Summary: If we record all callees with empty summary, we end up with FPs. This diff instead only records leaf calls. for non-leaf calls, we just load the summary.
Reviewed By: skcho
Differential Revision: D26606228
fbshipit-source-id: 77e76ee9e
Summary: This diff finds a declared variable name or declared field names from trace, then constructs an error message including access paths.
Reviewed By: jvillard
Differential Revision: D26544275
fbshipit-source-id: 135c90a1b
Summary:
This diff makes the analysis inter-procedural.
* If a callee is called in a config check branch, it does nothing.
* if a callee is called outside config check branches,
* If callee's summary is empty, add the callee's name to the set of unchecked callees.
* If callee's summary is not empty, join the summary to the set of unchecked callees. (We intentionally don't add the callee's name here.)
Reviewed By: ezgicicek
Differential Revision: D26465235
fbshipit-source-id: ac3ad3543
Summary:
`add_edge_on_src` is to prepare a stack location for a local variable. Before this diff, it was
called several times for each fields.
Reviewed By: jvillard
Differential Revision: D26543715
fbshipit-source-id: 49ebf2b65
Summary:
The impurity checker assumed that in pulse summary, all key addresses of PRE state should exist in
POST state. However, the assumption is not always true. For example,
```
void foo(int x) {
int y = x;
// HERE
}
```
At `HERE`, pulse's summary is
```
POST={
roots={ &x=v1 };
mem ={ v1 -> { * -> v4 } };
}
PRE={
roots={ &x=v1 };
mem ={ v1 -> { * -> v4 },
v4 -> { } };
}
```
The `v4` entry exists only at `PRE`. Although the `v4` entry is luckily removed in the summary by
the canonicalization in this example, basically there is no guarantee about the entry sets of PRE and POST.
Reviewed By: jvillard
Differential Revision: D26550338
fbshipit-source-id: 99a31cd43
Summary:
The only difference between `program` and `identified` variables is
terminology, technically they are redundant.
Reviewed By: jvillard
Differential Revision: D26451308
fbshipit-source-id: eb4e7be43
Summary:
Negating the ids of program variables leads to inverting the order on
them. This is logically fine, the order is still a valid total order.
But it can lead to choosing younger variables as equality class
representatives over older variables, and thereby lead to more churn
as adding an equality is more likely to cause a change of
representative, and hence additional normalizing rewrites.
Reviewed By: jvillard
Differential Revision: D26451304
fbshipit-source-id: eb20d1901
Summary:
It is not necessary to clear tables and sets that do not contain any
pointers to LLVM values.
Reviewed By: jvillard
Differential Revision: D26451306
fbshipit-source-id: 403c588fb
Summary:
Theory.solved is a list of pairs of terms representing solved
equalities. The order of the pairs is very important, which is not
apparent from the type. This diff introduces an oriented_equality type
to make this more clear.
Reviewed By: jvillard
Differential Revision: D26451303
fbshipit-source-id: 56a49e601
Summary:
Generalize the existing find_or_add and find_and_remove operations to
find_update. Slightly simplify the interfaces of change, update,
find_or_add, and find_and_remove, reducing the gap to the natural
underlying functionality.
Reviewed By: jvillard
Differential Revision: D26451305
fbshipit-source-id: 89f67c84d
Summary:
The normalization and then extension of the carrier can be combined
into one pass. This weakens the property that this normalization needs
to achieve, which yields a small simplification, and combining the
passes is a minor optimization.
Reviewed By: jvillard
Differential Revision: D26400406
fbshipit-source-id: 8a3cbb2de
Summary:
An invariant of `And` and `Or` formulas is that they are flattened,
that is, `And` formulas do not have positive immediate subformulas of
form `And` nor negative immediate subformulas of form `Or`, and
similarly for `Or`. This invariant is ensured by the formula
constructors, which scan the immediate subformulas for cases that need
to be flattened.
When mapping over formulas, this repeated scanning is a performance
bottleneck. Most of the work of flattening is wasted since the input
formulas are necessarily already in flattened form, and the common
case is that the transformation preserves the flattened form. This
diff optimizes this case by detecting violations of flattening during
the transformation, performing the needed flattening, and avoiding the
general constructor that scans for flattening violations.
Reviewed By: jvillard
Differential Revision: D26338014
fbshipit-source-id: 9f15cca58
Summary:
Update the first-order equality solver for the sequence theory to
avoid searching the whole representation now that the super-term index
is maintained.
Reviewed By: jvillard
Differential Revision: D26338015
fbshipit-source-id: 24a9a19b6
Summary:
Similarly to terms, use the Comparar interface of Sets to defined
formulas using recursive types instead of recursive modules.
Reviewed By: jvillard
Differential Revision: D26250512
fbshipit-source-id: 84f0ae8c0
Summary: No functional change, just to make the interface easier to read
Reviewed By: jvillard
Differential Revision: D26250513
fbshipit-source-id: f3b07bccc
Summary:
Terms include Arithmetic terms, which are polynomials over terms
themselves. Monomials are represented as maps from
terms (multiplicative factors) to integers (their powers). Polynomials
are represented as maps from monomials (indeterminates) to
rationals (coefficients). In particular, terms are represented using
maps whose keys are terms themselves. This is currently implemented
using recursive modules.
This diff uses the Comparer-based interface of Maps to express this
cycle as recursive *types* rather than recursive *modules*, see the
very beginning of trm.ml. The rest of the changes are driven by the
need to expose the Arithmetic.t type at toplevel, outside the functor
that defines the arithmetic operations, and changes to stage the
definition of term and polynomial operations to remove unnecessary
recursion.
One might hope that these changes are just moving code around, but due
to how recursive modules are implemented, this refactoring is
motivated by performance profiling. In every cycle between recursive
modules, at least one of the modules must be "safe". A "safe" module
is one where all exposed values have function type. This allows the
compiler to initialize that module with functions that immediately
raise an exception, define the other modules using it, and then tie
the recursive knot by backpatching the safe module with the actual
functions at the end. This implementation works, but has the
consequence that the compiler must treat calls to functions of safe
recursive modules as indirect calls to unknown functions. This means
that they are not inlined or even called by symbol, and instead
calling them involves spilling registers if needed, loading their
address from memory, calling them by address, and restoring any
spilled registers. For operations like Trm.compare that are a handful
of instructions on the hot path, this is a significant
difference. Since terms are the keys of maps and sets in the core of
the first-order equality solver, those map operations are very very
hot.
Reviewed By: jvillard
Differential Revision: D26250533
fbshipit-source-id: f79334c68
Summary:
No functional change, apart from a minor change in invariant checking
for core constructors. Only to reduce diffs of upcoming changes.
Reviewed By: jvillard
Differential Revision: D26250518
fbshipit-source-id: a731e4fd6
Summary:
Inline functor applications, principally those involved in the
representation of (arithmetic) terms. This enables direct calls to
functions in the result of functor applications, instead of indirect
via an offset from the start of the module block resulting from the
functor appication. This also then enables further inlining
opportunities.
Reviewed By: jvillard
Differential Revision: D26338016
fbshipit-source-id: 27b770fa3
Summary: Also add support for deriving compare, equal, and sexp.
Reviewed By: ngorogiannis
Differential Revision: D26250524
fbshipit-source-id: b47787a9c
Summary:
A comparer `('a, 'compare_a) t` for type `'a` is a "compare" function
of type `'a -> 'a -> int` tagged with a phantom type `'compare_a`
acting as a singleton type denoting an individual compare function.
The point of these is to enable writing type definitions of containers
that depend on a compare function prior to applying a functor. For
example, a type of sorted lists could be exposed as:
```
type elt
type (elt, 'compare_elt) t = private elt list
```
and the operations manipulating sorted lists would be defined by a
functor that accepts a `Comparer.S` and implements the operations
using
```
let compare = (comparer :> elt -> elt -> int)
```
Reviewed By: ngorogiannis
Differential Revision: D26250528
fbshipit-source-id: ea61844ec
Summary: `make debug` should not be the same as `make release`
Reviewed By: ngorogiannis
Differential Revision: D26451307
fbshipit-source-id: 1bf924f92
Summary: No functional change, just to reduce diffs of upcoming changes.
Reviewed By: ngorogiannis
Differential Revision: D26250543
fbshipit-source-id: a14b6f4b0
Summary:
These links have changed it seems. Also delete the mini-table of
contents at the top of the Hello, World! page as docusaurus now produces
a nice (and up to date!) one automatically.
Reviewed By: skcho
Differential Revision: D26544300
fbshipit-source-id: 664a0eea1
Summary:
These pages are not referenced from anywhere and are stale, oops! We
even linked to checker-bug-types from our footer on all pages... These
pages are stale and replaced with auto-generated ones now.
Reviewed By: skcho
Differential Revision: D26544298
fbshipit-source-id: c3b7742b8
Summary: No need to keep more than one version + next version around.
Reviewed By: skcho
Differential Revision: D26544299
fbshipit-source-id: 1aff562cf
Summary:
Links to pages in static resources have been broken for a while it
seems: Docusaurus generates a Page not Found error for them, then
refreshing the URL loads the page properly... This is because of wrong
routing from the Docusaurus Single-Page App.
See https://github.com/facebook/docusaurus/issues/3309
A suggested workaround is to prepend `pathname://` in front of each link
not managed by docusaurus. This makes the page open in a new tab, which
is actually quite ok for our use cases: OCaml API docs and man pages.
Reviewed By: skcho
Differential Revision: D26544273
fbshipit-source-id: 2ed86ca4f
Summary:
This resolves a few instances of false negatives; typically:
```
if (x == y) {
// HERE
*x = 10;
*y = 44;
// THERE
}
```
We used to get
```
HERE: &x->v * &y ->v' * v == v'
THERE: &x->v * &y ->v' * v == v' * v |-> 10 * v' |-> 44
```
The state at THERE was thus inconsistent and detected as such (v` and
`v'` are allocated separately in the heap hence cannot be equal).
Now we normalize the state more eagerly and so we get:
```
HERE: &x->v * &y->v
THERE: &x->v * &y->v * v |-> 44
```
Reviewed By: skcho
Differential Revision: D26488377
fbshipit-source-id: 568e685f0
Sungkeun Cho
Jules Villard
Ezgi Çiçek
Josh Berdine
Mitya Lyubarskiy
Gabriela Cunha Sampaio