Summary:
There's a lot of code for building up and moving around `Tags`.
When working on cleaning up some of the `Errlog` code, I noticed that `Tags` were included in the JSON and wondered why.
The answer is suprisingly just one thing: only the line tags get used, and even then they are only used to decide what frame to select as the start frame for the trace (i.e., the one that is highlighted first).
That seems like overkill; starting on trace on the actual line where the error occurs, starting at the beginning of the procedure where the error occurs, or starting at the first line of the trace all seem equally reasonable.
If we are happy with any of these alternatives, we can kill `Tags` altogether and potentially save a decent amount space in our JSON artifacts.
Reviewed By: mbouaziz
Differential Revision: D6876752
fbshipit-source-id: 1580127
Summary: Use the Hashtbl functions directly as `Cfg` knows that a cfg is a hashtbl.
Reviewed By: sblackshear, jeremydubreil
Differential Revision: D6727732
fbshipit-source-id: 2cdda91
Summary:
Found the dead code with the script in the next commit, iteratively until no
warnings remained.
Methodology:
1. I kept pretty-printers for values, which can be useful to use from infer's REPL (or
when printf-debugging infer in general)
2. I kept functions that formed some consistent API (but not often, so YMMV), for instance if it looked like `Set.S`, or if it provides utility functions for stuff in development (mostly the procname dispatcher functions)
3. I tried not to lose comments associated with values no longer exported: if the value is commented in the .mli and not the .ml, I moved the comment
4. Some comments needed updating (not claiming I caught all of those)
5. Sometimes I rewrote the comments a bit when I noticed mis-attached comments
Reviewed By: mbouaziz
Differential Revision: D6723482
fbshipit-source-id: eabaafd
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary:
This diff adds a layer of report deduplication logic in addition to
the existing scheme.
Suppose issue 1 with trace1a and trace1b, and issue 2 with trace2a and
trace2b. If trace1a ends at the same location as trace2a (resp.,
trace2b) and trace1b ends at the same location as trace2b (resp.,
trace2a), then consider issues 1 and 2 to be duplicates.
This chooses to report the issue with the smaller sum of trace
lengths, breaking ties using the issue hashes, and eventually the
entire issue. Therefore there is a potential for flakiness with
respect the the choice of which report to make within a
hash-equivalence class.
Reviewed By: sblackshear
Differential Revision: D6519607
fbshipit-source-id: 63210ab
Summary:
Deduping issues when generating a single report and then diffing the
reports can lead to introduced issues being considered duplicates of
existing issues.
Reviewed By: sblackshear
Differential Revision: D6414673
fbshipit-source-id: bba81fd
Summary: This information is already available in the procedure name.
Reviewed By: jeremydubreil, jvillard
Differential Revision: D6119459
fbshipit-source-id: f07bfde
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
This diff takes the first step toward a more general filtering
system. This step is concerned only with filtering at the reporting
stage, filtering for the capture and analysis stages is left for
later.
This diff adds a new command line / config option
```
--filter-report +string
Specify a filter for issues to report. If multiple filters are
specified, they are applied in the order in which they are
specified. Each filter is applied to each issue detected, and only
issues which are accepted by all filters are reported. Each filter
is of the form:
`<issue_type_regex>:<filename_regex>:<reason_string>`. The first
two components are OCaml Str regular expressions, with an optional
`!` character prefix. If a regex has a `!` prefix, the polarity is
inverted, and the filter becomes a "blacklist" instead of a
"whitelist". Each filter is interpreted as an implication: an issue
matches if it does not match the `issue_type_regex` or if it does
match the `filename_regex`. The filenames that are tested by the
regex are relative to the `--project-root` directory. The
`<reason_string>` is a non-empty string used to explain why the
issue was filtered.
See also infer-report(1) and infer-run(1).
```
Reviewed By: jvillard
Differential Revision: D6182486
fbshipit-source-id: 9d3922b
Summary:
In a summary, you never want to see a trace where non-footprint sources flow to a sink.
Such a trace is useless because nothing the caller does can make more data flow into that sink.
Reviewed By: jeremydubreil
Differential Revision: D5779983
fbshipit-source-id: d06778a
Summary: A stepping stone to have descriptive issue types for each kind of flow rather that lumping everything into `QUANDARY_TAINT_ERROR`.
Reviewed By: mbouaziz
Differential Revision: D6126690
fbshipit-source-id: a7230c0
Summary:
Before this change, analyses using HIL needed to pass `IdAcessPathMapDomain.empty` to abstract interpreter, and would get back the map as part of the post.
This is a confusing API and was a pain point for Dino in trying to use HIL.
This diff adds a HIL wrapper around the abstract interpreter that hides these details.
It replaces `LowerHIL.makeDefault` as the new "simplest possible way" to use HIL.
Reviewed By: jberdine
Differential Revision: D6125597
fbshipit-source-id: 560856b
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Expanding traces currently works in the following way:
Given a `TraceElem.Kind` `k` we want to report in `foo`, we look for a callee `C` of `foo` that has a `TraceElem.Kind` equal to `k` in its summary, grab the summary for `C`, then repeat until we bottom out.
This isn't very flexible: it insists on equality between `TraceElem.Kind`'s as the criteria for expanding a trace.
This diff introduces a new `matches` function for deciding when to expand a trace from a caller into a callee.
Clients that don't want strict equality can implement a fuzzier kind of equality inside this function.
I've gone ahead and done this for the trace elemes of thread-safety.
In the near future, equivalent access paths won't always compare equal from caller to callee, so we want to match their suffixes instead.
Reviewed By: jvillard
Differential Revision: D5914118
fbshipit-source-id: 233c603
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary: It's useful to be able to configure both max depth and max width
Reviewed By: jeremydubreil
Differential Revision: D5801567
fbshipit-source-id: 0138cd7
Summary:
We supported globals as sources before, but we did so by allowing ClangTrace etc. to match against any access path in the footprint of the trace.
This is very powerful/flexible, but it's ultimately not a good idea because it leads to traces that are hard to read.
This is because a footprint source doesn't have any information about its provenance: we might know that the value came from a global, but we don't know where the read occurred.
The mechanism for handling procedure calls as sources already knows how to solve this problem.
This diff implements globals as sources as a special case of procedure call sources instead.
This will give us much nicer traces with full provenance of the read from the global.
Reviewed By: mbouaziz
Differential Revision: D5772299
fbshipit-source-id: 491ae81
Summary:
Calling `Exn.backtrace` doesn't give us the current backtrace, only the one of
the latest exception raised. Change the logic of toplevel exception catching to
print the right backtrace.
Also, do not use `Format` to print from `Config` as `Logging` may have messed
with it already.
Finally, throw in some colours!
Reviewed By: jberdine
Differential Revision: D5764825
fbshipit-source-id: cd51688
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary:
I'm working on parameterizing access trees with a config that will limit max depth + perhaps width if needed.
This is a stepping stone to enforcing max depth.
Reviewed By: jvillard
Differential Revision: D5693453
fbshipit-source-id: c15b0ee
Summary:
We now represent the footprint with an access trie, so this code is no longer required.
This lets us simplify things a bit
Reviewed By: jberdine
Differential Revision: D5664484
fbshipit-source-id: c35edf2
Summary:
In looking at summaries that Quandary took a long time to compute, one thing I notice frequently is redundancy in the footprint sources (e.g., I might see `Footprint(x), Footprint(x.f), Footprint(x*)`).
`sudo perf top` indicates that joining big sets of sources is a major performance bottleneck, and a large number of footprint sources is surely a big part of this (since we expect the number of non-footprint sources to be small).
This diff addresses the redundancy issue by using a more complex representation for a set of sources. The "known" sources are still in a set, but the footprint sources are now represented as a set of access paths (via an access trie).
The access path trie is a minimal representation of a set of access paths, so it would represent the example above as a simple `x*`.
This should make join/widen/<= faster and improve performance
Reviewed By: jberdine
Differential Revision: D5663980
fbshipit-source-id: 9fb66f8
Summary:
The previous widening operator added stars to the *end* of paths that existed in `next` but not `prev`. This is not enough to ensure termination in the case where the trie is growing both deeper and wider at the same time.
The newly added test demonstrates this issue. In the code, there's an ever-growing path of the form `tmp.prev.next.prev.next...` that wasn't summarized by the previous widening operator. The new widening is much more aggressive: it replaces *any* node present in `next` but not `prev` with a `*` (rather than trying to tack a star onto the end). This fixes the issue.
This issue was causing divergence on tricky doubly-linked list code in prod.
Reviewed By: jeremydubreil
Differential Revision: D5665719
fbshipit-source-id: 1310a92
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
Record the list of access paths (if any) used in the index expression for each array access.
This will make it possible to use array accesses as sinks in Quandary
Reviewed By: jeremydubreil
Differential Revision: D5531356
fbshipit-source-id: 8204909
Summary:
It's nice to have "raw" as the default kind of access path, since it's used much more often than the abstraction.
This is also a prereq for supporting index expressions in access paths, since we'll need mutual recursion between accesses and access paths.
Reviewed By: jeremydubreil
Differential Revision: D5529807
fbshipit-source-id: cb3f521
Summary: This seems more in line with the expectations of the JSON format.
Reviewed By: mbouaziz
Differential Revision: D5500939
fbshipit-source-id: 76dcc47
Summary: This gives us more expressive power when defining sources--we can use heuristics like "`foo(o)` only returns a source when `o` is not a constant".
Reviewed By: jvillard
Differential Revision: D5467935
fbshipit-source-id: f3d581d
Summary: Long lists will be broken into lines rather than stretch out on a single line.
Reviewed By: jvillard
Differential Revision: D5424323
fbshipit-source-id: 115f16a
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Once the fixed/preexisting/introduced sets have been computed, they endure
further filtering which may decide that more of them are equal. These bugs just
get dropped on the floor. Put these into preexisting as well instead, at least
in the case of the "skip_duplicated_types_on_filenames" filter.
Reviewed By: martinoluca
Differential Revision: D5274248
fbshipit-source-id: 99b3f3d
Summary: This change introduces the a new argument that lets you restrict the results of a differential report to only certain files.
Reviewed By: mbouaziz
Differential Revision: D5236626
fbshipit-source-id: 52711e9
Summary:
First step toward addressing bad traces that happen in examples like
```
void sourceMethod() {
Obj source = (Obj) InferTaint.inferSecretSource();
callSameSink(null, source); // index: 1
}
void callSameSink(Obj o1, Obj o2) {
callMySink1(o1); // flows via o1 ~= index 0, don't expand
callMySink2(o2); // flows via o2 ~= index 1, can expand
}
void callMySink1(Obj o) {
... // maybe interesting something happens here that doesn't happen in callMySink2
InferTaint.inferSensitiveSink(o); // flows via o ~= index 0, can expand
}
void callMySink2(Obj o) {
InferTaint.inferSensitiveSink(o); // flows via o ~= index 0, can expand
}
```
The issue is that when we recreate a trace to the sink starting from `sourceMethod`, we don't know which of the calls to `callMySink` to expand/include in the trace.
If we expand the call to `callMySink(o1)`, we'll get a bogus trace.
In this example that's not such a big deal, but imagine the case where the first call to `callMySink` is a different function that transitively calls the sink through some long and confusing path.
Remembering the index at which taint flows into each sink will let us choose which sinks are safe to expand.
This diff just adds indexes to the API; it's not actually propagating the index info or using it during expansion yet.
Reviewed By: jeremydubreil
Differential Revision: D5170563
fbshipit-source-id: ba4b096
Summary: We were almost always using `~report_reachable:true`, and in the cases where we weren't it is fine to do so. In general, a sink could read any state from its parameters, so it makes sense to complain if anything reachable from them is tainted.
Reviewed By: mbouaziz
Differential Revision: D5169067
fbshipit-source-id: ea7d659
Summary: Have found this useful in Quandary for fbcode, where we want to do this for folly due to its use of assembly (details in comments).
Reviewed By: mbouaziz
Differential Revision: D5167564
fbshipit-source-id: bf6d7e0
Summary:
For now, we just support clearing the taint on a return value.
Ideally, we would associate a kind with the sanitizer and only clear taint that matches that kind.
However, it's fairly complicated to make that work properly with footprint sources.
I have some ideas about how to do it with passthroughs instead, but let's just do the simple thing for now.
Reviewed By: jeremydubreil
Differential Revision: D5141906
fbshipit-source-id: a5b8b5e
Summary:
An array has a static or dynamic length (number of elements), but it also has a
stride, determined by the type of the element: `sizeof(element_type)`. We don't
have a good `sizeof()` function available on SIL types, so record that stride
in the array type.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D4969697
fbshipit-source-id: 98e0670
Summary:
Glorious, glorious man pages.
This changes a bunch of things that were hard to break up from the diff, so the
resulting diff is big.
Use `Cmdliner.Manpage` to format man pages (and also format a bit ourselves
since it is so stubborn).
As a bonus, introduce the following subcommands:
```
infer run ... # same as default mode with -- before
infer capture ... # -a capture
infer compile ... # -a compile
infer analyze ... # InferAnalyze
infer report ... # InferPrint
infer diff ... # this one is not new
infer clang ... # InferClang, not that you should use it
```
The man pages can still be improved a lot. Notable missing sections:
`ENVIRONMENT`, stuff about .inferconfig, some example usage, `DESCRIPTION`, ...
Reviewed By: jberdine
Differential Revision: D4921083
fbshipit-source-id: 9602230
Summary: A lot of C++ library functions look like this, so it's important to have.
Reviewed By: mbouaziz
Differential Revision: D5026082
fbshipit-source-id: 6f421b6
Summary: Stops Quandary errors from getting dropped on the floor when it runs alongside the other checkers.
Reviewed By: jeremydubreil
Differential Revision: D5010801
fbshipit-source-id: 2847f61
Summary:
Ran the build with -w,-32 , delete code, repeat, until a fixpoint of no more warnings is reach.
Unfortunately we cannot fatal on w32 because ppx_compare can generate dead code (eg `compare_t` and only `compare` is used).
Reviewed By: mbouaziz
Differential Revision: D4945800
fbshipit-source-id: c95afb6
Summary:
Last step for converting thread-safety and quandary to HIL.
Push the logic for managing the id map and converting the instructions into a functor.
This way, client analyses can simply write HIL transfer functions and call the functor.
Reviewed By: jberdine
Differential Revision: D4989987
fbshipit-source-id: 485169e
Summary:
Went through the trouble of killing these warnings, make sure they do not creep
up again in the future.
Reviewed By: mbouaziz
Differential Revision: D4937493
fbshipit-source-id: 0e2eda4
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary:
Split Fieldname.t into `Java` and `Clang`. Each of them have different naming conventions and this way it's easier to differentiate between them.
Make `Java` variant store string instead of mangled since mangled part was always empty
Changes to `Clang` variant are coming in the next diff
Reviewed By: jeremydubreil
Differential Revision: D4746708
fbshipit-source-id: c5858a8
Summary: Add `QualifiedCppName.t` and some functions to manipulate it. More places will start using this type (such as `Procnames` or `Typ.Name`) in later diff
Reviewed By: jberdine
Differential Revision: D4738991
fbshipit-source-id: 8f20dd6
Summary: Fail early when there is no registered callbacks to run the analysis of a procedure on-demand
Reviewed By: sblackshear
Differential Revision: D4573726
fbshipit-source-id: a8ee74b
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
Reimplement whitelists as a match against a single regexp. This allows one to
precompile the whitelist regexp to make fast check against a whitelist of fuzzy
qualifiers, instead of checks linear in the number of items in the whitelist.
Reviewed By: akotulski
Differential Revision: D4588278
fbshipit-source-id: 3bac614
Summary:
This is useful to make sure `./build-infer.sh clang` and `./build-infer.sh
java` work correctly.
I had to move one unit test inside a new unit/clang/ directory used only if clang is enabled, and create a stub for it in unit/clang_stubs/ for when clang is disabled.
Renamed `OCAML_SOURCES` to the more consistent and descriptive `OCAML_CONFIG_SOURCES`.
Reviewed By: jeremydubreil
Differential Revision: D4571997
fbshipit-source-id: 9502114
Summary:
We waste a lot of space storing the types of field accesses and comparing them sets/maps with access paths.
Yet almost none of the code ever looks at these types (only a tiny piece of code in thread-safety).
If we know the base type, we have enough information to recover the type of the field.
Let's do that instead.
Reviewed By: jeremydubreil
Differential Revision: D4567996
fbshipit-source-id: e7fd2da
Summary: Being forced to separately define `pp_element`/`pp_key` is uneccessary and makes it more cumbersome to create a set/map from an existing module that already defines `pp`.
Reviewed By: jeremydubreil
Differential Revision: D4517308
fbshipit-source-id: 9b17c9c
Summary:
At one point I thought we'd want to have lots of different schedulers for things like exploring loops in different orders, but that hasn't materialized.
Let's make the common use-case simpler by hiding the `Scheduler` parameter inside the `AbstractInterpreter` module.
We can always expose `MakeWithScheduler` later if we want to.
Reviewed By: jberdine
Differential Revision: D4508095
fbshipit-source-id: 726e051
Summary:
When the receiver type and return type of an unknown call are the same, propagate taint to both the receiver and the return type.
This does the right thing for common "builder-style" methods that both update and return the receiver.
We already had custom models for a few such methods (e.g., `StringBuilder.append`), but we can remove them now.
Reviewed By: jeremydubreil
Differential Revision: D4490071
fbshipit-source-id: 325ea88
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Jeremy Dubreil
Sam Blackshear
Mehdi Bouaziz
Josh Berdine
Sungkeun Cho
Jules Villard
Dulma Churchill
Andrzej Kotulski
Martino Luca
Cristiano Calcagno
Kihong Heo