Summary:
I wanted to change the default to "callgraph" but that created issues in
our tests, introducing flaky behaviours and even a failure due to trying
to run the pre-analysis multiple times (not 100% sure it was related).
Instead, document the various options and put the option in the analysis
manual so users can choose.
Reviewed By: martintrojer
Differential Revision: D24193751
fbshipit-source-id: 4b7c33a79
Summary:
Take another page from the Incorrectness Logic book and refrain from reporting issues on paths unless we know for sure that this path will be taken.
Previously, we would report on paths that are merely *not impossible*. This goes very far in the other direction, so it's possible we'll want to go back to some sort of middle ground. Or maybe not. See the changes in the tests to get a sense of what we're missing.
Reviewed By: ezgicicek
Differential Revision: D24014719
fbshipit-source-id: d451faf02
Summary:
This can be useful to make pulse forget about tricky parts of the code.
Treat "skipped" procedures as unknown so heuristics for mutating the
return value and parameters passed by reference are applied.
Reviewed By: ezgicicek
Differential Revision: D23729410
fbshipit-source-id: d7a4924a8
Summary:
This diff reports paths under the xcode isysroot as relative in tests.
This was a problem when another machine that has a different isysroot
directory is running the test.
Reviewed By: ezgicicek
Differential Revision: D23729222
fbshipit-source-id: 4e9681f65
Summary:
This diff adds a new experimental checker for detecting size of objects in autorelease pool in ObjC. The basic mechanism is almost the same with the previous cost calculation:
* Autorelease pool size is increased at explicit `autorelease` call
* Autorelease pool size is set as zero by the `autoreleasepool` block.
While it only supports the explicit calls as of now, we will extend the checker to handle more cases in the following diffs.
Reviewed By: ezgicicek
Differential Revision: D23473145
fbshipit-source-id: 416488176
Summary:
This diff extends the cost_item json format to print the autoreleasepool_size field. Not yet, there
is no semantics for that code kind, so the results will always be zero with no traces.
Reviewed By: ezgicicek
Differential Revision: D23540665
fbshipit-source-id: 94442e376
Summary:
Report errors found by running Topl on top of Pulse, when using
--topl-pulse. Topl tests now run on top of Pulse.
Reviewed By: jvillard
Differential Revision: D23030771
fbshipit-source-id: 8770c2902
Summary:
Pausing the experiment in favour of new PulseFormula. Can be resurrected
later.
Reviewed By: skcho
Differential Revision: D22576274
fbshipit-source-id: 76529d767
Summary: Since there is no discernible downside in using the write daemon unless in single-thread mode or in buck, make it only depend on these circumstances, not a command line flag.
Reviewed By: skcho
Differential Revision: D23004451
fbshipit-source-id: 5c1d06ed1
Summary:
This diff adds an option `max-jobs` that restrict the number of jobs
running simultaneously.
Reviewed By: ngorogiannis
Differential Revision: D22978328
fbshipit-source-id: 544153c1c
Summary: New, experimental for now, integration with buck on Java using the `#infer-java-capture` flavor.
Reviewed By: artempyanykh
Differential Revision: D22187748
fbshipit-source-id: 62cdafe6b
Summary: This diff adds an option to shard spec files in `infer-out/specs`. For some big analysis targets, there can be too many of spec files in the one directory, which slows down IO speed for reading the spec files.
Reviewed By: jvillard
Differential Revision: D20002128
fbshipit-source-id: bd7722883
Summary:
The old --topl-only is now --topl-biabd-only, and there's also
--topl-pulse-only. This is WIP: the latter runs pulse, but it doesn't yet
extract Topl errors from pulse summaries. (The citv part of pulse path
conditions appears to have the necessary information.)
Reviewed By: jvillard
Differential Revision: D22815250
fbshipit-source-id: a01792945
Summary: To avoid NULLPTR_DEREFERENCE false positives we want to model some functions as returning non-null. A new flag --pulse-model-return-nonnull allows us to provide a list of such functions.
Reviewed By: ezgicicek
Differential Revision: D22431564
fbshipit-source-id: 9944c7382
Summary:
New `debug` command takes over from `explore` the `--procedures`, `--source-files` functionality and adds `--global-tenv` for printing the global type environment.
Also, uncrustify printing of type environments.
Reviewed By: jvillard
Differential Revision: D22284807
fbshipit-source-id: 9c6fb0c7a
Summary:
We need to check if `folly::Optional` is not `folly::none` if we want to retrieve the value, otherwise a runtime exception is thrown:
```
folly::Optional<int> foo{folly::none};
return foo.value(); // bad
```
```
folly::Optional<int> foo{folly::none};
if (foo) {
return foo.value(); // ok
}
```
This diff adds a new issue type that reports if we try to access `folly::Optional` value when it is known to be `folly::none`.
Reviewed By: ezgicicek
Differential Revision: D22053352
fbshipit-source-id: 32cb00a99
Summary: This linters were not used much anymore, so we can delete them.
Reviewed By: ngorogiannis
Differential Revision: D22233895
fbshipit-source-id: f31180a05
Summary: There is now a compilation check for UNAVAILABLE_API_IN_SUPPORTED_IOS_SDK so this check is less useful. Also the check REGISTERED_OBSERVER_BEING_DEALLOCATED is useful only in an old version of iOS.
Reviewed By: ngorogiannis
Differential Revision: D22231851
fbshipit-source-id: 72151fef5
Summary:
Better API for creating issue types:
- distinguish hidden/normal/dynamic issue types
- normal issue types should always be documented
- add "TODO" to missing documentation
- dynamic issue types are the only ones that can be created outside of
IssueType.ml
I had to document the new CCBM and the resource leak lab exercise to
keep Help.ml happy, did `make doc-publish`.
Reviewed By: ngorogiannis
Differential Revision: D22118766
fbshipit-source-id: 3d0194518
Summary:
This diff adds a prototype of a new checker that collects config checkings between markers.
Basically, what the checker is doing is a taint analysis.
* Taint source: function calls of "marker start"
* Taint sink: function calls of config checking
* Taint remove: function calls of "marker end"
By the taint analysis, the analysis results will say that which taints can reach to the sink. In other words, which marker ID that has been started can reach to the config checks, before marker's ending.
I am separating the diff into three steps:
(1/3) Add basic abstract semantics
(2/3) Add trace information
(3/3) Add reporting with test examples
Reviewed By: jvillard
Differential Revision: D21998170
fbshipit-source-id: e7759f62f
Summary:
This diff adds a prototype of a new checker that collects config checkings between markers.
Basically, what the checker is doing is a taint analysis.
* Taint source: function calls of "marker start"
* Taint sink: function calls of config checking
* Taint remove: function calls of "marker end"
By the taint analysis, the analysis results will say that which taints can reach to the sink. In other words, which marker ID that has been started can reach to the config checks, before marker's ending.
I am separating the diff into three steps:
(1/3) Add basic abstract semantics
(2/3) Add trace information
(3/3) Add reporting with test examples
Reviewed By: jvillard
Differential Revision: D21935546
fbshipit-source-id: 092abb92c
Summary: Pulse has now a better version of this check, so let's delete it.
Reviewed By: ngorogiannis
Differential Revision: D22019247
fbshipit-source-id: 344678225
Summary:
This issue type was not giving good results and can be replaced by
Pulse's version.
Reviewed By: ngorogiannis
Differential Revision: D22019551
fbshipit-source-id: 5cf3db46d
Summary: To avoid NULLPTR_DEREFERENCE false positives we want to treat some functions as `abort`. A new flag `--pulse-model-abort` allows us to provide a list of such functions.
Reviewed By: ezgicicek
Differential Revision: D21962555
fbshipit-source-id: d46b93c99
Summary: The new memory leaks analysis is now ready to be enabled by default and turned on in production. This also replaces the biabduction one which is now disabled.
Reviewed By: jvillard
Differential Revision: D21998666
fbshipit-source-id: 9cd95e894
Summary:
Turns out it was useful, so it is now reborn in OCaml.
Fixes https://github.com/facebook/infer/issues/1262.
Reviewed By: skcho
Differential Revision: D22016185
fbshipit-source-id: 31ccb7540
Summary:
Similarly as for issue types, we want to generate the website
documentation from infer itself so we can easily cross-reference
checkers and the issue types they report.
This imports the website documentation written for some (very few) of
the checkers. I wrote some cursory one-liners for the rest.
Reviewed By: dulmarod
Differential Revision: D21934375
fbshipit-source-id: 8c9dc2b08
Summary:
Take all the issue type documentation in the website and add it to infer
itself so it can generate the website (see further diffs).
I mostly generated this diff by writing a script to call from `utop`
with various file lists to do most of the heavy lifting for me and make
sure I didn't forget any issue types: P132800781
Reviewed By: ngorogiannis
Differential Revision: D21934372
fbshipit-source-id: f3ea8c566
Summary:
`infer help` will be used to display information about issue types and
checkers, and to generate the corresponding website documentation. We
can add more things in it over time. The goal is to avoid having to go
read the source code of infer to figure things out that are user-facing.
Reviewed By: ezgicicek
Differential Revision: D21934376
fbshipit-source-id: 2788c5af1
Summary:
We stopped relying on an arbitrary threshold. Hence,
- we don't need all the machinery for reporting at a specific node for a threshold
- we can remove
- the issue type `EXPENSIVE_EXECUTION_TIME`
- the config option `--use-cost-threshold`.
Reviewed By: skcho
Differential Revision: D21859815
fbshipit-source-id: b73a2372d
Summary:
In order to test cost analysis results, currently we rely on having an arbitrary cost threshold (200) and report issues that exceed this cost. For instance, a cost of 201 is considered expensive and reported as `EXPENSIVE_EXECUTION_TIME` issue in cost tests.
This means, if we change the cost analysis in a slight way that results in some constant cost increase under 200, we wouldn't able to detect it. I find this unsatisfactory and somewhat hacky.
This diff adds the ability to write the result of `costs-report.json` into a separate `cost-issues.exp` and then compare the actual costs (not only than relying on this arbitrary threshold reporting mechanism).
Reviewed By: skcho
Differential Revision: D21816312
fbshipit-source-id: 93b531928
Summary:
It seems these were put there even though there is no inter-dependency
with any of the other options.
Reviewed By: skcho
Differential Revision: D21686739
fbshipit-source-id: 6578f55c2
Jules Villard
Ezgi Çiçek
Sungkeun Cho
Radu Grigore
Nikos Gorogiannis
Daiva Naudziuniene
Dulma Churchill
Artem Pianykh
Andrew V. Jones