Summary:
Another poorman's library, this time about Pulse Domains. Also renames
`PulseDomain` to `PulseBaseDomain`.
Reviewed By: ezgicicek
Differential Revision: D17955287
fbshipit-source-id: 9c947cf98
Summary:
The name had rotten: it should be `AddrHistPair`. There is little value
of exposing the type of the pair `AbstractValue.t * ValueHistory.t`,
just inline its definition everywhere.
Reviewed By: ezgicicek
Differential Revision: D17955283
fbshipit-source-id: d145251e0
Summary:
See explanations in D17955104.
This renames `AbstractAddress` to `AbstractValue` since they are not
necessarily addresses.
Reviewed By: ezgicicek
Differential Revision: D17955290
fbshipit-source-id: 8bb4c61f2
Summary:
See explanations in D17955104. I put Attributes inside PulseAttribute
instead of creating a new file to avoid exposing more internals about
ranks.
Reviewed By: ezgicicek
Differential Revision: D17955284
fbshipit-source-id: a8719a58f
Summary:
Problem: PulseDomain.ml is pretty big, and contains lots of small
modules. The Infer build being a bit monolithic at the moment, it is
hard to split all these small modules off without creating some
confusion about which abstraction barries lay where. For instance, it's
fine to use `PulseDomain.ValueHistory` anywhere, but using `PulseDomain`
itself is sometimes bad when one should use `PulseAbductiveDomain`
instead.
Proposal: a poorman's library mechanism based on module aliasing. This
stack of diffs creates new Pulse* modules for all these small, safe to
use modules, together with `PulseBasicInterface.ml`, which aliases these
modules to remove the `Pulse` prefix. At the end of the stack, it will
contain:
```
module AbstractValue = PulseAbstractValue
module Attribute = PulseAttribute
module Attributes = PulseAttribute.Attributes
module CallEvent = PulseCallEvent
module Diagnostic = PulseDiagnostic
module Invalidation = PulseInvalidation
module Trace = PulseTrace
module ValueHistory = PulseValueHistory
```
This "interface" module can be opened in other pulse modules freely.
Reviewed By: ezgicicek
Differential Revision: D17955104
fbshipit-source-id: 13d3aa2b5
Summary: In preparation for improvements to the arithmetic reasoning.
Reviewed By: dulmarod
Differential Revision: D17977207
fbshipit-source-id: ee98e0772
Summary:
Domain for thread-type. The main goals are
- Track code paths that are explicitly on UI thread (via annotations, or assertions).
- Maintain UI-thread-ness through the call stack (if a callee is on UI thread then the
trace any call site must be on the UI thread too).
- If we are not on the UI thread we assume we are on a background thread.
- Traces with "UI-thread" status cannot interleave but all other combinations can.
- We do not track other annotations (eg WorkerThread or AnyThread) as they can be
erroneously applied -- other checkers should catch those errors (annotation reachability).
- Top is AnyThread, and is used as the initial state for analysis.
Interestingly, by choosing the right strategy for choosing initial state and applying callee summaries gets rid of some false negatives in the tests even though we have not introduced any path sensitivity yet.
Reviewed By: jvillard
Differential Revision: D17929390
fbshipit-source-id: d72871034
Summary: For Objective-C methods we match the mangled names (the field is name in the profiler samples).
Reviewed By: skcho
Differential Revision: D17952552
fbshipit-source-id: 308d415f6
Summary:
bigmacro_bender
There are 3 ways pulse tracks history. This is at least one too many. So
far, we have:
1. "histories": a humble list of "events" like "assigned here", "returned from call", ...
2. "interproc actions": a structured nesting of calls with a final "action", eg "f calls g calls h which does blah"
3. "traces", which combine one history with one interproc action
This diff gets rid of interproc actions and makes histories include
"nested" callee histories too. This allows pulse to track and display
how a value got assigned across function calls.
Traces are now more powerful and interleave histories and interproc
actions. This allows pulse to track how a value is fed into an action,
for instance performed in callee, which itself creates some more
(potentially now interprocedural) history before going to the next step
of the action (either another call or the action itself).
This gives much better traces, and some examples are added to showcase
this.
There are a lot of changes when applying summaries to keep track of
histories more accurately than was done before, but also a few
simplifications that give additional evidence that this is the right
concept.
Reviewed By: skcho
Differential Revision: D17908942
fbshipit-source-id: 3b62eaf78
Summary:
Java method annotations are ambiguous in that there is no difference between
annotating the return value of a method, and annotating the method itself.
The disambiguation is done entirely based on the meaning of the annotation.
Here, while `UiThread`/`MainThread` are genuine method/class annotations
and not return annotations, the reverse is true for `ForUiThread`/`ForNonUiThread`.
This means that these latter annotations do not determine the thread status of
the method they are attached to.
Here we fix that misunderstanding.
Reviewed By: jvillard
Differential Revision: D17960994
fbshipit-source-id: 5aecfb124
Summary: As per title. These test pass already because the previous thread domain was sufficient to express them. This won't necessarily be true when the whole-program analysis version comes around, because we may decide to not report on the `Threaded` elements (see domain).
Reviewed By: dulmarod
Differential Revision: D17930653
fbshipit-source-id: 2174f6b22
Summary:
- Adds ATD file to parse the clang profiler samples
- Procnames don't help us here because we want to use mangled names, not the version of names that Infer needs, so passing in the RangeMap also ClangProc that just include the names and mangled names.
- First matching of c functions to have something in place to add a test, matching further method kinds to be done in next diff.
Reviewed By: skcho
Differential Revision: D17877071
fbshipit-source-id: b31d651a7
Summary:
I dunno, seemed wrong before. About to introduce another attribute with
similar arguments so making them consistent in advance.
Reviewed By: skcho
Differential Revision: D17930349
fbshipit-source-id: 944b58bac
Summary:
- add the variable being declared so we can report it back in the trace in addition to its location
- distinguish between local vars and formals
Reviewed By: skcho
Differential Revision: D17930348
fbshipit-source-id: a5b863e64
Summary:
The Used globals (pre-)analysis produces results queried by
Control. This diff adds a type definition for these and moves the
query into the Used_globals module.
Reviewed By: bennostein
Differential Revision: D17856879
fbshipit-source-id: 0211b82d7
Summary:
To avoid code explosion, the frontend emits move instructions for
expressions with more than one use. This diff relaxes this slightly by
allowing duplication of casts.
Reviewed By: bennostein
Differential Revision: D17856384
fbshipit-source-id: 6f6c496ef
Summary:
The frontend translation of exceptional control flow is untrusted
enough that it makes sense to disable it by default.
Reviewed By: bennostein
Differential Revision: D16061018
fbshipit-source-id: 65dca36ae
Summary:
The CFG of a function is implicit in the blocks themselves, so it is
possible to remove the explicit represention as a vector of
blocks. The only uses are fold or iter, and since the cycles are
detected during construction, these can be simple depth-first
traversals.
Reviewed By: bennostein
Differential Revision: D17821845
fbshipit-source-id: fc7a02151
Summary:
- Putting test determinator in own directory
- Putting Java procname creation stuff in its own module
Reviewed By: skcho
Differential Revision: D17929885
fbshipit-source-id: 4f2578566
Summary:
Eventually thread status will be stored inside every critical pair so as to allow path sensitivity. That means that the status can no longer be a whole trace, as this will quickly become intractable, because each domain element would have to maintain its own trace as well as its own thread-status trace.
This is not great, as we lose information here, but I don't see any other way around it that is not super complicated/costly (sharing will be limited when moving from callee to caller).
Other diffs up the stack will clean up infrastructure no longer used meaningfully (ie models and domains).
Reviewed By: mityal
Differential Revision: D17908908
fbshipit-source-id: 3bf353e33
Summary:
Starvation is currently path insensitive. Two special cases of sensitivity cover a large range of useful cases:
- sensitivity on whether the current thread is a UI/background thread;
- sensitivity on whether a lock can be acquired (without blocking) or not.
We add a few tests capturing some of the false positives and negatives of the current analysis.
Reviewed By: mityal
Differential Revision: D17907492
fbshipit-source-id: fbce896ac
Summary:
This diff adopts an array length evaluation function that is conservative. It is useful when our
domain cannot express length result precisely.
For example, suppose there is an array pointer `arr_locs` that may point to two arrays `a` and `b`,
and their lengths are `a.length` and `b.length` (symbols), respectively. Using the usual
evaluation, our current domain cannot express `a.length join b.length` (join of two symbolic
values), so it returns top.
In this case, we can use the conservative function intead. It evaluates the length as `[0,
a.length.ub + b.length.ub]`, since we know every array length is positive. The result is not
precise, but better than top.
Reviewed By: ezgicicek
Differential Revision: D17908859
fbshipit-source-id: 7c0b1591b
Summary:
Fix a bug where the actual return variable was not scoped correctly in
cases where its name clashed with a local or formal of the
callee. Also comment and simplify to attempt to make more
understandable.
Reviewed By: bennostein
Differential Revision: D17801944
fbshipit-source-id: 286739241
Summary:
Some code that is otherwise benignly scalar still uses the
ExtractElement and InsertElement vector operations, so translate them
as if they were array operations.
Reviewed By: ngorogiannis
Differential Revision: D17801949
fbshipit-source-id: 89f3666bd
Summary:
Previously, the LLVM semantics could be stuck where the LLAIR semantics
was not yet stuck, but would become stuck (at the same place) after
taking a step. This was due to LLVM using the traditional definition of
stuck states: any state from which there are no transitions. However,
LLAIR cannot do that because it might get stuck in the middle of a block
that contains several visible stores. We don't want to consider the
whole block stuck, nor can we finish it. Thus, the LLAIR definition of
stuckness is when the state has the stuck flag set which happens when
stopping in the middle of a block after encountering a stuck
instruction. Now LLVM takes the same approach.
Reviewed By: jberdine
Differential Revision: D17855085
fbshipit-source-id: a094d25d5
Summary:
Add an argument to the Exit instruction. Update the LLVM semantics to
execute the Exit instruction and store the result in an "exited"
component of the state. (Previously it just noticed that it was stuck
about to do an Exit.)
With exiting treated uniformly, now in the proof that for every LLVM
trace, there is a llair trace that simulates it, all of the cheats
except for 1 are just cases that I haven't got to yet. However, the last
cheat is for the situation where the LLVM program gets stuck and the
llair program doesn't. For example, the following two line LLVM program
gets stuck because r2 is not assigned (ignoring for the moment the static
restriction that LLVM is in SSA form).
r1 := r2
Exit(0)
The compilation to llair omits the assignment and so we get a llair
program that doesn't get stuck:
Exit(0)
The key question is whether the static restrictions are sufficient to
ensure that no expression that might be omitted can get stuck.
Reviewed By: jberdine
Differential Revision: D17737589
fbshipit-source-id: bc6c01a1b
Summary:
If the LLVM to llair translation keeps a mapping from register r to
expression e, then for each register r' mentioned in e, there must be an
assignment to r' that dominates the entire live range of r. Thus, where
ever r might be replaced by e, the value of r' will be the same as it
was when the initial assignment to r occurred. Maintaining this
invariant relies on the LLVM being in SSA form.
Reviewed By: jberdine
Differential Revision: D17710288
fbshipit-source-id: fd3eaa57d
Summary:
This is work in progress; many of the cheats aren't true. In particular,
the definition of stuck/complete/partial traces in LLVM and llair don't
quite match up and need some modification. Also, the state relation
isn't strong enough; it will need to include information about registers
used in the expressions of the LLVM register to llair expression
mapping. But the overall shape of the proof is ok and so it can be
used to poke at various local aspects of the translation, such as
individual instructions.
Reviewed By: jberdine
Differential Revision: D17631604
fbshipit-source-id: 743b5d64d
Summary:
This will avoid printing stuff like
"0$?%__sil_tmpSIL_materialize_temp__n$2 declared" to the poor
unsuspecting user. The non-verbose stuff is used only by pulse so far as
far I can tell so hopefully this doesn't break anything.
Reviewed By: ezgicicek
Differential Revision: D17908943
fbshipit-source-id: 8ef4f1a8f
Summary:
Instead of a string argument named `~str` pass `Formal | Global` and let
`add_to_errlog` figure out how to print it.
Reviewed By: ezgicicek
Differential Revision: D17907657
fbshipit-source-id: ed09aab72
Jules Villard
Nikos Gorogiannis
Dulma Churchill
Ezgi Çiçek
Josh Berdine
Sungkeun Cho
Scott Owens