Summary: This should not affect the analysis results so there is no need to raise an exception here. We can always add this unsigned shift operator to SIL if we want the analysis to take them into account
Reviewed By: sblackshear
Differential Revision: D5703792
fbshipit-source-id: 739891f
Summary:
This approach was requiring the `InferArray` class to always be part of the classpath, and the only benefit was to preserve the length of the arrays, when known, on calls to `clone()` method. However, adding it to the models would create circular dependencies between the models, the builtins and the tests.
The code is now simpler and we can more aggressively fail when classes that are supposed to be found from the classpath are not found.
Reviewed By: sblackshear
Differential Revision: D5703173
fbshipit-source-id: 3e6cea5
Summary:
I'm working on parameterizing access trees with a config that will limit max depth + perhaps width if needed.
This is a stepping stone to enforcing max depth.
Reviewed By: jvillard
Differential Revision: D5693453
fbshipit-source-id: c15b0ee
Summary:
Rather than printing the footprint using its actual representation (an access trie with bool nodes), print it as a set of access paths.
This makes it easier to read sources in Quandary specs/debug Quandary.
Reviewed By: jeremydubreil
Differential Revision: D5682630
fbshipit-source-id: ac55b7f
Summary:
Add `is_empty` to `AbstractDomain.WithBottom` sig and use the empty checks for nicer printing of access trees: don't print empty nodes/traces.
This should make it easier to debug Quandary; it's pretty hard to stare at an access tree and see what's going on right now.
Reviewed By: jberdine
Differential Revision: D5682248
fbshipit-source-id: 56d2a9d
Summary:
This gets rid of the horrible hack of asking jbuilder to build
_build/{default,test}/.ppx/ppx_compare/ppx.exe prior to starting several
jbuilds in parallel. We now refrain from starting several jbuilds in parallel.
Also, I finally understood that order-only deps do nothing for phony targets,
and not much else for non-phony ones. I hate make even more.
Reviewed By: jberdine
Differential Revision: D5678699
fbshipit-source-id: 52179e8
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary: In case of syntax errors in AL files, stdout will contain a JSON list with all files affected by the errors, including info like filename and line number.
Reviewed By: dulmarod, jvillard
Differential Revision: D5640272
fbshipit-source-id: 569b16d
Summary:
A function can both be a sink and propagate source info, but we currently ignore the summary for any function that is also a sink.
This will cause us to under-report for (e.g.) `src1 = source(); src2 = strcpy(dest, src1); exec(src2)`.
This is both a potential buffer overflow and a potential shell injection, but we won't report the second issue.
Reviewed By: jberdine
Differential Revision: D5676167
fbshipit-source-id: 232ab2f
Summary:
We now represent the footprint with an access trie, so this code is no longer required.
This lets us simplify things a bit
Reviewed By: jberdine
Differential Revision: D5664484
fbshipit-source-id: c35edf2
Summary:
In looking at summaries that Quandary took a long time to compute, one thing I notice frequently is redundancy in the footprint sources (e.g., I might see `Footprint(x), Footprint(x.f), Footprint(x*)`).
`sudo perf top` indicates that joining big sets of sources is a major performance bottleneck, and a large number of footprint sources is surely a big part of this (since we expect the number of non-footprint sources to be small).
This diff addresses the redundancy issue by using a more complex representation for a set of sources. The "known" sources are still in a set, but the footprint sources are now represented as a set of access paths (via an access trie).
The access path trie is a minimal representation of a set of access paths, so it would represent the example above as a simple `x*`.
This should make join/widen/<= faster and improve performance
Reviewed By: jberdine
Differential Revision: D5663980
fbshipit-source-id: 9fb66f8
Summary:
The previous widening operator added stars to the *end* of paths that existed in `next` but not `prev`. This is not enough to ensure termination in the case where the trie is growing both deeper and wider at the same time.
The newly added test demonstrates this issue. In the code, there's an ever-growing path of the form `tmp.prev.next.prev.next...` that wasn't summarized by the previous widening operator. The new widening is much more aggressive: it replaces *any* node present in `next` but not `prev` with a `*` (rather than trying to tack a star onto the end). This fixes the issue.
This issue was causing divergence on tricky doubly-linked list code in prod.
Reviewed By: jeremydubreil
Differential Revision: D5665719
fbshipit-source-id: 1310a92
Summary:
Saw these two types of errors before (but they're hard to reproduce locally) when building the models:
- `ERROR: Zip.Error("/mnt/btrfs/trunk-git-infer-739-1503054473/infer/bin/../lib/java/models.jar", "", "end of central directory not found, not a ZIP file")`. I think this means infer reads a partially-written models jar. We shouldn't try to load this in models mode.
- `install` would complain that the destination already exists. I think this can only happen if there's a race and the file gets created between when install first checks and when it tries to write to it.
This made me realise that the some of the models are computed in C and C++ mode
and we pick one computed spec arbitrarily. That sounds a bit dodgy but at least
now we do so in a non-racy way.
Reviewed By: jeremydubreil
Differential Revision: D5658389
fbshipit-source-id: 8077279
Summary: Also, stop trying to delete directories that do not exist: "sources" and "filelists".
Reviewed By: mbouaziz
Differential Revision: D5658089
fbshipit-source-id: e1cdb13
Summary:
This is a check for when an unavailable class is being allocated.
This diff also adds a check for the context to remove false positives: If the class is not available but the method calls are wrapped in a check whether the class is available, then don't report.
Reviewed By: jvillard
Differential Revision: D5631191
fbshipit-source-id: 2082dfe
Summary: Other parts of the code where using the checks in the AndroidFramework module. It is better to have those things in one place.
Reviewed By: sblackshear
Differential Revision: D5654247
fbshipit-source-id: 2a783e7
Summary:
Calling exit at the end of a proc does not create unreachable code, prior to this commit inferbo reports that it does.
We extend collect_instrs to detect when we're at the end of a procedure in C and not report on unreachable code if we call a procedure there.
Reviewed By: mbouaziz
Differential Revision: D5623637
fbshipit-source-id: 0d5f326
Summary:
For instance, `./build-infer.sh --opam-switch "4.04.2+spacetime"` now builds an
actual spacetime switch instead of a clone of the 4.04.2 switch called
"4.04.2+spacetime".
Reviewed By: jberdine
Differential Revision: D5631258
fbshipit-source-id: e6295c5
Summary: This check is not possible in Java as it natirally happens in the totally legit case of the `try ... finally`.
Reviewed By: sblackshear
Differential Revision: D5568802
fbshipit-source-id: 24ca074
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
Every module declared but not used in the same source file is warned about
currently. Disable the noisy warning.
For instance, before this diff (and after "M-x merlin-restar-process"):
1. open AbstractInterpreter.ml
2. merlin shows a warning for `module Make` inside emacs
Reviewed By: jberdine
Differential Revision: D5621383
fbshipit-source-id: c175e5d
Summary:
Seeing rrors in "/foo/bar/src/base/infer.ml" is less distracting than seeing
errors in "/foo/bar/src/./base/infer.ml".
Reviewed By: jberdine
Differential Revision: D5621060
fbshipit-source-id: 55ee069
Summary:
The issue was as follows:
- ppx.exe depended on all the ocaml source files
- ppx.exe is an implicit prerequisit of all the (non-automatically-generated) build objects in jbuilder
- as a result, when modifying a source file, we would recompile ppx.exe, thus all the source files
ppx.exe only needs to depend on all the generated source files, so that
jbuilder can find them all.
Reviewed By: jberdine
Differential Revision: D5621007
fbshipit-source-id: 92c5b9c
Summary:
The `-index-store-path` argument does not exist in Clang 5.0 and it gets discarded without any error message. The problem is that its argument, a folder, is not discarded, and Clang considers it as a source file. This leads to the following errors:
- `cannot specify -o when generating multiple output files` (this happens if a `-o` argument is passed)
- `error reading '<PATH>'` (this can be observed when running the "normalized" version of the clang command, generated via the -### flag)
This weird case can be observed when `-index-store-path` is passed in a sequence like the following: `-x c -index-store-path <PATH> -c`.
With this change, we remove the `index-store-path` option, and its argument, from the original clang command.
Reviewed By: jvillard
Differential Revision: D5601808
fbshipit-source-id: 4200308