Summary: One step towards elminating the unsafe cache of procedure summaries in `Summary` and only rely on the one in `Ondemand`
Reviewed By: dulmarod, jvillard
Differential Revision: D8619782
fbshipit-source-id: 4096390
Summary:
This was spammy, especially for errors which we already know about and are
caught by the frontend (then the error message would be displayed about a
translation error without context about what the error was).
Reviewed By: dulmarod
Differential Revision: D8640145
fbshipit-source-id: 8b8b8a7
Summary:
The motivation is in a following diff: ensuring symbols do not cross procedure boundaries.
- This diff rewrites `Bound.subst` to be based on the substituted bound rather than folding on the symbol map.
- This way we are sure all symbols are substituted and no symbols from another procedure remains in the result.
- All cases from the previous version should still be here, I think I added a few constant approximations of minmax substituted with minmax (that would be return Top).
Side-effects (good):
- `mult_const` has also more constant approximations for minmax,
- substitution should be faster
Reviewed By: jvillard
Differential Revision: D8369993
fbshipit-source-id: 6ed8be8
Summary:
This changes the behaviour back to before the "fork once then pipe new tasks
for each source files" era: before that we would fork once per source file,
which had the effect of emptying the caches for every source file. Without this
the caches can grow unchecked.
This is probably suboptimal but should at least be the same behaviour as before.
Reviewed By: jeremydubreil
Differential Revision: D8615124
fbshipit-source-id: 69fc101
Summary:
- Do not add actuals of a call as unstable.
- Replace access trie with simple set of paths, which is easier to debug/argue correct.
- Fix bug where a prefix path was searched, as opposed to a *proper* prefix.
- Restrict interface to the minimum so that alternative implementations are easier.
Reviewed By: ilyasergey
Differential Revision: D8573792
fbshipit-source-id: 4c4e174
Summary: This prevents the task bar from scrolling the terminal in case the lines are not wide enough. Instead it will truncate the display to the terminal size. Also display only the most useful info when there is not much room.
Reviewed By: jeremydubreil
Differential Revision: D8590580
fbshipit-source-id: e12d5c9
Summary: `make deadcode` complains about circular dependencies but it works. Document mystery and remove dead code that was introduced while the tests were broken.
Reviewed By: da319
Differential Revision: D8590961
fbshipit-source-id: b52e290
Summary:
Previously we would block indefinitely waiting for that child to send us an
update. Now errors in the child are caught and the main process dies, taking
everyone down with it.
When a child dies, it sends a "Crash" message to the parent, unless it died
receiving a signal (like a segmentation fault, or an external signal). In that
case, the OCaml runtime won't get a chance to notice its death and send the
"Crash" message. Thus, always check if some child has died from under us as
well.
Reviewed By: mbouaziz
Differential Revision: D8577095
fbshipit-source-id: 519992b
Summary: C/C++ code can, in some cases, generate a large number of temporary (Sil) variables. Since we are already not reporting races on these, not recording them gives some perf back.
Reviewed By: mbouaziz, jvillard
Differential Revision: D8566999
fbshipit-source-id: 148ac46
Summary: Trying to convert a large int literal to an OCaml int raises an exception. The use case here actually needed a float anyway, so add an API for that.
Reviewed By: jeremydubreil
Differential Revision: D8550410
fbshipit-source-id: 382495b
Summary:
We inline the .ml and the .mli together using the .cmi rule (for reasons
explained in the Makefile of deadcode). This relies on the fact that rules will
start from the .cmx, which in turns depends on the .cmi as the last dependency
and so all the dependencies of the .cmx are satisfied by the time we hit the
.cmi. But that doesn't always work.
For some reason, making the .cmi depend on its .cmx works, even though it's
supposed to include a circular dependency (`make` should complain but doesn't).
Oh, well...
Reviewed By: jeremydubreil
Differential Revision: D8548032
fbshipit-source-id: 0dc9335
Summary:
Replace the previous outputting of "." and "F" with an actual progress bar and
a multiline display of what procedure each process is currently busy analysing.
Observe:
```lang=text
Found 19 source files to analyze in /home/jul/code/openssl-1.1.0d/infer-out
7/19 [######################......................................] 36%
⊢ [ 1.14s] crypto/mem.c: CRYPTO_malloc
⊢ [ 1.68s] crypto/o_time.c: julian_adj
⊢ [ 0.50s] crypto/mem.c: CRYPTO_zalloc
⊢ [ 1.80s] crypto/o_str.c: OPENSSL_strlcpy
```
This works by setting up a worker pool (as before) that waits to receive jobs
(not as before: we used to fork for each new job). Unix pipes are used for
communication.
The new worker pool can be used to experiment with other concurrency models,
such as reviving per-procedure-parallelism, or making sure each procedure is
analysed only once.
Perf tests indicate that this version is no slower than the previous one,
either on laptops or devserver: about 3% worse user time but ~40% better system time.
This new version forks <jobs> processes whereas the previous version would
fork `O(number of source files)` times.
`infer -j 1` shows a progress bar that doesn't update timing info (because it
would need a second process to do that).
Reviewed By: mbouaziz
Differential Revision: D8517507
fbshipit-source-id: c8ca104
Summary:
The execution environment is really just a cache. It happens to point to a
particular source file which is where the analysis was started from, but that
is not relevant, and in fact is confusing because it suggests that it is
somewhat tied to that file. In reality, exe_env caches information about any
procedure and source file encountered by the analysis.
This will make it easier to make further changes but I think it also brings a
bit more clarity to the code.
Reviewed By: jeremydubreil
Differential Revision: D8513735
fbshipit-source-id: f4b38ce
Summary: Record that it is not supported: https://github.com/facebook/infer/issues/8
Reviewed By: mbouaziz, dulmarod
Differential Revision: D8442762
fbshipit-source-id: fa271cb
Summary: This makes more sense and avoids printing a pointless backtrace. Give the user some advice while we're at it.
Reviewed By: mbouaziz
Differential Revision: D8442711
fbshipit-source-id: 65a8939
Summary: It's been deprecated for a while now. Use `infer analyze` instead.
Reviewed By: dulmarod
Differential Revision: D8442682
fbshipit-source-id: 0b8c590
Summary:
I realized that control variable analysis was broken when we had multiple back-edges for the same loop. This is often the case when we have a switch statement combined with continue in a loop (see `test_switch` in `switch_continue.c`) or when we have disjunctive guards in do-while loops.
This diff fixes that by
- defining a loop by its loophead (the target of its backedges) rather than its back-edges. Then it converts back-edge list to a map from loop_head to sources of the loop's back-edges.
- collecting multiple guard nodes that come from potentially multiple exit nodes per loop head
In addition, it also removes the wrong assumption that an exit node belongs to a single loop head.
Reviewed By: mbouaziz
Differential Revision: D8398061
fbshipit-source-id: abaf288
Summary: Code auto generated by annotation processors or by the compiler is creating non-actionable reports, so skip it for now.
Reviewed By: jeremydubreil
Differential Revision: D8395781
fbshipit-source-id: 9832814
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8395399
fbshipit-source-id: b4bb48c
Summary:
We need to report on non-private methods (the opposite even leads to FPs sometimes on deadlocks). To do this, the domain needs to change so that the interpretation of an order pair `a,b` is no longer "lock `a` is taken in the *current method* and held until lock `b` is taken". Instead the meaning is now "lock `a` is taken in some method *of the same class with the current method* and is held until `b` is taken".
These changes are quite drastic because the previous implementation optimised extensively around the previous use case.
Reviewed By: mbouaziz
Differential Revision: D8395351
fbshipit-source-id: a2bd22b
Jeremy Dubreil
Martin Trojer
Jules Villard
Dulma Churchill
Mehdi Bouaziz
Ezgi Çiçek
Daiva Naudziuniene
Nikos Gorogiannis
Martino Luca
Sungkeun Cho