipit-source-id: 1973b93
Summary:
Currently --per-procedure-parallelism defaults to a chunk size of 1
procedure, which has a high overhead. Add a command line option to
control it, and raise the default value.
Reviewed By: jvillard
Differential Revision: D4794692
fbshipit-source-id: 7715a40
Summary:
This checker was always running by default but was apparently never reporting.
This checkers can always be run using:
infer -a checkers --checkers-repeated-calls -- ...
Reviewed By: sblackshear
Differential Revision: D4782472
fbshipit-source-id: 5ec77f4
Summary:
All tests were redirecting `stderr` into duplicates.txt which made it much harder to see other error messages in stderr (such as uncaught exceptions).
To mitigate it, write duplicates to separate file and don't redirect `stderr` to another file.
Reviewed By: jvillard
Differential Revision: D4728938
fbshipit-source-id: 8ad2fc8
Summary:
Two issues in the previous code:
1. We'd just tack on `#compilation-database` so if there already are `#flavors`
in a Buck target then we get a malformed `#flavors#compilation-database`
instead of `#flavors,compilation-database`. There's already code to deal
with that for other flavors (`#infer-capture-all`), so extend and reuse that.
2. The code didn't work if there are spaces in target names (sigh). Harden the
code a bit so that it works. Unfortunately Buck doesn't escape spaces at all
in its `buck targets --show-output` output, so the parsing still relies on
there being no spaces in flavors to work correctly. Sample output:
```
$ buck targets --show-full-output //clang_compilation_database:Hel\ lo#compilation-database
Not using buckd because watchman isn't installed.
[+] PROCESSING BUCK FILES...0.1s [100%] 🐳 New buck daemon
//clang_compilation_database:Hel lo#compilation-database /home/jul/infer/infer/tests/build_systems/codetoanalyze/buck-out/gen/clang_compilation_database/__Hel lo#compilation-database.json
```
Also, some code in codetoanalyze/clang-compilation-database/ didn't compile, so
fix that.
Reviewed By: dulmarod
Differential Revision: D4714338
fbshipit-source-id: b8ae324
Summary:
These are mentioned on fbinfer.com so IMHO should be displayed when running infer -h
Closes https://github.com/facebook/infer/pull/617
Differential Revision: D4697682
Pulled By: jvillard
fbshipit-source-id: 3d7dd7b
Summary:
It is definitely useful to collect information about how long the analysis of every procedure takes. It allows to detect and focus on outliers when trying to improve performance. However, this kind of information could be collected using a standard logging mechanism and does not need to be stored within the analysis artifacts.
I intend to add some form of similar logging in the context of #16348004 once we can get every analysis procedure analyzed through the `Ondemand` module. In this case, it would be easy to have a single place to log how does the analysis of a procedure take.
Reviewed By: jberdine
Differential Revision: D4636755
fbshipit-source-id: 01f3bca
Summary:
This option is not needed anymore as it was introduced to counter an uncovered
perf issue with creating human readable reports. The perf issue has been
addressed.
Instead of this option, one can use `infer --report-hook /bin/true ...` to
disable reporting. However, right now the Buck integration doesn't honor it so
this would need to be fixed to be a true equivalent of `--disable-bug-list`.
Reviewed By: jberdine
Differential Revision: D4712877
fbshipit-source-id: a09304f
Summary:
We want to stop supporting '-multiletter' options altogether in the future as
they are not standard.
For boolean switches, we used to have '-short' for true and '-nshort' for
false, but that second form is necessarily > 1 letters, which doesn't work in
this scheme. Replace these by '-s' for true and '-S' for false.
Reviewed By: jberdine
Differential Revision: D4674079
fbshipit-source-id: 95bacfe
Summary:
Add a new command-line option `--per-procedure-parallelism`, to change the granularity of parallelism of the analysis from file to procedure.
This is intended for `--reactive` mode where e.g. a single file is changed and the analysis currently uses just one core.
When the option is used, the Makefile mechanism is replaced by using forking instead.
The parent process does as little allocation as possible, to avoid taxing the kernel.
Caveats:
- Not active in Java, (issues with camlzip).
- Not active in checkers, yet.
Example use:
```
infer --reactive --changed-files-index index.txt --per-procedure-parallelism -- analyze
```
Reviewed By: jberdine
Differential Revision: D4634884
fbshipit-source-id: e358c18
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
All intermediate `.exp` files used for tests can be generated with custom info, based on what is needed for the tests purposes.
This customisation happens via command-line argument `--issues-fields`.
Reviewed By: cristianoc, jvillard
Differential Revision: D4628062
fbshipit-source-id: feaa382
Jeremy Dubreil
Jules Villard
Mehdi Bouaziz
Sam Blackshear
Martino Luca
Dulma Churchill
Andrzej Kotulski
Josh Berdine
Matthew Haughton
Cristiano Calcagno