Summary:public
The reactive analysis starts from the set of changed files/procedures, and proceeds
reactively to analyze their dependencies.
This means that after every command, the set of changed files/procedures is reset.
With the --continue option, the capture is continued: all the files/procedures marked
as changed stay changed, plus any additional changes are recorded.
In addition to allowing to spread capture over several commands, the option also allows to separate capture and analysis in reactive mode, or to repeat the analysis.
Reviewed By: sblackshear
Differential Revision: D3046361
fb-gh-sync-id: b6e3797
shipit-source-id: b6e3797
Summary:public
Use the configuration file .inferconfig to model the library method that are considered expensive
Reviewed By: cristianoc
Differential Revision: D3045288
fb-gh-sync-id: e58d85c
shipit-source-id: e58d85c
Summary:public
Create initial model of C++ std::shared_ptr. This means that infer will replace implementation of
shared_ptr and the resulting binary will change. Make sure no one will run it by crashing any binary that includes that code.
Reviewed By: jvillard
Differential Revision: D2999948
fb-gh-sync-id: 5753559
shipit-source-id: 5753559
Summary:public
Simplifies the code to collect the `SuppressWarnings` annotations and makes the code more robust in the sense that not finding the output of the annotation processor will result in an error directly at the top-level instead of later on when trying to load the output file in the Java frontend.
Reviewed By: sblackshear
Differential Revision: D3034690
fb-gh-sync-id: 60caa0c
shipit-source-id: 60caa0c
Summary:public
bugs.txt only contains the summary of each report. The terminal output contains
a bit more information, such as source excerpts. If one wants to save the
terminal output into a file, they can always use shell redirection anyway.
closes#294
Reviewed By: martinoluca
Differential Revision: D3023796
fb-gh-sync-id: 9a21d17
shipit-source-id: 9a21d17
Summary:public
Instead of using the collection of suppress warnings annotations to filter out the errors while generating the error reports, we just add this SuppressWarnings at translation time, like any other annotations, and the reporting functions in the Reporting module will just skip the errors when the method is annotated with SuppressWarnings.
This allows us to have a suppress warnings mechanism that is independant from the integration with the build system.
Reviewed By: sblackshear
Differential Revision: D3012395
fb-gh-sync-id: 35f5f9b
shipit-source-id: 35f5f9b
Summary:public
With this change, all the `infer-deps.txt` files generated by buck for those targets
running with the `#infer` flavor, will be merged into one `infer-deps.txt` located in the
designated output folder.
Reviewed By: jvillard
Differential Revision: D2994397
fb-gh-sync-id: 14d8109
shipit-source-id: 14d8109
Summary:public
Lazy dynamic dispatch handling works as follows:
Assuming a call of the form:
foo(a);
where the static type of `a` is `A`. If during the symbolic execution, the dynamic type of the variable `a` is `B` where `B <: A`, then we create on-demand a copy `foo(B)` of `foo(A)` where all the uses of the typed parameter `a` are replaced with a parameter of type `B`. Especially, if `foo` contains virtual call, say `get` where `a` is the receiver, then the call gets redirected to the overridden method in `B`, which simulates the runtime behavior of Java.
This lazy dynamic dispatch mode is only turn on for the tracing mode for now in order to avoid conflicts with sblackshear's approach for sound dynamic dispatch.
Reviewed By: sblackshear
Differential Revision: D2888922
fb-gh-sync-id: 3250c9e
shipit-source-id: 3250c9e
Summary:public
Deprecate the incremental mode.
Several parts of the back-end can be removed.
The options for incremental analysis -i at the python level are now deprecated, and re-routed to --reactive.
The main difference with --reactive is that it does not produce an analysis of the whole project, but is limited to what is reachable via reactive propagation starting from the changed files.
Reviewed By: sblackshear
Differential Revision: D2960078
fb-gh-sync-id: 6e8b46b
shipit-source-id: 6e8b46b
Summary:public
An observer object that registered to a notification center needs to be
unregistered before it is deallocated.
If not, the notification center may send a notification to a gost object.
This diff introduce a checker for this problem.
Reviewed By: dulmarod
Differential Revision: D2949692
fb-gh-sync-id: 1653cec
shipit-source-id: 1653cec
Summary:public
`print(tracer)` has an automatic conversion to string that was missed when
migrating to `utils.stdout(tracer)`.
Reviewed By: peterogithub
Differential Revision: D2982104
fb-gh-sync-id: 4c26727
shipit-source-id: 4c26727
Summary:public
- s/"/'/ in python strings
- kill `utils.error()` in favour of the new, identical `utils.stderr()`
- one more `print(utils.encode())` to `utils.stderr()` conversion
Reviewed By: jeremydubreil
Differential Revision: D2976710
fb-gh-sync-id: 6c0fdfa
shipit-source-id: 6c0fdfa
Summary:public
This class expects a working `jwlib.CompilerCommand` even when we're not doing
anything Java-related. Split the java-specific functionality into a new child
class in jwlib.py.
Reviewed By: jeremydubreil
Differential Revision: D2965832
fb-gh-sync-id: e895b33
shipit-source-id: e895b33
Summary:public
java-specific code such as this belongs in jwlib.py. It will also help the
refactoring in the next diff.
Reviewed By: sblackshear
Differential Revision: D2965814
fb-gh-sync-id: c3adc03
shipit-source-id: c3adc03
Summary:public
This will avoid a circular dependency between analyze.py and jwlib.py in an
upcoming refactoring.
Reviewed By: martinoluca
Differential Revision: D2965734
fb-gh-sync-id: 1cb69d4
shipit-source-id: 1cb69d4
Summary:public
This attempts to properly sanitise text input/output in the Python parts of
infer. Do three things:
- encode user input (coming from the command-line or reading files)
- decode infer output
- in both cases, we may be using the wrong encoding, eg: locale says we're in
ascii, but the source code contains utf-8. In many cases, like error
messages, it's safe to ignore these encoding mismatches.
Also, since we `import __future__.unicode_literals`, it's safe to remove `u'`
prefixes on many unicode literals.
Reviewed By: martinoluca
Differential Revision: D2960493
fb-gh-sync-id: 9812d7d
shipit-source-id: 9812d7d
Summary:public
When compiling projects with this macro set to 1 (which is default on my mac),
infer couldn't get specs for some calls. They were replaced with
different functions by preprocessor.
Reviewed By: ddino
Differential Revision: D2944618
fb-gh-sync-id: df8b457
shipit-source-id: df8b457
Summary:public
Add command-line argument --reactive to enable reactive propagation mode.
When the mode is active, the files changed during compilation are detected, and the analysis propagates reactively starting from the modified files.
The reactive mode allows to analyze a subset of the files in a project and follow their dependencies, without storing the results of previous analyses (specs files). Captured files are preserved from previous runs of the analysis (for example, when the previous analysis was the initial capture), so the mode can be used repeatedly while changing code.
Reviewed By: jvillard
Differential Revision: D2931697
fb-gh-sync-id: 9d6dda0
shipit-source-id: 9d6dda0
Summary:
public
The analysis of the Buck project was failing because this script converts the aliases into their expanded target names. It turns out that for Buck, the name of the command is `buck` and the name of the alias is also `buck`, which led to conflicts. This is now fixed by only replacing the targets in the part of the command line that is after `build` in `buck build ...`
Reviewed By: sblackshear
Differential Revision: D2914446
fb-gh-sync-id: ddce4ed
shipit-source-id: ddce4ed
Summary:
public
The PerformanceCritical Checker was not running on Buck project due to a conflict between the incremental mode and the ondemand mode.
Reviewed By: cristianoc
Differential Revision: D2891649
fb-gh-sync-id: 0a503d8
Summary:
public
- add to json reports the location in the ocaml code of assertions raised
during the analysis
- only add when in debug mode. For this, add a flag to `InferPrint` that is
passed by the toplevel `infer` whenever `infer -g` is used.
Reviewed By: jeremydubreil
Differential Revision: D2891286
fb-gh-sync-id: ad4577c
Summary:
public
The env variables used by the Infer backend were only passed in multicore mode. They are now passed before the generation of clusters, whether in single core mode or in multicore mode.
Reviewed By: cristianoc
Differential Revision: D2891816
fb-gh-sync-id: 25074af
Summary:
public
When no classpath was specified, Infer were considering it to be None instead of the current directory. The consequence is that we were replacing the current directory with the annotation processor for suppress warnings, leading to cases where `javac` was compiling fine but `infer -- javac` was failing with classes not found compilation issues. This diff fixes by always having at least "." in the classpath.
Reviewed By: sblackshear
Differential Revision: D2853035
fb-gh-sync-id: e69db7c
Summary:
public
I previously forgot to keep this feature when deleting BuckAnalyze.
Reviewed By: sblackshear
Differential Revision: D2850869
fb-gh-sync-id: d23f1ca
Summary:
public
The script `BuckAnalyze` has been deprecated for a while already. Time to remove it.
Reviewed By: sblackshear
Differential Revision: D2844414
fb-gh-sync-id: b5e1195
Summary:
public
The code to configure to configure the logging was duplicated, but was not not doing exactly the same thing. This diff makes all the code to call the same configuration function.
Reviewed By: sblackshear
Differential Revision: D2844361
fb-gh-sync-id: 9887cad
Summary:
This will stop Infer from creating an `infer-out` directory when just running `infer`.
(I run `infer` without any arguments somewhat often to look at documenting.)
One downside to this is that there will be no logs when running Infer without any commands - is this bad?
Closes https://github.com/facebook/infer/pull/240
Reviewed By: cristianoc
Differential Revision: D2829752
Pulled By: jeremydubreil
fb-gh-sync-id: 6827ef9
Summary:
public
In the case of Buck, the integration works by using the out directory of javac in order to store the analysis artifacts in the jar file. Making buck call:
infer -o infer_out -- javac -d classes_out ...
instead of every javac command is having no effect and is the same as Buck running:
infer -- javac -d classes_out ...
Reviewed By: sblackshear
Differential Revision: D2822642
fb-gh-sync-id: b13e067
Summary:
public
In the case of Java, the name of the method is enough to lookup the summary of the callees and run the symbolic execution. This revision separates the case of method call in Java and in C, C++ and Objective C. Most of the code for executing method calls was Clang specific and this is an intermediate step to be able to run the capture and analysis on demand.
Reviewed By: sblackshear
Differential Revision: D2809171
fb-gh-sync-id: da62dce
Summary:
public
`json.dump` does not have the same number of arguments in 2.7.3 and 2.7.9. Fix
this by naming the optional parameters explicitly.
Reviewed By: akotulski
Differential Revision: D2760579
fb-gh-sync-id: 7ebc69e
Summary: public
Since we are only running the analysis on the Buck targets that are of type java_library or android_library, it may happen that the filtering gives an empty list of targets.
This diff does two things:
1) it filters out the empty strings `''` that can be returned when parsing the `buck query` command, and
2) skip the analysis when the list of targets to analyze is empty.
It also fixes the debug output for the list of targets to analyze, which was previously always printing the list of targets passed in the command line argument, which led for this issue to be unoticed even though it may have been there for a while already.
Reviewed By: sblackshear
Differential Revision: D2704949
fb-gh-sync-id: 83c62d8
Summary: public
With this change it will be possible to instruct Buck to not analyze certain files whose names match
with the regex passed in input.
So for example if you want to skip the analysis of files containing `skip_me` on their names, then
the command:
infer --use-flavors --blacklist-regex ".*skip_me.*" -- buck build <target-name>
will do it, because the `.*skip_me.*` regex will match the desired rule.
Reviewed By: jvillard
Differential Revision: D2702872
fb-gh-sync-id: 498b17b
Summary: public
When merging json reports from different buck targets, the same bug may be
reported several times.
Clean up some bug sorting functions while I'm at it.
Reviewed By: martinoluca
Differential Revision: D2690665
fb-gh-sync-id: 4a12072
Summary: public
-Wno-error flag doesn't turn off errors which were turned on using -Werror=$WARN_TYPE.
In order to turn these off we'd have to add -Wno-error=$WARN_TYPE for each warning type.
So instead, turn off all warnings so they can't get elevated to error
Reviewed By: jvillard
Differential Revision: D2690810
fb-gh-sync-id: 7d6611f
Summary: public
Refactor reporting of errors to enhance readability and reuse.
Reviewed By: jeremydubreil
Differential Revision: D2679676
fb-gh-sync-id: f4c1cba
Summary: public
With this change, it will be possible to pass to InferAnalyze a list of folders to be
searched for spec files, through a file containing those paths, separated by the newline
character.
For example, if there's a `PathList.txt` file containing
/path/to/specs/folder1
/path/to/specs/folder2
/path/to/specs/folder3
Then invoking `infer --specs-dir-list-file PathList.txt [--other_args, ...] -- <build_cmd>`
will instruct the analyzer to lookup to those three folders whenever it searches for specs.
It's important to note that since the analyzer runs in parallel from different locations, it's necessary to pass **absolute** paths, or the analyzer will fail with an error.
Reviewed By: jvillard
Differential Revision: D2668700
fb-gh-sync-id: b407a57
Summary: public
This function is useful to understand how infer prints reports, it's worth
cleaning it up a notch.
Reviewed By: jeremydubreil
Differential Revision: D2646878
fb-gh-sync-id: 2ecd894
Summary: public so that we don't get thousands of memory leaks in debug mode.
We will still get them if we pass ml_bucket internal.
Reviewed By: jvillard
Differential Revision: D2648200
fb-gh-sync-id: 8dce66f
Summary: public
This is the first of a series of patches that reorganise the inferlib package
into a bunch of smaller modules.
Reviewed By: martinoluca
Differential Revision: D2641917
fb-gh-sync-id: 19788b5
Summary: public
but keep the copy-pastability by wrapping the list into a small standalone
script that can be copy-pasted on the command line.
Reviewed By: jeremydubreil
Differential Revision: D2636536
fb-gh-sync-id: 7c689e2
Summary: public
These were only present in a few files. Could be added back on all files if
someone uses them.
Reviewed By: martinoluca
Differential Revision: D2646803
fb-gh-sync-id: edd6c43
Summary: public
This also fixes an issue with utf-8 in source code, as the csv report filters
out non-ascii characters.
Reviewed By: akotulski
Differential Revision: D2641727
fb-gh-sync-id: 3ca6dc6
Summary: public
This should avoid confusion between the toplevel "infer" python script and
inferlib/infer.py.
Reviewed By: jeremydubreil
Differential Revision: D2637087
fb-gh-sync-id: 82ce2a4
Summary: public
Print "Capturing..." message, and some info in case it fails, eg:
$ cd examples/android_hello/
$ infer -- ./gradlew build
Running and capturing gradle compilation...
[... stuff ...]
$ infer -- ./gradlew build
Running and capturing gradle compilation...
Nothing to compile. Try running `./gradlew clean` first.
Reviewed By: jeremydubreil
Differential Revision: D2637024
fb-gh-sync-id: 0e8867d
Summary: public
When analysing projects we would not always display the numbers of procs and
files analysed. This fixes it, and also prints the stats before the reports for
readability. This way we also don't need to print "Analysis done" anymore.
Before:
$ infer -- gcc -c hello.c
Starting analysis (Infer version git-436690cf022a16313dda8447121a5934529e6e5c)
Analysis done
hello.c:5: error: NULL_DEREFERENCE
pointer s last assigned on line 4 could be null and is dereferenced at line 5, column 3
3. void test() {
4. int *s = NULL;
5. > *s = 42;
6. }
After:
$ infer -- gcc -c hello.c
Starting analysis (Infer version git-5b7ff3ac10d58e7ffd17c44574ab330ed07cb188)
Computing dependencies... 100%
Analyzing 1 cluster. 100%
Analyzed 1 procedure in 1 file
Found 1 issue
hello.c:5: error: NULL_DEREFERENCE
pointer s last assigned on line 4 could be null and is dereferenced at line 5, column 3
3. void test() {
4. int *s = NULL;
5. > *s = 42;
6. }
Also looked at the results on buck and gradle
Reviewed By: cristianoc
Differential Revision: D2636991
fb-gh-sync-id: 32b9a7c
Summary: public
This cleans up the output of infer. Before:
$ touch empty.c
$ infer -- gcc -c empty.c
Starting analysis (Infer version git-436690cf022a16313dda8447121a5934529e6e5c)
Analysis done
No issues found
$ infer -- javac Hello.java
Starting analysis (Infer version git-436690cf022a16313dda8447121a5934529e6e5c)
Analysis done
Hello.java:4: error: NULL_DEREFERENCE
object s last assigned on line 3 could be null and is dereferenced at line 4
2. int test() {
3. String s = null;
4. > return s.length();
5. }
6. }
Analyzed 2 procedures in 1 file
$
After:
$ infer -- gcc -c empty.c
Starting analysis (Infer version git-434faa7f70f6b9498615d3ead8c12bcfec6fc553)
Analyzing 0 clusters
Analysis done
No issues found
$ infer -- javac Hello.java
Starting analysis (Infer version git-434faa7f70f6b9498615d3ead8c12bcfec6fc553)
Computing dependencies... 100%
Analyzing 1 cluster. 100%
Analysis done
Found 1 issue
Hello.java:4: error: NULL_DEREFERENCE
object s last assigned on line 3 could be null and is dereferenced at line 4
2. int test() {
3. String s = null;
4. > return s.length();
5. }
6. }
Analyzed 2 procedures in 1 file
$
Also tested with buck, gradle.
Reviewed By: cristianoc
Differential Revision: D2636969
fb-gh-sync-id: 52f06f0
Summary: public
Use InferPrint to generate infer-out/report.json instead of converting
infer-out/report.csv. The json may soon contain more info than the CSV.
Reviewed By: jeremydubreil
Differential Revision: D2603775
fb-gh-sync-id: f141dfe
Summary: public
paths look a bit silly prior to this diff, as they go up from infer/ to go back
into infer/ right away, eg:
/home/jul/infer/infer/lib/python/inferlib/../../../../infer/lib/java/processor.jar
This changes this path to the less silly:
/home/jul/infer/infer/lib/python/inferlib/../../../lib/java/processor.jar"
Reviewed By: martinoluca
Differential Revision: D2631775
fb-gh-sync-id: 6df5d4d
Summary: public
This makes it a bit easier to diagnose errors. This is how it looks:
infer -- javac IDontExist.java
"javac" "-g" "-cp" "/home/jul/infer/infer/lib/python/inferlib/../../../../infer/lib/java/processor.jar" "-d" "/home/jul/infer/examples" "IDontExist.java" "-J-Duser.language=en"
This is how it used to look:
['javac', '-g', '-cp', u'/home/jul/code/infer/infer/bin/../lib/java/processor.jar', '-d', '/home/jul/infer/examples', 'IDontExist.java', '-J-Duser.language=en']
Reviewed By: jberdine
Differential Revision: D2631698
fb-gh-sync-id: 09903df
Summary: public
Add colored output if pygments is installed on the system.
Reviewed By: cristianoc
Differential Revision: D2601509
fb-gh-sync-id: 0fa8e9f
Summary: public
Now that we have modules, we can gather string constants in one place only.
Reviewed By: jeremydubreil
Differential Revision: D2615791
fb-gh-sync-id: 7cc21e4
Summary: public
This unclutters infer/bin/ and gives more structure to infer/lib/
Reviewed By: jeremydubreil
Differential Revision: D2605809
fb-gh-sync-id: 508fc2c
Summary: public
Adding initial support for Buck for Cxx on the toplevel infer command.
If a `cxx_binary`/`cxx_library` builds with the command `buck build //targetName:target` then the analysis of Infer can be triggered through the `#infer` flavor.
This change configures buck to run Infer, whenever the `#infer` flavor gets passed: just run
`infer --use-flavors -- buck build //targetName:target#infer`
Please note that when using this feature (`--use-flavors`), the toplevel `infer` command has to be launched from the root of the buck project (which is where the `.buckconfig` file is located) and the `#infer` flavor must be passed on the target.
Reviewed By: jvillard
Differential Revision: D2508296
fb-gh-sync-id: 63c0dea
Summary: public
The option `-a compile` was previously doing the same thing as `-a capture`. This option is very useful to debug the integration with the build systems.
Reviewed By: jvillard
Differential Revision: D2554816
fb-gh-sync-id: 95f32c2
Summary: @public
Fix issues when compiling for armv7k architecture, replacing it with armv7;
Removing also unsupported flags `-fembed-bitcode-marker`, `-mwatchos-version-min` that cause compilation failures.
Reviewed By: @akotulski, @jvillard
Differential Revision: D2507687
Summary:
See D2465673, replacing `-gmodule` with equivalent flags, as per http://reviews.llvm.org/D11958
The `-fmodule-format` is not available on Xcode's clang, so skip it for now.
Summary:
When you run "gradle build", it builds both the
debug and the release configurations for an app. This causes capture
to run twice for some files and tricks the incremental analysis into
marking the double-captured files as unchanged. This diff fixes the
issue by only doing capture once on a set of commands that are identical
up to the "debug/release" configuration.
Summary:
Use the new clang plugin that outputs biniou instead of Yojson. This binary format is more compact, which makes the frontend a little faster (5 to 10%).
@update-submodule: facebook-clang-plugins
Summary:
The current way gradle plugin works is by parsing the verbose output to figure out which files to compile. This becomes a problem when the number of files exceed allowed argument parameter
length. Use javac's @sources file instead.
This patch will leave the tempfiles behind (also noted by Jyrki during the review), however I would like to leave that to a follow up commit and first make sure the tool works for people experiencing this problem.
Fixes#22
Closes https://github.com/facebook/infer/pull/131
Github Author: =?UTF-8?q?Deniz=20T=C3=BCrkoglu?= <deniz@spotify.com>
Summary: @public JavacCapture does not have an args field, which crashes Python with an AttributeError if we hit self.args.debug. Replaced with the correct expression.
Test Plan: Cause AttributeError with small test case, error no longer happens after fix
Summary:
@public
Using InferBuiltins.assume previously caused an assertion failure in the analyzer. Fixed this, and fixed the implementation of the assume builtin to block when the assumed condition cannot hold.
Test Plan: Added several new tests.
Summary:
@public
Add some logging to the script and capture modules so it is easier to troubleshoot.
What will be logged:
versions of infer, platform, versions of java, build systems etc.
In the future we will add more info that we might find useful while troubleshooting
Test Plan:
run infer with gradle, ant, buck, xcode, mvn and see the logging output
Run symbolic link pointing to infer:
[INFO] Path to infer script /Users/akotulski/tmp/infer_link (/Users/akotulski/infer/infer/bin/infer)
Summary:
@public
This will enable support for the same set of arguments already supported by the `make` module, e.g. `--frontend-stats`, `--frontend-debug`
Test Plan:
Tested on an Xcode project with the `-fs` argument, and checked that `.astlog` files have been generated on the same location of the .o files
infer -fs -- xcodebuild -workspace Project.xcworkspace -scheme Project -sdk iphonesimulator
Summary:
@public
This is a workaround to a clang crash that happens whenever `-fmodules` and `YojsonASTExporter` are used together.
This workaround, uses the `-plugin` argument instead of `-add-plugin` one for the clang frontend, and as a result of that, it overrides the default action of clang, which means no object files are emitted, but just the AST.
To generate the missing data needed by the subsequent building phases of xcodebuild, we run Apple's clang.
Test Plan:
Compiled project containing Pods and `@import`, through a command of the form:
infer -- xcodebuild -workspace project_name.xcworkspace -scheme project_name -sdk iphonesimulator
Cristiano Calcagno
jrm
Andrzej Kotulski
Jules Villard
Dulma Rodriguez
martinoluca
Dino Distefano
kstreee
Josh Berdine
Sam Blackshear
Tony Cosentini
Rohan Jacob-Rao
Irene Papakonstantinou
=?UTF-8?q?Deniz=20T=C3=BCrkoglu?=
Open Source Synchronization