Summary:
Use the equality class information in the symbolic state to resolve
callees of indirect calls.
Reviewed By: jvillard
Differential Revision: D25146160
fbshipit-source-id: a1c39bbe1
Summary:
The callee function of a Call can often be resolved
statically. Currently this is resolution is only done dynamically
during symbolic execution by checking if the callee expression is a
function name and looking up the function in the program. This is
wasted and redundant work. Also, the static resolution code is
duplicated in all the domains.
This diff resolves this by resolving known callees statically at
translation time. This involves:
- add an ICall terminator that is the same as Call is currently
- change Call to use a func callee instead of Exp.t
- make callee field mutable since recursive calls can create cycles
- change the Llair.Term.call constructor to return a thunk to perform
the backpatching once the callee has been translated
- modify the Frontend
+ to determine whether to emit Call or ICall depending on whether
the callee in LLVM is already a Function
+ to record the LLVM function -- backpatch thunk pairs encountered during translation
+ record the mapping of LLVM to LLAIR functions during translation
+ to enumerate the calls to backpatch after all functions have been
translated, and find the LLAIR function corresponding to each LLVM
function and backpatch the call to use it as the callee
+ to handle direct calls to undefined functions, when backpatching
translate such function declarations into undefined functions
Reviewed By: jvillard
Differential Revision: D25146152
fbshipit-source-id: 47d2ca1ff
Summary:
Current code partially tries to handle Invoke, but incorrectly, and
these names are only needed for Call. So this diff revises this to be
slightly simpler and less confusing.
Reviewed By: jvillard
Differential Revision: D25146157
fbshipit-source-id: ead4f6f31
Summary: Rework the intrinsic name detection to detect e.g. llvm.memset.*
Reviewed By: jvillard
Differential Revision: D25146150
fbshipit-source-id: 85ebcfb7a
Summary:
Rename the existing exec_intrinsic that works for calls to intrinsic
functions to exec_intrinsic_func to make room for an exec_intrinsic
that works on intrinsic instructions.
Reviewed By: jvillard
Differential Revision: D25146166
fbshipit-source-id: 80ae3aac9
Summary:
The translation of instruction intrinsics that are `Invoke`d is almost
the same as those that are `Call`ed. The same Llair instruction is
produced, but it is wired into the CFG differently. This diff uses the
translation of instruction intrinsics used for `Call`s for `Invoke`s
as well.
Reviewed By: jvillard
Differential Revision: D25146159
fbshipit-source-id: 85a93d915
Summary:
The code that computes the number of actuals is largely duplicated
between the Call and Invoke cases. But some issues have been fixed in
each that ought to be applied to the other. This factors out and
unifies this computation.
Reviewed By: jvillard
Differential Revision: D25146149
fbshipit-source-id: 78552327a
Summary:
Move the translation of Calls to intrinsics that map to instructions
into a separat function.
No functional change.
Reviewed By: jvillard
Differential Revision: D25146169
fbshipit-source-id: 79c640344
Summary:
Currently intrinsics are treated as functions, with Call instructions
to possibly-undefined functions with known names. This diff adds an
Intrinsic instruction form to express these more directly and:
- avoid the overhead of intrinsics needing to end blocks
- avoid the overhead of the function call machiery
- avoid the complexity of doing the string name lookup to find their
specs, repeatedly
This diff only adds the backend support, the added Intrinsic
instructions are not yet generated by the frontend.
Reviewed By: jvillard
Differential Revision: D25146155
fbshipit-source-id: f24024183
Summary:
Previously, when LLAIR was in SSA form, blocks took parameters just
like functions, and it was sometimes necessary to partially apply a
block to some of the parameters. For example, blocks to which function
calls return would need to accept the return value as an argument, and
sometimes immediately jump to another block passing the rest of the
arguments as well. These "trampoline" blocks were partial applications
of the eventual block to all but the final, return value,
argument.
This partial application mechanism meant that function parameters and
arguments were represented as a stack, with the first argument at the
bottom, that is, in reverse order.
Now that LLAIR is free of SSA, this confusion is no longer needed, and
this diff changes the representation of function formal parameters and
actual arguments to be in the natural order. This also brings Call
instructions in line with Intrinsic instructions, which will make
changing the handling of intrinsics from Calls to Intrinsic less
error-prone.
Reviewed By: jvillard
Differential Revision: D25146163
fbshipit-source-id: d3ed07a45
Summary:
Overwritten variables in move instructions are not impossible. Since
Domain_itv does not handle them, the check should be a `todo` rather
than an `assert false`.
Reviewed By: jvillard
Differential Revision: D25146168
fbshipit-source-id: 13d8587c7
Summary:
It was possible for the scope of a local to be incorrectly restored
when entering it for the first time in a caller after is was shadowed
by a callee. This could happen because scope management in the
analysis relies on renaming variables to adjust the vocabulary of
symbolic states. This was usually done, but optimizations of renaming
with a substitution whose domain is disjoint from the vocabulary of a
formula inadvertantly violated this vocabulary-adjustment
assumption. (Yes, this is too easy to get wrong.)
Reviewed By: jvillard
Differential Revision: D25146162
fbshipit-source-id: 30f2d657f
Summary:
These are not simply handled by `@deriving` since:
- These types are recursive and so some fields need to be ignored
- Some are uniquely identified by one of their fields
- Some fields are mutable, but set only during construction, and need
to be considered by compare, equal, hash, but ppx_hash refuses.
Reviewed By: jvillard
Differential Revision: D24989064
fbshipit-source-id: 7f8d699e5
Summary:
The use of realpath on paths obtained from debug info and the current
working directory is application-usage-specific behavior that does not
belong in the backend library. This diff moves these uses to the
frontend and cli, respectively. Also, the use of realpath in the
frontend is memoized along the same lines as the other frontend
translation functions.
This was also the last use of `core` in the `sledge` library, so the
dependency is moved to `sledge_cli` and `sledge_report`.
Reviewed By: ngorogiannis
Differential Revision: D24989070
fbshipit-source-id: c21b275f5
Summary:
Currently __llair_choice is left undefined, and so executed as skip.
This has the correct behavior, but makes it hard to distinguish from
calls to unintentionally-undefined procedures.
Reviewed By: ngorogiannis
Differential Revision: D24989068
fbshipit-source-id: f62981857
Summary:
Use B/K/M/G/... units for memory quantities, round percentages to 2
decimal places, and robustly detect deltas of close to zero.
Reviewed By: ngorogiannis
Differential Revision: D24989063
fbshipit-source-id: 35f0bccfb
Summary:
Instructions that have multiple specs sometimes have inconsistent
footprints for one or more of their specifications. In such cases, the
handling of the existential and universal vocabularies was sometimes
incorrect before this diff. In particular, the ghosts of a spec need
not appear in the pure approximation of the footprint, which the
previous code incorrectly assumed. Also, the unit of disjunction is
`false` with an empty vocabulary, not the precondition's vocabulary as
the previous code incorrectly used.
Reviewed By: ngorogiannis
Differential Revision: D24989067
fbshipit-source-id: eca3bff55
Summary:
Change `-llair-output` to `-output`, for binary form, and
`-llair-txt-output` to `-llair-output`, for textual form. Also
correspondingly change `.llair` to `.bllair`, for binary, and
`.llair.txt` to `.llair` for text.
This improves command line argument completion, and makes `.llair` the
extension of the files most commonly interacted with.
Reviewed By: ngorogiannis
Differential Revision: D24951506
fbshipit-source-id: ad4c73ca2
Summary:
The `seq` name of this field refers to the expected sort of it's
value, where the others refer to the role they play. So rename
seq (for sequence) to cnt (for contents).
Reviewed By: ngorogiannis
Differential Revision: D24951507
fbshipit-source-id: fd6640517
Summary: It is too easy to mix up multiple arguments of the same type.
Reviewed By: jvillard
Differential Revision: D24934116
fbshipit-source-id: 6e595b26e
Summary:
Global constants have reliable types, and their sizes can be used
instead of storing the size of the initializer separately.
Reviewed By: jvillard
Differential Revision: D24934114
fbshipit-source-id: 2426ab5be
Summary:
In practice this has not been observed to matter so far, since
treating `Splat N` as interpreted or uninterpreted does not matter
when `N` is a literal constant, and code seen so far only uses `Splat`
for zero initializers or memset with literal constant bytes.
Reviewed By: jvillard
Differential Revision: D24934118
fbshipit-source-id: 213e9724e
Summary:
0 and Splat 0 need to be treated the same since code relies on knowing
that 0 consists of all-0 bytes, and extracting a subsequence of a
Splat 0 yields 0. For example, initializing a struct to all-zeros and
then reading a member of pointer type out of it needs to produce the
null pointer. Therefore 0 and Splat 0 are redundant representations,
and all uses of Splat need to be updated to also handle 0.
This unfortunately leads to some near code duplication that seems to
be necessary. The issue is that 0 and Splat 0 are, from the backend's
perspective, constants in two distinct theories. Since 0 is chosen
over Splat 0 as the representation, the sequence theory solver needs
to treat 0 as if it was Splat 0, which duplicates some code handling
the general Splat cases.
Reviewed By: jvillard
Differential Revision: D24920758
fbshipit-source-id: 7c02be62b
Summary:
Global variables and function names in LLAIR are constant and so do
not need to be handled like normal assignable or shadowable
variables. This diff does this by changing the translation from LLAIR
to FOL to map globals and functions to uninterpreted constants instead
of variables.
Reviewed By: jvillard
Differential Revision: D24886571
fbshipit-source-id: efb8c9f49
Summary:
Localizing the entry of a procedure needs the globals (that the
procedure uses), but later creating a summary does not.
Reviewed By: jvillard
Differential Revision: D24886570
fbshipit-source-id: 8a7b18c58
Summary:
The computation of provable reachability through the heap currently
uses a set of variables whose values are either determined by the
desired roots or by the heap constraints. This requires globals to be
treated as variables. In preparation for distinguishing globals from
variables, this diff changes the reachability computation to use a set
of atomic terms instead of variables.
Reviewed By: jvillard
Differential Revision: D24886573
fbshipit-source-id: c0e6763b6
Summary:
No functional change, only simplifiying and making easier to
generalize.
Reviewed By: jvillard
Differential Revision: D24886572
fbshipit-source-id: e487b815d
Summary:
The general xlate_value function can be used in place of
xlate_func_name.
Reviewed By: jvillard
Differential Revision: D24846677
fbshipit-source-id: 603ebd388
Summary:
Calling an inline asm function that might raise is not currently
supported.
Reviewed By: jvillard
Differential Revision: D24846675
fbshipit-source-id: a7cfe6050
Summary:
Mangled names start with _Z, so only demangle those names. This leaves
unmangled C names alone.
Reviewed By: jvillard
Differential Revision: D24846674
fbshipit-source-id: d239a61aa
Summary:
Distinguish expressions that name globals from registers. This leads
to clearer code, and globals are semantically distinct from general
registers. In particular, they are constant, so any machinery for
handling assignment does not need to consider them. This diff only
adds the distinction to LLAIR, it is not pushed through to FOL, which
will come later.
Reviewed By: jvillard
Differential Revision: D24846676
fbshipit-source-id: 3aca025bf
Summary:
This module represents the definition of a global constant, rather
than the global itself.
Reviewed By: jvillard
Differential Revision: D24846673
fbshipit-source-id: d47e67984
Summary:
Distinguish expressions that name functions from registers. This leads
to clearer code, and function names are semantically distinct from
general registers. In particular, they are constant, so any machinery
for handling assignment does not need to consider them. Unlike general
globals, they never have initializer expressions, and in particular
not recursive initializers. This diff only adds the distinction to
LLAIR, it is not pushed through to FOL, which will come later.
Reviewed By: jvillard
Differential Revision: D24846672
fbshipit-source-id: 2101f353f
Summary:
LLVM and Llair use a form of records, in particular for values of
constant structs and arrays. In Llair, these use standard `select` and
`update` operations a la McCarthy's theory of functional arrays, with
a compact `record` operation for constructing complete records. This
is fine and logically well-understood. The issue is that once
constructed, these values are accessed using instructions that (may)
operate over byte-ranges, rather than struct member indices. The
backend uses a theory of sequences to represent such values (the
contents of memory). So some code depends on high fidelity
interoperation between these two views.
This diff resolves this by removing the record theory from the backend
and instead encoding them using the sequence theory. The approach
taken keeps records in Llair and translates them to sequences in
Llair_to_Fol. This choice is made since the encoding into the sequence
theory involves terms that do not have types that are expressible in
terms of the source types. In particular, `(update r i e)`, is encoded
as the concatenation of the prefix of `r` up to the offset of index
`i`, followed by `e` (possibly with padding), and then the suffix of
`r` from index `i+1` on. The prefix and suffix sequences do not
necessarily have source-expressible types.
Reviewed By: jvillard
Differential Revision: D24800866
fbshipit-source-id: e7238c558
Summary:
The support for recursive references to globals from within their
initializers is enough to handle all the cases of recursive structs
that have been encountered so far. Therefore this diff removes the
complication of recursive records entirely.
Reviewed By: jvillard
Differential Revision: D24772955
fbshipit-source-id: f59f06257
Summary:
It happens so seldomly that it is not worth it to optimistically
assume that linking will make opaque types sized. In particular, it is
incongruent for `Typ.is_sized` to hold and then `Typ.size_of` to
raise.
Reviewed By: jvillard
Differential Revision: D24772956
fbshipit-source-id: 96a72a5cf
Summary:
This information is needed to mediate between index-based
operations (such as on records) and offset-based operations (such as
load/store). Since it is fragile to recompute, the approach here is to
query llvm during translation and store the result.
Reviewed By: jvillard
Differential Revision: D24772954
fbshipit-source-id: ad22c3ecf
Summary:
If these failures are observed in real code of interest, they will
need to be resolved, so they are `todo` rather than an internal
`fail`ure.
Reviewed By: jvillard
Differential Revision: D24746222
fbshipit-source-id: 6b924be58
Summary:
While vector types can be translated, vector operations are not
currently handled. Translating type can lead to later failures (such
as bogus Convert expressions) that are not clearly identifiable as
originating from vector types. So fail eagerly when a vector type is
seen. Note that the only vectors that the frontend sees are due to
incompleteness of the LLVM vectorizer pass.
Reviewed By: jvillard
Differential Revision: D24746224
fbshipit-source-id: 30c0715eb
Summary: Do not fail when resolving the realpath of a debug info path.
Reviewed By: jvillard
Differential Revision: D24746237
fbshipit-source-id: b9dc35176
Summary:
Applicative command line argument interpretation fail: using map
instead of compose meant that the type of the ignored arg was the
action function.
Reviewed By: jvillard
Differential Revision: D24746226
fbshipit-source-id: f1dd67067
Summary:
Change Arith.map to not descend through non-interpreted arithmetic
operators. For example, in `2×(x × y) + 3×z + 4`, `map ~f` will apply
`f` to the subterms `x × y` and `z`, but not `x` or `y`.
The logical notion of "subterm" that is needed by the solver does not
coincide with the representation. This is essentially due to not
"flattening" or "purifying" terms. That is, traditionally `x × y`
would not be permitted as an indeterminate of a polynomial. Instead, a
new variable would need to be introduced: `v = x × y` and then the
polynomial would be expressed as `2×v + 3×z + 4`. Taking maximal
non-interpreted subterms as the definition of "subterm" results in
subterms in the non-flattened representation that are equivalent to
those that would result from flattening the representation.
Reviewed By: jvillard
Differential Revision: D24746235
fbshipit-source-id: d8fcf46a1
Summary:
The implementation of Arithmetic relies on the partial projection from
terms to polynomials. This diff enables it to also embed polynomials
back into terms.
Reviewed By: jvillard
Differential Revision: D24746223
fbshipit-source-id: b6010e7b7
Summary:
Add a distinction between interpreted and uninterpreted arithmetic
terms, and use it in Context.classify. This enables correctly
classifying non-linear terms such as `x × y` as uninterpreted.
Reviewed By: ngorogiannis
Differential Revision: D24746228
fbshipit-source-id: 1a4b0e3bd
Summary:
It was possible for the scope of existentials to be violated. In
particular, before this diff the order of re-quantifying the
existentials and conjoining the non-eliminated equations from the
solution of solving for existentials was wrong.
Reviewed By: ngorogiannis
Differential Revision: D24746231
fbshipit-source-id: d96cc60a6
Summary:
In the process of computing `Context.solve`, fresh variables can be
generated. Not all of these end up in the final solution
substitution. Currently all of the freshly generated variables are
returned to the client, which leads to extraneous existentials. This
diff trims the returned fresh variables to only those that appear in
the final solution.
Reviewed By: ngorogiannis
Differential Revision: D24746241
fbshipit-source-id: 59a2f221b
Summary:
Since floats of any width are interpreted the same (as exact rationals
where possible and uninterpreted constants otherwise), this does not
introduce additional infidelity.
Reviewed By: da319
Differential Revision: D24746225
fbshipit-source-id: bc8e7bdb9
Summary:
Since non-integral address spaces are not currently supported anyhow,
this does not introduce additional infidelity.
Reviewed By: da319
Differential Revision: D24746234
fbshipit-source-id: 1f6887a78
Summary: Just to make the source and destination types of the conversion more clear.
Reviewed By: da319
Differential Revision: D24746239
fbshipit-source-id: 592c7d0f1
Summary:
Since Context treats only equality directly, formulas involving other
literals can normalize to false when the context is not unsat. This
diff changes Sh.star to check this case, and return the canonical
false symbolic heap.
Reviewed By: da319
Differential Revision: D24746227
fbshipit-source-id: 50a51b8a6
Summary:
- Treat missing baseline files as if empty
- Only filter unchanged results if a baseline file is given
- Minor optimization
- Sort multiple statuses
- Fix total computation
- List tests with failing statues first
- Do not use `Format.formatter_of_out_channel` since it sometimes does
not work for some unknown reason, e.g. when the output should have
only one line, none are emitted.
Reviewed By: da319
Differential Revision: D24746236
fbshipit-source-id: f4ead1531
Summary:
When exceptions are used due to the lack of goto, use `raise_notrace`
instead of `raise` to avoid the overhead of populating the backtrace.
Reviewed By: ngorogiannis
Differential Revision: D24630525
fbshipit-source-id: c5051d9c4
Summary:
Adding quotes is needed only to avoid clashes between LLVM integer
literals and anonmous value names.
Reviewed By: ngorogiannis
Differential Revision: D24630527
fbshipit-source-id: 97339740c
Summary:
The implementation in Context, in terms of Fol.Term and Fol.Formula,
can now be used instead of Ses.Equality, implemented using
Ses.Term. The Ses modules can now be removed.
Reviewed By: jvillard
Differential Revision: D24532362
fbshipit-source-id: cee9791b7
Summary:
Adapt the solver implementation from Ses.Equality to Context, and use
the interface of Fol.Context.
Reviewed By: jvillard
Differential Revision: D24532348
fbshipit-source-id: 2c6d41669
Josh Berdine