Summary:
We need to check if `folly::Optional` is not `folly::none` if we want to retrieve the value, otherwise a runtime exception is thrown:
```
folly::Optional<int> foo{folly::none};
return foo.value(); // bad
```
```
folly::Optional<int> foo{folly::none};
if (foo) {
return foo.value(); // ok
}
```
This diff adds a new issue type that reports if we try to access `folly::Optional` value when it is known to be `folly::none`.
Reviewed By: ezgicicek
Differential Revision: D22053352
fbshipit-source-id: 32cb00a99
Summary: This linters were not used much anymore, so we can delete them.
Reviewed By: ngorogiannis
Differential Revision: D22233895
fbshipit-source-id: f31180a05
Summary: There is now a compilation check for UNAVAILABLE_API_IN_SUPPORTED_IOS_SDK so this check is less useful. Also the check REGISTERED_OBSERVER_BEING_DEALLOCATED is useful only in an old version of iOS.
Reviewed By: ngorogiannis
Differential Revision: D22231851
fbshipit-source-id: 72151fef5
Summary:
This diff adds a prototype of a new checker that collects config checkings between markers.
Basically, what the checker is doing is a taint analysis.
* Taint source: function calls of "marker start"
* Taint sink: function calls of config checking
* Taint remove: function calls of "marker end"
By the taint analysis, the analysis results will say that which taints can reach to the sink. In other words, which marker ID that has been started can reach to the config checks, before marker's ending.
I am separating the diff into three steps:
(1/3) Add basic abstract semantics
(2/3) Add trace information
(3/3) Add reporting with test examples
Reviewed By: jvillard
Differential Revision: D21998170
fbshipit-source-id: e7759f62f
Summary:
This diff adds a prototype of a new checker that collects config checkings between markers.
Basically, what the checker is doing is a taint analysis.
* Taint source: function calls of "marker start"
* Taint sink: function calls of config checking
* Taint remove: function calls of "marker end"
By the taint analysis, the analysis results will say that which taints can reach to the sink. In other words, which marker ID that has been started can reach to the config checks, before marker's ending.
I am separating the diff into three steps:
(1/3) Add basic abstract semantics
(2/3) Add trace information
(3/3) Add reporting with test examples
Reviewed By: jvillard
Differential Revision: D21935546
fbshipit-source-id: 092abb92c
Summary: Pulse has now a better version of this check, so let's delete it.
Reviewed By: ngorogiannis
Differential Revision: D22019247
fbshipit-source-id: 344678225
Summary:
This issue type was not giving good results and can be replaced by
Pulse's version.
Reviewed By: ngorogiannis
Differential Revision: D22019551
fbshipit-source-id: 5cf3db46d
Summary: To avoid NULLPTR_DEREFERENCE false positives we want to treat some functions as `abort`. A new flag `--pulse-model-abort` allows us to provide a list of such functions.
Reviewed By: ezgicicek
Differential Revision: D21962555
fbshipit-source-id: d46b93c99
Summary: The new memory leaks analysis is now ready to be enabled by default and turned on in production. This also replaces the biabduction one which is now disabled.
Reviewed By: jvillard
Differential Revision: D21998666
fbshipit-source-id: 9cd95e894
Summary:
Turns out it was useful, so it is now reborn in OCaml.
Fixes https://github.com/facebook/infer/issues/1262.
Reviewed By: skcho
Differential Revision: D22016185
fbshipit-source-id: 31ccb7540
Summary:
Similarly as for issue types, we want to generate the website
documentation from infer itself so we can easily cross-reference
checkers and the issue types they report.
This imports the website documentation written for some (very few) of
the checkers. I wrote some cursory one-liners for the rest.
Reviewed By: dulmarod
Differential Revision: D21934375
fbshipit-source-id: 8c9dc2b08
Summary:
Take all the issue type documentation in the website and add it to infer
itself so it can generate the website (see further diffs).
I mostly generated this diff by writing a script to call from `utop`
with various file lists to do most of the heavy lifting for me and make
sure I didn't forget any issue types: P132800781
Reviewed By: ngorogiannis
Differential Revision: D21934372
fbshipit-source-id: f3ea8c566
Summary:
`infer help` will be used to display information about issue types and
checkers, and to generate the corresponding website documentation. We
can add more things in it over time. The goal is to avoid having to go
read the source code of infer to figure things out that are user-facing.
Reviewed By: ezgicicek
Differential Revision: D21934376
fbshipit-source-id: 2788c5af1
Summary:
We stopped relying on an arbitrary threshold. Hence,
- we don't need all the machinery for reporting at a specific node for a threshold
- we can remove
- the issue type `EXPENSIVE_EXECUTION_TIME`
- the config option `--use-cost-threshold`.
Reviewed By: skcho
Differential Revision: D21859815
fbshipit-source-id: b73a2372d
Summary:
In order to test cost analysis results, currently we rely on having an arbitrary cost threshold (200) and report issues that exceed this cost. For instance, a cost of 201 is considered expensive and reported as `EXPENSIVE_EXECUTION_TIME` issue in cost tests.
This means, if we change the cost analysis in a slight way that results in some constant cost increase under 200, we wouldn't able to detect it. I find this unsatisfactory and somewhat hacky.
This diff adds the ability to write the result of `costs-report.json` into a separate `cost-issues.exp` and then compare the actual costs (not only than relying on this arbitrary threshold reporting mechanism).
Reviewed By: skcho
Differential Revision: D21816312
fbshipit-source-id: 93b531928
Summary:
The option was misleading as it only concerns the biabduction analysis.
Moreover, this is a developer option, and one can already see it by
removing filtering altogether. I think this option was added as the
result of a user request, let's see if anyone notices.
Reviewed By: ezgicicek
Differential Revision: D21686526
fbshipit-source-id: ff383a0ca
Summary:
Don't assign different visibilities to the same issue type dynamically,
use different issue types with always static visibility instead. This is
to be able to document the visibility of each issue type.
Reviewed By: dulmarod
Differential Revision: D21686458
fbshipit-source-id: 876ab4157
Summary:
Introduce BIABD_ prefixes for a few issue types that were duplicated
between analyses, and also prefix the lab exercise issue type to avoid
sharing with biabduction.
Reviewed By: ngorogiannis
Differential Revision: D21660226
fbshipit-source-id: 3435916e6
Summary:
A buck integration for capturing simultaneously clang and java targets.
Just like the java-specific `JavaGenruleCapture` integration, it relies on
dummy targets that depend on the flavoured clang versions.
For example, a `cxx_library` target named `//clang:hello` will have an associated target
called `//clang:hello_infer` that depends on `//clang:hello#infer-capture-all`,
and whose output is a text file containing the output path of the dependency.
Reviewed By: jvillard
Differential Revision: D21620458
fbshipit-source-id: 23919387b
Summary:
`ocamlc` didn't tell us but there are a bunch of dead exceptions in
`Exceptions.ml` that translate into dead issue types.
Found with:
```
for ex in $(grep -o -e '^exception [^ ]*' infer/src/IR/Exceptions.mli | cut -d ' ' -f 2); do git grep -q -e '\braise .*'$ex || git grep -q -e 'Exceptions\.'$ex || echo $ex; done
```
Reviewed By: skcho
Differential Revision: D21618645
fbshipit-source-id: f60a3f445
Summary:
This seems to make sense as it's a separate analysis (that depends on
biabduction). This introduces unpleasant `|| is_checker_enabled TOPL`
whenever we try to figure out if biabduction will run. I think this is a
more general problem that deserves a more general solution to express
the fact that checkers can depend on others, so that, eg,
`is_checker_enabled Purity` is true when we pass `--loop-hoisting`. Will
address in another diff.
Reviewed By: ngorogiannis
Differential Revision: D21618460
fbshipit-source-id: 8b0c9a015
Summary:
We stopped relying on an external perf data file to determine which functions are on the cold start. Let's remove this issue now.
NB: Keeping the `--perf-profiler-data-file` as deprecated to prevent issues on the CI and prod.
Reviewed By: skcho
Differential Revision: D21594150
fbshipit-source-id: faa58782d
Summary:
Pulse is disabled by default anyway so it's safe to enabled it for Java
too.
Also noticed that OCaml is smart enough not to need `Language.` in
frontend of `Clang`/`Java` in all of registerCheckers.ml so delete
these.
Reviewed By: ezgicicek
Differential Revision: D21594364
fbshipit-source-id: 4b561c9a0
Summary:
Just like `CFBridgingRelease` we want to be able to model functions that are specific to a given codebase that make a transfer of memory ownership so that developers don't need to worry about releasing that memory anymore, and hence, we don't want to report leaks on that memory.
Things get a little more complicated, because some of the functions we want to model are in a specific namespace, so with this flag we take both cases into account, when we are dealing with namespaces or not.
Reviewed By: jvillard
Differential Revision: D21404409
fbshipit-source-id: c36bd7afc
Summary:
Because in the real semantics CFRelease can be used more than once, and also the variables can be used after CFRelease in general, modelling this as `free` causes many `USE_AFTER_FREE` errors. Now we change the model to not add the `Invalid CFree` attribute, but to just remove the `Allocated` attribute. So we can model memory leaks in the simple case of `Create` and not `CFRelease` before going out of scope, but we avoid the `USE_AFTER_FREE`.
Since the model for CFRelease now diverges from free, changed the command line option for modelling to `pulse-model-release-pattern`.
Reviewed By: jvillard
Differential Revision: D21324895
fbshipit-source-id: ab323d981
Summary: This diff gets only one disjunct from blacklisted callee, in order to avoid OOMing in specific cases.
Reviewed By: jvillard
Differential Revision: D21406023
fbshipit-source-id: f9214c9c6
Summary:
In the previous diff we changed the semantics of nested classes w.r.t.
to Nullsafe.
Let's make it clear if users will attempt to misuse it.
Reviewed By: artempyanykh
Differential Revision: D21230717
fbshipit-source-id: 0ecc0dd06
Summary: Specialise the above option to `true` and remove resulting dead code.
Reviewed By: dulmarod
Differential Revision: D21177041
fbshipit-source-id: 4a1c65850
Summary: This option makes RacerD angelic wrt the ownership of returned objects from procedures without summary. This will now be made the default and the option deprecated up the diff stack.
Reviewed By: dulmarod
Differential Revision: D21174676
fbshipit-source-id: 9c48d3d7d
Summary:
It is true that `Info` issues are normally not intended for the end user
and in general should be hidden by default.
However, the current behavior - show them only if `--no-filtering` is
true - is super non-intuitive and complicates already complex reporting
logic.
Lets use the general "enable/disable" mechanism for controlling this.
Reviewed By: jvillard
Differential Revision: D21154140
fbshipit-source-id: 69e4c88e4
Summary: The flags `--biabduction-fallback-model-alloc-pattern` and `--biabduction-fallback-model-free-pattern` were unused because we removed the models from .inferconfig a while ago because of too many false positives. We are implementing a better memory leak check based on Pulse, and are adding the similar flags `--pulse-model-alloc-pattern` and `--pulse-model-free-pattern`.
Reviewed By: jvillard
Differential Revision: D21061511
fbshipit-source-id: 1b3476c22
Summary:
This information can be useful for tooling responsible for further
processing (e.g. metric calculation and logging)
Reviewed By: artempyanykh
Differential Revision: D20914583
fbshipit-source-id: 61804d88f
Summary:
This diff limits the depth of abstract location by a constant.
problem: Inferbo generated too many of abstract locations, especially when struct types had many pointer fields and Inferbo was not able to analyze the objects precisely. Since the number of generated abstract locations were exponential to the number of fields, it resulted in OOM in the end.
(reported by zyh1121 in https://github.com/facebook/infer/issues/1246)
Reviewed By: jvillard
Differential Revision: D20818471
fbshipit-source-id: f8af27e5c
Summary:
It's easy to create large arrays in code, eg `int x[1UL << 16];`, but
these can generate huge nodes in SIL because zero-initialization is
translated by zero-ing structures element by element. Introduce a
builtin to use instead. Keep the naive method for small structures (with
a configurable limit on "small").
Reviewed By: dulmarod
Differential Revision: D20836836
fbshipit-source-id: 6bf5410f8
Summary:
Re-implement the generation of an HTML report (with bug traces) in
OCaml.
Kills the --only-show as a side-effect, it is of dubious use since there
is already infer-out/report.txt to get the report list as text. A
follow-up diff adds numbers to the list in infer-out/report.txt for easy
cross-referencing with `infer explore --select 123`.
Reviewed By: skcho
Differential Revision: D20672769
fbshipit-source-id: 39b3a299d
Summary:
Hopefully no one uses this. This is in Python and we'd like to get rid
of it. Easy enough to either re-implement if needed or to be
re-implemented by a third party.
Reviewed By: ngorogiannis
Differential Revision: D20626344
fbshipit-source-id: 484022482
Daiva Naudziuniene
Dulma Churchill
Jules Villard
Sungkeun Cho
Ezgi Çiçek
Nikos Gorogiannis
Mitya Lyubarskiy