Summary:
The width of joins in the concurrency analysis is much wider, making
it worthwhile to use an n-ary version of join in order to avoid
repeated formula simplifiaction.
Differential Revision: D29441154
fbshipit-source-id: ae17de37b
Summary:
The formatting of sugared list syntax regressed with
https://github.com/ocaml-ppx/ocamlformat/pull/1567.
Reviewed By: ngorogiannis
Differential Revision: D28907812
fbshipit-source-id: 16ad68218
Summary:
Add a mode which executes randomly-chosen paths depth-first, without
duplicating the work of executing shared prefixes. This mode is to be
used when hoping to get lucky and quickly choose a path that exhibits
a bug, but is slower to achieve coverage than the default.
Differential Revision: D27996963
fbshipit-source-id: 20a7a32c5
Summary:
The configuration options for the analysis are used only/principally
in Control, they do not belong in the interface of domains. Also, the
definition of the used_globals type for the results of the used
globals pre-analysis belongs to the Domain_used_globals module.
Reviewed By: jvillard
Differential Revision: D27828752
fbshipit-source-id: e42de74e0
Summary: Preparation for allowing a choice among several scheduler strategies.
Reviewed By: jvillard
Differential Revision: D27828759
fbshipit-source-id: 63d6ec203
Summary:
The only domain with a partial join is the lifting of a predicate
domain to a relation one, where the entry states are required to be
equal. This situation now indicates a programming error in the
analysis, rather than something that the domain should be responsible
for. Therefore this diff changes that check to an assertion and
simplifies the remaining join operations which are all total.
Reviewed By: jvillard
Differential Revision: D27828763
fbshipit-source-id: ec52ff741
Summary:
Specifying that sledge should stop execution when the first report is
made via e.g. `sledge l a -t Stop` currently only works when debug
tracing is enabled. This diff fixes this so that `-t Stop` also works
for the release build.
Reviewed By: jvillard
Differential Revision: D27828753
fbshipit-source-id: dd7511ff1
Summary:
Currently all alarms are reported as "Invalid memory access", which is
not accurate for `abort` and hence assertion violations. This diff
adds an explicit type for alarms which distinguishes these two
cases. Further refinement is left for later.
Reviewed By: jvillard
Differential Revision: D27828754
fbshipit-source-id: 9c33f3c86
Summary:
It is desirable to programmatically enable backtrace printing in debug
mode, but in other modes it should not forcably disabled. For example,
after this diff, executing
```
$ OCAMLRUNPARAM=b sledge.trc ...
```
now prints a backtrace if an unhandled exception is raised.
Reviewed By: ngorogiannis
Differential Revision: D27564883
fbshipit-source-id: 66ea5efe2
Summary:
There are not too many cases where the function name is not enough to
disambiguate a trace message, but it is still perhaps more
approachable to include the module names as well.
Reviewed By: jvillard
Differential Revision: D27396914
fbshipit-source-id: ea4c8b44f
Summary:
This is a form of call only used with inline asm, so currently not
supported.
Reviewed By: jvillard
Differential Revision: D27280742
fbshipit-source-id: f286e7886
Summary:
This allows using the upsteam LLVM 11 library unchanged, only
extensions to the OCaml bindings are needed. Therefore this is to
enable building sledge using e.g. `dnf install llvm-11` or `brew
install llvm@11` instead of cloning and building a fork of llvm.
Reviewed By: jvillard
Differential Revision: D27188301
fbshipit-source-id: f441dbecd
Summary:
They only attach debug info to labels, and have no execution
behavior. At some later point it would be good to scan for these and
gather the attached debug info.
Reviewed By: jvillard
Differential Revision: D27262516
fbshipit-source-id: 2eb91a475
Summary:
This warning (68) triggers when a function argument pattern depends on
mutable state, which prevents the remaining arguments from being
uncurried, causing additional closure allocations.
Reviewed By: jvillard
Differential Revision: D27188311
fbshipit-source-id: a43354e15
Summary:
Not all types of exceptions allowed by LLVM are currently
supported. The types of Resume args and LandingPad params must be
compatible, and so it only makes sense to check they the same
way.
Reviewed By: jvillard
Differential Revision: D27188307
fbshipit-source-id: c88cc46d0
Summary:
This script interoperates with the gllvm wrapper for clang that embeds
bitcode into native object files to support linking closed bitcode for
executables built with gllvm, also linking in the bitcode of needed
dynamic libraries.
Reviewed By: ngorogiannis
Differential Revision: D26903126
fbshipit-source-id: d4b95809a
Summary:
The only difference between `program` and `identified` variables is
terminology, technically they are redundant.
Reviewed By: jvillard
Differential Revision: D26451308
fbshipit-source-id: eb4e7be43
Summary:
It is not necessary to clear tables and sets that do not contain any
pointers to LLVM values.
Reviewed By: jvillard
Differential Revision: D26451306
fbshipit-source-id: 403c588fb
Summary:
The names of instructions that produce void results, other than Call
instructions, are not used. So do not consume ids for them.
There are actually very many of these, so the saved work during
translation can be significant.
Reviewed By: jvillard
Differential Revision: D26250529
fbshipit-source-id: f9eea5684
Summary:
The source block name is normally visible in the LLAIR code, while the
name of e.g. a branch instruction is some internal number. This change
only makes the output LLAIR code slightly easier to read.
Reviewed By: jvillard
Differential Revision: D26250521
fbshipit-source-id: 4723a58f7
Summary:
Sometimes symbols are added to the symbol table multiple times during
translation from LLVM to LLAIR. For example, this happens when a
`llvm.dbg.declare` instruction is encountered that attaches a debug
location to a symbol. Currently when this happens, the symbol name is
regenerated unnecessarily. This is not economical, and since counters
are used in some cases to avoid clashes, this can cause visible
changes to names.
This diff fixes this, and also makes the location update more robust
by not relying on the location added last being the best.
Reviewed By: jvillard
Differential Revision: D26250542
fbshipit-source-id: 5d52ce193
Summary:
Currently the symbolic execution options, obtained from the command
line flags and preanalysis, are passed to the Control entry points as
a record, and then passed around within Control as needed. This diff
simplifies the code in Control by replacing the record mechanism with
an additional functor parameter containing the options. The main
benefit is that the bound option no longer needs to be part of the
analysis state.
This change does make the code in Sledge_cli slightly more
complicated, as it now performs a functor application using a
first-class module computed from the command line flags.
Reviewed By: jvillard
Differential Revision: D25196735
fbshipit-source-id: 80e5d5d62
Summary:
Revise the control-flow exploration scheduling algorithm to fix
several issues. The main difference is to change the priority queue to
keep the control edges on the frontier of exploration in sync with the
states that are waiting to be propagated. This fixes several sorts of
issue where the decision of which control and state joins to perform
was unexpected / wrong. Part of keeping the frontier edges and waiting
states in sync is that the waiting states are associated not only with
a destination block, but the stack of that block. This fixes several
issues.
Combined, these changes lead to the algorithm only attempting joins
for which the pointwise max join on depth maps is correct (with the
caveat of no mathematical proof yet).
Reviewed By: jvillard
Differential Revision: D25196733
fbshipit-source-id: db007fe1f
Summary:
Currently there is a symbolic execution option to ignore exceptional
control flow. This hack does not fit well, and it is unclear how much
backend functionality should take it into consideration. This diff
removes this option and replaces it with an option during model
compilation. This has the advantage of clarifying and simplifying the
backend, with the disadvantage of no longer supporting switching
between exceptions and no-exceptions modes at analysis time. Since the
possibility of ignoring exceptional control flow is due to it not being
ready yet, this is a good trade to make.
Reviewed By: jvillard
Differential Revision: D25146148
fbshipit-source-id: 1f1299ee1
Summary:
Use the equality class information in the symbolic state to resolve
callees of indirect calls.
Reviewed By: jvillard
Differential Revision: D25146160
fbshipit-source-id: a1c39bbe1
Summary:
The callee function of a Call can often be resolved
statically. Currently this is resolution is only done dynamically
during symbolic execution by checking if the callee expression is a
function name and looking up the function in the program. This is
wasted and redundant work. Also, the static resolution code is
duplicated in all the domains.
This diff resolves this by resolving known callees statically at
translation time. This involves:
- add an ICall terminator that is the same as Call is currently
- change Call to use a func callee instead of Exp.t
- make callee field mutable since recursive calls can create cycles
- change the Llair.Term.call constructor to return a thunk to perform
the backpatching once the callee has been translated
- modify the Frontend
+ to determine whether to emit Call or ICall depending on whether
the callee in LLVM is already a Function
+ to record the LLVM function -- backpatch thunk pairs encountered during translation
+ record the mapping of LLVM to LLAIR functions during translation
+ to enumerate the calls to backpatch after all functions have been
translated, and find the LLAIR function corresponding to each LLVM
function and backpatch the call to use it as the callee
+ to handle direct calls to undefined functions, when backpatching
translate such function declarations into undefined functions
Reviewed By: jvillard
Differential Revision: D25146152
fbshipit-source-id: 47d2ca1ff
Summary:
Current code partially tries to handle Invoke, but incorrectly, and
these names are only needed for Call. So this diff revises this to be
slightly simpler and less confusing.
Reviewed By: jvillard
Differential Revision: D25146157
fbshipit-source-id: ead4f6f31
Summary: Rework the intrinsic name detection to detect e.g. llvm.memset.*
Reviewed By: jvillard
Differential Revision: D25146150
fbshipit-source-id: 85ebcfb7a
Josh Berdine