Summary:
The infer results directories in buck-out/ are "cleaned up" to avoid polluting
the Buck cache with too much data or non-deterministic data. In particular, the
runstate is deleted, which confused subsequent infer processes trying to read
the pre-existing results directory.
Add a special case in infer to delete pre-existing results directories in
buck-out instead of trying to load their state.
Reviewed By: mbouaziz
Differential Revision: D6845128
fbshipit-source-id: 5c716aa
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary:
Not sure what an "iCFG" is but the dotty is only about CFGs anyway.
Diff obtained by mass-`sed`.
Reviewed By: sblackshear
Differential Revision: D6324280
fbshipit-source-id: b7603bb
Summary:
Record the db schema, infer version, and run dates into
infer-out/.infer_runstate.json. This allows us to check on startup whether the
results directory was generated using a compatible version of infer or not, and
give a better error message in the latter case than some SQLite error about
mismatching tables.
This will be used in a follow-up diff to record capture phases too, and avoid
relying on filesystem timestamps of the infer-out/capture/foo/ directories for
reactive analysis.
Had to change some tests Makefiles to make sure they do not attempt to re-use
stale infer-out directories, which would now fail the run.
The stale infer-out directory gets deleted if `--force-delete-results-dir` is
passed (but a warning still gets printed).
Reviewed By: mbouaziz
Differential Revision: D6760787
fbshipit-source-id: f36f7df
Summary:
In Java, static variables are distinguished by package/class:
the file where they are defined doesn't matter.
Fixes#831.
Closes https://github.com/facebook/infer/pull/833
Reviewed By: jeremydubreil
Differential Revision: D6661240
Pulled By: sblackshear
fbshipit-source-id: beeb2f9
Summary:
Some commands (mostly `infer report`) would attempt to run the initialisation
code of infer from the default results directory instead of the one used by the
test. This is mostly harmless because we do not actually use anything from the
directory (typically, we pass `--from-json-results foo.json` and only foo.json
matters). However, this can trip the initialisation code, eg on db schema
changes.
Reviewed By: mbouaziz
Differential Revision: D6711641
fbshipit-source-id: f04b4c7
Summary: This will avoid collisions when the inner classes are implementing the same methods. For example, the previous version of the bug hash could conflate the issues when several annonymous inner classes are implementing the same method, e.g. a annonymous subclass of `Runnable` implementing `run()`.
Reviewed By: sblackshear
Differential Revision: D6461594
fbshipit-source-id: 2bb8545
Summary:
It seems that the abstraction instructions were not previously added the the CFG.
This is a functional changes to make sure that the abstraction state is always added. We can simplify the code later and just run this step before storing the CFG instead of after loading them.
Reviewed By: sblackshear, jvillard
Differential Revision: D6383672
fbshipit-source-id: cedcb8a
Summary: This option was for compatibility with the command line options of the previous, but is no longer used. This diff removes the option and the deprecated code.
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6351097
fbshipit-source-id: 0e4cfc5
Summary:
This diff adds a new way of executing blocks when they are passed as parameters to a method. So far we just skipped the block in this case.
Now we can execute it. Let's demonstrate with an example. Say we have
//foo has a block parameter that it executes in its body
foo (Block block) { block();}
// bar calls foo with a concrete block
bar() {
foo (^(){
self->x = 10;
});
};
Now, when we call the method foo with a concrete block, we create a copy of foo instantiated with the concrete block, which in itself is translated as a method with a made-up name.
The copy of foo will get a name that is foo extended with the name of the block parameter, the call to the block parameter will be replaced to a call to the concrete block, and the captured variables
of the concrete block (self in this case), will be added to the formals of the specialized method foo_block_name.
This is turned on at the moment for ObjC methods with ObjC blocks as parameters, and called with concrete blocks. Later on we can extend it to other types of methods, and to C++ lambdas, that are handled similarly to blocks.
Another extension is to check when the block has been called with nil instead of an actual block, and raise an error in that case.
After this diff, we can also model various methods and functions from the standard library that take blocks as parameters, and remove frontend hacks to deal with that.
Reviewed By: ddino
Differential Revision: D6260792
fbshipit-source-id: 0b6f22e
Summary: The Java bytecode does not contain information about the location of abstract of interface methods. Before this diff, the analysis trace was tuncated and the file where the abstract or interface method was not included in the trace, which makes it harder to understand the Infer report, especially when the method is on a generated file that is not checked in the repository.
Reviewed By: sblackshear
Differential Revision: D6223612
fbshipit-source-id: c80c6f2
Summary:
Due to limitations in our Buck integration, the thread-safety analysis cannot create a trace that bottoms out in a Buck target that is not a direct dependency of the current target.
These truncated traces are confusing and tough to act on.
Until we can address these limitations, let's avoid reporting on truncated traces.
Reviewed By: jeremydubreil
Differential Revision: D5969840
fbshipit-source-id: 877b9de
Summary:
:
Make both buck capture and compilation database handle buck command line arguments and invoke buck query the same way.
Plus allow:
- target patterns `//some/dir:` and `//some/dir/...`. However since `//some/dir:#flavor` and `//some/dir/...#flavor` are not supported, they need to be expanded before adding the infer flavor.
- target aliases (defined in `.buckconfig`)
- shortcuts `//some/dir` rewritten to `//some/dir:dir`
- relative path `some/dir:name` rewritten to `//some/dir:name`
Reviewed By: jvillard
Differential Revision: D5321087
fbshipit-source-id: 48876d4
Summary:
This is in the spec for clang compilation databases.
Also improves error messages when we fail to parse the compilation database.
closes#771
Reviewed By: dulmarod
Differential Revision: D6123832
fbshipit-source-id: 070f70f
Summary: In preparation for making `-a checkers` the default (when no analyzer is specified), let's test `-a checkers` by default.
Reviewed By: mbouaziz
Differential Revision: D6051177
fbshipit-source-id: d8ef611
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
This adds more structure to the SQL schema backing attributes. With that, we
can transfer the logic for updating attributes in SQLite, instead of doing
optimistic concurrency in the client.
Reviewed By: jberdine
Differential Revision: D5891038
fbshipit-source-id: 6577ba2
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Summary:
With this change and the previous facebook-clang-plugins change, infer no
longer exhausts the biniou buffer when reading the serialized C++ AST.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5891081
fbshipit-source-id: cf48eac
Summary: Infer can then detect the resource leak when resources are stored into a container
Reviewed By: sblackshear
Differential Revision: D5887702
fbshipit-source-id: 6106cfb
Summary: Model the `remove(...)` and the `clear()` method of `HashMap`.
Reviewed By: sblackshear
Differential Revision: D5887674
fbshipit-source-id: c3f40ee
Summary:
It's useful to be able to disable de-duplication on the command line with `--no-filtering`.
Gate de-duplication with `Config.filtering` and move the de-duplication tests to a new directory under the build systems tests.
Reviewed By: jeremydubreil
Differential Revision: D5865329
fbshipit-source-id: 5094f5b
Summary:
Since D5381239, infer is careful not to delete directories that do not "look
like" results directories on startup, in case the user passed, eg, `-o /`.
In our repo, lots of results dir are created by build/test of infer, and when
the version of infer changes and the expected contents of results directories
change then it might start refusing to delete the results directories created
with another version of infer.
Add an option to force infer to delete the results directory no matter how
dodgy it looks, and use it in our repo by adding the option in every
.inferconfig.
Reviewed By: mbouaziz
Differential Revision: D5870984
fbshipit-source-id: 09412de
Summary:
We need to make sure that destructors of virtual base classes are called only once. Similarly to what clang does, we have two destructors for a class: a destructor wrapper and an inner destructor.
Destructor wrapper is called from outside, i.e., when variables go out of scope or when destructors of fields are being called.
Destructor wrappers have calls to inner destructors of all virtual base classes in the inheritance as their bodies.
Inner destructors have destructor bodies and calls to destructor wrappers of fields and inner destructors of non-virtual base classes.
Reviewed By: dulmarod
Differential Revision: D5834555
fbshipit-source-id: 51db238
Summary:
Simple instance of the problem: analyzing the following program times out.
```
#include <tuple>
void foo() {
std::tuple<std::tuple<int>> x;
}
```
Replacing `std::tuple<std::tuple<int>>` by `std::tuple<int>` makes the analysis
terminate.
In the AST, both tuple<tuple<int>> and tuple<int> have the same template
specialization type: "Pack" (which means we're supposed to go look into the
arguments of the template to get their values). This is not information enough
and that's the plugin fault.
On the backend side, this means that two types have the same Typ.Name.t, namely
"std::tuple<_>", so they collide in the tenv. The definition of
tuple<tuple<int>> is the one making it into the tenv. One of the fields of the
corresponding CxxRecord is of type "tuple<int>", which we see as the same
"tuple<_>", which causes the loop.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5775840
fbshipit-source-id: 0528604
Summary:
Sort the complete set of warnings by everything except procname, then de-duplicate.
This scheme prevents reporting identical error messages on the same line/same file.
This is important for avoiding duplicate reports on multiple instantiations of the same template.
Reviewed By: jberdine
Differential Revision: D5819467
fbshipit-source-id: 984f47f
Summary: The resolution was previously only happening for constructors, but calls to private methods or to `super` are also neither static calls nor virtual calls. In this case, the resolution logic should be the same as for constructors.
Reviewed By: sblackshear
Differential Revision: D5830376
fbshipit-source-id: 9b56f80