Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary:
I needed to do this for something, now I don't know if I want to do the thing
anymore but this seems generally useful to decrease a little bit the size of
Config.ml.
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6796427
fbshipit-source-id: d9c009d
Summary:
Also, always log failures.
This also shows that the dead code detection does not detect dead exceptions :/
Reviewed By: jeremydubreil
Differential Revision: D6796843
fbshipit-source-id: 3d0ff5c
Summary:
Also, make it explicit when we load the global tenv instead of the per-file tenv.
This allows for some nice simplifications in some places, notably:
- `tenv_file` is gone from `Exe_env.file_data`
- `DB.global_tenv_fname` is no more
This will help moving the tenv from the capture/source_file/ directories on the
filesystem to the database, as keys for the relevant table are `SourceFile.t`.
Reviewed By: mbouaziz
Differential Revision: D6796594
fbshipit-source-id: 1ffd5b0
Summary:
They were constructed for each source file, and then joined into a global call
graph, only to get per-file lists of procedures. A tad wasteful.
Get this list from cfgs instead. Still record them in `exe_env` for now as
changing that code is a whole other beast.
One test falls victim of the flakiness of the analysis of recursive functions.
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D6324268
fbshipit-source-id: d5ff58f
Summary:
Last piece of significant logic relying on the call graph: the execution
environment. Mostly carve out the logic to detect duplicate symbols to not rely
on the call graph.
Also make the keys of the `file_map` be source files, because not having the
"cg filename" makes it harder otherwise.
Reviewed By: sblackshear
Differential Revision: D6621196
fbshipit-source-id: cab50ba
Summary:
In preparation for getting rid of call graphs, we need to find another way to
get the list of defined procedures (which is the only place where we use the
globally-computed call graph for now).
The natural way to get the list of procedures defined in a file is to load the
cfg for that file and look at the proc names that are the keys of the cfg. This
is way too expensive, as the CFG is big. Thus, we cache this list of proc names
as another column in the SQLite database of cfgs. This gives good performance
in benchmarks.
Reviewed By: jeremydubreil
Differential Revision: D6621142
fbshipit-source-id: ed265fe
Summary: At each call to `Component$Builder.build()`, checks that the required props for `Component` have been set via prior calls to the `Builder`. Does not yet handle `Prop(optional = true)`, but will address that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6735524
fbshipit-source-id: 0c812fd
Summary:
Record the db schema, infer version, and run dates into
infer-out/.infer_runstate.json. This allows us to check on startup whether the
results directory was generated using a compatible version of infer or not, and
give a better error message in the latter case than some SQLite error about
mismatching tables.
This will be used in a follow-up diff to record capture phases too, and avoid
relying on filesystem timestamps of the infer-out/capture/foo/ directories for
reactive analysis.
Had to change some tests Makefiles to make sure they do not attempt to re-use
stale infer-out directories, which would now fail the run.
The stale infer-out directory gets deleted if `--force-delete-results-dir` is
passed (but a warning still gets printed).
Reviewed By: mbouaziz
Differential Revision: D6760787
fbshipit-source-id: f36f7df
Summary:
This declutters `CommandLineOption` a little bit, and will be useful in a
follow-up diff where `InferCommand.t` will be used from an atd-generated file.
Reviewed By: mbouaziz
Differential Revision: D6772990
fbshipit-source-id: 3d32d00
Summary:
Reading a different .inferconfig makes little sense and is in contradiction
with the fact that we try hard to make all the infer processes agree on the set
of options.
Reviewed By: sblackshear
Differential Revision: D6761146
fbshipit-source-id: 67a0c54
Summary:
- During program translation, infer logs details about Unimplemented exceptions that are caught
- Exception type, source location, exception triggering location, and the ast_item it occurred in
- Logging is integrated with EventLogger library
- New type of event in EventLogger
- Unimplemented exception type extended to add support for storing these extra details
- All instances where unimplemented exception is raised modified to pass these details
Reviewed By: dulmarod
Differential Revision: D6748734
fbshipit-source-id: 725c7f3
Summary:
Getting double-logged messages when logs have not yet been setup is confusing,
so just don't log these messages to a log file.
Reviewed By: mbouaziz
Differential Revision: D6739173
fbshipit-source-id: 14db6b0
Summary: Use the Hashtbl functions directly as `Cfg` knows that a cfg is a hashtbl.
Reviewed By: sblackshear, jeremydubreil
Differential Revision: D6727732
fbshipit-source-id: 2cdda91
Summary:
Found the dead code with the script in the next commit, iteratively until no
warnings remained.
Methodology:
1. I kept pretty-printers for values, which can be useful to use from infer's REPL (or
when printf-debugging infer in general)
2. I kept functions that formed some consistent API (but not often, so YMMV), for instance if it looked like `Set.S`, or if it provides utility functions for stuff in development (mostly the procname dispatcher functions)
3. I tried not to lose comments associated with values no longer exported: if the value is commented in the .mli and not the .ml, I moved the comment
4. Some comments needed updating (not claiming I caught all of those)
5. Sometimes I rewrote the comments a bit when I noticed mis-attached comments
Reviewed By: mbouaziz
Differential Revision: D6723482
fbshipit-source-id: eabaafd
Summary:
Almost all the files are supposed to do this. When they don't, the build adds
it automatically anyway, but it's better to always include it to avoid
confusion (and help other automated tools).
Reviewed By: mbouaziz
Differential Revision: D6723285
fbshipit-source-id: 0fe8a16
Summary:
- After completing program translation, infer logs # of attempted procedure translations and # of completed procedure translations via EventLogger
- New possible type of event in EventLogger
Reviewed By: dulmarod
Differential Revision: D6711662
fbshipit-source-id: 5e31332
Summary:
This commit augments codes to clean up temporary files generated by the clang frontend.
Currently clang frontend leaves large number of temporary files int the tmp directory, and it could be seen for example by running these command:
```
git clean -xdf infer/models/
mkdir /tmp/infer
env TMPDIR=/tmp/infer make infer_models
ls -l /tmp/infer
```
P.S. Analyzing real project could easily cause each infer capture to leave hundreds of files in /tmp
P.P.S. There are 11 total references to Filename.temp_file however, other 9 seems don't leak temporary files in such large scale (at least not when using the clang frontend).
Closes https://github.com/facebook/infer/pull/816
Reviewed By: jvillard
Differential Revision: D6385311
Pulled By: dulmarod
fbshipit-source-id: f7956b0
Summary: Get the error message from the database when there's an error, together with the error type.
Reviewed By: mbouaziz
Differential Revision: D6621695
fbshipit-source-id: 6bc706d
Summary: Somehow sqlite allows this simpler statement when using `exec` but not `prepare`.
Reviewed By: mbouaziz
Differential Revision: D6407732
fbshipit-source-id: 01f029f
Summary:
This makes sure that sqlite doesn't hold read locks for longer than necessary,
which could starve the process of cleaning up the WAL file. This ensures that
the statement is reset as soon as we're done reading.
I haven't observed a difference with this change, and could not find evidence
that it should change something in the docs. Internet wisdom pointed at this as
a potential issue and I was observing it in another change, so it's good to
rule it out.
Reviewed By: mbouaziz
Differential Revision: D6404353
fbshipit-source-id: a123cd6
Summary: Previously we had a single sanitizer kind for escaping, but this isn't quite right. A function that escapes a URL doesn't necessarily make a string safe to execute in SQL, for example.
Reviewed By: the-st0rm
Differential Revision: D6656376
fbshipit-source-id: 572944e
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary: This factors out some duplicated code for {,de}serializing source files.
Reviewed By: mbouaziz
Differential Revision: D6324234
fbshipit-source-id: 1741657
Summary:
Instead of storing the cfgs of source files inside their own individual files,
put them in results.db, in their own table. (that table may change in the
future to map source files to more than just their cfgs, eg their tenv as well)
Reviewed By: jberdine
Differential Revision: D6297201
fbshipit-source-id: 7fa891d
Summary: There was a back and forth conversion between `string` and `IssueType.t` which was not necessary.
Reviewed By: sblackshear
Differential Revision: D6562747
fbshipit-source-id: 70b57a2
Summary: In every place this was used except one, `debug_mode` is also used as a gate.
Reviewed By: jeremydubreil
Differential Revision: D6450913
fbshipit-source-id: 6a5716d
Summary:
On spinning disks the performance of commits are worse when `synchronous=NORMAL`.
Reading the documentation of SQLite, when `synchronous=OFF` there's a risk of DB corruption when the operating system crashes or the computer loses power before that data has been written to the disk surface; on the other hand, a crash in Infer should keep data in the DB in a sound state.
Buck reached the same conclusions too: 4680162279
Reviewed By: mbouaziz
Differential Revision: D6413384
fbshipit-source-id: 99e4650
Summary:
This is a good moment to close Sqlite's DB handles, and in general can be used to postpone some actions right before infer terminates.
Since exiting is done via uncaught exception handling, the `late_epilogue` callback will run at the very end, even after all the `at_exit` callbacks have been invoked. The only exception is made in case of signalling, in which case the `late_epilogue` is still invoked, but before any of the `at_exit` callbacks.
Reviewed By: jvillard
Differential Revision: D6404961
fbshipit-source-id: 8ff7a05
Summary:
- Plug model checkers
- Add alloc size safety condition on alloc of negative, zero or big size
Reviewed By: sblackshear
Differential Revision: D6375144
fbshipit-source-id: bbea6f3
Summary: There is a lot of code to create LaTeX output of the Infer datastructures, but this does not seem to be used anymore.
Reviewed By: jvillard
Differential Revision: D6355686
fbshipit-source-id: 55de8e9
Summary: This option was for compatibility with the command line options of the previous, but is no longer used. This diff removes the option and the deprecated code.
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6351097
fbshipit-source-id: 0e4cfc5
Summary: This will avoid confusions when running `-a infer --racerd` which would silently not running RacerD before this diff.
Reviewed By: sblackshear
Differential Revision: D6374139
fbshipit-source-id: 2cb5004
Summary:
Naming a variable `_foo` makes the compiler not warn about them if they are
unused, but there are lots of instances of such variables in the code where
they are in fact used, defeating the warning and introducing confusion for
those used to this naming convention.
Basically `sed -i -e "s/ _\([a-zA-Z][a-zA-Z0-9_']*\)/ \1_/g" **/*.ml` followed
by manual fixing of compilation errors (lots of `compare__foo` ->
`compare_foo_`).
Reviewed By: mbouaziz
Differential Revision: D6358837
fbshipit-source-id: 7ffb4ac
Summary:
To resole #797 this adds runtime option to select VFS for SQLite,
When infer runs on WSL this defaults to "unix-excl" (https://sqlite.org/vfs.html) and if VFS is specified, then WAL is not enabled (since WAL is non compatible with custom VFS - https://www.sqlite.org/wal.html).
Closes https://github.com/facebook/infer/pull/798
Reviewed By: jvillard
Differential Revision: D6335037
Pulled By: dulmarod
fbshipit-source-id: d9b9a58
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
This diff takes the first step toward a more general filtering
system. This step is concerned only with filtering at the reporting
stage, filtering for the capture and analysis stages is left for
later.
This diff adds a new command line / config option
```
--filter-report +string
Specify a filter for issues to report. If multiple filters are
specified, they are applied in the order in which they are
specified. Each filter is applied to each issue detected, and only
issues which are accepted by all filters are reported. Each filter
is of the form:
`<issue_type_regex>:<filename_regex>:<reason_string>`. The first
two components are OCaml Str regular expressions, with an optional
`!` character prefix. If a regex has a `!` prefix, the polarity is
inverted, and the filter becomes a "blacklist" instead of a
"whitelist". Each filter is interpreted as an implication: an issue
matches if it does not match the `issue_type_regex` or if it does
match the `filename_regex`. The filenames that are tested by the
regex are relative to the `--project-root` directory. The
`<reason_string>` is a non-empty string used to explain why the
issue was filtered.
See also infer-report(1) and infer-run(1).
```
Reviewed By: jvillard
Differential Revision: D6182486
fbshipit-source-id: 9d3922b
Summary:
Use a distinct issue type for the Java and C++ concurrency analyses,
as the properties they are checking are significantly different.
Reviewed By: sblackshear
Differential Revision: D6151682
fbshipit-source-id: 00e00eb
Summary:
:
Make both buck capture and compilation database handle buck command line arguments and invoke buck query the same way.
Plus allow:
- target patterns `//some/dir:` and `//some/dir/...`. However since `//some/dir:#flavor` and `//some/dir/...#flavor` are not supported, they need to be expanded before adding the infer flavor.
- target aliases (defined in `.buckconfig`)
- shortcuts `//some/dir` rewritten to `//some/dir:dir`
- relative path `some/dir:name` rewritten to `//some/dir:name`
Reviewed By: jvillard
Differential Revision: D5321087
fbshipit-source-id: 48876d4
Summary:
Linters are now considered a "checker", like backend checkers. This makes, eg,
`--racerd-only` disable the linters, which is more intuitive.
We can now express `-a linters` and `--clang-frontend-action` in terms of these
two new options. For instance, `-a linters --clang-frontend-action lint` is the
same as `--linters-only --no-capture`.
This is another step in the direction of getting rid of `--analyzers`.
Reviewed By: dulmarod
Differential Revision: D6147387
fbshipit-source-id: 53622b2
Summary: A stepping stone to have descriptive issue types for each kind of flow rather that lumping everything into `QUANDARY_TAINT_ERROR`.
Reviewed By: mbouaziz
Differential Revision: D6126690
fbshipit-source-id: a7230c0
Summary: This check is deprecated and will be replaced by a dedicated checker to detect unitialized values.
Reviewed By: mbouaziz
Differential Revision: D6133108
fbshipit-source-id: 1c0e9ac
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Buck reads the version on stderr or, very recently, from either stdout or stderr.
This makes infer output the version of stderr when called from Buck or invoked as javac, and on stdout otherwise.
Reviewed By: martinoluca
Differential Revision: D6098392
fbshipit-source-id: 23f1d5a
Summary: This makes `--biabduction-blacklist-path-regex` and others work as expected.
Reviewed By: mbouaziz
Differential Revision: D6088625
fbshipit-source-id: 8f1daa3
Summary:
This is a better default than running the biabduction analysis only, now that
we have several mature checkers.
Reviewed By: jeremydubreil
Differential Revision: D6051186
fbshipit-source-id: 04ac0c6
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
This is useful if some command behaves like one infer knows how to integrate with. For instance:
```
infer --force-integration clang -- clang-3.8 -c examples/hello.c
```
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D6051589
fbshipit-source-id: dd693b0
Summary: The order of the elements in the list maters since the function `string_to_analyzer` will return the fist element found in the list. Inverting the `"biabduction"` and `"infer"` entries in the list allows D6051146 to have no functional implications.
Reviewed By: sblackshear
Differential Revision: D6055840
fbshipit-source-id: 6cf5ac2
Summary:
One day `-a infer` will alias `-a checkers` so for now create another, more
explicit analyzer name that can be used to migrate progressively. For instance,
after this commit what should continue to use `-a biabduction` can change to
that, so that when `-a infer` becomes an alias to `-a checkers` it can keep
working.
Reviewed By: jeremydubreil
Differential Revision: D6051146
fbshipit-source-id: 1ef4c34
Summary:
This generates `--resource-leak-only` automatically, and make the other
checkers' `-only` option work as expected with respect to `--resource-leak` too
(eg, `--resource-leak --biabduction-only` disables resource leak).
Reviewed By: jeremydubreil
Differential Revision: D6051134
fbshipit-source-id: 2d4a2ba
Summary:
1. Mark some Makefile targets as depending on `MAKEFILE_LIST` so they get rebuilt on Makefile changes
2. Do not show boolean options with no documentation in the man pages (like we do for other option types).
3. Default to Lazy dynamic dispatch for the checkers.
4. In the tests, use `--<checker>-only` instead of relying on `--no-default-checkers`
5. `--no-filtering` is redundant if `--debug-exceptions` is passed
Reviewed By: jeremydubreil
Differential Revision: D6030578
fbshipit-source-id: 3320f0a
Summary:
Another step toward running the biabduction analysis as a checker.
Depends on D6038210
Reviewed By: jvillard
Differential Revision: D6038682
fbshipit-source-id: fed45bf
Summary:
This is to avoid getting BUSY from sqlite when the machine is busy (not
necessarily busy because of infer).
Reviewed By: jberdine
Differential Revision: D6020022
fbshipit-source-id: ca0f913
Summary:
Attempting to translate these will not go well as the declaration still depends
on some template arguments. Added a test that was previously crashing the
frontend.
Also extend the catching of "Unimplemented" and other errors to `translate_one_decl` as it was useful to debug this issue. In particular, reraise all exceptions and log some additional context when doing so.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5976357
fbshipit-source-id: fca8e38
Jules Villard
Tony Hu
Sam Blackshear
Martino Luca
Varun Arora
Vladimir Silyaev
Josh Berdine
Dino Distefano
Dulma Churchill
Jeremy Dubreil
Mehdi Bouaziz