Summary:
This diff adds a new experimental checker for detecting size of objects in autorelease pool in ObjC. The basic mechanism is almost the same with the previous cost calculation:
* Autorelease pool size is increased at explicit `autorelease` call
* Autorelease pool size is set as zero by the `autoreleasepool` block.
While it only supports the explicit calls as of now, we will extend the checker to handle more cases in the following diffs.
Reviewed By: ezgicicek
Differential Revision: D23473145
fbshipit-source-id: 416488176
Summary:
This diff extends the cost_item json format to print the autoreleasepool_size field. Not yet, there
is no semantics for that code kind, so the results will always be zero with no traces.
Reviewed By: ezgicicek
Differential Revision: D23540665
fbshipit-source-id: 94442e376
Summary:
Report errors found by running Topl on top of Pulse, when using
--topl-pulse. Topl tests now run on top of Pulse.
Reviewed By: jvillard
Differential Revision: D23030771
fbshipit-source-id: 8770c2902
Summary:
We need to check if `folly::Optional` is not `folly::none` if we want to retrieve the value, otherwise a runtime exception is thrown:
```
folly::Optional<int> foo{folly::none};
return foo.value(); // bad
```
```
folly::Optional<int> foo{folly::none};
if (foo) {
return foo.value(); // ok
}
```
This diff adds a new issue type that reports if we try to access `folly::Optional` value when it is known to be `folly::none`.
Reviewed By: ezgicicek
Differential Revision: D22053352
fbshipit-source-id: 32cb00a99
Summary: This linters were not used much anymore, so we can delete them.
Reviewed By: ngorogiannis
Differential Revision: D22233895
fbshipit-source-id: f31180a05
Summary: There is now a compilation check for UNAVAILABLE_API_IN_SUPPORTED_IOS_SDK so this check is less useful. Also the check REGISTERED_OBSERVER_BEING_DEALLOCATED is useful only in an old version of iOS.
Reviewed By: ngorogiannis
Differential Revision: D22231851
fbshipit-source-id: 72151fef5
Summary:
This diff adds a prototype of a new checker that collects config checkings between markers.
Basically, what the checker is doing is a taint analysis.
* Taint source: function calls of "marker start"
* Taint sink: function calls of config checking
* Taint remove: function calls of "marker end"
By the taint analysis, the analysis results will say that which taints can reach to the sink. In other words, which marker ID that has been started can reach to the config checks, before marker's ending.
I am separating the diff into three steps:
(1/3) Add basic abstract semantics
(2/3) Add trace information
(3/3) Add reporting with test examples
Reviewed By: jvillard
Differential Revision: D21998170
fbshipit-source-id: e7759f62f
Summary: Pulse has now a better version of this check, so let's delete it.
Reviewed By: ngorogiannis
Differential Revision: D22019247
fbshipit-source-id: 344678225
Summary:
This issue type was not giving good results and can be replaced by
Pulse's version.
Reviewed By: ngorogiannis
Differential Revision: D22019551
fbshipit-source-id: 5cf3db46d
Summary: The new memory leaks analysis is now ready to be enabled by default and turned on in production. This also replaces the biabduction one which is now disabled.
Reviewed By: jvillard
Differential Revision: D21998666
fbshipit-source-id: 9cd95e894
Summary:
Take all the issue type documentation in the website and add it to infer
itself so it can generate the website (see further diffs).
I mostly generated this diff by writing a script to call from `utop`
with various file lists to do most of the heavy lifting for me and make
sure I didn't forget any issue types: P132800781
Reviewed By: ngorogiannis
Differential Revision: D21934372
fbshipit-source-id: f3ea8c566
Summary:
We stopped relying on an arbitrary threshold. Hence,
- we don't need all the machinery for reporting at a specific node for a threshold
- we can remove
- the issue type `EXPENSIVE_EXECUTION_TIME`
- the config option `--use-cost-threshold`.
Reviewed By: skcho
Differential Revision: D21859815
fbshipit-source-id: b73a2372d
Summary:
In order to test cost analysis results, currently we rely on having an arbitrary cost threshold (200) and report issues that exceed this cost. For instance, a cost of 201 is considered expensive and reported as `EXPENSIVE_EXECUTION_TIME` issue in cost tests.
This means, if we change the cost analysis in a slight way that results in some constant cost increase under 200, we wouldn't able to detect it. I find this unsatisfactory and somewhat hacky.
This diff adds the ability to write the result of `costs-report.json` into a separate `cost-issues.exp` and then compare the actual costs (not only than relying on this arbitrary threshold reporting mechanism).
Reviewed By: skcho
Differential Revision: D21816312
fbshipit-source-id: 93b531928
Summary:
The option was misleading as it only concerns the biabduction analysis.
Moreover, this is a developer option, and one can already see it by
removing filtering altogether. I think this option was added as the
result of a user request, let's see if anyone notices.
Reviewed By: ezgicicek
Differential Revision: D21686526
fbshipit-source-id: ff383a0ca
Summary:
Don't assign different visibilities to the same issue type dynamically,
use different issue types with always static visibility instead. This is
to be able to document the visibility of each issue type.
Reviewed By: dulmarod
Differential Revision: D21686458
fbshipit-source-id: 876ab4157
Summary:
Introduce BIABD_ prefixes for a few issue types that were duplicated
between analyses, and also prefix the lab exercise issue type to avoid
sharing with biabduction.
Reviewed By: ngorogiannis
Differential Revision: D21660226
fbshipit-source-id: 3435916e6
Summary:
`ocamlc` didn't tell us but there are a bunch of dead exceptions in
`Exceptions.ml` that translate into dead issue types.
Found with:
```
for ex in $(grep -o -e '^exception [^ ]*' infer/src/IR/Exceptions.mli | cut -d ' ' -f 2); do git grep -q -e '\braise .*'$ex || git grep -q -e 'Exceptions\.'$ex || echo $ex; done
```
Reviewed By: skcho
Differential Revision: D21618645
fbshipit-source-id: f60a3f445
Summary:
We stopped relying on an external perf data file to determine which functions are on the cold start. Let's remove this issue now.
NB: Keeping the `--perf-profiler-data-file` as deprecated to prevent issues on the CI and prod.
Reviewed By: skcho
Differential Revision: D21594150
fbshipit-source-id: faa58782d
Summary:
In the previous diff we changed the semantics of nested classes w.r.t.
to Nullsafe.
Let's make it clear if users will attempt to misuse it.
Reviewed By: artempyanykh
Differential Revision: D21230717
fbshipit-source-id: 0ecc0dd06
Summary:
It is true that `Info` issues are normally not intended for the end user
and in general should be hidden by default.
However, the current behavior - show them only if `--no-filtering` is
true - is super non-intuitive and complicates already complex reporting
logic.
Lets use the general "enable/disable" mechanism for controlling this.
Reviewed By: jvillard
Differential Revision: D21154140
fbshipit-source-id: 69e4c88e4
Summary:
This information can be useful for tooling responsible for further
processing (e.g. metric calculation and logging)
Reviewed By: artempyanykh
Differential Revision: D20914583
fbshipit-source-id: 61804d88f
Summary:
Seems like a more sensible name. Most tooling should read report.json so
won't notice.
Still output a bugs.txt file with a message to point to report.txt while
people migrate.
Reviewed By: mityal, artempyanykh
Differential Revision: D20626111
fbshipit-source-id: efb84d098
Summary:
The documentation of `--quiet` dates back from when it applied only to
`InferPrint.ml`. Make it more general and more in line with
expectations one might have about a `--quiet` option:
- change the doc
- make it disable the progress bar
Reviewed By: ngorogiannis
Differential Revision: D20626110
fbshipit-source-id: db096fd31
Summary:
This is likely not the final refinement, rather one step forward.
We classify all classes by 3 categories:
- Nullsafe and 0 issues
- can add Nullsafe and will be 0 issues
- the rest (class needs improvement)
Each class will fall into exactly one category.
Error messaging is WIP, they are not intended to be surfaced to the user
just yet.
Note how this diff uses the result of the previous refactoring.
Reviewed By: artempyanykh
Differential Revision: D20512999
fbshipit-source-id: 7f462d29d
Summary:
First version of a new memory leak check based on Pulse. The idea is to examine unreachable cells in the heap and check that the "Allocated" attribute is available but the "Invalid CFree" isn't. This is done when we remove variables from the state.
Currently it only works for malloc, we can extend it to other allocation functions later.
Reviewed By: jvillard
Differential Revision: D20444097
fbshipit-source-id: 33b6b25a2
Summary:
This diff is doing three things:
1. Finishes work paved in D20115024, and applies it to nullsafe. In that diff, we hardened API for
file level analysis. Here we use this API in nullsafe, so now we can
analyze things on file-level, not only in proc-level like it was before!
2. Introduces a class-level analysis. For Nullsafe purposes, file is not
an interesting granularity, but we want to analyze a lot of things on
file level. Interesting part here is anonymous classes and how we link
them to their corresponding user-defined classes.
3. Introduces a first (yet to be improved) implementation of class-level
analysis. Namely it is "meta-issues" that tell what is going with class
on high level. For now these are two primitive issues, and we will
refine them in follow up diffs. They are disabled by default.
Follow ups include:
1. Refining semantics of meta-issues.
2. Adding other issues that we could not analyze before or analyzed not
user friendly. Most importantly, we will use it to improve reporting for
FIELD NOT INITIALIZED, which is not very user friendly exactly because
of lack of class-level aggregation.
Reviewed By: artempyanykh
Differential Revision: D20417841
fbshipit-source-id: 59ba7d2e3
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary:
Make <infer-out>/report.json the default value for this option, as this
is what is used 99% of the time. Clean up test options using this.
Reviewed By: ngorogiannis
Differential Revision: D20362644
fbshipit-source-id: a1bb18757
Summary:
InferPrint hasn't been in charge of writing bugs.txt since forever.
This will be re-implemented as a post-processing of report.json instead
(like it is now, but in OCaml instead of python).
Reviewed By: ngorogiannis
Differential Revision: D20362641
fbshipit-source-id: 83d8cb53d
Summary:
These were not used (and were actually activated byt the same config
param). They both are in experimental stage that never reached maturity.
Since the team does not have immediate plans to work on ObjC nullability
checker; and since "eradicate" (now known as nullsafe) is the main
solution for Java, removing it is sensible.
Reviewed By: jvillard
Differential Revision: D20279866
fbshipit-source-id: 79e64992b
Summary:
This diff renames `ZERO_XXX` issues to more appropriately named and descriptive
`XXX_UNREACHABLE_AT_EXIT` and replaces bottom with
unreachable in cost kinds and issues.
Reviewed By: skcho
Differential Revision: D20140301
fbshipit-source-id: eb6076b30
Summary:
Add support for nullsafe mode with `trust=all` and `trust=none` a case
with a specific trust list is not supported yet and needs to be
implemented separately.
Tests introduce one unexpected
`ERADICATE_INCONSISTENT_SUBCLASS_PARAMETER_ANNOTATION` issue which
complains about `this` having incorrect nullability; it is a bug and
needs to be fixed separately.
Reviewed By: mityal
Differential Revision: D19662708
fbshipit-source-id: 3bc1e3952
Summary: We don't use allocation costs in prod at the moment. There is no plan to do so in the near future. Let's not report them anymore and also save some space in `costs-report.json`.
Reviewed By: skcho
Differential Revision: D19766828
fbshipit-source-id: 06dffa61d
Summary:
This diff introduces two issue types: `BUFFER_OVERRUN_T1` and `INFERBO_ALLOC_IS_TAINTED`, which
denotes tainted values are used in array accesses and memory allocations, respectively.
Note that the taint analysis is intra-procedural for now.
Reviewed By: ezgicicek
Differential Revision: D19410536
fbshipit-source-id: af85148ec
Summary: This adds a check for when developers use weakSelf (and maybe strongSelf) in a block, when there is no need for it, because it won't cause a retain cycle. In general there is an annotation in Objective-C for methods that take blocks, NS_NOESCAPE, that means that the passed block won't leave the scope, i.e. is "no escaping". So we report when weakSelf is used and the block has the annotation.
Reviewed By: ngorogiannis
Differential Revision: D19662468
fbshipit-source-id: f5ac695aa
Summary:
Adding a new check as part of the SelfInBlock checker, for cases when a strong pointer to self, that is not self, is captured in the block.
This will cover the following wrong scenarios:
1. strongSelf is a local variable in a block as it should be, and then it's used in a sub-block, in which case it's a captured variable.
2. weakSelf is defined without the weak attribute by mistake.
Reviewed By: ngorogiannis
Differential Revision: D19538036
fbshipit-source-id: 151871745
Sungkeun Cho
Radu Grigore
Daiva Naudziuniene
Dulma Churchill
Jules Villard
Nikos Gorogiannis
Ezgi Çiçek
Mitya Lyubarskiy
Artem Pianykh