Summary:
Previously, annotating something ThreadSafe meant "check that it is safe to run all of this procedure's methods in parallel with each other" (including self-parallelization).
This makes sense, but it means that if the user writes no annotations, we do no checking.
I'm moving toward a model of inferring when an access might happen on a thread that can run concurrently with other threads, then automatically checking that it is thread-safe w.r.t to all other accesses to the same memory (on or off the current thread thread).
This will let us report even when there are no `ThreadSafe` annotations.
Any method that is known to run on a new thread (e.g., `Runnable.run`) will be modeled as running on a thread that can run in parallel with other threads, and so will any method that is `synchronized` or acquires a lock.
In this setup, adding `ThreadSafe` to a method just means: "assume that the current method can run in parallel with any thread, including another thread that includes a different invocation of the same method (a self race) unless you see evidence to the contrary" (e.g., calling `assertMainThread` or annotating with `UiThread`).
The key step in this diff is changing the threads domain to abstract *what threads the current thread may run in parallel with* rather than *what the current thread* is. This makes things much simpler.
Reviewed By: jberdine
Differential Revision: D5895242
fbshipit-source-id: 2e23d1e
Summary:
Indicate if read or write is protected, and do not print only the
field but also the object involved in the race.
Reviewed By: sblackshear
Differential Revision: D5974250
fbshipit-source-id: 351a576
Summary:
Expanding traces currently works in the following way:
Given a `TraceElem.Kind` `k` we want to report in `foo`, we look for a callee `C` of `foo` that has a `TraceElem.Kind` equal to `k` in its summary, grab the summary for `C`, then repeat until we bottom out.
This isn't very flexible: it insists on equality between `TraceElem.Kind`'s as the criteria for expanding a trace.
This diff introduces a new `matches` function for deciding when to expand a trace from a caller into a callee.
Clients that don't want strict equality can implement a fuzzier kind of equality inside this function.
I've gone ahead and done this for the trace elemes of thread-safety.
In the near future, equivalent access paths won't always compare equal from caller to callee, so we want to match their suffixes instead.
Reviewed By: jvillard
Differential Revision: D5914118
fbshipit-source-id: 233c603
Summary:
Move Inferbo safety conditions to their own file.
Split the old `Condition.t` to a condition together with a trace.
This will ease having: different kind of condition and several traces for the same condition (see following diff)
Reviewed By: jvillard
Differential Revision: D5942030
fbshipit-source-id: d74a612
Summary: Not using this for now, and it seems good to simplify the complex domain as much as we can.
Reviewed By: jberdine
Differential Revision: D5970233
fbshipit-source-id: a451503
Summary:
This is due to the changes in `facebook-clang-plugins` where objc_object_type_info now has a `field_prefix` set to `ooti_`
See 5f2042abe6 for the changes made to `facebook-clang-plugins`
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5963064
fbshipit-source-id: 9705774
Summary:
Running `infer report foo.specs` would overwrite report.json with an empty json.
Only recompute report.json when running `infer-analyze` or `infer-run`.
Reviewed By: mbouaziz
Differential Revision: D5963500
fbshipit-source-id: e579c6f
Summary:
Use a monotonic time source instead.
Also, sleep between retries in the Serialization code.
Reviewed By: jberdine
Differential Revision: D5941697
fbshipit-source-id: 05efbe1
Summary:
Despite what the sqlite manual says, it looks like it's possible for sqlite not
to remove the -shm and -wal files after a successful termination.
Close the database and clean them up in Buck mode so that they do not perturb
the cache.
Reviewed By: martinoluca
Differential Revision: D5953967
fbshipit-source-id: 9068b01
Summary:
Inject a marker using a global variable in <iostream>, and whitelist it so that
the frontend translates it.
Use the marker in the SIOF checker to tell whether a file includes <iostream>.
If so, start the analysis of its methods assuming that the standard streams are
initialised.
Reviewed By: sblackshear
Differential Revision: D5941343
fbshipit-source-id: 3388d55
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
Wrap ANSITerminal so that it doesn't apply control codes unless they can be
interpreted, and so that clients are unable to call ANSITerminal directly.
Reviewed By: mbouaziz
Differential Revision: D5953733
fbshipit-source-id: 6b3602a
Summary:
Bottom bounds do not make sense (what is the meaning of `[_|_; 1]`?), let's get rid of them.
`Bot` was useful for substitution though, with a special meaning, use `bottom_lifted` for that case.
Reviewed By: skcho
Differential Revision: D5941796
fbshipit-source-id: 5778255
Summary: A bottom interval in a safety condition doesn't make sense. Let's not allow it at all.
Reviewed By: skcho
Differential Revision: D5941552
fbshipit-source-id: 6bd2a65
Summary: If we know for sure we won't need to store an attribute in the DB, there's no need to compute its marshalled value.
Reviewed By: jberdine
Differential Revision: D5891050
fbshipit-source-id: cf4534e
Summary:
This adds more structure to the SQL schema backing attributes. With that, we
can transfer the logic for updating attributes in SQLite, instead of doing
optimistic concurrency in the client.
Reviewed By: jberdine
Differential Revision: D5891038
fbshipit-source-id: 6577ba2
Summary:
- use a similar key as for specs in the attributes table
- cache blob computations
- this improves memory usage a lot
Reviewed By: mbouaziz
Differential Revision: D5824177
fbshipit-source-id: c318577
Summary:
Preparing statements allocates memory and is generally best done once and for all.
We need to re-prepare statements when opening a new DB connexion (after each fork).
Reviewed By: mbouaziz
Differential Revision: D5824157
fbshipit-source-id: 4d239ac
Summary: Not sure if useful but seems sensible. It disappears at the top of the stack when we do merging in SQL.
Reviewed By: mbouaziz
Differential Revision: D5824131
fbshipit-source-id: fd64752
Summary: Use `pp` functions until it needs to be turned into a string.
Reviewed By: jvillard
Differential Revision: D5941473
fbshipit-source-id: 87ca9df
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary:
Its value is unused in Infer and is constantly emitted as None from facebook-clang-plugins, so it was also removed from facebook-clang-plugins (a96c39601f)
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5940900
fbshipit-source-id: e7fd6ae
Summary: Remove functions that are redundant with Base.List functions on sorted lists.
Reviewed By: mbouaziz
Differential Revision: D5931792
fbshipit-source-id: caec210
Summary: The case of closures was not considered for the convertion of SIL instructions into HIL instructions
Reviewed By: sblackshear
Differential Revision: D5929675
fbshipit-source-id: bb6920a
Summary: These folders are left empty when linting, so better not create them.
Reviewed By: jvillard
Differential Revision: D5921418
fbshipit-source-id: f6efc4f
Summary: The tests are slower when running in debug mode, and it creates a lot of html outputs
Reviewed By: sblackshear
Differential Revision: D5916511
fbshipit-source-id: 07c90b7
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Martino Luca
Sam Blackshear
Josh Berdine
Dulma Churchill
Mehdi Bouaziz
Jules Villard
Jeremy Dubreil
Dino Distefano