Summary:
Add test `incremental_analysis_remove_file` to the toplevel makefile so that it is called by `make test` etc
Also swapped the src_before and src_after files so the test checks file removal instead of addition.
Reviewed By: jvillard
Differential Revision: D16562340
fbshipit-source-id: 79bab5f66
Summary:
The default values of config options can sometimes depend on build-time
configuration values. This makes checking that the manuals "remain the same"
trickier as the manuals can be different depending on the platform. This
removes *all* default values from the checked-in manuals. We could be more
fine-grained and scrub only the values that are susceptible to change but for
now this is probably good enough.
This is done by implementing new options `--help-scrubbed` and
`--help-scrubbed-full` and using these in our tests instead of `--help` and
`--help-full` (which remain unaffected).
Also don't wrap the default values in `$(i,...)` anymore because the defaults
can trigger line breaks and then the man page is ill-formatted because that
format is stupid.
Reviewed By: mityal
Differential Revision: D16543779
fbshipit-source-id: bc929ff8c
Summary: This test wasn't building correctly or being called by the toplevel makefile
Reviewed By: jvillard
Differential Revision: D16458386
fbshipit-source-id: 48a0c2f36
Summary:
newer is better, right?
All the code changes in infer are because of core being bumped to v0.12.
Reviewed By: jberdine
Differential Revision: D16223183
fbshipit-source-id: f3c339966
Summary:
Replaced by pulse. `--ownership` is now a deprecated form of `--pulse`.
The ownership checker is starting to give wrong answers due to changes in the
clang frontend, so it's better to remove it in favour of pulse.
there_goes_my_hero
Reviewed By: ngorogiannis
Differential Revision: D16107650
fbshipit-source-id: bb2446a19
Summary:
This is a simple checker that identifies inefficient uses of `keySet` iterator where (not only the key but also) the value is accessed via `get(key)`. It is more efficient to use `entrySet` iterator which already returns both key-value pairs. This optimization would get rid of many extra lookups which can be expensive.
We simply traverse the CFG starting from the loop head upwards and pick up the map that is iterated over. Then, we check in the loop nodes if there is a call to `get(...)` over this map. If, so we report.
Reviewed By: ngorogiannis
Differential Revision: D15737779
fbshipit-source-id: 702465b4e
Summary:
That test wasn't hooked up to `make test` and so regressed at some
unknown time in the past. Just recording the new state of things for
now.
Reviewed By: ngorogiannis
Differential Revision: D15495234
fbshipit-source-id: 14fb112de
Summary:
TOPL properties are essentially automata, which specify a bad pattern.
This commit is just a parser for them.
Reviewed By: jvillard
Differential Revision: D14477671
fbshipit-source-id: c38a8ef37
Summary:
Figure out where libgmp and libmpfr are auto-magically by looking at where
`ldd` (or `otool` on osx) thinks they are.
This way we don't need to hardcode as much.
Reviewed By: ngorogiannis
Differential Revision: D14208580
fbshipit-source-id: 3b2dca5b2
Summary: Provide hooks into the autoconf configure script to define where libgmp and libmpfr may be found. Use these and opam to copy the more exotic library objects into the installation of infer on a new `make install-with-libs` target so that the binaries can be distributed usefully, i.e., without users having to install gmp, mpfr, and more importantly apron and elina (which need ocaml + opam + ..., which would defeat the point of having binaries).
Reviewed By: skcho
Differential Revision: D14065317
fbshipit-source-id: 9a2ac7200
Summary:
Building clang takes long and sometimes only some minor step in the setup
script has changed, triggering a spurious rebuild. Print a big bold message
letting the user know of their options, but only if clang has been installed
previously.
```
(warn_clang)jul@devvm2701:~/infer$ make -j 19
[04:02:44][2288770] Facebook setup...
*** Now building clang, this will take a while...
*** If you believe that facebook-clang-plugins/clang/install is up-to-date you can(TERM_RESET)
*** interrupt the compilation (Control-C) and run this to prevent clang from being rebuilt:
/home/jul/infer/facebook-clang-plugins/clang/setup.sh --only-record-install
(TIP: you can also force a clang rebuild by removing /home/jul/infer/facebook-clang-plugins/clang/installed.version)
[...]
```
Reviewed By: katiejots
Differential Revision: D13956431
fbshipit-source-id: da163643d
Summary:
`make clean` would fail calling `xcodebuild` to clean. It also calls `ant
clean`. Instead, do the cleaning ourselves by deleting the appropriate stuff so
that it's faster and more reliable.
Also clean the OCaml build before cleaning the tests as that's what more
important most of the time.
Also don't delete the man pages as part of `make clean` as they are checked in.
Also fix ant's Makefile so that the build points at the right .class files (the
path to the .class files was wrong so `make -C infer/tests/build_systems/ant`
would start `ant` for *each* file instead of once).
Reviewed By: martintrojer
Differential Revision: D13956218
fbshipit-source-id: bce27fe11
Summary: Publish solutions to the lab, and a Docker file and image to get started more quickly with infer hacking.
Reviewed By: mbouaziz
Differential Revision: D13648847
fbshipit-source-id: daf48ad03
Summary:
Switches from opam 1 to opam 2.
Opam2 has some cool new features that simplify some of the scripting.
Notable changes:
1. Use the new `opam lock` *plugin* from https://github.com/AltGr/opam-lock/ instead of https://github.com/rgrinberg/opam-lock. This has a simpler interface for our purposes.
2. Change the way `./build-infer.sh` can be called to use an already existing switch: simply pass `--user-opam-switch` to the script and it won't attempt to create/set the current switch. This can be used to build infer in a local switch for instance.
3. Take advantage of automatic pinning where possible, eg to install infer deps without using opam.locked.
Reviewed By: ngorogiannis
Differential Revision: D13167863
fbshipit-source-id: 1a667c270
Summary: Reports will now be issued for the class loads of the methods specified by the option `--class-loads-roots`.
Reviewed By: jvillard
Differential Revision: D10466492
fbshipit-source-id: 91456d723
Summary:
New analysis in foetal form to detect invalid use of C++ objects after their
lifetime has ended. For now it has:
- A domain consisting of a graph of abstract locations representing the heap, a map from program variables to abstract locations representing the stack, and a set of locations known to be invalid (their lifetime has ended)
- The heap graph is unfolded lazily when we resolve accesses to the heap down to an abstract location. When we traverse a memory location we check that it's not known to be invalid.
- A simple transfer function reads and updates the stack and heap in a rudimentary way for now
- C++ `delete` is modeled as adding the location that its argument resolves to to the set of invalid locations
- Also, the domain has a really crappy join and widening for now (see comments in the code)
With this we already pass most of the "use after delete" tests from the
Ownership checker. The ones we don't pass are only because we are missing
models.
Reviewed By: mbouaziz
Differential Revision: D10383249
fbshipit-source-id: f414664cb
Summary:
Fix the logic for computing duplicate symbols. It was broken at some point and some duplicate symbols creeped into our tests. Fix these, and add a test to avoid duplicate symbols detection to regress again.
Also, this removes one use of `Cfg.load`, on the way to removing file-wide CFGs from the database.
Reviewed By: ngorogiannis
Differential Revision: D10173349
fbshipit-source-id: a0d2365b3
Summary:
Also changes `clang_plugin_test` so that it also runs the clang-ocaml tests, and add a new `clang_plugin_test_replace` target.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jberdine
Differential Revision: D10141902
fbshipit-source-id: 927c55a4f
Summary:
The method matcher is now used sufficiently it warrants refactoring out into its own module.
Also, kill dev-android-strict-mode and leave starvation-strict-mode as the stronger option.
Reviewed By: jeremydubreil
Differential Revision: D9990753
fbshipit-source-id: 626a70a19
Summary:
This allows infer devs to see the effects their changes have on the infer manuals.
Check in the manuals for each subcommand + the output of `--help-full` to get a
complete picture. If this is too annoying we can also check in only
`--help-full`.
Reviewed By: mbouaziz
Differential Revision: D9916404
fbshipit-source-id: b981e2c33
Summary:
Turn off by default until mature enough.
Also rename the dev-strict-mode test dir to highlight the dev part.
Reviewed By: mbouaziz
Differential Revision: D9775571
fbshipit-source-id: c3a41bbdf
Summary:
First step in writing an analyzer that is meant to run only on Android core library implementation.
This will, when finished, compute the library entrypoints that may lead to a strict mode violation.
The normal analyzer will use those to statically flag strict mode violations in app code.
Strict Mode is an Android debug mode, where doing certain things (like disk read/write or network activity) on the UI thread will raise an exception. We want to statically catch these, as well as indirect versions (the UI thread takes a lock and another thread holding that lock calls a method that would be a strict mode violation).
Reviewed By: mbouaziz
Differential Revision: D9634407
fbshipit-source-id: c30bcedb3
Summary:
Some paths are hardcoded in infer as being relative to the current executable,
for instance the directory where to find the models. By copying infertop.bc to
infer/bin like we do for `infer` these relative paths lead to the expected
place, which means models can be loaded in the toplevel like they would be in a
normal infer execution. This is more useful for debugging than previously.
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D9197142
fbshipit-source-id: 48c4f82fb
Summary:
This makes sure that the javac_jar is disabled when setting the external compiler option to point at the Infer wrapper
Closes#976
Reviewed By: jvillard
Differential Revision: D9193336
fbshipit-source-id: abafb51fc
Summary:
See the results online!
http://fbinfer.com/docs/man-pages.htmlhttp://fbinfer.com/docs/internal-API.html
These html pages are written by hand, but their target is auto-generated.
I cheated a bit by generating the docs for the current version of infer and not
0.15.0 but they are hopefully very similar.
Depends on D8314572
Reviewed By: jeremydubreil
Differential Revision: D8318132
fbshipit-source-id: ffca43c
Summary:
`make doc` will use `jbuilder` (which in turn uses `odoc`) to generate the
documentation for infer's modules. This is useful to browse the APIs of infer
and gives a more discoverable place to host more general documentation about
infer's internals.
Besides the actual plumbing necessary to generate the docs, this diff also
- Moves the various infer/src/*/README.md to index.mld files that make it to the generated docs
- Fixes some doc comments that would anger `ocamldoc`
Closes#435
Reviewed By: mbouaziz
Differential Revision: D8314572
fbshipit-source-id: 4a5c70e
Summary: The clang distribution uses symlinks in some places, which avoids copying rather large binaries. `make install` was replacing these with actual copies. Try not to be so wasteful anymore.
Reviewed By: mbouaziz
Differential Revision: D8260777
fbshipit-source-id: eccabab
Summary:
Change the documentation to refer to (upcoming) binary releases. Update the
scripts to treat .release differently: now we want to build clang and the
plugins even in release mode, as that's just the preparation for the release
tarball containing only binaries.
Reviewed By: mbouaziz
Differential Revision: D8235388
fbshipit-source-id: bfb4ae8
Summary:
New script to create binary releases instead of just packaging clang + facebook clang plugins.
Basically calls `make install` into a directory and tars it.
Reviewed By: mbouaziz
Differential Revision: D8204034
fbshipit-source-id: b664129
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary: Set arguments of pointer type as initialised for indirect function calls.
Reviewed By: mbouaziz
Differential Revision: D8097895
fbshipit-source-id: 830f568
Summary: Follow C++ in having local variables owned plus silence reports on paths rooted on logical vars. We need both because when propagating ownership from right to left, the initial status of a temp var as owned is lost.
Reviewed By: sblackshear
Differential Revision: D7988575
fbshipit-source-id: 2e817d7
Summary: I needed it for debugging but, to my dismay, it was borked again. This time it was because `jbuilder` moved the object files to another directory since the last jbuilder update.
Reviewed By: mbouaziz
Differential Revision: D7926267
fbshipit-source-id: 42ad26a
Summary:
`brew install opam` is unhappy and wants us to run `brew unlink python`
beforehand so do that.
The `make install` logic in infer had a problem of nested `if` logic.
Reviewed By: da319
Differential Revision: D7686760
fbshipit-source-id: dd0c988
Summary:
Upgrade ocamlformat, and base which needs to be done in sync in order to build
ocamlformat, and the other deps can come for the ride.
Reviewed By: jvillard
Differential Revision: D7663537
fbshipit-source-id: 3e90970
Summary:
This was meant to be part of D7569054 but the wrong version landed.
classicblunder
Reviewed By: mbouaziz
Differential Revision: D7615865
fbshipit-source-id: a29b3af
Summary:
Making the shell stricter revealed a bug in `make devsetup`:
`shell_config_file` can be used without being initialised. Also, the error path
when testing if `BUILD_MODE` was set to default was wrong and would execute all
except the first `echo` command unconditionally. I changed the test so that it
tests only if `BUILD_MODE` is set in the environment.
Reviewed By: martinoluca
Differential Revision: D7615333
fbshipit-source-id: 08c5eb0
Summary:
Lost in D7569054: because `-e` is set, the command to run needs to be wrapped a
bit more carefully to continue the execution in case of failure and get to the
part where we print the error messages on the console.
Reviewed By: mbouaziz
Differential Revision: D7599442
fbshipit-source-id: 65f6bf7
Summary:
Run with `SHELL = bash -e -u -o pipefail` to catch many kinds of failures. We
were silently failing during `make install` because of some missing escaping,
and the failure was hidden because it was happening inside a bash `for` loop.
This fixes the escaping issue and makes sure such issues will result in an
error as of now.
Also removes dangerous `find -exec` instances: `find` will `exit 0` event if
some commands failed.
Fixes#887
Reviewed By: mbouaziz
Differential Revision: D7569054
fbshipit-source-id: 542fe50
Summary:
The dead code checker slows down the test suite notably, and can be annoying
when you're in the middle of a change.
Depends on D7443825
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D7443881
fbshipit-source-id: 746cf6e
Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Phoebe Nichols
Jules Villard
Martin Trojer
Josh Berdine
Ezgi Çiçek
Nikos Gorogiannis
Radu Grigore
Dino Distefano
Nikos Gorogiannis
Sungkeun Cho
Mehdi Bouaziz
Julian Sutherland
Martino Luca
Jeremy Dubreil
Daiva Naudziuniene
Sam Blackshear