Summary:
Cosmetic changes to comments to improve the results of the Reason
comment attachment logic.
These were found using `git grep -nH -e 'in[ ]*(\*'` although the
attachment logic seems ok if the associated `let` is on the same line.
Some others were found with `git grep -nH -e ')[ ]*(\*'` although the
attachment logic seems ok if the associated `(` is on the same line.
Reviewed By: jvillard
Differential Revision: D3654027
fbshipit-source-id: 122aa3b
Summary: Move Sil.binop type and operations into separate Binop module.
Reviewed By: dulmarod
Differential Revision: D3548082
fbshipit-source-id: 356bee3
Summary: Move Sil.const type and operations into separate Const module.
Reviewed By: dulmarod
Differential Revision: D3548073
fbshipit-source-id: 388d03e
Summary:
Move attribute values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: cristianoc
Differential Revision: D3548055
fbshipit-source-id: 31a9121
Summary:
Move closure values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: sblackshear
Differential Revision: D3541364
fbshipit-source-id: 1a2f998
Summary:
Move exception values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: sblackshear
Differential Revision: D3541355
fbshipit-source-id: f22e0ba
Summary:
Now that array types record only static - and therefore constant -
lengths, Sil typ and exp no longer need to be mutually recursive.
This diff:
- splits the recursion in the type definitions of typ and exp,
- splits the recursion in the comparison and pretty-printing
functions,
- and then refactors typ into a separate module.
Reviewed By: cristianoc
Differential Revision: D3423575
fbshipit-source-id: 6130630
Summary:
This diff refactors Sil.Int, which represents integer literals, into a
separate module IntLit. There are no dependencies forcing Sil.Int to
be a submodule of Sil, and it is also no simpler as a submodule.
Reviewed By: cristianoc
Differential Revision: D3422910
fbshipit-source-id: 63013f2
Summary:
Array types where the length is not statically known were represented
using fresh variables. This diff:
- Makes array type length optional, reducing the amount of work needed
for renaming, substitution, and normalization.
- Revises uses of array length so that the length component of a
Tarray type represents only the statically determined constant
length of an array type, and the length component of a Sizeof
expression represents the dynamically determined length of an array
value.
- Restricts the type of static lengths from a general expression
(Sil.exp) to an integer (Sil.Int.t), enforcing that static types are
constant. This in particular ensures that types contain no
variables, and so are invariant under operations such as renaming
and substitution.
- Removes the type substitution and renaming functions typ_sub,
typ_normalize, and typ_captured_ren. Now that array type lengths
are constant integers, all of these functions are the identity.
Reviewed By: cristianoc
Differential Revision: D3387343
fbshipit-source-id: b5db768
Summary:
This diff extends Sizeof expressions with an optional expression for the
length of the final extensible array, if any. For example, sizeof a
simple array `sizeof(t[n])` is represented by (modulo subtyping info)
`Sizeof t (Some n)`, and sizeof a struct whose final member is an array
`sizeof(struct s {... t[n] f})` is represented by `Sizeof (struct s
{... t[n] f}) (Some n)`.
This is an intermediate step toward eliminating expressions from types,
the redundancy between the length in the types and in the sizeof
expressions will be eliminated later.
Reviewed By: cristianoc
Differential Revision: D3358763
fbshipit-source-id: 2239bca
Summary:
Reimplement command line options in preparation for uniformly passing
options from the top-level infer driver that invokes a build command
through the build system to the descendant infer processes.
All command line options of all executables are collected into Config,
and declared using a new CommandLineOption module that supports
maintining backward compatibility with the current command line
interface. Very few values representing command line options are
mutable now, as they are set once during parsing but are constant
thereafter. All ordering dependencies are contained within the
implementation of Config, and the implementation of Config is careful to
avoid unintended interactions and ordering dependencies between options.
Reviewed By: jvillard
Differential Revision: D3273345
fbshipit-source-id: 8e8c6fa
Summary:public
Refactor Utils.SymOp into a separate module, bringing the failure_kind
type and associated operations.
Reviewed By: cristianoc
Differential Revision: D3161640
fb-gh-sync-id: be3d7c9
fbshipit-source-id: be3d7c9
Summary:public
Eliminate the use of the -open Utils command line option passed to the compiler in favor of `open! Utils` in each source file. While slightly convenient, this option causes more headaches than it is worth with other tools e.g. merlin.
Reviewed By: jvillard
Differential Revision: D3168193
fb-gh-sync-id: 4285ef6
fbshipit-source-id: 4285ef6
Summary:public
Revamped Timeout module by storing elapsed wallclock seconds, and the status of symops, in case of recursive calls.
Extended the API with suspend() and resume() to pause and resume the current timeout.
These are used before and after an on-demand call to the analysis functions.
This achieves the effect that each procedure, even though is interrupted, has its own time and symop counters, which are suspended and resumed as required.
Reviewed By: jeremydubreil
Differential Revision: D2976918
fb-gh-sync-id: 0ed1079
shipit-source-id: 0ed1079
Summary:public
I have seen enough comments in this space by people during code review to switch on the analyses the compiler can already do. This diff is an automated renaming of unused identifiers to _, with a few additional changes made when reading the diff of the results for things that stood out as particularly strange. This base-lines all of the existing warnings. I'm not sure this is a good idea, since it might be better for those familiar with each part of the code to look at these warnings and use them as pointers to suspicious code.
Reviewed By: jeremydubreil
Differential Revision: D2938376
fb-gh-sync-id: 6e67817
shipit-source-id: 6e67817
Summary:
public
Using Typename.t in the list of superclasses to match the type for the key of the type environment. This avoids to make back and forth convertions from typename to type (csu, mangled name).
Depends on D2786574
Reviewed By: jberdine
Differential Revision: D2792116
fb-gh-sync-id: 6100f1a
Summary:
public
Move the naming of types to it own module, so that it can be used by modules `Sil` depends from like `Procname`
Reviewed By: jberdine
Differential Revision: D2773148
fb-gh-sync-id: a89f595
Summary:
public
Move the representation of data-structure into it own module, so that it can be used by modules `Sil` depends from like `Procname`.
Reviewed By: jberdine
Differential Revision: D2772791
fb-gh-sync-id: cda4e3a
Summary: public Crashes during the analysis are classified as timeouts in the .specs file. In addition, when there is a timeout, it does not say *why* the timeout occurred (hard time, symops, or recursion). This diff adds this information to the .specs file and adds a "fail hard" mode where crashes and timeouts will actually stop the analysis in developer mode (but will still be hidden in the normal production mode).
Reviewed By: jeremydubreil
Differential Revision: D2725382
fb-gh-sync-id: b0b4e5e
Summary: public
`this` can't be null in C++ methods, make backend aware of it.
Behavior for other languages remains the same
Reviewed By: dulmarod
Differential Revision: D2668945
fb-gh-sync-id: c85acbf
Summary: public
modules are better for namespacing.
How I made this diff:
1. moved list_* functions from utils.ml{,i} to iList.ml{,i}
2. shell commands:
grep '^val ' infer/src/backend/iList.mli | cut -f 2 -d ' ' | tr '\n' ' '
# gives a list of former list_ functions that IList implements, fed into the loops below:
LISTNAMES=" compare equal append combine exists filter flatten flatten_options find fold_left fold_left2 for_all for_all2 hd iter iter2 length fold_right map mem nth partition rev rev_append rev_map sort split stable_sort tl drop_first drop_last rev_with_acc remove_duplicates remove_irrelevant_duplicates merge_sorted_nodup intersect mem_assoc assoc map2 to_string"
# replace " list_*" function calls with IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/ list_$i\b/ IList.$i/g" \{\} \; ; done
# replace (list_* functions with (IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/(list_$i\b/(IList.$i/g" \{\} \; ; done
# ditto with [
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/\[list_$i\b/[IList.$i/g" \{\} \; ; done
3. Then fix up the rest by hand. In particular, stuff that called Utils.list_*
explicitely, and stuff that used the "Fail" exception that has moved to
IList. (may revisit this in the future)
Reviewed By: jeremydubreil, cristianoc
Differential Revision: D2550241
fb-gh-sync-id: cd64b10
Summary:
Move proc_attributes to a separate module.
Field err_log, in common between proc desc and summary, can now be moved to ProcAttributes without creating cycles of dependencies.
Summary:
There's a lot of overlap between the representation of a proc desc and a spec summary. This diff moves all the data in common to the single record proc_attributes defined in Sil.
This gives a unified way of accessing most of the data carried by a procedure, whether it is contained in a proc desc or a spec. Also, it ensures that there is a single flow of information from proc desc to spec in the back-end, making sure that the information represented stays consistent.
Summary:
This commit is the result of
`find infer/src -name '*.ml' -or -name '*.mli' -exec ocp-indent -i \{\} \;`
and
`INFER_CHECK_COPYRIGHT=1 InferPrint`
Summary:
This reverts commit 306f5b71c24042c89f71848898402cbc9269c543.
Turns out that developers think that this bugs should be fixed. So leaving it in for now until I gather more information.
Summary:
@public
There are many FPs of the form init method that contains
if ((self = [super initWithFrame:frame])) {
...
}
return self;
then an object being initialised with that constructor and added to an array or dictionary.
There we flag NPE and very likely that won't be a bug. So I'm removing the option for self
to be nil in the constructor, which should solve the problem.
Test Plan: Changed the relevant test.
Josh Berdine
Sam Blackshear
Cristiano Calcagno
Dulma Rodriguez
jrm
Andrzej Kotulski
Jules Villard
Open Source Synchronization