Summary:
This simplifies the frontends and backends in most cases. Before this diff,
returning `void` could be modelled either with a `None` return, or a dummy
return variable with type `Tvoid`. Now it's always the latter.
Reviewed By: sblackshear, dulmarod
Differential Revision: D7832938
fbshipit-source-id: 0a403d1
Summary:
Upgrade ocamlformat, and base which needs to be done in sync in order to build
ocamlformat, and the other deps can come for the ride.
Reviewed By: jvillard
Differential Revision: D7663537
fbshipit-source-id: 3e90970
Summary:
Now that everything can run at the same time and we have preanalyses, it can be quite hard to read debug sessions.
Here come session names!
Depends on D7607336
Reviewed By: sblackshear
Differential Revision: D7607481
fbshipit-source-id: 676af86
Summary:
Also make it optional, since it's only used for debug messages. Name a couple
more of these for other similar functions.
Reviewed By: sblackshear
Differential Revision: D6797385
fbshipit-source-id: e6e9b2e
Summary:
Was trying to decide where to add a new Java utility function and realized that things are a bit disorganized.
Some operations on `Typ.Name.t`'s live in `Typ.Procname`, and some live inside an inner `Java` module whereas some are outside of the module with a `java_` prefix.
Let's move toward putting all Java/C/Objc/C++-specific functions in dedicated modules.
This diff does some of the work for Java.
There are Java-specific functions that operate on `Typ.Procname.t`'s that will have to be converted to work on `Typ.Procname.Java.t`'s, but changing those clients will be more involved.
Will also move C/Objc/C++ functions in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6737724
fbshipit-source-id: cdd6e68
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary: There was a back and forth conversion between `string` and `IssueType.t` which was not necessary.
Reviewed By: sblackshear
Differential Revision: D6562747
fbshipit-source-id: 70b57a2
Summary:
We need to use the procedure description of the callees for lazy dynamic dispatch and for the resolution of the lambda. We may also need this information in other analyses, e.g. for RacerD. This diff makes the procedure description of the callees as part of the summary.
The procedure description has been part of the summary for a while already without noticeable decrease in performance.
Reviewed By: mbouaziz
Differential Revision: D6322038
fbshipit-source-id: 84101cb
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Read the documentation and it doesn't seem like these functions are guaranteed to choose the same value in different runs.
I hypothesize that these may be the source of flakiness in the thread-safety tests/smoke tests.
Reviewed By: jvillard
Differential Revision: D5794384
fbshipit-source-id: 02b7a96
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary: This will allow us to gradually get rid of the exceptions thrown during the analysis while detecting the regressions earlier
Reviewed By: jberdine, jvillard
Differential Revision: D5385154
fbshipit-source-id: 605e3f5
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
After D5245416 I was taking a closer look and decided it's best to get rid of the `Interprocedural` module altogether.
Since jeremydubreil's refactoring to pass the summaries around everywhere, this module doesn't do much (it used to make sure the summary actually got stored to disk).
Client code is shorter and simpler without this module.
Reviewed By: mbouaziz
Differential Revision: D5255400
fbshipit-source-id: acd1c00
Summary: The docs for this said that it stores the summary to disk, which is no longer true. `compute_summary` is more descriptive of what it actually does now.
Reviewed By: jberdine
Differential Revision: D5245416
fbshipit-source-id: f5138cd
Summary:
Now that we can run several inter-procedural analyses at the same time, we should no longer use the function `Reporting.log_error_deprecated` as it logs the errors in the specs table. This specs table is normally used for caching and will be deprecated in favor of having a cache summaries for the callees in the `Ondemand` module (to avoid deserialising a callee more than once within the same process).
This revision just renames the reporting functions.
Reviewed By: sblackshear
Differential Revision: D5205009
fbshipit-source-id: b066549
Summary: The purpose of the annotation reachability analysis is to report when a method annotated with `X` never calls, directly or indirectly, another method annotated with `Y`. However, there can be different call stacks following different execution paths from `X` to `Y`. Reporting more than one call stack ending with the same annotated procedure does not bring more signal to the end user. So the purpose of this diff is to avoid those duplicated reports and report at most one annotation reachability issue per end of call stack.
Reviewed By: sblackshear
Differential Revision: D4942765
fbshipit-source-id: 46325a7
Summary: The analysis logic was split between the treatment of the instructions and the definition of the domain, making the code more complicated that it should. This diff moves more of the logic into the domain definition and change to variable names to more descriptive ones
Reviewed By: sblackshear
Differential Revision: D4936414
fbshipit-source-id: ff59de7
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary: This was annoying as "jump to next error" was otherwise always jumping to this warning about shadowing `|>`
Reviewed By: sblackshear
Differential Revision: D4767571
fbshipit-source-id: 932145c
Summary: It seems that we were not really using the `Bottom` part of the domain as a pair of (empty call map, empty tracking var map) was already acting as bottom.
Reviewed By: sblackshear
Differential Revision: D4759757
fbshipit-source-id: 53dedfe
Summary: Run all the checkers one after each other, which allows the Infer AI framework to run several checkers together, including the possibility for them to collaborate.
Reviewed By: sblackshear
Differential Revision: D4621838
fbshipit-source-id: e264d67
Summary:
Changes every checker to take a summary as parameter and return the updated summary to the next checker. Since several operations, like `Reporting.log_*` are modifying the summary in memory by loading them from the in-memory cache of summaries, we currently need to rely on `Specs.get_summary_unsafe` to return the updated version of the summary.
This diff allows to change the API of `Reporting` to take a summary as input and progressively remove all the calls `Specs.get_summary_unsafe` independently from adding the possibility to run several checkers at the same time. The final objective to have every checker just passing around the summary of the procedure being analyzed, and having the in-memory cache only use to store the summaries of the callees.
Reviewed By: sblackshear
Differential Revision: D4649252
fbshipit-source-id: 98f7ca7
Summary:
At one point I thought we'd want to have lots of different schedulers for things like exploring loops in different orders, but that hasn't materialized.
Let's make the common use-case simpler by hiding the `Scheduler` parameter inside the `AbstractInterpreter` module.
We can always expose `MakeWithScheduler` later if we want to.
Reviewed By: jberdine
Differential Revision: D4508095
fbshipit-source-id: 726e051
Summary:
The thread-safety and annotation reachibility analyses were defining ugly custom versions of override_exists with refs.
Let's give them a canonical, ref-free version instead.
Reviewed By: jberdine
Differential Revision: D4475777
fbshipit-source-id: 0bb45fc
Summary:
One of the things that confuses me about the current annotations API is that there's a lot of ways to do the same thing.
Some of the concepts like `annotated_signature` are only really needed by Eradicate.
This diff removes usages of `annotated_signature` outside of Eradicate (everyone else was just using `get_annotated_signature` as a roundabout way to get the return annotation of a procedure).
In the future, I'll move `get_annotated_signature` and other Eradicate-specific functionality into its own module inside the Eradicate directory.
Reviewed By: jberdine
Differential Revision: D4472058
fbshipit-source-id: 5bb0846
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Jules Villard
Josh Berdine
Mehdi Bouaziz
Sam Blackshear
Jeremy Dubreil
Jia Chen
Martino Luca
Andrzej Kotulski
Cristiano Calcagno