Summary:
The synthetic methods from `topl.Property` are now nonempty: they
simulate a nondeterministic automaton.
Reviewed By: jvillard
Differential Revision: D15668471
fbshipit-source-id: 050408283
Summary:
Instrument SIL according to TOPL properties. Roughly, the
instrumentation is a set of calls into procedures that simulate a
nondeterministic automaton. For now, those procedures are NOP dummies.
Reviewed By: jvillard
Differential Revision: D15063942
fbshipit-source-id: d22c2f6fa
Summary:
- Rename `invariantModels` to `purityModels`
- Track which arguments are modified in purity models. Before we were invalidating all arguments of impure modeled functions. Instead, now we only invalidate modified args given in the model. This should ideally result in more precision in the analysis.
- Add some more purity models for :`cast`, `new`, `new_array` and `Math.random`
Reviewed By: mbouaziz
Differential Revision: D15535332
fbshipit-source-id: 5395800d9
Summary:
Increases precision a bit. I didn't observe speed problems on what I tested. (But, who knows?)
Closes https://github.com/facebook/infer/pull/799
Reviewed By: jvillard
Differential Revision: D6284206
Pulled By: rgrig
fbshipit-source-id: 6f1e8631f
Summary: This diff substitutes symbolic values for unknown functions in proof obligations to top. The goal of the diff is to avoid generating too many number of proof obligations that cannot be concretized.
Reviewed By: ezgicicek
Differential Revision: D14537542
fbshipit-source-id: 7f8f3bb4b
Summary:
TOPL properties are essentially automata, which specify a bad pattern.
This commit is just a parser for them.
Reviewed By: jvillard
Differential Revision: D14477671
fbshipit-source-id: c38a8ef37
Summary:
Add support for GuardedBy: we deviate from the spec as follows:
- No warnings issued for any access within a private method, unless that method is called from a public method and the lock isn't held when the access occurs.
- Warnings are suppressed with the general RacerD mechanism, ie `ThreadSafe(enableChecks=false)`
- GuardedBy warnings override thread-safety violation warnings on the same access, because GuardedBy has a clearer and simpler contract.
Also, some simplifications, cleanups and perf improvements (eg avoid unreportable procs at the top level as opposed to on each of their accesses).
Reviewed By: jeremydubreil
Differential Revision: D14506161
fbshipit-source-id: b7d794051
Summary:
It assigns symbolic values for global variables in the load commands. However, it does not instantiate the symbols for the global variables yet, which will be addressed in another diff.
Depends on D14208643
Reviewed By: ezgicicek
Differential Revision: D14257619
fbshipit-source-id: f9113c8a3
Summary:
The Eradicate backend is reporting nullable type errors, that are not always necessarily leading to null pointer exceptions.
For example, the analysis is designed to be consistent with the Java type system and report on the following code:
String foo(boolean test) {
Object object = test ? new Object() : null;
if (test) {
return object.toString(); // the analysis reports here
}
}
even though the code will not crash.
In order to make this aspect clear, this diff renames the warnings `Null Method Call` and `Null Field Access` into `Nullable Dereference`
Reviewed By: ngorogiannis
Differential Revision: D14001979
fbshipit-source-id: ff1285283
Summary:
This diff adds a constant to the set of widening thresholds if the
constant is compared to an abstract value in condition expressions.
Each abstract value has its own set of thresholds.
Reviewed By: mbouaziz
Differential Revision: D14147150
fbshipit-source-id: ca0db34d4
Summary: Record where each symbol in a polynomial is coming from: either a loop, function call or a modeled call.
Reviewed By: mbouaziz
Differential Revision: D14047420
fbshipit-source-id: 56d0bd926
Summary: In SIL, Java's array member is a pointer to an array, while C++'s is the array itself. This diff differentiate them in evaluating abstract locations.
Reviewed By: ezgicicek, mbouaziz
Differential Revision: D14021451
fbshipit-source-id: 00f14fe3b
Summary:
- There is no need to use AI to compute a dot product: let's just fold over all nodes, but still do it in order (using the WTO) to report at the right place
- The previous version was computing a dot product on nodes for each node, which was quadratic, the new version is linear
- Report only once, the first time the threshold is reached (if in a loop, report at the loop head)
Reviewed By: ddino
Differential Revision: D14028171
fbshipit-source-id: b4a840c6e
Summary:
Get rid of false positive as in the test by modelling `Double`. Longer term we
should probably prevent biabduction from blocking the angelic analysis on
`Nullable` fields but that seems harder.
Reviewed By: jeremydubreil
Differential Revision: D14005228
fbshipit-source-id: 59ef2ed66
Summary: The Makefile was missing that target and making `make test-replace` at the root of the repo fail.
Reviewed By: ngorogiannis
Differential Revision: D13990483
fbshipit-source-id: 805b5d2a9
Summary:
This will allow to get the numerical results for Cost, Hoisting, Purity without the Inferbo issues.
For now, I still forced Inferbo issues for Cost and Purity to avoid lots of changes in tests, that will go away soon.
Reviewed By: ezgicicek, skcho
Differential Revision: D13826741
fbshipit-source-id: 796d1a50d
Summary: Publish solutions to the lab, and a Docker file and image to get started more quickly with infer hacking.
Reviewed By: mbouaziz
Differential Revision: D13648847
fbshipit-source-id: daf48ad03
Summary: This diff unset powloc and arrayblk values of p when assume(p==Null).
Reviewed By: mbouaziz, jvillard
Differential Revision: D13415366
fbshipit-source-id: a491a957f
Summary:
For abstract values representing one concrete value, create only one symbol instead of two.
Still create two symbols (lb, ub) for abstract values representing multiple concrete values (like array cells).
As a consequence, comparisons of symbolic values are more precise (we can even prove equality). I expect to remove a bunch of FPs.
Another consequence is the disappearance of `.lb` and `.ub` in many reports.
Reviewed By: skcho
Differential Revision: D13072084
fbshipit-source-id: 9bc0b9881
Summary:
It materializes symbolic values of function parameters on-demand. The on-demand materialization is triggered when finding a value from an abstract memory and joining/widening abstract memories.
Depends on D13294630
Main idea:
* Symbolic values are on-demand-ly generated by a symbol path and its type
* In order to avoid infinite generation of symbolic values, symbol paths are canonicalized by structure types and field names (which means they are abstracted to the same value). For example, in a linked list, a symbolic value `x->next->next` is canonicalized to `x->next` when the structures (`*x` and `*x->next`) have the same structure type and the same field name (`next`).
Changes from the previous code:
* `Symbol.t` does not include `id` and `pname` for distinguishing symbols. Now, all symbols are compared by `path:SymbolPath.partial` and `bound_end`.
* `SymbolTable` is no longer used, which was used for generating symbolic values with new `id`s.
Reviewed By: mbouaziz
Differential Revision: D13294635
fbshipit-source-id: fa422f084
Summary:
At function calls, it copies callee's values that are reachable from parameters.
Depends on D13231291
Reviewed By: mbouaziz
Differential Revision: D13231711
fbshipit-source-id: 1e8aed1c4
Summary:
For more deduplications of issues, this diff loosens the condition of
similar bounds. The previous condition of similar bounds was too
strict, so [0,0] and [0,+oo] were not similar.
Depends on D10851762
Reviewed By: mbouaziz
Differential Revision: D10866127
fbshipit-source-id: 4ba912a88
Summary:
This diff preserves values of offset and index separately, rather than
one value of their addition, because premature addition results in
imprecise FPs by the limited expressiveness of the domain.
Reviewed By: mbouaziz
Differential Revision: D10851393
fbshipit-source-id: 1685ead36
Summary: Reports will now be issued for the class loads of the methods specified by the option `--class-loads-roots`.
Reviewed By: jvillard
Differential Revision: D10466492
fbshipit-source-id: 91456d723
Summary:
It avoids checking integer overflow when it definitely cannot happen.
For example, it does not check integer overflow of addition when one
of parameters is a negative number, or underflow of subtraction when
its first parameter is a positive number.
Reviewed By: mbouaziz
Differential Revision: D10446161
fbshipit-source-id: b8c86e1b2
Summary: This diff changes pp of binary operation condition in order to avoid a `make test` failure. For the same `uint64_t` type, it is translated to `unsigned long long` in 64bit mac, but `unsigned long` in 64bit linux, which made a `make test` failure.
Reviewed By: mbouaziz
Differential Revision: D10459466
fbshipit-source-id: 449ab548e
Summary:
Use same code for deciding whether two accesses conflict across java/clang, by adapting that of the clang version.
Eliminate/simplify some code.
Reviewed By: mbouaziz, jberdine
Differential Revision: D10217383
fbshipit-source-id: dc0986d05
Summary:
Make distinct reports on strict mode violations.
For now, restrict to direct violations (UI threads calls transitively a violating method).
Will assess impact and enable indirect reports later (via locks).
Reviewed By: mbouaziz
Differential Revision: D10126780
fbshipit-source-id: 9c75930bc
Summary: Before this diff, the analysis would only lookup the attributes with the classname appearing in the instruction. However, it would fail to find those attributes for inherited and not overridden methods. With this diff, the attributes are now searched recursively in the super classes.
Reviewed By: mbouaziz
Differential Revision: D10007469
fbshipit-source-id: 77d721cba
Summary: This fixes some cases of false positives where the analysis will compare with the wrong overridden methods. This could later be improved with the possibility to do sub-typing comparison on the parameters.
Reviewed By: ngorogiannis
Differential Revision: D9985249
fbshipit-source-id: 7998d8619
Summary:
Keep `--analyzer` around for now for integrations that depend on it.
Also deprecate the `--infer-blacklist-path-regex`,
`--checkers-blacklist-path-regex`, etc. in favour of
`--report-blacklist-path-regex` which more accurately represents what these do
as of now.
Rely on the current subcommand instead of the analyzer where needed, as most of
the code already does.
Reviewed By: jeremydubreil
Differential Revision: D9942809
fbshipit-source-id: 9380e6036
Summary:
Goal of the stack: deprecate the `--analyzer` option in favour of turning
individual features on and off. This option is a mess: some of the options are
now subcommands (compile, capture), others are aliases (infer and checkers),
and they can all be replicated using some straightforward combination of other
options.
This diff: stop using `--analyzer` in tests. It's mostly `checkers` everywhere,
which is already the default. `linters` becomes `--no-capture --linters-only`.
`infer` is supposed to be `checkers` already. `crashcontext` is
`--crashcontext-only`.
Reviewed By: mbouaziz
Differential Revision: D9942689
fbshipit-source-id: 048281761
Summary: It is common on Android code to recycle the `View` object by nullifying them in the `onDestroy()` or `onDestroyView()` methods. In this case, the outer `Fragment` object structure is preserve while the inner `View` object are set to null for the garbage collect to release the memory. However, if the fields are only set to `null` in the `onDestroy*()` methods, those fields cannot be `null` during the active lifecycle of the `Fragment`, so it is not necessary to annotate those fields with `Nullable`.
Reviewed By: mbouaziz
Differential Revision: D10024458
fbshipit-source-id: b05e538d9
Summary:
The method matcher is now used sufficiently it warrants refactoring out into its own module.
Also, kill dev-android-strict-mode and leave starvation-strict-mode as the stronger option.
Reviewed By: jeremydubreil
Differential Revision: D9990753
fbshipit-source-id: 626a70a19
Summary: Always read the attributes from the attributes DB instead of trying to read the attributes from the analysis summaries
Reviewed By: mbouaziz
Differential Revision: D9845085
fbshipit-source-id: aef48e6bf
Summary: No longer report inconsistencies with the annotations with subtyping when the super class is in an external packages since those warnings are not necessarily accurate or actionable.
Reviewed By: ezgicicek
Differential Revision: D9845098
fbshipit-source-id: 1f2bcd739
Summary: Sometimes it's very confusing to see why infer believes a method is running on the UI thread. Make a trace out of all the relevant info.
Reviewed By: mbouaziz
Differential Revision: D9781212
fbshipit-source-id: 6d018e400
Summary:
Turn off by default until mature enough.
Also rename the dev-strict-mode test dir to highlight the dev part.
Reviewed By: mbouaziz
Differential Revision: D9775571
fbshipit-source-id: c3a41bbdf
Summary:
First step in writing an analyzer that is meant to run only on Android core library implementation.
This will, when finished, compute the library entrypoints that may lead to a strict mode violation.
The normal analyzer will use those to statically flag strict mode violations in app code.
Strict Mode is an Android debug mode, where doing certain things (like disk read/write or network activity) on the UI thread will raise an exception. We want to statically catch these, as well as indirect versions (the UI thread takes a lock and another thread holding that lock calls a method that would be a strict mode violation).
Reviewed By: mbouaziz
Differential Revision: D9634407
fbshipit-source-id: c30bcedb3
Summary:
Separate and rename error reporting functions that use the biabduction state.
No checkers should call these functions.
Reviewed By: da319
Differential Revision: D9633579
fbshipit-source-id: 884fcee66
Summary: The `procedure` field in the final report should use the non-ambiguous fully qualified name containing the Java package declaration and the list of parameter types.
Reviewed By: mbouaziz
Differential Revision: D9237522
fbshipit-source-id: e9b0ff664
Summary: Treat calls to Thread.sleep as blocking, even when the timeouts are less than the ANR limit.
Reviewed By: da319
Differential Revision: D9027950
fbshipit-source-id: 001409896
Summary:
Guava subclasses Future in ways that make .get() calls safe from the UI thread.
Treat such methods as skip.
Reviewed By: jeremydubreil
Differential Revision: D9013475
fbshipit-source-id: 38373aa5f
Summary:
This previous FP does not occur anymore, make sure it doesn't regress.
https://github.com/facebook/infer/issues/49
Reviewed By: dulmarod
Differential Revision: D8442842
fbshipit-source-id: b3fde1ad1
Summary:
Litho uses an idiom as follows. `Component.Builder` has an abstract method `T getThis()` which is supposed to be implemented as `{return this;}`.
I believe the reason it's there is to have covariant return types in subclasses, though this doesn't really matter.
We don't do dynamic dispatch, so instead of summarising `getThis` as having a return ownership of `OwnedIf({ 0 })` we just return `Unowned`.
This is generating many false positives, which are really hard to debug.
Here I'm special-casing any abstract method whose return type is equal to that of it's only argument, to return conditional ownership.
Reviewed By: da319
Differential Revision: D8947992
fbshipit-source-id: 33c7e952d
Summary:
Currently, some blocking calls are turning up too many false positives. Adjust severities by fix rate/preexisting numbers.
Also, restrict some calls to exact class, as opposed to superclasses.
Reviewed By: mbouaziz
Differential Revision: D8850599
fbshipit-source-id: 47543d04a
Summary:
- Do not add actuals of a call as unstable.
- Replace access trie with simple set of paths, which is easier to debug/argue correct.
- Fix bug where a prefix path was searched, as opposed to a *proper* prefix.
- Restrict interface to the minimum so that alternative implementations are easier.
Reviewed By: ilyasergey
Differential Revision: D8573792
fbshipit-source-id: 4c4e174
Summary: C/C++ code can, in some cases, generate a large number of temporary (Sil) variables. Since we are already not reporting races on these, not recording them gives some perf back.
Reviewed By: mbouaziz, jvillard
Differential Revision: D8566999
fbshipit-source-id: 148ac46
Summary: Trying to convert a large int literal to an OCaml int raises an exception. The use case here actually needed a float anyway, so add an API for that.
Reviewed By: jeremydubreil
Differential Revision: D8550410
fbshipit-source-id: 382495b
Summary:
I realized that control variable analysis was broken when we had multiple back-edges for the same loop. This is often the case when we have a switch statement combined with continue in a loop (see `test_switch` in `switch_continue.c`) or when we have disjunctive guards in do-while loops.
This diff fixes that by
- defining a loop by its loophead (the target of its backedges) rather than its back-edges. Then it converts back-edge list to a map from loop_head to sources of the loop's back-edges.
- collecting multiple guard nodes that come from potentially multiple exit nodes per loop head
In addition, it also removes the wrong assumption that an exit node belongs to a single loop head.
Reviewed By: mbouaziz
Differential Revision: D8398061
fbshipit-source-id: abaf288
Summary:
We need to report on non-private methods (the opposite even leads to FPs sometimes on deadlocks). To do this, the domain needs to change so that the interpretation of an order pair `a,b` is no longer "lock `a` is taken in the *current method* and held until lock `b` is taken". Instead the meaning is now "lock `a` is taken in some method *of the same class with the current method* and is held until `b` is taken".
These changes are quite drastic because the previous implementation optimised extensively around the previous use case.
Reviewed By: mbouaziz
Differential Revision: D8395351
fbshipit-source-id: a2bd22b
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8394978
fbshipit-source-id: 671ccb0
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8379328
fbshipit-source-id: bc33983
Summary: Deadlocks can be very noisy, so dedup reports on same line by showing only the one with the shortest trace and a count of the suppressed ones.
Reviewed By: mbouaziz
Differential Revision: D8351148
fbshipit-source-id: 8913db2
Summary: Introduce an annotation that forces the summary of a method to be free of blocking events, without suppressing other reports.
Reviewed By: jeremydubreil
Differential Revision: D8276787
fbshipit-source-id: be9eed8
Summary: Create mechanism for suppressing starvation reports. To do that, refactor and expose a Checkers function.
Reviewed By: mbouaziz
Differential Revision: D8259583
fbshipit-source-id: f5b5a63
Summary:
Use the component of the abstract state `events` to report. This set contains reachability facts about blocking calls and lock acquisitions.
The other component, `order`, contained pairs of a reachable event `e'` from an event option with the semantics that if the option is `None` then we have an element that now goes into `events`, and if the option is `Some e` then the element represents a lock acquired and a trace *from* `e` to `e'`
Now, `order` can be simplified to proper pairs of events, without the option.
Reviewed By: jvillard
Differential Revision: D8227665
fbshipit-source-id: e6f4dac
Summary:
It's useful to test that the bucket a given error is classified as doesn't
change over time without notice.
This records the bucket for *all* the tests, even though some never produce a
bucket. This is to be on the safe size instead of risking to forget adding the
bucket information when the test changes, or when copy/pasting from a test that
doesn't have buckets to one that does.
The implementation is pretty crude: it greps the beginning of the qualifier
string for a `[bucket]`.
Reviewed By: mbouaziz
Differential Revision: D8236393
fbshipit-source-id: b3b1eb9
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
There can be multiple reports per line, especially when calling in a method which has itself multiple reports.
When reporting at the callsite, report only the issue with the highest severity (picked manually per type of event).
Deadlocks are not de-duplicated, as they are relatively rare and the info in mupltiple reports may be important.
Reviewed By: mbouaziz
Differential Revision: D8160940
fbshipit-source-id: ea6a5c0
Summary: Track and surface the reasons why a method is assessed to run on the UI thread.
Reviewed By: mbouaziz
Differential Revision: D8096099
fbshipit-source-id: 2403c6c
Summary:
The reported location was always the start of the enclosing procedure, which is wrong in many ways.
A nice side-effect is that some code can then be eliminated and Ondemand.analyze used, avoiding getting the procdescs in the process.
Reviewed By: jeremydubreil
Differential Revision: D8056306
fbshipit-source-id: 67c2c8d
Summary:
Before we were computing the size of an abstract state (`range`) using the `NonNegativeBound` domain but it wasn't able to express product of symbolic values.
This diff introduces a domain for that.
The range of an interval is still computed in `NonNegativeBound` but then the product is done in `TopLiftedPolynomial` so all costs end up being of that type.
The //symbols// of a polynomial are `NonNegativeBound` (so the polynomial only represent non-negative values, perfect for a cost), which handles substitution correctly, i.e. it gives zero instead of negative values.
Reviewed By: ddino
Differential Revision: D7397229
fbshipit-source-id: 6868bb7
Summary:
The annotation UiThread can, and is, used on classes as opposed to just methods, so extend the modelling to account for this.
Also, consider the annotation hereditary.
Reviewed By: jeremydubreil
Differential Revision: D7910762
fbshipit-source-id: 0df2c81
Summary: Without the class name, it is not always clear from the error message where the method expecing non-null parameters defined.
Reviewed By: mbouaziz
Differential Revision: D7919492
fbshipit-source-id: 044fb83
Summary:
Make the starvation checker enabled by default.
Add a deadlock issue type, distinct to starvation, which will be kept for UI thread starvation.
Add checks so that checker will do nothing on non-Java code.
Reviewed By: mbouaziz, ddino
Differential Revision: D7908381
fbshipit-source-id: 889f373
Summary: Calling Future.get from UI thread, or under a lock the UI thread may try to take has been associated with ANRs.
Reviewed By: ddino
Differential Revision: D7859296
fbshipit-source-id: b87bd94
Summary:
This simplifies the frontends and backends in most cases. Before this diff,
returning `void` could be modelled either with a `None` return, or a dummy
return variable with type `Tvoid`. Now it's always the latter.
Reviewed By: sblackshear, dulmarod
Differential Revision: D7832938
fbshipit-source-id: 0a403d1
Summary:
The abstract interpreter tried to handle exceptional control-flow by propagating the *pre* of a block that threw an exception rather than the *post*.
This was a half-measure that isn't correct when an exception-throwing instruction isn't in the middle of a block.
The handling of exceptions wasn't actually used anywhere and was leading to further hacks in `ProcCfg`, so let's get rid of it.
Reviewed By: mbouaziz, jvillard
Differential Revision: D7843872
fbshipit-source-id: 2a4a815
Summary: We already suppress race reports if the field is marked in this way; makes sense to do the same thing for these reports.
Reviewed By: ngorogiannis
Differential Revision: D7589275
fbshipit-source-id: 8f0aeab
Summary:
Report nullable inconsistencies by relying on the bytecode, and not on the presence of analysis summary on disk.
This use the `--external-java-packages` to avoid reporting inconsistencies outside of the codebase.
Reviewed By: sblackshear
Differential Revision: D7481101
fbshipit-source-id: 281135d
Summary: This was causing false positives when returning the constant integer 0.
Reviewed By: sblackshear
Differential Revision: D7330143
fbshipit-source-id: 45d19dd
Summary:
At the moment, Java and Clang sources/sinks live in the same inferconfig entry.
If we try to parse a Java procedure that happens to be an invalid Clang qualified name (e.g., `MyClass.<init>`),
parsing will crash.
As a temporary fix, throw an exception and catch it instead.
In the future, we can avoid this by requiring that JSON source/sink specifications to indicate the language.
Reviewed By: mbouaziz
Differential Revision: D7291880
fbshipit-source-id: f8f4502
Summary: Add a new command-line option `--external-java-packages` which allows the user to specify a list of Java package prefixes for external packages. Then the analysis will not report non-actionable warnings on those packages (e.g., inconsistent `Nullable` annotations in external packages).
Reviewed By: jeremydubreil
Differential Revision: D7126960
fbshipit-source-id: c4f3c7c
Summary:
See comment--`Prop(resType = blah) myProp` will generate `.myProp`, `.myPropRes`, and `.myPropAttr`, and any of them can be used to set the prop.
Because our annotation parameter parsing is a bit primitive, handle this by simply checking the `Res` and `Attr` suffixes for every `Prop`.
This shouldn't lead to false negatives because these methods will only exist if the `resType` annotation is specified anyway.
Reviewed By: jeremydubreil
Differential Revision: D6955362
fbshipit-source-id: ec59b21
Summary:
The boolean lock domain is simple and surprisingly effective.
But it's starting to cause false positives in the case where locks are nested.
Releasing the inner lock also releases the outer lock.
This diff introduces a new locks domain: a map of locks (access paths) to a bounded count representing an underapproximation of the number of times the lock has been acquired.
For now, we just use a single dummy access path to represent all locks (and thus a count actually would have been sufficiently expressive; we don't need the map yet).
But I'm planning to remove this limitation in a follow-up by refactoring the lock models to give us an access path.
Knowing the names of locks could be useful for error messages and suggesting fixes.
Reviewed By: jberdine
Differential Revision: D6182006
fbshipit-source-id: 6624971
Summary:
Previously, we could understand than an access was safe either because it was possibly owned or protected by a thread/lock, but not both. If an access was both protected by a lock and rooted in a paramer (i.e., possibly owned), we would forget the ownership part of the precondition and remember only the lock bit. This leads to false positives in cases where an access protected by a lock is owned, but another unowned access to the same memory is not protected by a lock (see the new `unownedLockedWriteOk` E2E test for an example).
This diff makes access safety conditions disjunctive so we can simultaneously track whether an access is owned and whether an access is protected by a thread/lock. This will fix false positives like the one explained in T24015160.
Reviewed By: jberdine
Differential Revision: D6671489
fbshipit-source-id: d17715f
Summary:
We already knew not to warn when non-resource `Closeable`'s like `ByteArrayOutputStream` weren't closed, but we still warned on their subtypes.
This diff fixes that problem by checking subclasses in the frontend.
This also removes the need for Java source code models of non-resource types, so I removed them.
Reviewed By: jeremydubreil
Differential Revision: D6843413
fbshipit-source-id: 60fe7fb
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary:
This lets us fix the limitation of reporting false positives when a `private` function calls `build()` on a parameter without passing all of the required props.
We will now report such issues in the caller only if it fails to pass the required props.
An unfortunate consequence of this change is that we lose track of where the actual call to `build` occurs--we now report on the declaration of the caller function rather than on the call site of `build`.
I'll work on addressing that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6764153
fbshipit-source-id: 3b173e5
Summary: At each call to `Component$Builder.build()`, checks that the required props for `Component` have been set via prior calls to the `Builder`. Does not yet handle `Prop(optional = true)`, but will address that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6735524
fbshipit-source-id: 0c812fd
Summary:
In Java, static variables are distinguished by package/class:
the file where they are defined doesn't matter.
Fixes#831.
Closes https://github.com/facebook/infer/pull/833
Reviewed By: jeremydubreil
Differential Revision: D6661240
Pulled By: sblackshear
fbshipit-source-id: beeb2f9
Summary: There was a back and forth conversion between `string` and `IssueType.t` which was not necessary.
Reviewed By: sblackshear
Differential Revision: D6562747
fbshipit-source-id: 70b57a2
Summary: This will avoid collisions when the inner classes are implementing the same methods. For example, the previous version of the bug hash could conflate the issues when several annonymous inner classes are implementing the same method, e.g. a annonymous subclass of `Runnable` implementing `run()`.
Reviewed By: sblackshear
Differential Revision: D6461594
fbshipit-source-id: 2bb8545
Summary:
Simpler bug hash that is more independent of the underlying analysis. This now computes the hash based on:
- the bug type.
- the base filename: i.e for my/source/File.java, just keep File.java. So the hash will not change when moving files around.
- the simple method name: i.e. without package information and list of parameters. So changing the list of parameters will not affect the bug hash.
- the error message were the line numbers have been removed. So moving code or reformatting will not affect the hash.
Reviewed By: jberdine
Differential Revision: D6445639
fbshipit-source-id: 82e3cbe
Summary: The clang compiler introduces a materialized temporary expression which should be treated similarly to the Infer internal temporary variables.
Reviewed By: sblackshear
Differential Revision: D6331237
fbshipit-source-id: 81d8196
Summary: This only works for Java at the moment but we can re-organise the code later to add the Objective C equivalent of these assertion methods.
Reviewed By: mbouaziz
Differential Revision: D6230588
fbshipit-source-id: 46ee98e
Summary: The Java bytecode does not contain information about the location of abstract of interface methods. Before this diff, the analysis trace was tuncated and the file where the abstract or interface method was not included in the trace, which makes it harder to understand the Infer report, especially when the method is on a generated file that is not checked in the repository.
Reviewed By: sblackshear
Differential Revision: D6223612
fbshipit-source-id: c80c6f2
Summary: More general version of the fix in D6138749. This diff moves RacerD's lock modeling into a separate module and uses the module in the HIL translation to check when a function has lock/unlock semantics.
Reviewed By: jberdine, da319
Differential Revision: D6191886
fbshipit-source-id: 6e1fdc3
Summary:
In a summary, you never want to see a trace where non-footprint sources flow to a sink.
Such a trace is useless because nothing the caller does can make more data flow into that sink.
Reviewed By: jeremydubreil
Differential Revision: D5779983
fbshipit-source-id: d06778a
Summary:
If you write
```
boolean readUnderLockOk() {
synchronized (mLock) {
return mField;
}
}
```
it will be turned into
```
lock()
irvar0 = mField
unlock()
return irvar0
```
in the bytecode. Since HIL eliminates reads/writes to temporaries, it will make the above code appear to perform a read of `mField` outside of the lock.
This diff fixes the problem by forcing HIL to perform all pending reads/writes before you exit a critical section.
Reviewed By: jberdine
Differential Revision: D6138749
fbshipit-source-id: e8ad9a0
Summary: This check is deprecated and will be replaced by a dedicated checker to detect unitialized values.
Reviewed By: mbouaziz
Differential Revision: D6133108
fbshipit-source-id: 1c0e9ac
Summary: In preparation for making `-a checkers` the default (when no analyzer is specified), let's test `-a checkers` by default.
Reviewed By: mbouaziz
Differential Revision: D6051177
fbshipit-source-id: d8ef611
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
Whenever we see a use of a lock, infer that the current method can run in a multithreaded context. But only report when there's a write under a lock that can be read or written without synchronization elsewhere.
For now, we only infer this based on the direct usage of a lock; we don't assume a caller runs in a multithreaded context just because its (transitive) callee can.
We can work on that trickier case later, and we can work on smarter inference that takes reads under sync into account. But for now, warning on unprotected writes of reads that occur under sync appears to be too noisy.
Reviewed By: jberdine
Differential Revision: D5918801
fbshipit-source-id: 2450cf2
Summary:
This was a crutch from the days before ownership analysis.
We shouldn't need it anymore, and it was actually causing FP's because we were skipping analysis of `ImmutableList.builder()` and not understanding that the return value is owned.
Reviewed By: jeremydubreil
Differential Revision: D6035631
fbshipit-source-id: afa0ade
Summary:
This generates `--resource-leak-only` automatically, and make the other
checkers' `-only` option work as expected with respect to `--resource-leak` too
(eg, `--resource-leak --biabduction-only` disables resource leak).
Reviewed By: jeremydubreil
Differential Revision: D6051134
fbshipit-source-id: 2d4a2ba
Summary:
1. Mark some Makefile targets as depending on `MAKEFILE_LIST` so they get rebuilt on Makefile changes
2. Do not show boolean options with no documentation in the man pages (like we do for other option types).
3. Default to Lazy dynamic dispatch for the checkers.
4. In the tests, use `--<checker>-only` instead of relying on `--no-default-checkers`
5. `--no-filtering` is redundant if `--debug-exceptions` is passed
Reviewed By: jeremydubreil
Differential Revision: D6030578
fbshipit-source-id: 3320f0a
Summary: We will then be able to merge the tests for the other checkers without affecting these lab tests
Reviewed By: jvillard
Differential Revision: D6039433
fbshipit-source-id: e575ce9
Summary:
Another step toward running the biabduction analysis as a checker.
Depends on D6038210
Reviewed By: jvillard
Differential Revision: D6038682
fbshipit-source-id: fed45bf
Summary: Now that we report write-write races involving more than one write, we need to improve the traces accordingly.
Reviewed By: jberdine
Differential Revision: D6026845
fbshipit-source-id: b1366dd
Summary:
Previously, annotating something ThreadSafe meant "check that it is safe to run all of this procedure's methods in parallel with each other" (including self-parallelization).
This makes sense, but it means that if the user writes no annotations, we do no checking.
I'm moving toward a model of inferring when an access might happen on a thread that can run concurrently with other threads, then automatically checking that it is thread-safe w.r.t to all other accesses to the same memory (on or off the current thread thread).
This will let us report even when there are no `ThreadSafe` annotations.
Any method that is known to run on a new thread (e.g., `Runnable.run`) will be modeled as running on a thread that can run in parallel with other threads, and so will any method that is `synchronized` or acquires a lock.
In this setup, adding `ThreadSafe` to a method just means: "assume that the current method can run in parallel with any thread, including another thread that includes a different invocation of the same method (a self race) unless you see evidence to the contrary" (e.g., calling `assertMainThread` or annotating with `UiThread`).
The key step in this diff is changing the threads domain to abstract *what threads the current thread may run in parallel with* rather than *what the current thread* is. This makes things much simpler.
Reviewed By: jberdine
Differential Revision: D5895242
fbshipit-source-id: 2e23d1e
Summary:
Indicate if read or write is protected, and do not print only the
field but also the object involved in the race.
Reviewed By: sblackshear
Differential Revision: D5974250
fbshipit-source-id: 351a576
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Summary: Infer can then detect the resource leak when resources are stored into a container
Reviewed By: sblackshear
Differential Revision: D5887702
fbshipit-source-id: 6106cfb
Summary: The point of the tracing mode is to compute all the possible path leading to an error state. However, within a method, many of those paths are not feasibile in practice. This leads to many false alarms for the resource leak analysis.
Reviewed By: sblackshear
Differential Revision: D5888695
fbshipit-source-id: 2dbc57b
Summary: Model the `remove(...)` and the `clear()` method of `HashMap`.
Reviewed By: sblackshear
Differential Revision: D5887674
fbshipit-source-id: c3f40ee
Summary: Handling the utility functions for asserting that we're on background thread.
Reviewed By: jberdine
Differential Revision: D5863435
fbshipit-source-id: 3ad95b5
Summary:
Previously, we just tracked a boolean representing whether we were possibly on the main thread (true) or definitely not on the main thread (false).
In order to start supporting `Thread.start`, `Runnable.run`, etc., we'll need something more expressive.
This diff introduces a lattice:
```
Any
/ \
Main Background
\ /
Unknown
```
as the new threads domain. The initial value is `Unknown`, and we introduce `Main` in situations where we would have introduced `true` before.
This (mostly) preserves behavior: the main difference is that before code like
```
if (*) {
assertMainThread()
} else {
x.f = ...
}
```
would have recorded that the access to `x.f` was on the main thread, whereas now we'll say that it's on an unknown thread.
Reviewed By: peterogithub
Differential Revision: D5860256
fbshipit-source-id: efee330
Summary:
It's useful to be able to disable de-duplication on the command line with `--no-filtering`.
Gate de-duplication with `Config.filtering` and move the de-duplication tests to a new directory under the build systems tests.
Reviewed By: jeremydubreil
Differential Revision: D5865329
fbshipit-source-id: 5094f5b
Summary:
Since D5381239, infer is careful not to delete directories that do not "look
like" results directories on startup, in case the user passed, eg, `-o /`.
In our repo, lots of results dir are created by build/test of infer, and when
the version of infer changes and the expected contents of results directories
change then it might start refusing to delete the results directories created
with another version of infer.
Add an option to force infer to delete the results directory no matter how
dodgy it looks, and use it in our repo by adding the option in every
.inferconfig.
Reviewed By: mbouaziz
Differential Revision: D5870984
fbshipit-source-id: 09412de
Summary:
Sort the complete set of warnings by everything except procname, then de-duplicate.
This scheme prevents reporting identical error messages on the same line/same file.
This is important for avoiding duplicate reports on multiple instantiations of the same template.
Reviewed By: jberdine
Differential Revision: D5819467
fbshipit-source-id: 984f47f
Summary: The resolution was previously only happening for constructors, but calls to private methods or to `super` are also neither static calls nor virtual calls. In this case, the resolution logic should be the same as for constructors.
Reviewed By: sblackshear
Differential Revision: D5830376
fbshipit-source-id: 9b56f80
Summary: With this diff, the analysis trace will jump to the definition of the skipped methods when the location is known. This is especially useful when the analysis is relying on the method annotations.
Reviewed By: sblackshear
Differential Revision: D5783428
fbshipit-source-id: 561b739
Summary: The list of fields of a Java object in SIL is the list of fields declared in the class plus all the fields declared in the the super classes. It turns out that we were missing the fields declared in the implemented interfaces.
Reviewed By: sblackshear
Differential Revision: D5720386
fbshipit-source-id: d65c9de
Summary: With this, we can now get now get inter-procedural issues involving native methods.
Reviewed By: sblackshear
Differential Revision: D5730638
fbshipit-source-id: 3bdbdbd
Summary: This makes the traces more readable when involving skipped functions.
Reviewed By: sblackshear
Differential Revision: D5731683
fbshipit-source-id: 49d363b
Summary:
A function can both be a sink and propagate source info, but we currently ignore the summary for any function that is also a sink.
This will cause us to under-report for (e.g.) `src1 = source(); src2 = strcpy(dest, src1); exec(src2)`.
This is both a potential buffer overflow and a potential shell injection, but we won't report the second issue.
Reviewed By: jberdine
Differential Revision: D5676167
fbshipit-source-id: 232ab2f
Summary: This check is not possible in Java as it natirally happens in the totally legit case of the `try ... finally`.
Reviewed By: sblackshear
Differential Revision: D5568802
fbshipit-source-id: 24ca074
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
We previously lumped ownership predicates in with all other predicates. That limited us to a flat ownership domain.
This diff separates out the ownership predicates so we can have a richer lattice of predicates with each access path.
This lets us be more precise; for example, we can now show that
```
needToOwnBothParams(Obj o1, Obj o2) {
Obj alias;
if (*) { alias = o1; } else { alias = o2; }
alias.f = ... // both o1 and o2 need to be owned for this to be safe
}
void ownBothParamsOk() {
needToOwnBothParams(new Obj(), new Obj()); // ok, would have complained before
}
```
is safe.
Reviewed By: jberdine
Differential Revision: D5589898
fbshipit-source-id: 9606a46
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
When a sink name is specified in `.inferconfig` or in OCaml, it might conflict with a function of the same name that has a different number of args.
We shouldn't try to create a sink in this case, and we definitely shouldn't crash.
Reviewed By: jeremydubreil
Differential Revision: D5561216
fbshipit-source-id: fa1859b
Summary: Those are not particularly relevant for the biabduction analysis. It would be easy to have a dedicated checker for this if we happen to need one day.
Reviewed By: sblackshear
Differential Revision: D5530834
fbshipit-source-id: 316e60f
Summary:
The Eradicate `Nullable` checker should now be run using:
infer -a checkers --eradicate ...
Reviewed By: mbouaziz
Differential Revision: D5529226
fbshipit-source-id: 0de2956
Summary:
This is unsound but will help the analysis to report less false alarms with the common pattern:
if (a.get() != null) {
a.get().foo();
}
Reviewed By: sblackshear
Differential Revision: D5528227
fbshipit-source-id: 750db4a
Summary: This was reusing the side effects of the `add_constraints_on_retval` for the final purpose of being angelic and just assigning a fresh value to the lhs of the load.
Reviewed By: sblackshear
Differential Revision: D5507037
fbshipit-source-id: ec1c89c
Summary:
Works the same way as read/write races on fields, except that are more relaxed (er, unsound) in deciding whether two containers may alias.
This is needed to avoid reporting a ton of FP's; full explanation in comments.
Reviewed By: da319
Differential Revision: D5493404
fbshipit-source-id: 0a5d8b1
Summary:
The way we represented container writes before was pretty hacky: just use a dummy field for the name of the method that performs the container write.
This diff introduces a new access kind for container writes that is much more structured.
This will make it easier to soundly handle aliasing between containers and support container reads in the near future.
Reviewed By: da319
Differential Revision: D5465747
fbshipit-source-id: e021ec2
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary: We get the wrong answer on most of them for now, but that is expected
Reviewed By: ngorogiannis
Differential Revision: D5429242
fbshipit-source-id: 4899079
Summary:
This just makes the warnings silent for now. We may improve the analysis to check if the null check on the captured fields are consistent with the annotation on the corresponding parameters.
Eradicate also has the same issue. I added a test to outline this. The biabduction analysis will also probably fail on the same of annotation lookup. We may want implement the proper fix at the level of `Annotation.field_has_annot`.
Reviewed By: sblackshear
Differential Revision: D5419243
fbshipit-source-id: 6460de8
Summary: Adding to the Quandary tests, the list of tests that are already working for the bi-abduction based taint analysis.
Reviewed By: sblackshear
Differential Revision: D5395734
fbshipit-source-id: c4f2e79
Summary: We had a model for `Pools.SimplePool`, but were missing models for `Pools.Pool`. Since `SimplePool` and `SynchronizedPool` both extend `Pool`, modeling it should cover all of the cases.
Reviewed By: ngorogiannis
Differential Revision: D5236280
fbshipit-source-id: 9bbdb25
Summary:
:
No longer use deprecated reporting function for the suggest nullable checker
Depends on D5205009
Reviewed By: grievejia
Differential Revision: D5205843
fbshipit-source-id: f6dd059
Summary:
Read/write race errors should always show one trace for a read and one trace for a write.
We forget to pass the conflicting writes to the reporting function in one case, which prevented us from showing a well-formed trace.
Fixed it by making the `conflicts` parameter non-optional
Reviewed By: jberdine
Differential Revision: D5209332
fbshipit-source-id: 05da01a
Summary: We were almost always using `~report_reachable:true`, and in the cases where we weren't it is fine to do so. In general, a sink could read any state from its parameters, so it makes sense to complain if anything reachable from them is tainted.
Reviewed By: mbouaziz
Differential Revision: D5169067
fbshipit-source-id: ea7d659
Summary:
For now, we just support clearing the taint on a return value.
Ideally, we would associate a kind with the sanitizer and only clear taint that matches that kind.
However, it's fairly complicated to make that work properly with footprint sources.
I have some ideas about how to do it with passthroughs instead, but let's just do the simple thing for now.
Reviewed By: jeremydubreil
Differential Revision: D5141906
fbshipit-source-id: a5b8b5e
Summary: Using Conjunction for thread join has known false negatives. Finer grained recording of threading information fixes this.
Reviewed By: sblackshear
Differential Revision: D5111161
fbshipit-source-id: aab483c
Summary: This fixes a couple of false positives as objects of BufferedReader don't need to be closed if the wrapped reader resource gets closed correctly.
Reviewed By: sblackshear
Differential Revision: D5106596
fbshipit-source-id: 725fb80
Summary: Useful to have Eradicate and Biabduction agree on how to inform that the analysis that some objects are not null.
Reviewed By: sblackshear
Differential Revision: D5075127
fbshipit-source-id: 9e56981
Summary:
First step to be able to enable and disable the checkers to run in the following form:
> infer -a checkers --checker1 --checker2 --checker3 -- ...
and have a predefined list of checkers that are run by default with:
> infer -a checkers -- ...
Reviewed By: sblackshear
Differential Revision: D5007377
fbshipit-source-id: d7339ef
Summary:
Before we understood ownership, we needed this to avoid a mountain of Builder-related FP's.
Now that we have fairly sophisticated understanding of ownership, we can kill this hack.
Reviewed By: jaegs
Differential Revision: D4940238
fbshipit-source-id: 8d86e57
Summary: The purpose of the annotation reachability analysis is to report when a method annotated with `X` never calls, directly or indirectly, another method annotated with `Y`. However, there can be different call stacks following different execution paths from `X` to `Y`. Reporting more than one call stack ending with the same annotated procedure does not bring more signal to the end user. So the purpose of this diff is to avoid those duplicated reports and report at most one annotation reachability issue per end of call stack.
Reviewed By: sblackshear
Differential Revision: D4942765
fbshipit-source-id: 46325a7
Summary: Sawja assigns them on multiple control-flow paths, so they're not SSA.
Reviewed By: peterogithub
Differential Revision: D4896745
fbshipit-source-id: c805216
Summary:
There are false positives in the current analysis due to the
use of conjunction in the treatment of threaded. Changing conjunction to disjunction
removes these false positives. Some new false negatives arise, but all the old tests pass.
This is a stopgap towards a better solution being planned.
Reviewed By: sblackshear
Differential Revision: D4883280
fbshipit-source-id: c2a7e6e
Summary:
If we couldn't project the callee access path into the caller during summary application, we still added the corresponding trace to the caller state.
This was wasteful; it just bloats the caller with state it will never look at.
Fixed it by making `get_caller_ap_node` return `None` when the state won't be visible in the caller.
Reviewed By: jeremydubreil
Differential Revision: D4727937
fbshipit-source-id: 87665e9
Summary: This should make the reports much easier to understand. We can generalize to reporting a stack trace for all of the writes in the future if we wish.
Reviewed By: peterogithub
Differential Revision: D4845641
fbshipit-source-id: 589fdbc
Summary: If two public methods touch the same state and only one is marked `ThreadSafe`, it's reasonable to report unsafe accesses on both of them.
Reviewed By: peterogithub
Differential Revision: D4785038
fbshipit-source-id: 5a80da4
Summary:
*Unless* the unprotected write runs on the main thread and the read doesn't.
Otherwise, we'll already report on the unprotected write, and we don't want to duplicate.
Reviewed By: peterogithub
Differential Revision: D4798357
fbshipit-source-id: 5de06a0
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary:
Adds a new type and branching for a missing path of execution.
closes#575
Reviewed By: jvillard
Differential Revision: D4738681
fbshipit-source-id: f72344c
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
No new functionality here; mostly `FN_` tests documenting our current limitations.
Will start chipping away at the false negatives in follow-up diffs.
Reviewed By: peterogithub
Differential Revision: D4780013
fbshipit-source-id: 7a0c821
Summary: Bringing the logic back to where it was before the big refactoring of the reporting logic.
Reviewed By: peterogithub
Differential Revision: D4774541
fbshipit-source-id: afeaaf8
Summary:
Move all of the reporting on top of the aggregation functionality.
This lets us delete lots of code
Reviewed By: peterogithub
Differential Revision: D4772223
fbshipit-source-id: 47cc51a
Summary:
This was the one type of races we were not yet reporting (besides ones that use the wrong synchronization :)).
Wrote new utility function to aggregate all accesses by the memory they access.
This makes it easy to say which accesses we should report and what their conflicts are.
Eventually, we can simplify the reporting of other kinds of unsafe accesses using this structure.
Reviewed By: peterogithub
Differential Revision: D4770542
fbshipit-source-id: 96d948e
Summary:
For collections whose type does not express that the collection is thread-safe (e.g., `Collections.syncrhonizedMap` and friends).
If you annotate a field holding one of these collections, we won't warn when you mutate the collection.
Reviewed By: jeremydubreil
Differential Revision: D4763565
fbshipit-source-id: 58b487a
Summary: It seems that we were not really using the `Bottom` part of the domain as a pair of (empty call map, empty tracking var map) was already acting as bottom.
Reviewed By: sblackshear
Differential Revision: D4759757
fbshipit-source-id: 53dedfe
Summary:
Most of our tests work by comparing the output of some command to a baseline
expected output. It's often needed to update that baseline.
Previously, that was crudely done by attempting to move every foo.exp.test file
to foo.exp. This does not work terribly well, in particular because
foo.exp.test might be stale.
Instead, add a `replace` target to every test that knows how to update the
baseline. This allows custom behaviours too, eg in the differential tests.
Most of the tests include base.make or differential.make, so add a replace target
there. A few tests are completely custom, add a replace target to them too.
Reviewed By: jeremydubreil
Differential Revision: D4754279
fbshipit-source-id: ec34273
Summary:
If I read off the main thread and write on the main we
could have a race. (Writes off main are already reported.)
Reviewed By: sblackshear
Differential Revision: D4746138
fbshipit-source-id: 8b6e9c5
Summary:
One limitation of Eradicate is that certain nullability patterns are not expressible using simply the `Nullable` annotation.
One such pattern is using the knowledge that a function returns null when passed null, but returns an object otherwise.
The annotation `PropagatesNullable` is a variant of `Nullable` applied to parameters when their value propagates to the return value.
A method annotated
```
B m(PropagatesNullable A x) { return x == null ? x : B(x); }
```
indicates that `m` returns null if `x` is null, or an object of class `B` if the argument is not null.
Examples with multiple parameters are in the test cases.
This diff builds some infrastructure for annotation transformers: the example above represents the identity function on nullability annotations.
Reviewed By: jvillard
Differential Revision: D4705938
fbshipit-source-id: 9f6194e
Summary:
Before, `trace_of_pname` only grabbed unprotected writes from the summary, so the traces ending in an unprotected read were truncated.
We now look at reads too when appropriate.
Reviewed By: peterogithub
Differential Revision: D4719740
fbshipit-source-id: 28f6e63
Summary: Now, running `infer -a checkers -- ...` will also run the ThreadSafety checker
Reviewed By: sblackshear
Differential Revision: D4691330
fbshipit-source-id: 04fc781
Summary: Run all the checkers one after each other, which allows the Infer AI framework to run several checkers together, including the possibility for them to collaborate.
Reviewed By: sblackshear
Differential Revision: D4621838
fbshipit-source-id: e264d67
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
When both an unprotected write and a read/write race emanate from the same line,
undoubtedly because of interprocedurality, strip the read/write report (for now).
Perhaps report the info in more succinct form later, but keep to one report/line.
Reviewed By: sblackshear
Differential Revision: D4685102
fbshipit-source-id: 291cf20
Summary:
There was a bug where we allowed ourselves to project local variables from the callee summary into an access path in the caller.
We should only be able to project callee variables that are in the footprint.
Reviewed By: jeremydubreil
Differential Revision: D4684868
fbshipit-source-id: 53a2b9d
Summary:
Eradicate detects circular field initializations (e.g. a field initialized with itself)
by checking in the typestate at the end of the constructor whether the origin
of the field is a field name in the current class.
This has the problem that the following initialization pattern is not recognized as correct:
C(C x) { this.field = x.field }
To fix the issue, the origin information for field accesses x.f is extended
with the origin information of the inner object x.
Circularities are detected if the origin of x is "this".
Reviewed By: jberdine
Differential Revision: D4672472
fbshipit-source-id: 9277bdd
Summary: Previously, we wouldn't report races where the write was under synchronization.
Reviewed By: peterogithub
Differential Revision: D4658850
fbshipit-source-id: e9f4c41
Summary: I encountered cases where the class name part of the method name was passed as `(None, "package.Class")` instead of `("package", "Class")` and therefore incorrectly failing some inequality checks
Reviewed By: sblackshear
Differential Revision: D4662617
fbshipit-source-id: 98ee3e3
Summary:
Stop multiple reports per line happening. These come about
because of interprocedural access to multiple fields. Present one trace,
and summary information about other accesses.
Reviewed By: sblackshear
Differential Revision: D4636232
fbshipit-source-id: 9039fea
Summary:
All intermediate `.exp` files used for tests can be generated with custom info, based on what is needed for the tests purposes.
This customisation happens via command-line argument `--issues-fields`.
Reviewed By: cristianoc, jvillard
Differential Revision: D4628062
fbshipit-source-id: feaa382
Summary:
- The package declaration was wrong
- There was a leftover copy-pasted resource leak test from `CursorLeak.java`.
Reviewed By: sblackshear
Differential Revision: D4612687
fbshipit-source-id: 42c1a35
Summary: Rather than having three separate annotations related to checking/assuming thread-safety, let's just have one annotation instead.
Reviewed By: peterogithub
Differential Revision: D4605258
fbshipit-source-id: 17c935b
Summary: distinguish writes via method calls (e.g., add) from writes via assignment in the error messages
Reviewed By: sblackshear
Differential Revision: D4611748
fbshipit-source-id: 7594d3b
Summary: Report at most one read/write race or unprotected write per access path per method
Reviewed By: sblackshear, jvillard
Differential Revision: D4590815
fbshipit-source-id: 3c3a9d9
Summary:
To address a common source of false positives observed in D4494901.
We don't do anything with `release` yet, but can model it as releasing ownership in the future if we want to enforce correct usage of `SynchronizedPool`'s.
Reviewed By: peterogithub
Differential Revision: D4593635
fbshipit-source-id: 621e937
Summary: Reports on reads that have one or more conflicting writes. When you report, say which other methods race with it.
Reviewed By: sblackshear
Differential Revision: D4538793
fbshipit-source-id: 47ce700
Summary: Thread-local variables can't be shared between threads, so it's safe to mutate them outside of synchronization
Reviewed By: jeremydubreil
Differential Revision: D4568316
fbshipit-source-id: 0634cad
Summary:
I couldn't figure out why, but from within an infer release the traces we get
for this test are different than the expected ones. This is even consistent
across osx and linux.
In order to restore sanity, let's just hide this incomprehensible fact. Let's
come back to it if more tests exhibit this, maybe traces are not guaranteed to
be exactly the same across runs.
Reviewed By: sblackshear
Differential Revision: D4559405
fbshipit-source-id: dd88c59
Summary: Should stop us from reporting on benign races of fields that are caching resources.
Reviewed By: peterogithub
Differential Revision: D4538037
fbshipit-source-id: 15236b4
Summary: This annotation can then be used to suppress the warnings on non-android Java projects.
Reviewed By: sblackshear
Differential Revision: D4544858
fbshipit-source-id: 8a0b8fa