Summary:
Add support for GuardedBy: we deviate from the spec as follows:
- No warnings issued for any access within a private method, unless that method is called from a public method and the lock isn't held when the access occurs.
- Warnings are suppressed with the general RacerD mechanism, ie `ThreadSafe(enableChecks=false)`
- GuardedBy warnings override thread-safety violation warnings on the same access, because GuardedBy has a clearer and simpler contract.
Also, some simplifications, cleanups and perf improvements (eg avoid unreportable procs at the top level as opposed to on each of their accesses).
Reviewed By: jeremydubreil
Differential Revision: D14506161
fbshipit-source-id: b7d794051
Summary:
Context: "quandary" traces optimise for space by only storing a call site (plus analysis element) in a summary, as opposed to a list of call sites plus the element (i.e., a trace). When forming a report, the trace is expanded to a full one by reading the summary of the called function, and then matching up the current element with one from the summary, iterating until the trace cannot be expanded any more. In the best case, this can give a quadratic saving, as a real trace gets longer the higher one goes in the call stack, and therefore the total cost of saving that trace in each summary is quadratic in the length of the trace. Quandary traces give a linear cost.
HOWEVER, these have been a source of many subtle bugs.
1. The trace expansion strategy is very arbitrary and cannot distinguish between expanded traces that are invalid (i.e., end with a call and not an originating point, such as a field access in RacerD). Plus the strategy does not explore all expansions, just the left-most one, meaning the left most may be invalid in the above sense, but another (not left-most) isn't even though it's not discovered by the expansion. This is fixable with major surgery.
2. All real traces that lead to the same endpoint are conflated -- this is to save space because there may be exponentially many such traces. That's OK, but these traces may have different locking contexts -- one may take the lock along the way, and another may not. The expansion cannot make sure that if we are reporting a trace we have recorded as taking the lock, will actually do so. This has resulted in very confusing race reports that are superficially false positives (even though they point to the existence of a real race).
3. Expansion completely breaks down in the java/buck integration when the trace goes through f -> g -> h and f,g,h are all in distinct buck targets F,G,H and F does not depend directly on H. In that case, the summary of h is simply not available when reporting/expanding in f, so the expanded trace comes out as truncated and invalid. These are filtered out, but the filtering is buggy and kills real races too.
This diff completely replaces quandary traces in RacerD with plain explicit traces.
- This will incur the quadratic space/time cost previously saved. See test plan: there is indeed a 30% increase in summary size, but there is no slowdown. In fact, on openssl there is a 10-20% perf increase.
- For each endpoint, up to a single trace is used, as before, so no exponential explosion. However, because there is no such thing as expansion, we cannot get it wrong and change the locking context of a trace.
- This diff is emulating the previous reporting format as much as possible to allow good signal from the CI. Further diffs up this stack will remove quandary-trace specific things, and simplify further the code.
- 2 is not fully addressed -- it will require pushing the `AccessSnapshot` structure inside `TraceElem`. Further diffs.
Reviewed By: jberdine
Differential Revision: D14405600
fbshipit-source-id: d239117aa
Summary:
In ObjC there are no access modifiers. The strongest alternative is to put methods in the implementation but omit them from the interface declaration.
Put exported ObjC methods in their own field in the class structure and use that in RacerD to decide whether to report on the method.
Reviewed By: mbouaziz
Differential Revision: D13597504
fbshipit-source-id: c4a3d2705
Summary:
A lot of functors that take a `Make{SIL,HIL}` can take a `{SIL,HIL}`
directly instead. This makes my head hurt a bit less.
Reviewed By: mbouaziz
Differential Revision: D13416967
fbshipit-source-id: eb0b33bc4
Summary:
`AccessExpression.t` and `HilExp.t` are about to become mutually
recursive, this will help distinguish the actual changes from the moving
of code around.
This deletes the file left around in the previous commit to preserve
callers of `AccessExpression`.
Reviewed By: mbouaziz
Differential Revision: D13377645
fbshipit-source-id: 71338d1f3
Summary:
It's useful for checkers to know when variables go out of scope to
perform garbage collection in their domains, especially for complex
domains with non-trivial joins. This makes the analyses more precise at
little cost.
This could have been added as a custom function call to a builtin, but I
decided against it because this instruction doesn't have the semantics
of any function call. It's better for each checker to explicitly not
deal with the custom instruction instead.
Reviewed By: jberdine
Differential Revision: D13102951
fbshipit-source-id: 33be22fab
Summary:
Currently, if there are several reports on the same line, the most important one is reported together with a message containing how many reports were suppressed.
This is sometimes causing the bug hash we use believe that a report is introduced (eg if the number of suppressed reports changes).
Reviewed By: mbouaziz
Differential Revision: D13067306
fbshipit-source-id: 1cc0c6d3a
Summary:
The upcoming ocamlformat has the ability to parse and format
docstrings. This requires that the docstrings conform to the ocamldoc
spec a bit more strongly. If a docstring does not parse, it is left
alone, but if it is morally ill-formed but parses by chance, it can be
reformatted incorrectly. This patch fixes the existing instances of
this problem.
Reviewed By: mbouaziz
Differential Revision: D12911937
fbshipit-source-id: 1c2eb590b
Summary:
There were several lists constructed unnecessarily -- replaced them with find_maps
and hopefully simplified the logic.
Reviewed By: mbouaziz, jvillard
Differential Revision: D12823559
fbshipit-source-id: 1f06b20f3
Summary: To avoid reporting on private methods, ignore those starting with underscore. Other cleanups.
Reviewed By: jvillard
Differential Revision: D10558970
fbshipit-source-id: 0572f1e70
Summary: Reports will now be issued for the class loads of the methods specified by the option `--class-loads-roots`.
Reviewed By: jvillard
Differential Revision: D10466492
fbshipit-source-id: 91456d723
Summary: Since we only care about reachability, drop the interpreter and just fold over all instructions in the procdesc.
Reviewed By: mbouaziz
Differential Revision: D10461783
fbshipit-source-id: 3e0b42a48
Summary: We don't need the machinery of HIL, or its complexity for this analysis.
Reviewed By: ddino
Differential Revision: D10461641
fbshipit-source-id: 2e7d3ab8e
Summary: First version of an analyzer collecting classes transitively touched.
Reviewed By: mbouaziz
Differential Revision: D10448025
fbshipit-source-id: 0ddfefd46
Summary: Even though we recognize the lock/unlock methods of various classes in C++, to report we insist that the class must have a `mutex` member. Equalize the two sets of types recognized.
Reviewed By: da319
Differential Revision: D10446527
fbshipit-source-id: f42ae1a35
Summary:
Use same code for deciding whether two accesses conflict across java/clang, by adapting that of the clang version.
Eliminate/simplify some code.
Reviewed By: mbouaziz, jberdine
Differential Revision: D10217383
fbshipit-source-id: dc0986d05
Summary:
An order constraint (A,B) means we take lock A and before releasing it we perform B (whatever that is).
Previously if a method call crossed class boundaries, we removed the callee's order constraints before integrating the callee's summary to that of the caller. The reasoning was that this may lead to reports blaming a caller for something they are very far from, plus a proliferation of reports with the same bad endpoint.
The first reason still applies, but this is a general problem. It may be better to report and let developers deal with it.
The second reason is moot, since in differential mode most of these reports are hidden.
Reviewed By: jberdine
Differential Revision: D10173200
fbshipit-source-id: 9afbf292c
Summary:
Make distinct reports on strict mode violations.
For now, restrict to direct violations (UI threads calls transitively a violating method).
Will assess impact and enable indirect reports later (via locks).
Reviewed By: mbouaziz
Differential Revision: D10126780
fbshipit-source-id: 9c75930bc
Summary: Option is not needed, just set `default` record to agree with function default arguments.
Reviewed By: da319
Differential Revision: D10050463
fbshipit-source-id: e7d13bbd5
Summary:
The 2nd iteration of analysis of the Android core implementation did not yield actionable models, so delete those.
Turn on strict-mode reporting by default, when doing starvation analysis (which is disabled by default).
Reviewed By: jvillard
Differential Revision: D9991448
fbshipit-source-id: 67504591d
Summary: We may want to use these traces more generally, so put them into their own module.
Reviewed By: mbouaziz
Differential Revision: D10084404
fbshipit-source-id: 8f87c17f4
Summary:
The method matcher is now used sufficiently it warrants refactoring out into its own module.
Also, kill dev-android-strict-mode and leave starvation-strict-mode as the stronger option.
Reviewed By: jeremydubreil
Differential Revision: D9990753
fbshipit-source-id: 626a70a19
Summary: There may be several reasons why we think a method is on the UI thread. Choose to keep the shortest via join.
Reviewed By: jeremydubreil
Differential Revision: D9806944
fbshipit-source-id: 89d27456d
Summary: Sometimes it's very confusing to see why infer believes a method is running on the UI thread. Make a trace out of all the relevant info.
Reviewed By: mbouaziz
Differential Revision: D9781212
fbshipit-source-id: 6d018e400
Summary:
Turn off by default until mature enough.
Also rename the dev-strict-mode test dir to highlight the dev part.
Reviewed By: mbouaziz
Differential Revision: D9775571
fbshipit-source-id: c3a41bbdf
Summary:
First step in writing an analyzer that is meant to run only on Android core library implementation.
This will, when finished, compute the library entrypoints that may lead to a strict mode violation.
The normal analyzer will use those to statically flag strict mode violations in app code.
Strict Mode is an Android debug mode, where doing certain things (like disk read/write or network activity) on the UI thread will raise an exception. We want to statically catch these, as well as indirect versions (the UI thread takes a lock and another thread holding that lock calls a method that would be a strict mode violation).
Reviewed By: mbouaziz
Differential Revision: D9634407
fbshipit-source-id: c30bcedb3
Summary:
- changes the `Ondemand` callbacks to take the execution environment instead of a `get_proc_desc` function.
- removes all the cases passing `get_proc_desc` as parameter to use `Ondemand.get_proc_desc` instead.
Reviewed By: jvillard
Differential Revision: D9200583
fbshipit-source-id: d16c218b5
Summary: Treat calls to Thread.sleep as blocking, even when the timeouts are less than the ANR limit.
Reviewed By: da319
Differential Revision: D9027950
fbshipit-source-id: 001409896
Summary:
The current message is confusing when the current class is marked UIThread.
See picture attached to task.
Reviewed By: jeremydubreil
Differential Revision: D8996593
fbshipit-source-id: cf52ee5d6
Summary:
Guava subclasses Future in ways that make .get() calls safe from the UI thread.
Treat such methods as skip.
Reviewed By: jeremydubreil
Differential Revision: D9013475
fbshipit-source-id: 38373aa5f
Summary:
Litho uses an idiom as follows. `Component.Builder` has an abstract method `T getThis()` which is supposed to be implemented as `{return this;}`.
I believe the reason it's there is to have covariant return types in subclasses, though this doesn't really matter.
We don't do dynamic dispatch, so instead of summarising `getThis` as having a return ownership of `OwnedIf({ 0 })` we just return `Unowned`.
This is generating many false positives, which are really hard to debug.
Here I'm special-casing any abstract method whose return type is equal to that of it's only argument, to return conditional ownership.
Reviewed By: da319
Differential Revision: D8947992
fbshipit-source-id: 33c7e952d
Summary: `ownership_of_expr` is already doing some of the work in `propagate_return`. Also, split and move into abstract domain, where it belongs.
Reviewed By: jeremydubreil
Differential Revision: D8855257
fbshipit-source-id: 7756552d8
Summary:
Currently, some blocking calls are turning up too many false positives. Adjust severities by fix rate/preexisting numbers.
Also, restrict some calls to exact class, as opposed to superclasses.
Reviewed By: mbouaziz
Differential Revision: D8850599
fbshipit-source-id: 47543d04a
Summary:
Do no computation of stability abstract state if not explicitly requested via the command line flag.
Also, simplify the reporting.
Reviewed By: jeremydubreil
Differential Revision: D8614885
fbshipit-source-id: 25dd9de
Summary:
- Do not add actuals of a call as unstable.
- Replace access trie with simple set of paths, which is easier to debug/argue correct.
- Fix bug where a prefix path was searched, as opposed to a *proper* prefix.
- Restrict interface to the minimum so that alternative implementations are easier.
Reviewed By: ilyasergey
Differential Revision: D8573792
fbshipit-source-id: 4c4e174
Summary: C/C++ code can, in some cases, generate a large number of temporary (Sil) variables. Since we are already not reporting races on these, not recording them gives some perf back.
Reviewed By: mbouaziz, jvillard
Differential Revision: D8566999
fbshipit-source-id: 148ac46
Summary: Trying to convert a large int literal to an OCaml int raises an exception. The use case here actually needed a float anyway, so add an API for that.
Reviewed By: jeremydubreil
Differential Revision: D8550410
fbshipit-source-id: 382495b
Summary:
The execution environment is really just a cache. It happens to point to a
particular source file which is where the analysis was started from, but that
is not relevant, and in fact is confusing because it suggests that it is
somewhat tied to that file. In reality, exe_env caches information about any
procedure and source file encountered by the analysis.
This will make it easier to make further changes but I think it also brings a
bit more clarity to the code.
Reviewed By: jeremydubreil
Differential Revision: D8513735
fbshipit-source-id: f4b38ce
Summary: Code auto generated by annotation processors or by the compiler is creating non-actionable reports, so skip it for now.
Reviewed By: jeremydubreil
Differential Revision: D8395781
fbshipit-source-id: 9832814
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8395399
fbshipit-source-id: b4bb48c
Summary:
We need to report on non-private methods (the opposite even leads to FPs sometimes on deadlocks). To do this, the domain needs to change so that the interpretation of an order pair `a,b` is no longer "lock `a` is taken in the *current method* and held until lock `b` is taken". Instead the meaning is now "lock `a` is taken in some method *of the same class with the current method* and is held until `b` is taken".
These changes are quite drastic because the previous implementation optimised extensively around the previous use case.
Reviewed By: mbouaziz
Differential Revision: D8395351
fbshipit-source-id: a2bd22b
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8394978
fbshipit-source-id: 671ccb0
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8379328
fbshipit-source-id: bc33983
Summary: Deadlocks can be very noisy, so dedup reports on same line by showing only the one with the shortest trace and a count of the suppressed ones.
Reviewed By: mbouaziz
Differential Revision: D8351148
fbshipit-source-id: 8913db2
Summary: Introduce an annotation that forces the summary of a method to be free of blocking events, without suppressing other reports.
Reviewed By: jeremydubreil
Differential Revision: D8276787
fbshipit-source-id: be9eed8
Summary:
`make doc` will use `jbuilder` (which in turn uses `odoc`) to generate the
documentation for infer's modules. This is useful to browse the APIs of infer
and gives a more discoverable place to host more general documentation about
infer's internals.
Besides the actual plumbing necessary to generate the docs, this diff also
- Moves the various infer/src/*/README.md to index.mld files that make it to the generated docs
- Fixes some doc comments that would anger `ocamldoc`
Closes#435
Reviewed By: mbouaziz
Differential Revision: D8314572
fbshipit-source-id: 4a5c70e
Summary: Create mechanism for suppressing starvation reports. To do that, refactor and expose a Checkers function.
Reviewed By: mbouaziz
Differential Revision: D8259583
fbshipit-source-id: f5b5a63
Summary:
Use the component of the abstract state `events` to report. This set contains reachability facts about blocking calls and lock acquisitions.
The other component, `order`, contained pairs of a reachable event `e'` from an event option with the semantics that if the option is `None` then we have an element that now goes into `events`, and if the option is `Some e` then the element represents a lock acquired and a trace *from* `e` to `e'`
Now, `order` can be simplified to proper pairs of events, without the option.
Reviewed By: jvillard
Differential Revision: D8227665
fbshipit-source-id: e6f4dac
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary: To simplify things, have a separate set of simple trace->event elements. Currently this is not used for reporting, in preparation for another diff.
Reviewed By: mbouaziz
Differential Revision: D8203721
fbshipit-source-id: ecc8bae
Summary: In preparation for allowing unbalanced locking, we need the lock state in the summary.
Reviewed By: mbouaziz
Differential Revision: D8201932
fbshipit-source-id: 05a1b38
Summary: In preparation to change the underlying module structure so as to allow three-point traces (call-site, intermediate call-site and endpoint), rename modules to better reflect function plus use records vs pairs of pairs :P
Reviewed By: mbouaziz
Differential Revision: D8187369
fbshipit-source-id: ed3e4ac
Summary:
There can be multiple reports per line, especially when calling in a method which has itself multiple reports.
When reporting at the callsite, report only the issue with the highest severity (picked manually per type of event).
Deadlocks are not de-duplicated, as they are relatively rare and the info in mupltiple reports may be important.
Reviewed By: mbouaziz
Differential Revision: D8160940
fbshipit-source-id: ea6a5c0
Summary: Track and surface the reasons why a method is assessed to run on the UI thread.
Reviewed By: mbouaziz
Differential Revision: D8096099
fbshipit-source-id: 2403c6c
Summary:
The reported location was always the start of the enclosing procedure, which is wrong in many ways.
A nice side-effect is that some code can then be eliminated and Ondemand.analyze used, avoiding getting the procdescs in the process.
Reviewed By: jeremydubreil
Differential Revision: D8056306
fbshipit-source-id: 67c2c8d
Summary:
- Reorder modules in mli for readability.
- Match mli module order in the implementation.
- Move some functions that operate on domains from RacerD.ml to the domain file.
- Kill some module type invocation.
- Use standard module signatures.
Reviewed By: mbouaziz
Differential Revision: D8026386
fbshipit-source-id: ee2af22
Summary: Method overloading creates the potential for report duplication even though the reports are actually distinct. Make the report message unique by not using shortened method names.
Reviewed By: jeremydubreil
Differential Revision: D8005862
fbshipit-source-id: 53d8ea0
Summary: Follow C++ in having local variables owned plus silence reports on paths rooted on logical vars. We need both because when propagating ownership from right to left, the initial status of a temp var as owned is lost.
Reviewed By: sblackshear
Differential Revision: D7988575
fbshipit-source-id: 2e817d7
Summary: There was a bit of code and comments referring to potential soundness. Kill those.
Reviewed By: da319
Differential Revision: D8004256
fbshipit-source-id: c20b62a
Summary:
Preparing for bigger changes...
- Rename `payload` field to `payloads`
- Move `payload` type to `Payloads.t`
- `SummaryPayload`s only have to implement a change on `Payloads.t` rather than `Summary.t`
Reviewed By: sblackshear
Differential Revision: D7987211
fbshipit-source-id: c9d7a74
Summary:
The annotation UiThread can, and is, used on classes as opposed to just methods, so extend the modelling to account for this.
Also, consider the annotation hereditary.
Reviewed By: jeremydubreil
Differential Revision: D7910762
fbshipit-source-id: 0df2c81
Summary:
Attempt at a better naming scheme:
- `Specs.summary` are now `Summary.t`. The `Summary` module (replacing `Specs`) contains the summary of a procedure: the results of all the analyses, etc.
- `Summary.ml` is now `SummaryPayload.ml`. This concerns how each (AI) analysis extracts its payload from the master summary.
- Accordingly, checkers now define a `Payload` module where previously they defined a `Summary` module. The type is also cleaned up to use `t` instead of `payload`, etc.
- Cleaned up some names as a result, for instance `Specs.get_summary` -> `Summary.get`, etc.
Reviewed By: ngorogiannis
Differential Revision: D7935883
fbshipit-source-id: 1766545
Summary:
This is an attempt to make things more consistent, and maybe save some work
from the `Format` module in case flambda doesn't have our backs.
Reviewed By: jberdine
Differential Revision: D7775496
fbshipit-source-id: 59a6314
Summary:
Make the starvation checker enabled by default.
Add a deadlock issue type, distinct to starvation, which will be kept for UI thread starvation.
Add checks so that checker will do nothing on non-Java code.
Reviewed By: mbouaziz, ddino
Differential Revision: D7908381
fbshipit-source-id: 889f373
Summary: Calling Future.get from UI thread, or under a lock the UI thread may try to take has been associated with ANRs.
Reviewed By: ddino
Differential Revision: D7859296
fbshipit-source-id: b87bd94
Summary: Folly has a macro SYNCHRONIZED(..) {...} which boils down to the creation/destruction of a LockedPtr object, doing the locking/unlocking. Add support for that.
Reviewed By: sblackshear
Differential Revision: D7844847
fbshipit-source-id: c7a146d
Summary: std::lock allows for locking multiple lockable objects, while avoiding deadlock. This will fix some FPs in C++.
Reviewed By: da319
Differential Revision: D7844198
fbshipit-source-id: 2b7140a
Summary:
We had a semantics for ownership of prefix paths in mind (see comment), but it was enforced partially in the domain and partially in the transfer functions.
Moving all of the logic into the domain makes things much cleaner/shorter.
Reviewed By: ngorogiannis
Differential Revision: D7845981
fbshipit-source-id: 4a2da95
Summary:
This simplifies the frontends and backends in most cases. Before this diff,
returning `void` could be modelled either with a `None` return, or a dummy
return variable with type `Tvoid`. Now it's always the latter.
Reviewed By: sblackshear, dulmarod
Differential Revision: D7832938
fbshipit-source-id: 0a403d1
Summary:
Add warning 60 (unused module) to the list of fatal warnings. Whitelisting
modules at toplevel is tricky (see inline comments) but doable.
Reviewed By: mbouaziz
Differential Revision: D7790073
fbshipit-source-id: 6f591c4
Summary: Easy simplification now that we have a set of access snapshots.
Reviewed By: ngorogiannis
Differential Revision: D7754720
fbshipit-source-id: 91d0bd7
Summary:
Upgrade ocamlformat, and base which needs to be done in sync in order to build
ocamlformat, and the other deps can come for the ride.
Reviewed By: jvillard
Differential Revision: D7663537
fbshipit-source-id: 3e90970
Summary: We already suppress race reports if the field is marked in this way; makes sense to do the same thing for these reports.
Reviewed By: ngorogiannis
Differential Revision: D7589275
fbshipit-source-id: 8f0aeab
Summary:
Now that everything can run at the same time and we have preanalyses, it can be quite hard to read debug sessions.
Here come session names!
Depends on D7607336
Reviewed By: sblackshear
Differential Revision: D7607481
fbshipit-source-id: 676af86
Summary:
There's actually a nice separation between IR/, base/, istd/, and the rest of
infer, so they can be made into separate jbuilder libraries so that the
separation remains. This helps make sense of the infer codebase.
Also:
- move everything biabduction-related out of backend/ and into a new
biabduction/ directory. This clarifies the current situation where backend/
contains a mix of analysis-independent code (still there now), and
biabduction-specific code (moved to biabduction/).
- move everything from base/ that is not infer-specific into istd/, e.g. IList.ml
- kill unused `FbTraceCalls`
- A couple of files needed to move around to complete the separation of base/ and IR/
Reviewed By: mbouaziz
Differential Revision: D7381842
fbshipit-source-id: cd86dea
Summary:
We frequently want to treat such vars differently than true program variables.
Used in only one place now, but will be used in a successor.
Reviewed By: mbouaziz, jvillard
Differential Revision: D7067882
fbshipit-source-id: 90e0348
Summary: More preparation for extending HIL with dereference and address of. We need left hand side of the assignment to also include dereference and address of.
Reviewed By: sblackshear
Differential Revision: D6976150
fbshipit-source-id: 47d1d76