Summary: Specialise the above option to `true` and remove resulting dead code.
Reviewed By: dulmarod
Differential Revision: D21177041
fbshipit-source-id: 4a1c65850
Summary: This option makes RacerD angelic wrt the ownership of returned objects from procedures without summary. This will now be made the default and the option deprecated up the diff stack.
Reviewed By: dulmarod
Differential Revision: D21174676
fbshipit-source-id: 9c48d3d7d
Summary:
It is true that `Info` issues are normally not intended for the end user
and in general should be hidden by default.
However, the current behavior - show them only if `--no-filtering` is
true - is super non-intuitive and complicates already complex reporting
logic.
Lets use the general "enable/disable" mechanism for controlling this.
Reviewed By: jvillard
Differential Revision: D21154140
fbshipit-source-id: 69e4c88e4
Summary: The flags `--biabduction-fallback-model-alloc-pattern` and `--biabduction-fallback-model-free-pattern` were unused because we removed the models from .inferconfig a while ago because of too many false positives. We are implementing a better memory leak check based on Pulse, and are adding the similar flags `--pulse-model-alloc-pattern` and `--pulse-model-free-pattern`.
Reviewed By: jvillard
Differential Revision: D21061511
fbshipit-source-id: 1b3476c22
Summary:
This is another entry in infer-out/, we want these to be predictable,
not user-defined.
Reviewed By: dulmarod
Differential Revision: D20894302
fbshipit-source-id: ee60ddbcf
Summary:
This is an entry in infer-out/, we want these to be predictable, not
user-defined.
Reviewed By: ngorogiannis
Differential Revision: D20894307
fbshipit-source-id: 332f85969
Summary:
This option allowed one to customise the name of the log file, but the
log file lives in infer-out/ so that flexibility is not needed and even
undesirable: we want entries in infer-out/ to be predictable.
Reviewed By: skcho
Differential Revision: D20894304
fbshipit-source-id: 760d91df3
Summary:
This information can be useful for tooling responsible for further
processing (e.g. metric calculation and logging)
Reviewed By: artempyanykh
Differential Revision: D20914583
fbshipit-source-id: 61804d88f
Summary:
This diff limits the depth of abstract location by a constant.
problem: Inferbo generated too many of abstract locations, especially when struct types had many pointer fields and Inferbo was not able to analyze the objects precisely. Since the number of generated abstract locations were exponential to the number of fields, it resulted in OOM in the end.
(reported by zyh1121 in https://github.com/facebook/infer/issues/1246)
Reviewed By: jvillard
Differential Revision: D20818471
fbshipit-source-id: f8af27e5c
Summary:
It's easy to create large arrays in code, eg `int x[1UL << 16];`, but
these can generate huge nodes in SIL because zero-initialization is
translated by zero-ing structures element by element. Introduce a
builtin to use instead. Keep the naive method for small structures (with
a configurable limit on "small").
Reviewed By: dulmarod
Differential Revision: D20836836
fbshipit-source-id: 6bf5410f8
Summary:
Re-implement the generation of an HTML report (with bug traces) in
OCaml.
Kills the --only-show as a side-effect, it is of dubious use since there
is already infer-out/report.txt to get the report list as text. A
follow-up diff adds numbers to the list in infer-out/report.txt for easy
cross-referencing with `infer explore --select 123`.
Reviewed By: skcho
Differential Revision: D20672769
fbshipit-source-id: 39b3a299d
Summary:
Hopefully no one uses this. This is in Python and we'd like to get rid
of it. Easy enough to either re-implement if needed or to be
re-implemented by a third party.
Reviewed By: ngorogiannis
Differential Revision: D20626344
fbshipit-source-id: 484022482
Summary:
Seems like a more sensible name. Most tooling should read report.json so
won't notice.
Still output a bugs.txt file with a message to point to report.txt while
people migrate.
Reviewed By: mityal, artempyanykh
Differential Revision: D20626111
fbshipit-source-id: efb84d098
Summary:
The documentation of `--quiet` dates back from when it applied only to
`InferPrint.ml`. Make it more general and more in line with
expectations one might have about a `--quiet` option:
- change the doc
- make it disable the progress bar
Reviewed By: ngorogiannis
Differential Revision: D20626110
fbshipit-source-id: db096fd31
Summary: Use the an LRUCache in Ondemand.LocalCache to avoid clearing it after every toplevel analysis.
Reviewed By: ngorogiannis
Differential Revision: D20281932
fbshipit-source-id: 752c8e1ea
Summary:
This is likely not the final refinement, rather one step forward.
We classify all classes by 3 categories:
- Nullsafe and 0 issues
- can add Nullsafe and will be 0 issues
- the rest (class needs improvement)
Each class will fall into exactly one category.
Error messaging is WIP, they are not intended to be surfaced to the user
just yet.
Note how this diff uses the result of the previous refactoring.
Reviewed By: artempyanykh
Differential Revision: D20512999
fbshipit-source-id: 7f462d29d
Summary: Add a flag `is-inclusive-cost` (`true` by default) which computes inclusive cost for each function. Setting the flag to `false` computes exclusive cost of the function where the cost of the callees are assumed to be `0`.
Reviewed By: skcho
Differential Revision: D20558275
fbshipit-source-id: 6b5798916
Summary:
First version of a new memory leak check based on Pulse. The idea is to examine unreachable cells in the heap and check that the "Allocated" attribute is available but the "Invalid CFree" isn't. This is done when we remove variables from the state.
Currently it only works for malloc, we can extend it to other allocation functions later.
Reviewed By: jvillard
Differential Revision: D20444097
fbshipit-source-id: 33b6b25a2
Summary:
This diff is doing three things:
1. Finishes work paved in D20115024, and applies it to nullsafe. In that diff, we hardened API for
file level analysis. Here we use this API in nullsafe, so now we can
analyze things on file-level, not only in proc-level like it was before!
2. Introduces a class-level analysis. For Nullsafe purposes, file is not
an interesting granularity, but we want to analyze a lot of things on
file level. Interesting part here is anonymous classes and how we link
them to their corresponding user-defined classes.
3. Introduces a first (yet to be improved) implementation of class-level
analysis. Namely it is "meta-issues" that tell what is going with class
on high level. For now these are two primitive issues, and we will
refine them in follow up diffs. They are disabled by default.
Follow ups include:
1. Refining semantics of meta-issues.
2. Adding other issues that we could not analyze before or analyzed not
user friendly. Most importantly, we will use it to improve reporting for
FIELD NOT INITIALIZED, which is not very user friendly exactly because
of lack of class-level aggregation.
Reviewed By: artempyanykh
Differential Revision: D20417841
fbshipit-source-id: 59ba7d2e3
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary:
Make <infer-out>/report.json the default value for this option, as this
is what is used 99% of the time. Clean up test options using this.
Reviewed By: ngorogiannis
Differential Revision: D20362644
fbshipit-source-id: a1bb18757
Summary:
InferPrint hasn't been in charge of writing bugs.txt since forever.
This will be re-implemented as a post-processing of report.json instead
(like it is now, but in OCaml instead of python).
Reviewed By: ngorogiannis
Differential Revision: D20362641
fbshipit-source-id: 83d8cb53d
Summary:
I don't think anyone uses this. Meta-goal: cleaning up InferPrint.ml.
Measuring stats about summaries is good in principle, but we should do
it somewhere else instead of in the InferPrint callback hell. For
instance when we record each summary. Meanwhile, delete this.
Reviewed By: ngorogiannis
Differential Revision: D20362639
fbshipit-source-id: c73d431a5
Summary:
Warning: This might be a bit brutal.
PerfStats and EventLogger are pretty much subsumed by `ScubaLogging`.
It seems no one has been looking at the data they generate recently.
Let's delete them! If we need to re-implement some parts later on, let's
do that using `ScubaLogging`, which is better (eg, still produces data
when infer crashes).
Things we lose:
- errors in the clang frontend due to missing decl translation, etc.
- errors in biabduction due to timeouts, functions not found, etc.
We could also re-implement these using BackendStats and ScubaLogging
instead of brutally deleting everything.
Reviewed By: ngorogiannis
Differential Revision: D20343087
fbshipit-source-id: 90a3121ca
Summary:
The goals are to have all the checker definitions and documentation in one
place (except how to actually run them, since that's not quite the same
concept; for example inferbo is one checker but several analyses depend on its
symbolic execution), and later on to be able to link issues reported by infer
back to the checker that generated them.
This makes apparent that the documentation of our checkers is lacking,
not touching that in this diff.
Not sure if "analysis" would be a better name than "checker" at this
point? For instance "Linters" is one of the checkers, which historically
at least we have not considered to be the case.
Reviewed By: mityal
Differential Revision: D20252386
fbshipit-source-id: fc611bfb7
Summary:
Problem: `infer report <specs file name>` is called manually sometimes to see analysis results in CLI. However, giving the specs file name is sometimes annoying, because the specs file name may be quite long and include special characters sometimes.
This diff introduces `--procedures-summary` to lookup the summaries interactively in `infer explore`.
example1: There are 8 procedures that include "max" in their names, then I selected one of them by entering a number.
```
$ infer explore --procedures --procedures-filter '.*max.*' --procedures-summary
0: minmax_div_const2_Bad_FN
1: minmax_div_const_Good
2: use_int64_max_Bad
3: use_uint64_max_Good
4: use_int64_max_Good
5: minmax_div_const_Bad
6: minmax_div_const2_Good
7: use_uint64_max_Bad
Select one number (type 'a' for selecting all, 'q' for quit): 2
void use_int64_max_Bad()
Analyzed
ERRORS: BUFFER_OVERRUN_L1
WARNINGS:
FAILURE:NONE SYMOPS:0
BufferOverrunAnalysis: StackLocs: { } MemPure: { } Alias: { ret= }
BufferOverrunChecker: Safety conditions:
{ }
```
example2: If there is only one specs file that satisfies the given filter, it reports the summary of that procedure without an interaction.
```
$ infer explore --procedures --procedures-filter '.*add_in_loop_ok.*' --procedures-summary
Selected proc name: void ArrayListTest.add_in_loop_ok()
void void ArrayListTest.add_in_loop_ok()(ArrayListTest* this)
Analyzed
ERRORS:
WARNINGS:
FAILURE:NONE SYMOPS:0
BufferOverrunAnalysis: StackLocs: { } MemPure: { } Alias:
{ i=size(__new-390022197-0-1.elements), ret= }
LatestPrune: latest { i -> (5, { }, { }) by ((5, { }, { }) >= (5, { }, { })),
__new-390022197-0-1.elements -> (⊥, { }, { __new-390022197-1-1 -> length : 5 }) by ((5, { }, { }) >= (5, { }, { })) }
BufferOverrunChecker: Safety conditions:
{ }
```
Reviewed By: jvillard
Differential Revision: D20284052
fbshipit-source-id: 2131339f1
Summary: Add the possibility of passing Scuba tagsets through the command line arguments.
Reviewed By: ngorogiannis
Differential Revision: D20262807
fbshipit-source-id: 9134cce8f
Summary:
It's a lot of code to maintain for something that no one ever uses
anymore.
Reviewed By: ngorogiannis
Differential Revision: D20282794
fbshipit-source-id: 28422c415
Summary:
These were not used (and were actually activated byt the same config
param). They both are in experimental stage that never reached maturity.
Since the team does not have immediate plans to work on ObjC nullability
checker; and since "eradicate" (now known as nullsafe) is the main
solution for Java, removing it is sensible.
Reviewed By: jvillard
Differential Revision: D20279866
fbshipit-source-id: 79e64992b
Summary:
This diff renames `ZERO_XXX` issues to more appropriately named and descriptive
`XXX_UNREACHABLE_AT_EXIT` and replaces bottom with
unreachable in cost kinds and issues.
Reviewed By: skcho
Differential Revision: D20140301
fbshipit-source-id: eb6076b30
Summary:
The `--continue-analysis` option enables continuing analysis after more targets are captured by
`--continue`. For example,
```
$ infer capture -- buck build tgt1
$ infer analyze --merge
$ infer capture --continue -- bucck build tgt2
$ infer analyze --merge --continue-analyze
```
In the last analysis, it reuses the analysis results of `tgt1` from the previous analysis. If
`tgt1` and `tgt2` have a same dependency to a library, the analysis results of the library is also
reused.
Reviewed By: dulmarod
Differential Revision: D19996598
fbshipit-source-id: bb6874a6f
Summary:
Add support for nullsafe mode with `trust=all` and `trust=none` a case
with a specific trust list is not supported yet and needs to be
implemented separately.
Tests introduce one unexpected
`ERADICATE_INCONSISTENT_SUBCLASS_PARAMETER_ANNOTATION` issue which
complains about `this` having incorrect nullability; it is a bug and
needs to be fixed separately.
Reviewed By: mityal
Differential Revision: D19662708
fbshipit-source-id: 3bc1e3952
Summary: We don't use allocation costs in prod at the moment. There is no plan to do so in the near future. Let's not report them anymore and also save some space in `costs-report.json`.
Reviewed By: skcho
Differential Revision: D19766828
fbshipit-source-id: 06dffa61d
Summary:
This diff introduces two issue types: `BUFFER_OVERRUN_T1` and `INFERBO_ALLOC_IS_TAINTED`, which
denotes tainted values are used in array accesses and memory allocations, respectively.
Note that the taint analysis is intra-procedural for now.
Reviewed By: ezgicicek
Differential Revision: D19410536
fbshipit-source-id: af85148ec
Summary:
This diff adds a taint domain in Inferbo. The taint value will be used to find vulnerable array
accesses in the following diffs.
Reviewed By: ezgicicek
Differential Revision: D19391028
fbshipit-source-id: 566b4c0fe
Summary: This adds a check for when developers use weakSelf (and maybe strongSelf) in a block, when there is no need for it, because it won't cause a retain cycle. In general there is an annotation in Objective-C for methods that take blocks, NS_NOESCAPE, that means that the passed block won't leave the scope, i.e. is "no escaping". So we report when weakSelf is used and the block has the annotation.
Reviewed By: ngorogiannis
Differential Revision: D19662468
fbshipit-source-id: f5ac695aa
Summary:
Adding a new check as part of the SelfInBlock checker, for cases when a strong pointer to self, that is not self, is captured in the block.
This will cover the following wrong scenarios:
1. strongSelf is a local variable in a block as it should be, and then it's used in a sub-block, in which case it's a captured variable.
2. weakSelf is defined without the weak attribute by mistake.
Reviewed By: ngorogiannis
Differential Revision: D19538036
fbshipit-source-id: 151871745
Summary:
Now we can either disable it, or enable it only.
For integrations that disable it, this will allow to enable it for
NullsafeStrict classes without enabled it fully
Reviewed By: artempyanykh
Differential Revision: D19409131
fbshipit-source-id: a2b1fe650
Summary:
That was used only by the now-defunct Java Buck integration without
genrules.
Reviewed By: ngorogiannis
Differential Revision: D19176545
fbshipit-source-id: 8253b614a
Summary:
You should use `--buck-java` instead, which uses the new "genrule
master" integration.
This diff makes it impossible to select the previous integration.
Upcoming diffs will clean up the resulting dead code.
This also make infer fail hard when no buck mode is specified in a buck
capture command, eg `infer -- buck build //foo:foo`. The reason is that
we need to choose between 3 incompatible integrations and making any of
them the default will confuse at least one person in the future.
Reviewed By: ngorogiannis
Differential Revision: D19176391
fbshipit-source-id: 707d18b50
Summary:
These changes introduce the RestartScheduler which for now is a copy of the FileScheduler:
- added it as a possible argument to the recently added `--scheduler` option.
- made the necessary changes in `InferAnalyze` to call it if it was chosen.
Reviewed By: ngorogiannis
Differential Revision: D19373505
fbshipit-source-id: 98f065057
Summary: Add command line option that directs racerd to treat all return values from unknown code (including abstract methods) as owned objects. This is essentially treating return values with full angelicism
Reviewed By: artempyanykh
Differential Revision: D19368375
fbshipit-source-id: 6a10153fa
Summary:
This changes how we select amongst our (currently) 4 Buck integrations
for Java and clang, as well as how the user's choice is reflected by the
Config module.
The old command line interface is still supported but is now deprecated.
The changes in how to select each integration are:
- clang via "flavors", activated with `--flavors`, now with `--buck-clang`
- clang via "compilation DB", activated with `--buck-compilation-database`, unchanged
- Java via "genrule", activated with `--genrule-master-mode`, now with `--buck-java`
- Java "without genrules", used to be activated by *not specifying any other Buck mode*, unchanged
Instead of various `Config` flags corresponding to the previous CLI that
are allowed in any combination of `flavors`,
`buck_compilation_database`, `genrule_master_mode`, `Config` now exposes
a single `buck_mode` datatype. This allows, eg, `flavors` to override
`buck_compilation_database` if needed. It will also make it easier to
get rid of the old "Java without genrules" integration in a later diff
(see inline comments).
Reviewed By: ngorogiannis
Differential Revision: D19175686
fbshipit-source-id: 29b3831be
Summary:
The re-execution phase uses only the preconditions found by the footprint phase. Thus, Infer should
not spend time optimizing POSTconditions. These are used only to find custom errors.
Reviewed By: jvillard
Differential Revision: D19035495
fbshipit-source-id: d52b82733
Summary:
Inferbo does not use the external relational domains, apron and elina. At some point, the parts of
inferbo using them were broken and they do not seem to be fixed easily in the near future. Let's
remove them and keep the code base cleaner.
Reviewed By: jvillard
Differential Revision: D19022905
fbshipit-source-id: e0eafe79f
Summary: The new domain is much better than the old one. Let's kill the old one (along with old litho tests) and simplify things.
Reviewed By: skcho
Differential Revision: D18959627
fbshipit-source-id: df77ae20e
Summary: It is not used anywhere and there are no plans to revive it. Kill it!
Reviewed By: skcho
Differential Revision: D18934719
fbshipit-source-id: b9b069b96
Summary: This diff checks litho condition on the new abstract value. This is triggered with `--new-litho-domain`, but it is intra-procedural as of now.
Reviewed By: ezgicicek
Differential Revision: D18783203
fbshipit-source-id: 98570104e
Summary: Raises an error when weakSelf is used multiple times in a block. The issue is that there could be unexpected behaviour. Even if `weakSelf` is not nil in the first use, it could be nil in the following uses since the object that `weakSelf` points to could be freed anytime.
Reviewed By: skcho
Differential Revision: D18765493
fbshipit-source-id: 37fc652e3
Summary:
We were wrongly not supressing third-party calls in
case third party repo is provided: there was a bug in the function is_modelled_externally.
because of this we accidentally stopped supressing third party and
started to advertise it in non-strict mode.
we do plan doing that, but little bit further ahead :)
So let's add a param guiding this.
Reviewed By: artempyanykh
Differential Revision: D18658271
fbshipit-source-id: 703f2675b
Summary:
Now we point to the root cause of the problem, and also provide
actionable way to solve the issue
Reviewed By: artempyanykh
Differential Revision: D18575650
fbshipit-source-id: ba4884fe1
Summary:
First step towards a global analysis. A new command line flag activates the step in `Driver`.
The whole-program analysis is a simple, quadratic (inefficient-as-yet), iteration over all domain elements. However, it is restricted to those elements that are explicitly scheduled to run.
Reviewed By: skcho
Differential Revision: D17787441
fbshipit-source-id: 9fecd766c
Summary:
Note: Disabled by default.
Having some support for values, we can report when a null or constant
value is being dereferenced. The particularity here is that we don't
report when 0 is a possible value for the address, or even if we know
that the value of the address can only be 0 in that branch! Instead, we
allow ourselves to report only when we the address has been *set* to
NULL (or any constant).
This is in line with how pulse deals with other issues: only report when
1. we see an address become invalid, and
2. we see the same address be used later on
Reviewed By: skcho
Differential Revision: D17665468
fbshipit-source-id: f1ccf94cf
Summary:
The variable strongSelf, because it is equal to a weak captured pointer, needs to be checked for null before being used, otherwise it could be null by the time the block is executed.
Added this check to the SelfInBlock checker, and removed it from biabduction.
We want to migrate all the objc checks from biabduction, so it will be easier to change and faster and more reliable. Moreover, this check is more general, it will flag any use of unchecked strongSelf, not just a dereference.
Reviewed By: skcho
Differential Revision: D18403849
fbshipit-source-id: a9cf5d80b
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Summary:
Ability to accept relative path is convenient for testing and local
debugging.
Ability to accept absolute paths is needed for buck integration - buck
knows absolute path (to properly invalidate cache when the content of
the folder is changed) and passes it to infer.
Reviewed By: artempyanykh
Differential Revision: D18370407
fbshipit-source-id: be7f12ae1
Summary:
In this diff, we just load the info from the storage. Next diff will be
actually using this information to infer nullability.
`ThirdPartyAnnotationGlobalRepo.get_repo` will be used in the next diff,
hence #skipdeadcode
Reviewed By: artempyanykh
Differential Revision: D18347647
fbshipit-source-id: 82a9223c6
Summary: We only care about expensive invariant calls. Let's disable the usual one since it is not used and there is no point filling up our dbs.
Reviewed By: dulmarod
Differential Revision: D18298530
fbshipit-source-id: 7a933c8da
Summary:
Describe what the --report-*-* options actually do instead of their
outdated documentation from the time where this was
`--checkers-blacklist-regex`, `--infer-blacklist-regex` and the like.
Reviewed By: dulmarod, mityal
Differential Revision: D17906015
fbshipit-source-id: 204349e9e
Summary: Not used feature and with no obvious roadmap anymore.
Reviewed By: jberdine, jvillard
Differential Revision: D17855860
fbshipit-source-id: fd75b9d62
Summary: `litho` checker contained two checkers: required-props and graphQL field accesses. Although they use the same domain, their reporting conditions and analysis details are different. However, they were bundled into the same analysis by adding disjunctions to `exec_instr` to handle both cases. Let's separate them into two different checkers, keeping a modular transfer function and analyzer that is reused by these two checkers.
Reviewed By: skcho
Differential Revision: D17788834
fbshipit-source-id: 47d77063b
Summary:
The documentation and uses of filtering disagree. One typical usage is deduplication.
Split that where obvious, add comments where not obvious, and leave alone when obviously unrelated to deduplication.
Reviewed By: mityal
Differential Revision: D17715329
fbshipit-source-id: ec757927b
Summary:
Introduce a new experimental checker (`--impurity`) that detects
impurity information, tracking which parameters and global variables
of a function are modified. The checker relies on Pulse to detect how
the state changes: it traverses the pre and post pairs starting from
the parameter/global variable and finds where the pre and post heaps
diverge. At diversion points, we expect to see WrittenTo/Invalid attributes
containing a trace of how the address was modified. We use these to
construct the trace of impurity.
This checker is a complement to the purity checker that exists mainly
for Java (and used for cost and loop-hoisting analyses). The aim of
this new experimental checker is to rely on Pulse's precise
memory treatment and come up with a more precise im(purity)
analysis. To distinguish the two checkers, we introduce a new issue
type `IMPURE_FUNCTION` that reports when a function is impure, rather
than when it is pure (as in the purity checker).
TODO:
- improve the analysis to rely on impurity information of external
library calls. Currently, all library calls are assumed to be nops,
hence pure.
- de-entangle Pulse reporting from analysis.
Reviewed By: skcho
Differential Revision: D17051567
fbshipit-source-id: 5e10afb4f
Summary: We should be able to run this processing ast steps without running linters or capture. This also adds a new module ProcessAST to do the processing, Capture.ml should not know anything else than calling the respective modules for capture, linting or processing.
Reviewed By: ngorogiannis
Differential Revision: D17501453
fbshipit-source-id: 30adba5b1
Summary:
Sqlite versions set their own default page and cache size. Old versions use crazy-non-optimal settings.
Allow setting both from command line and set up reasonable defaults. See, e.g.,
https://wiki.mozilla.org/Performance/Avoid_SQLite_In_Your_Next_Firefox_Feature
for page size notes.
The defaults will cost a maximum of 64Mb in cache per Infer process. These improve merging times significantly.
Reviewed By: jvillard
Differential Revision: D17364643
fbshipit-source-id: b9abab10f
Summary:
This check was an incomplete attempt to make nullsafe check nutritious
annotations for fields that get modified.
This was never fully productionized, and this check is turned off by
default.
In near future, we don't anticipate supporting this feature, so let's
remove it to simplify the code.
Reviewed By: artempyanykh
Differential Revision: D17282015
fbshipit-source-id: d63a2f1f7
Summary: Use_after_free was used both for biabduction and pulse, and the biabduction version is blacklisted by default. As a result, the Pulse version was also disabled unintentionally. This changes the name of the old use_after_free so that now we can get use_after_free bugs whenever pulse is enabled.
Reviewed By: skcho
Differential Revision: D17182687
fbshipit-source-id: 539ca69de
Summary:
`Present` annotation was an experiment made many years ago that never
got into real usage. The idea was to annotate Optional<> types with
Present, which means that it is safe to call get().
We don't plan to support `Present` annotation for optional types in the
near future.
Support of `Present` annotation requires extra levels of abstraction
that make the changing the behavior and introducing new features harder.
A lot of checks for nullability are written in generic way so they also
check for presense.
Getting rid of that will allow us to simplify our
work for introducing new semantics for nullsafe.
Reviewed By: ngorogiannis
Differential Revision: D17153432
fbshipit-source-id: c5ea9bdf1
Summary:
Implementation of write-serializer for Sqlite. Points of note:
- A Unix socket is used for communication. This avoids buffer-size limitations, as the objects we send for writing may exceed said limits.
- No daemon is used if running under buck or in genrule mode, as this usually means a single-threaded job capturing into the DB.
- When the daemon is running, read-only access is *not* enforced for other processes. This makes starting and stopping the daemon during Infer execution easier and more robust. In WAL mode this should not have any effect on performance.
- This version is not economical with connections, it uses one per query, todo.
Reviewed By: jvillard
Differential Revision: D17077183
fbshipit-source-id: fa9877d6c
Summary:
I found it very confusing that running infer with --debug makes the
report to be different.
Intuitively, I expect (and I think majority of users would expect) that
`--debug` makes things more verbose (and potentially more slow / consuming
more memory and disk space), but does not change anything apart from it.
One pro of preserving existing behavior, pointed by jvillard:
- Suppose some check is experimental or disabled in the config. The
users expect the issue to be found, but it does not show up. They run
`infer --debug` to understand the behavior, and suddenly the issue shows
up.
I, hovewer, find this pro not important enough and potentially confusing
the users even more.
(If they want to investigate seriously, they can always use
--no-filtering, and there are a lot of cases when the issue does not
show up for others, much hard to undertand reasons, than the fact that
it is disabled).
Reviewed By: jvillard
Differential Revision: D17113750
fbshipit-source-id: 46cc93503
Summary:
This is more powerful than `"symbols"` for more advanced use-cases. Keep
`"symbols"` unchanged to make migrating easier.
Differential Revision: D16985756
fbshipit-source-id: dfbb09393
Summary:
The models are only for biabduction so try to make that clearer in the
code and documentation.
Reviewed By: skcho
Differential Revision: D16603147
fbshipit-source-id: 4a2be53de
Summary:
It's not being worked on and is not in a state where it works.
It would probably better to write this as a script of some kind or else
resurrect this subcommand in a form where it behaves more like a script,
ie fork/execs infer analyses instead of having them be function calls
(but then it might as well *be* a script as it would likely be more
flexible).
In any case...
youarealreadydead
Reviewed By: ezgicicek
Differential Revision: D16602417
fbshipit-source-id: d0d129539
Summary:
These have proved to be too fragile to maintain as they would often break
compilation of user code. They have been off by default for more than a year
now (D7350715).
Removing the include models shows a more accurate picture of what infer results
look like in production. As such, lots of tests have changed, mostly
biabduction but also in inferbo. SIOF was using include-based models too but
now libc++ is better and iostreams are implemented in a way that SIOF
understands (instead of being magical creatures) so nothing changed there.
Reviewed By: skcho
Differential Revision: D16602171
fbshipit-source-id: ce38f045b
Summary:
- make most behaviours independent of the java version so that either works fine without user intervention
- modify regexp used to parse `javac` output to work for all versions
- no need to be sure we are in Java 11 to match java 11-only method name in quandary
- for the rest, provide a command-line flag to specify the java version manually in case it differs from the version that infer was built against
- this only affects the Maven integration for now
To do all that, also change the configure script to record the version of java instead of just a boolean for whether it's >= 10.
Reviewed By: ezgicicek
Differential Revision: D16493988
fbshipit-source-id: 622e91b25
Summary:
The default values of config options can sometimes depend on build-time
configuration values. This makes checking that the manuals "remain the same"
trickier as the manuals can be different depending on the platform. This
removes *all* default values from the checked-in manuals. We could be more
fine-grained and scrub only the values that are susceptible to change but for
now this is probably good enough.
This is done by implementing new options `--help-scrubbed` and
`--help-scrubbed-full` and using these in our tests instead of `--help` and
`--help-full` (which remain unaffected).
Also don't wrap the default values in `$(i,...)` anymore because the defaults
can trigger line breaks and then the man page is ill-formatted because that
format is stupid.
Reviewed By: mityal
Differential Revision: D16543779
fbshipit-source-id: bc929ff8c
Summary:
As discussed in D16358474, the options `--reanalyze` and `--incremental-analysis` are not compatible
This diff warns about the compatibility problem in the documentation
Reviewed By: jvillard
Differential Revision: D16440482
fbshipit-source-id: ab841ace6
Summary:
Add a flag to enable incremental diff analysis, where old summaries are not recomputed unless necessary
The implementation for this flag will follow
Reviewed By: ngorogiannis
Differential Revision: D16222865
fbshipit-source-id: e7e225a87
Nikos Gorogiannis
Mitya Lyubarskiy
Jules Villard
Dulma Churchill
Sungkeun Cho
Fernando Gasperi Jabalera
Ezgi Çiçek
Artem Pianykh
Radu Grigore
Martin Trojer
Taras Tsugrii
Phoebe Nichols