|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, band_constant_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 1 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, band_negative_Bad, 8, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Unknown value from: unknown_function,Assignment,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 2] Size: 2]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, band_negative_constant_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 1 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, band_positive_Bad, 6, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 8] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, band_positive_constant_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 2 Size: 2]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, call_scan_hex2_Good_FP, 2, BUFFER_OVERRUN_L4, no_bucket, ERROR, [Array declaration,Call,<Length trace>,Parameter `cp`,Array access: Offset: [0, +oo] Size: 4 by call to `scan_hex_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, call_scan_hex2_Good_FP, 2, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [Call,<LHS trace>,Parameter `cp`,Assignment,Binary operation: ([58, 97] - 87):unsigned64 by call to `scan_hex_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, call_scan_hex2_Good_FP, 2, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [Call,<LHS trace>,Parameter `cp`,Assignment,Binary operation: ([58, 97] - 97):unsigned64 by call to `scan_hex_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, call_scan_hex2_Good_FP, 2, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [Call,<LHS trace>,Parameter `cp`,Assignment,Binary operation: ([0, 97] - 48):unsigned64 by call to `scan_hex_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, call_scan_hex_Good_FP, 2, BUFFER_OVERRUN_L4, no_bucket, ERROR, [Array declaration,Call,<Length trace>,Parameter `cp`,Array access: Offset: [0, +oo] Size: 2 by call to `scan_hex_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, call_scan_hex_Good_FP, 2, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [Call,<LHS trace>,Parameter `cp`,Assignment,Binary operation: (0 - 48):unsigned64 by call to `scan_hex_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, call_two_safety_conditions2_Bad, 1, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [Call,<LHS trace>,Call,Assignment,Assignment,<RHS trace>,Parameter `s`,Binary operation: ([0, +oo] + 15):unsigned32 by call to `two_safety_conditions2_Bad` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, div_const2_FP, 3, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Offset trace>,Parameter `n`,Assignment,<Length trace>,Array declaration,Array access: Offset: [-oo, +oo] Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, div_const_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 2 Size: 2]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, do_not_prune_float_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, do_not_prune_float_Good_FP, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, integer_overflow_by_addition_Bad, 4, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,<RHS trace>,Assignment,Binary operation: (2000000000 + 2000000000):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, integer_overflow_by_addition_Bad, 5, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, integer_overflow_by_addition_l2_Bad, 7, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [<LHS trace>,Assignment,<RHS trace>,Assignment,Binary operation: ([0, 2000000000] + [0, 2000000000]):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, integer_overflow_by_multiplication_Bad, 4, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,<RHS trace>,Assignment,Binary operation: (300000 × 300000):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, integer_overflow_by_multiplication_Bad, 5, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, integer_overflow_by_subtraction_Bad, 4, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,<RHS trace>,Assignment,Binary operation: (-2000000000 - 2000000000):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, integer_overflow_by_subtraction_Bad, 5, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, minmax_div_const_Bad, 3, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: [0, 8] Size: 7]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, minus_minimum_Bad, 2, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: (0 - -9223372036854775808):signed64]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, minus_one_Bad, 3, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [<LHS trace>,Unknown value from: unknown_uint,Assignment,Binary operation: ([0, +oo] - 1):unsigned64]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, modulo_signed_Bad, 2, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Parameter `i`,<Length trace>,Array declaration,Array access: Offset: [-4, 4] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, modulo_signed_neg_Bad, 2, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Parameter `i`,<Length trace>,Array declaration,Array access: Offset: [-4, 4] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, muliply_two_Bad, 2, INTEGER_OVERFLOW_U5, no_bucket, ERROR, [<LHS trace>,Unknown value from: unknown_uint,Assignment,Binary operation: ([-oo, +oo] × 2):unsigned64]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, mult_minimum_Bad, 2, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: (-1 × -9223372036854775808):signed64]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, plus_linear_min2_Good_FP, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 14] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, plus_linear_min3_Good_FP, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 25] Size: 20]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, plus_linear_min_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 19] Size: 19]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, plus_one_Bad, 3, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [<LHS trace>,Unknown value from: unknown_int,Assignment,Binary operation: ([-oo, 9223372036854775807] + 1):signed64]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, ptr_band1_Bad, 9, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, ptr_band2_Bad, 10, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, recover_integer_underflow_Bad, 3, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([-oo, 9] - 2):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, recover_integer_underflow_Good_FP, 3, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([0, 9] - 1):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, scan_hex_Good, 2, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, scan_hex_Good, 8, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, shift_right_zero_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 1 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, simple_overflow_Bad, 0, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [Binary operation: (85 × 4294967295):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, two_safety_conditions2_Bad, 9, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Call,Assignment,Assignment,<RHS trace>,Assignment,Binary operation: ([0, +oo] + [0, 80]):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, unused_integer_underflow2_Bad, 2, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: (0 - 1):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, unused_integer_underflow2_Good_FP, 2, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: (0 - 1):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, unused_integer_underflow_Bad, 2, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, unused_integer_underflow_Bad, 2, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: (0 - 1):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, unused_integer_underflow_Good_FP, 2, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, unused_integer_underflow_Good_FP, 2, INTEGER_OVERFLOW_L1, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: (0 - 1):unsigned32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, use_int64_max_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 15 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/arith.c, use_uint64_max_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 15 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, call_literal_string_parameter1_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Call,<Offset trace>,Parameter `s`,<Length trace>,Array declaration,Array access: Offset: [0, 112] Size: 112 by call to `literal_string_parameter` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, call_literal_string_parameter2_Bad, 0, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Call,<Offset trace>,Parameter `s`,<Length trace>,Array declaration,Array access: Offset: [0, 112] Size: 112 by call to `literal_string_parameter` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, fgets_may_not_change_str_Bad, 9, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: [0, 5] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, fgets_may_not_change_str_Good_FP, 9, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: [4, 9] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, fgets_null_check_Bad, 3, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: [-1, 97] Size: 100]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, fgets_null_check_Bad, 3, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [<LHS trace>,Array declaration,Binary operation: ([1, 99] - 2):unsigned64]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, literal_string2_Good, 4, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, literal_string2_bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: [0, 111] Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, literal_string_Good, 4, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, literal_string_bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: [0, 111] Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, strlen_constant_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, strlen_malloc_2_Good_FP, 9, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, strlen_malloc_Bad, 9, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, strong_update_malloc_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, weak_update_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 15 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, weak_update_Good_FP, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 15] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, weak_update_malloc_Bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_content.c, weak_update_malloc_Good_FP, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_dynlength.c, init_variable_array, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Parameter `len`,<Length trace>,Parameter `len`,Array declaration,Array access: Offset: 3⋅len + 1 Size: 3⋅len + 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_field.c, array_field_access_Bad, 4, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Parameter `y.f[*]`,<Length trace>,Array declaration,Array access: Offset: [min(20, y.f[*]), max(20, y.f[*])] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_field.c, decreasing_pointer_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Parameter `x->f[*]`,Assignment,Assignment,Assignment,Array access: Offset: -1 Size: 2]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_multidim.c, multidim_arr1_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 2 Size: 2]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_multidim.c, multidim_arr2_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 3 Size: 3]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_multidim.c, multidim_arr4_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Assignment,Array access: Offset: 6 Size: 6]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_multidim.c, multidim_arr5_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_multidim.c, multidim_arr6_Bad, 5, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: [-oo, +oo] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/array_multidim.c, multidim_arr6_Good_FP, 5, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: [-oo, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/big_array.c, use_big_array_bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Call,Array declaration,Assignment,Assignment,Array access: Offset: 999999999 Size: 26460]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/break_continue_return.c, break_continue_return, 4, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/break_continue_return.c, break_continue_return, 13, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/break_continue_return.c, break_continue_return, 16, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/calloc.c, calloc_bad1, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Assignment,Array access: Offset: -1 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/calloc.c, calloc_bad1, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Assignment,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast2_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 20 Size: 16]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_float_to_int_Bad, 5, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Offset trace>,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: [-oo, 9] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_float_to_int_Good_FP, 5, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Offset trace>,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: [-oo, 9] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_signed_to_unsigned2_Bad_FN, 4, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_signed_to_unsigned_Bad, 4, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_signed_to_unsigned_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 4294967295 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_signed_to_unsigned_Good, 4, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_unsigned_to_signed_Bad_FN, 4, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/cast.c, cast_unsigned_to_signed_Good, 4, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/do_while.c, do_while_2_Bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Assignment,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/do_while.c, do_while_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Array declaration,Assignment,Call,<Offset trace>,Parameter `len`,<Length trace>,Parameter `a`,Array access: Offset: [0, 10] Size: 10 by call to `do_while_sub` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/duplicates.c, one_alarm_is_enough, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Call,<Length trace>,Parameter `arr`,Array access: Offset: 1 Size: 1 by call to `two_accesses` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/duplicates.c, tsa_one_alarm_Bad, 0, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Call,<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: 3 Size: 1 by call to `two_symbolic_accesses` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/duplicates.c, tsa_two_alarms_Bad, 0, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Call,<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: -1 Size: 1 by call to `two_symbolic_accesses` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/duplicates.c, tsa_two_alarms_Bad, 0, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Call,<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: 1 Size: 1 by call to `two_symbolic_accesses` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/external.c, extern_bad, 5, BUFFER_OVERRUN_U5, no_bucket, ERROR, [<Length trace>,Unknown value from: lib,Assignment,Array access: Offset: [-oo, +oo] Size: [0, +oo]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/external.c, extern_bad, 10, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 30 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, call_initialize_arr_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Array declaration,Call,<Offset trace>,Parameter `count`,<Length trace>,Parameter `arr`,Array access: Offset: [0, 19] Size: 10 by call to `initialize_arr` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, call_two_loops_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,Call,Parameter `m`,Assignment,<Length trace>,Array declaration,Array access: Offset: 15 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, for_loop, 10, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Call,Array declaration,Assignment,Assignment,Assignment,Array access: Offset: [0, 9] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, infinite_for_loop_Good, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, threshold_by_comparison_1_Bad, 3, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 99] Size: 50]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, threshold_by_comparison_2_Bad, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, threshold_by_comparison_2_Bad, 8, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 99] Size: 50]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/for_loop.c, threshold_by_comparison_2_Good, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_access_index_4_on_local_array_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Call,<Length trace>,Parameter `arr`,Array access: Offset: 4 Size: 4 by call to `access_index_4` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_access_index_4_on_malloced_array_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Assignment,Call,<Length trace>,Parameter `arr`,Array access: Offset: 4 Size: 4 by call to `access_index_4` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_by_arr_bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: -1 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_by_ptr_bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: -1 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_by_struct_ptr_bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: -1 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_call_access_index_4_on_S3_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Assignment,Call,Parameter `s->ptr`,Call,<Length trace>,Parameter `arr`,Array access: Offset: 4 Size: 4 by call to `call_access_index_4_on_S3` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_function_ptr_bad1, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_function_ptr_bad1, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_function_ptr_good, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_id_S_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_id_S_Good_FP, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_va_arg_int_Bad, 2, BUFFER_OVERRUN_U5, no_bucket, ERROR, [Array declaration,Call,<Offset trace>,Unknown value from: __builtin_va_arg,Assignment,<Length trace>,Parameter `a`,Array access: Offset: [-oo, +oo] Size: 10 by call to `va_arg_int` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, call_va_arg_int_Good_FP, 2, BUFFER_OVERRUN_U5, no_bucket, ERROR, [Array declaration,Call,<Offset trace>,Unknown value from: __builtin_va_arg,Assignment,<Length trace>,Parameter `a`,Array access: Offset: [-oo, +oo] Size: 10 by call to `va_arg_int` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/function_call.c, function_call, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Call,<Offset trace>,Parameter `arr`,Assignment,<Length trace>,Parameter `arr`,Array access: Offset: 100 Size: 10 by call to `arr_access` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/get_field.c, call_get_field_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,Call,Parameter `x->field`,Call,Parameter `x->field`,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/get_field.c, call_get_field_cond_Bad, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/get_field.c, call_get_field_cond_Bad, 6, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/get_field.c, call_get_v2_Bad, 8, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [-oo, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/get_field.c, call_get_v2_Good_FP, 8, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [-oo, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/get_field.c, call_get_v_Bad, 8, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,Call,Parameter `l->next->prev->v`,Assignment,<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/get_field.c, make_many_locations, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/global.c, compare_global_const_enum_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/global.c, compare_global_const_enum_Good_FP, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/global.c, compare_global_variable_bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/global.c, copyfilter_Good_FP, 3, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([0, +oo] + 1):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/global.c, use_global_const_ten_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/goto_loop.c, goto_infinite_loop, 3, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([0, +oo] + 1):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/goto_loop.c, goto_infinite_loop, 4, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/goto_loop.c, goto_infinite_loop, 11, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/goto_loop.c, goto_loop, 11, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/inf_loop.c, inf_loop, 4, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, False_Issue_Type_l3_unknown_function_Bad, 1, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Call,Assignment,Assignment,Binary operation: ([5, +oo] × 4):unsigned64]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, False_Issue_Type_l3_unknown_function_Bad, 1, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Call,Assignment,Assignment,Binary operation: ([0, +oo] + 5):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, False_Issue_Type_l3_unknown_function_Bad, 2, INTEGER_OVERFLOW_U5, no_bucket, ERROR, [<LHS trace>,Unknown value from: unknown_function,Binary operation: ([-oo, +oo] × 10):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, False_Issue_Type_l3_unknown_function_Bad, 5, BUFFER_OVERRUN_U5, no_bucket, ERROR, [<Offset trace>,Unknown value from: unknown_function,Assignment,<Length trace>,Call,Assignment,Assignment,Array declaration,Assignment,Array access: Offset: 10 Size: [5, +oo]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, alloc_is_big_Bad, 0, INFERBO_ALLOC_IS_BIG, no_bucket, ERROR, [Allocation: Length: 2000000000]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, alloc_is_negative_Bad, 0, INFERBO_ALLOC_IS_NEGATIVE, no_bucket, ERROR, [Allocation: Length: -2]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, alloc_is_zero_Bad, 0, INFERBO_ALLOC_IS_ZERO, no_bucket, ERROR, [Allocation: Length: 0]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, alloc_may_be_big_Bad, 0, INFERBO_ALLOC_MAY_BE_BIG, no_bucket, ERROR, [Call,Assignment,Allocation: Length: [1, 1000000001]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, alloc_may_be_big_Good_FP, 1, INFERBO_ALLOC_MAY_BE_BIG, no_bucket, ERROR, [Call,Assignment,Allocation: Length: [1, 1000000001]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, alloc_may_be_negative_Bad, 0, INFERBO_ALLOC_MAY_BE_NEGATIVE, no_bucket, ERROR, [Call,Assignment,Allocation: Length: [-5, 5]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, alloc_may_be_negative_Good_FP, 0, INFERBO_ALLOC_MAY_BE_NEGATIVE, no_bucket, ERROR, [Call,Assignment,Allocation: Length: [-5, 5]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, call_to_alloc_may_be_big2_is_big_Bad, 1, INFERBO_ALLOC_IS_BIG, no_bucket, ERROR, [Call,Parameter `n`,Allocation: Length: [100000000, +oo] by call to `alloc_may_be_big2_Silenced` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, call_to_alloc_may_be_big2_is_big_Bad, 1, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [Call,<LHS trace>,Parameter `n`,<RHS trace>,Call,Assignment,Assignment,Binary operation: (100000000 + [0, +oo]):signed32 by call to `alloc_may_be_big2_Silenced` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, call_two_safety_conditions_l1_and_l2_Bad, 0, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Call,<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: 10 Size: 10 by call to `two_safety_conditions` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, call_two_safety_conditions_l1_and_l2_Bad, 0, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Call,<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: [9, 11] Size: 10 by call to `two_safety_conditions` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, deduplicate_issues_1_Bad, 6, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Unknown value from: unknown_function,Assignment,<Length trace>,Array declaration,Array access: Offset: [10, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, deduplicate_issues_2_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, deduplicate_issues_2_Bad, 6, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Unknown value from: unknown_function,Assignment,<Length trace>,Array declaration,Array access: Offset: [10, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_call_to_s2_symbolic_widened_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Assignment,Call,<Offset trace>,Parameter `n`,Assignment,<Length trace>,Parameter `n`,Array declaration,Array access: Offset: [1, +oo] Size: 1 by call to `s2_symbolic_widened_Bad` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_call_to_s2_symbolic_widened_Bad, 2, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [Assignment,Call,<LHS trace>,Parameter `n`,Assignment,Binary operation: ([1, +oo] + 1):signed32 by call to `s2_symbolic_widened_Bad` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_concrete_overrun_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_concrete_underrun_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: -1 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_symbolic_overrun2_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Parameter `n`,<Length trace>,Parameter `n`,Array declaration,Array access: Offset: n Size: n]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_symbolic_overrun_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Parameter `i`,<Length trace>,Array declaration,Array access: Offset: [max(10, i), i] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_symbolic_underrun_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Parameter `i`,<Length trace>,Array declaration,Array access: Offset: [i, min(-1, i)] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_symbolic_widened_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Parameter `n`,Assignment,<Length trace>,Parameter `n`,Array declaration,Array access: Offset: [n, +oo] Size: n]
|
[clang] fix bad interaction between ConditionalOperator and initializers
Summary:
This is several inter-connected changes together to keep the tests
happy.
The ConditionalOperator `b?t:e` is translated by first creating a
placeholder variable to temporarily store the result of the evaluation
in each branch, then the real thing we want to assign to reads that
variable. But, there are situations where that changes the semantics of
the expression, namely when the value created is a struct on the stack
(eg, a C++ temporary). This is because in SIL we cannot assign the
*address* of a program variable, only its contents, so by the time we're
out of the conditional operator we cannot set the struct value
correctly anymore: we can only set its content, which we did, but that
results in a "shifted" struct value that is one dereference away from
where it should be.
So a batch of changes concern `conditionalOperator_trans`:
- instead of systematically creating a temporary for the conditional,
use the `trans_state.var_exp_typ` provided from above if available
when translating `ConditionalOperator`
- don't even set anything if that variable was already initialized by
merely translating the branch expression, eg when it's a constructor
- fix long-standing TODO to propagate these initialization facts
accurately for ConditionalOperator (used by `init_expr_trans` to also
figure out if it should insert a store to the variable being
initialised or not)
The rest of the changes adapt some relevant other constructs to deal
with conditionalOperator properly now that it can set the current
variable itself, instead of storing stuff inside a temp variable. This
change was a problem because some constructs, eg a variable declaration,
will insert nodes that set up the variable before calling its
initialization, and now the initialization happens *before* that setup,
in the translation of the inner conditional operator, which naturally
creates nodes above the current one.
- add a generic helper to force a sequential order between two
translation results, forcing node creation if necessary
- use that in `init_expr_trans` and `cxxNewExpr_trans`
- adjust many places where `var_exp_typ` was incorrectly not reset when translating sub-expressions
The sequentiality business creates more nodes when used, and the
conditionalOperator business uses fewer temporary variables, so the
frontend results change quite a bit.
Note that biabduction tests were invaluable in debugging this. There
could be other constructs to adjust similarly to cxxNewExpr that were
not covered by the tests though.
Added tests in pulse that exercises the previous bug.
Reviewed By: da319
Differential Revision: D24796282
fbshipit-source-id: 0790c8d17
4 years ago
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_symbolic_widened_Good, 2, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_unknown_function_Bad, 2, INTEGER_OVERFLOW_U5, no_bucket, ERROR, [<LHS trace>,Unknown value from: unknown_function,Binary operation: ([-oo, +oo] × 10):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l1_unknown_function_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Unknown value from: unknown_function,Assignment,<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l2_concrete_no_overrun_Good_FP, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l2_concrete_no_underrun_Good_FP, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [-1, 9] Size: 9]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l2_concrete_overrun_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l2_concrete_underrun_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [-1, 9] Size: 9]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l2_loop_overflow2_Bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Parameter `length`,<Length trace>,Parameter `length`,Array declaration,Array access: Offset: [1, length] Size: length]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l2_loop_overflow_Bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Parameter `length`,Assignment,<Length trace>,Parameter `length`,Array declaration,Array access: Offset: [1, length] Size: length]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l2_symbolic_overrun_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Parameter `n`,<Length trace>,Parameter `n`,Array declaration,Array access: Offset: n Size: n]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l3_concrete_no_overrun_Good_FP, 2, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Call,Assignment,Array declaration,Array access: Offset: [0, 10] Size: [5, 15]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l3_concrete_no_underrun_Good_FP, 2, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [-1, 9] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l3_concrete_overrun_Bad, 2, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Call,Assignment,Array declaration,Array access: Offset: [0, 10] Size: [5, 15]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l3_concrete_underrun_Bad, 2, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Call,Assignment,<Length trace>,Array declaration,Array access: Offset: [-1, 9] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l4_widened_no_overrun_Good_FP, 2, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([0, +oo] + 1):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l4_widened_no_overrun_Good_FP, 3, BUFFER_OVERRUN_L4, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l4_widened_overrun_Bad, 2, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([0, +oo] + 1):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l4_widened_overrun_Bad, 3, BUFFER_OVERRUN_L4, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, l5_external_Warn_Bad, 2, BUFFER_OVERRUN_U5, no_bucket, ERROR, [<Offset trace>,Unknown value from: unknown_function,<Length trace>,Array declaration,Array access: Offset: [-oo, +oo] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, s2_symbolic_widened_Bad, 3, BUFFER_OVERRUN_S2, no_bucket, ERROR, [<Offset trace>,Parameter `n`,Assignment,<Length trace>,Parameter `n`,Array declaration,Array access: Offset: [n, +oo] Size: n]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, s2_symbolic_widened_Good_FP, 3, BUFFER_OVERRUN_S2, no_bucket, ERROR, [<Offset trace>,Parameter `n`,Assignment,<Length trace>,Parameter `n`,Array declaration,Array access: Offset: [n, +oo] Size: n]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/issue_kinds.c, zero_to_infty, 3, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([0, +oo] + 1):signed32]
|
[inferbo] Fix min of minmax and linear
Summary:
This diff corrects missing cases of `exact_min`.
```
min(c1 + min(d1, x), c2 + x)
= min(min(c1 + d1, c1 + x), c2 + x)
= min(c1 + d1, min(c1 + x, c2 + x))
= min(c1 + d1, min(c1, c2) + x)
= min(c1, c2) + min(c1 + d1 - min(c1, c2), x)
```
```
min(c1 - max(d1, x), c2 - x)
= min(c1 + min(-d1, -x), c2 - x)
= min(min(c1 - d1, c1 - x), c2 - x)
= min(c1 - d1, min(c1 - x, c2 - x))
= min(c1 - d1, min(c1, c2) - x)
= min(c1, c2) + min(c1 - d1 - min(c1, c2), -x)
= min(c1, c2) - max(min(c1, c2) - (c1 - d1), x)
```
Reviewed By: ezgicicek
Differential Revision: D16769307
fbshipit-source-id: 7bafd2ed6
5 years ago
|
|
|
|
codetoanalyze/c/bufferoverrun/minmax.c, call_exact_minmax_sym_Bad, 3, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,Call,Parameter `x`,Assignment,<Length trace>,Assignment,Array declaration,Array access: Offset: [2, 5] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/minmax.c, exact_min_minus_min_linear_CAF, 6, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/minmax.c, exact_min_plus_min_plus_min_UNDERRUN, 7, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Parameter `x`,Call,Assignment,Assignment,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: [-19+min(0, x), -1] Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/minmax.c, underapprox_min_minus_min_linear_CAF, 6, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, fgetc_255_bad, 4, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 255] Size: 255]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, fgetc_256_bad, 3, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 256] Size: 256]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, fgetc_m1_bad, 3, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [-1, 255] Size: 10000]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memcpy_bad1, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 44 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memcpy_bad2, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 44 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memcpy_bad3, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 18446744073709551615 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memcpy_bad4, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 8 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memcpy_contents_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memcpy_integer_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memmove_bad1, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 44 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memmove_bad2, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 44 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memmove_bad3, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 18446744073709551615 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memmove_bad4, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 8 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memset_bad1, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 44 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memset_bad2, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 18446744073709551615 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, memset_bad3, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Assignment,Array access: Offset added: 8 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strcat_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 8 Size: 8]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strcat_strlen_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 8 Size: 8]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strcpy_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: 4 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strcpy_contents_Bad, 7, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strcpy_literal_string_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 4 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strcpy_no_null_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strcpy_strlen_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: 4 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_bad1, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 44 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_bad2, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 44 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_bad3, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 18446744073709551615 Size: 40]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_bad4, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 8 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_contents_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: 4 Size: 4]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_good5_FP, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset added: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_no_null_2_Bad, 6, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strncpy_no_null_4_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Array declaration,<Length trace>,Array declaration,Array access: Offset: 14 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strndup_1_Bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Through,Array declaration,Assignment,Array access: Offset: [0, 99] Size: 13]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strndup_2_Bad, 6, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Through,Array declaration,Assignment,Array access: Offset: [0, 11] Size: 6]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strndup_3_Bad, 6, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([0, +oo] + 1):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/models.c, strndup_3_Bad, 7, BUFFER_OVERRUN_L4, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Assignment,Through,Array declaration,Assignment,Array access: Offset: [0, +oo] Size: 6]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop, 7, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop3_Bad, 6, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop4_Bad, 6, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop_narrowing_Bad, 4, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop_narrowing_Bad, 5, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop_narrowing_Bad, 6, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop_narrowing_Good, 4, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop.c, nested_loop_narrowing_Good, 5, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop_with_label.c, nested_loop_with_label, 4, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop_with_label.c, nested_loop_with_label, 6, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/nested_loop_with_label.c, nested_loop_with_label, 7, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/pointer_arith.c, FP_pointer_arith5_Ok, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Array declaration,Assignment,<Length trace>,Array declaration,Array access: Offset: [3, 2043] (⇐ [0, 1020] + [3, 1023]) Size: 1024]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/pointer_arith.c, array_pointer_arith_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Assignment,Array access: Offset: 10 (⇐ 5 + 5) Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/pointer_arith.c, call_pointer_arith3_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Call,<Offset trace>,Parameter `x`,<Length trace>,Parameter `x`,Array access: Offset: 10 (⇐ 100 + -90) Size: 5 by call to `pointer_arith3` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/pointer_arith.c, call_pointer_arith4_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Assignment,Call,<Offset trace>,Parameter `x`,<Length trace>,Array declaration,Array access: Offset: 10 (⇐ 100 + -90) Size: 5 by call to `FN_pointer_arith4_Bad` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/pointer_arith.c, pointer_arith4_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Parameter `x`,<Length trace>,Array declaration,Array access: Offset: 10 (⇐ x + -x + 10) Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/pointer_arith.c, pointer_arith5_Bad, 5, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Array declaration,Assignment,<Length trace>,Array declaration,Array access: Offset: [4, 2044] (⇐ [0, 1020] + [4, 1024]) Size: 1024]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/pointer_arith.c, pointer_arith_bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, FP_prune_alias_exp_Ok, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 1 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, bad_if_alias, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 1 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, bad_if_not_alias, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 1 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, call_forget_locs_latest_prune_Bad, 0, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Call,<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: 10 Size: 5 by call to `forget_locs_latest_prune` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, call_latest_prune_join_3_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Call,<Offset trace>,Parameter `n`,<Length trace>,Parameter `a`,Array access: Offset: 3 Size: 2 by call to `latest_prune_join` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, call_not_prune_multiple2_Bad, 2, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Assignment,Call,<Offset trace>,Parameter `m`,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 5 by call to `not_prune_multiple2` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, call_prune_arrblk_ne_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Array declaration,Assignment,Call,<Length trace>,Parameter `x`,Array access: Offset: 5 Size: 5 by call to `prune_arrblk_ne_CAT` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, forget_locs_latest_prune, 9, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, loop_prune2_Good_FP, 8, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Parameter `length`,<Length trace>,Parameter `length`,Array declaration,Array access: Offset: [1, length] Size: length]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, not_prune_multiple1_Bad, 4, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, not_prune_multiple3_Bad, 7, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 10] Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_and_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_and_Ok, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_eq_Ok, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_exp2_CAF, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_exp_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_ge_Ok, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_gt_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_le_Ok, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_lt_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_ne_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_not_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_not_Ok, 7, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_not_Ok, 11, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_or_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_alias_or_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, prune_int_by_pointer_Bad, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, unknown_alias_Bad, 4, BUFFER_OVERRUN_U5, no_bucket, ERROR, [<Length trace>,Unknown value from: unknown1,Assignment,Array access: Offset: [-oo, +oo] Size: [0, +oo]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, unknown_alias_Bad, 6, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_alias.c, unknown_alias_Good, 4, BUFFER_OVERRUN_U5, no_bucket, ERROR, [<Length trace>,Unknown value from: unknown1,Assignment,Array access: Offset: [-oo, +oo] Size: [0, +oo]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, call_fromHex2_200_Good_FP, 3, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Call,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: [-28, 16] Size: 17]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, call_fromHex2_sym_Good_FP, 3, BUFFER_OVERRUN_L3, no_bucket, ERROR, [<Offset trace>,Call,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: [-28, 16] Size: 17]
|
[clang] fix bad interaction between ConditionalOperator and initializers
Summary:
This is several inter-connected changes together to keep the tests
happy.
The ConditionalOperator `b?t:e` is translated by first creating a
placeholder variable to temporarily store the result of the evaluation
in each branch, then the real thing we want to assign to reads that
variable. But, there are situations where that changes the semantics of
the expression, namely when the value created is a struct on the stack
(eg, a C++ temporary). This is because in SIL we cannot assign the
*address* of a program variable, only its contents, so by the time we're
out of the conditional operator we cannot set the struct value
correctly anymore: we can only set its content, which we did, but that
results in a "shifted" struct value that is one dereference away from
where it should be.
So a batch of changes concern `conditionalOperator_trans`:
- instead of systematically creating a temporary for the conditional,
use the `trans_state.var_exp_typ` provided from above if available
when translating `ConditionalOperator`
- don't even set anything if that variable was already initialized by
merely translating the branch expression, eg when it's a constructor
- fix long-standing TODO to propagate these initialization facts
accurately for ConditionalOperator (used by `init_expr_trans` to also
figure out if it should insert a store to the variable being
initialised or not)
The rest of the changes adapt some relevant other constructs to deal
with conditionalOperator properly now that it can set the current
variable itself, instead of storing stuff inside a temp variable. This
change was a problem because some constructs, eg a variable declaration,
will insert nodes that set up the variable before calling its
initialization, and now the initialization happens *before* that setup,
in the translation of the inner conditional operator, which naturally
creates nodes above the current one.
- add a generic helper to force a sequential order between two
translation results, forcing node creation if necessary
- use that in `init_expr_trans` and `cxxNewExpr_trans`
- adjust many places where `var_exp_typ` was incorrectly not reset when translating sub-expressions
The sequentiality business creates more nodes when used, and the
conditionalOperator business uses fewer temporary variables, so the
frontend results change quite a bit.
Note that biabduction tests were invaluable in debugging this. There
could be other constructs to adjust similarly to cxxNewExpr that were
not covered by the tests though.
Added tests in pulse that exercises the previous bug.
Reviewed By: da319
Differential Revision: D24796282
fbshipit-source-id: 0790c8d17
4 years ago
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, call_greater_than_Good, 2, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
[inferbo] Avoid precision-losing pruning
Summary:
In this diff, it avoids a precision-losing pruning, which was needed
to keep effects of assume commands.
```
unsigned int c = a + b; // (1)
if (c > 0) { // (2)
char result[c];
result[c - 1] = 0; // (4)
}
```
For example, in the example, `c` is assigned by `[a+b,a+b]` at (1),
then it tried to prune the lower bound of `c` to 1 at (2) while losing
precision, in order to say `c - 1` at (4) is safe in terms of integer
underflow. Instead, it could not say that `c - 1` is smaller than `c`
in the buffer access, because the former is analyzed to `[0,a+b-1]` and
the latter `[1,a+b]` at (4).
Now, the situation has changed. By adopting conditional proof
obligation (D13749914), the FP of integer overflow can be suppressed
without the precision-losing pruning.
Reviewed By: mbouaziz
Differential Revision: D14122770
fbshipit-source-id: 634744e99
6 years ago
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, call_null_pruning_symbols_3_Good_FP, 7, BUFFER_OVERRUN_L3, no_bucket, ERROR, [Assignment,Call,<Offset trace>,Parameter `a`,Assignment,<Length trace>,Parameter `a`,Assignment,Array declaration,Array access: Offset: [-1, 9] Size: [0, 10] by call to `null_pruning_symbols` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, call_null_pruning_symbols_3_Good_FP, 7, INTEGER_OVERFLOW_L2, no_bucket, ERROR, [Assignment,Call,<LHS trace>,Parameter `a`,Assignment,Binary operation: ([0, 10] - 1):unsigned32 by call to `null_pruning_symbols` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, call_prune_add2_2_Bad, 0, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Call,<Offset trace>,Parameter `x`,<Length trace>,Array declaration,Array access: Offset: 10 Size: 10 by call to `prune_add2` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, call_prune_sub2_2_Bad, 0, BUFFER_OVERRUN_L1, no_bucket, ERROR, [Call,<Offset trace>,Parameter `x`,<Length trace>,Array declaration,Array access: Offset: 10 Size: 10 by call to `prune_sub2` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, null_pruning1_Bad, 2, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, null_pruning1_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, null_pruning1_Good, 2, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, null_pruning2_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, null_pruning2_Good_FP, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, prune_constant_false_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, prune_constant_not_Bad, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, prune_constant_not_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 1 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, prune_constant_true_Ok, 3, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/prune_constant.c, prune_constant_value_Ok, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/relation.c, FP_array_access2_Ok, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 3 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/relation.c, FP_array_access3_Ok, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 3 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/relation.c, FP_array_access4_Ok, 5, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 3 Size: 1]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/sizeof.c, eval_sizeof_bad, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/sizeof.c, eval_sizeof_bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 1 Size: 0]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/sizeof.c, static_stride_bad, 5, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/sizeof.c, static_stride_bad, 7, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 1 Size: 0]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/struct_copy.c, nested_struct_copy_Bad, 7, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 3]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/struct_copy.c, struct_copy_Bad, 6, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 3]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/struct_copy.c, struct_copy_decl_Bad, 6, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 3]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/struct_copy.c, struct_copy_decl_by_function_Bad, 3, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Call,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 3]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/struct_copy.c, struct_copy_from_function_call_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Call,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 3]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/struct_copy.c, struct_copy_from_wrapper_call_Bad, 4, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Offset trace>,Call,Call,Assignment,Assignment,<Length trace>,Array declaration,Array access: Offset: 5 Size: 3]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/trivial.c, differentiate_array_info_Bad, 8, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Assignment,Array access: Offset: 5 Size: 5]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/trivial.c, differentiate_array_info_Bad, 8, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Assignment,Array access: Offset: 10 (⇐ 5 + 5) Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/trivial.c, malloc_zero_Bad, 2, INFERBO_ALLOC_IS_ZERO, no_bucket, ERROR, [Allocation: Length: 0]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/trivial.c, trivial_Bad, 2, BUFFER_OVERRUN_L1, no_bucket, ERROR, [<Length trace>,Array declaration,Array access: Offset: 10 Size: 10]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, FP_loop_once_intentional_good, 3, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, FP_loop_with_break_good, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, FP_loop_with_exit_good, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, FP_loop_with_return_good, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, FP_loop_with_unreachable_good, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, condition_always_false_bad, 1, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, condition_always_true_bad, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, condition_always_true_with_else_bad, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, infinite_loop_bad, 1, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unreachable.c, never_loops_bad, 1, CONDITION_ALWAYS_FALSE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unrolling.c, call_do_two_times2_Good_FP, 0, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Call,<Offset trace>,Assignment,<Length trace>,Array declaration,Array access: Offset: [0, 4] Size: 1 by call to `do_two_times2_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/unrolling.c, call_do_two_times_Good_FP, 0, BUFFER_OVERRUN_L2, no_bucket, ERROR, [Call,<Offset trace>,Parameter `n`,<Length trace>,Array declaration,Array access: Offset: [0, 4] Size: 1 by call to `do_two_times_Good` ]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/while_loop.c, diverge_on_narrowing, 2, CONDITION_ALWAYS_TRUE, no_bucket, WARNING, [Here]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/while_loop.c, join_minmax_with_sum_signed_Good_FP, 4, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Assignment,Binary operation: ([-oo, +oo] + 1):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/while_loop.c, join_minmax_with_sum_signed_Good_FP, 6, INTEGER_OVERFLOW_L5, no_bucket, ERROR, [<LHS trace>,Parameter `y`,<RHS trace>,Parameter `y`,Binary operation: (x + [min(0, y), max(0, y)]):signed32]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/while_loop.c, join_minmax_with_sum_signed_Good_FP, 12, BUFFER_OVERRUN_L5, no_bucket, ERROR, [<Offset trace>,Parameter `y`,<Length trace>,Assignment,Array declaration,Array access: Offset: [0, +oo] Size: [0, +oo]]
|
|
|
|
|
|
codetoanalyze/c/bufferoverrun/while_loop.c, while_loop, 3, BUFFER_OVERRUN_L2, no_bucket, ERROR, [<Offset trace>,Assignment,<Length trace>,Array declaration,Assignment,Array access: Offset: [0, 10] Size: 10]
|
