Summary: The `FN_loop2` was not actually FN because infer analyzes its complexity as degree 1 correctly.
Reviewed By: dulmarod
Differential Revision: D20468367
fbshipit-source-id: 9e4c19415
Summary: The `iterate_over_mycollection_quad_FN` was not actually FN because infer analyzes its complexity as degree 2 correctly. So, this diff removed `_FN` from there.
Reviewed By: ezgicicek
Differential Revision: D20467398
fbshipit-source-id: b10340612
Summary: There has never been a sufficient formal basis for soundness nor completeness of reports on locals. This diff changes the domain to effectively concern only expressions rooted at formals or globals.
Reviewed By: ezgicicek
Differential Revision: D19769201
fbshipit-source-id: 36ae04d8c
Summary: `Object.clone` modeled as pure until the analysis can distinguish returning a fresh object vs. having no side-effects.
Reviewed By: skcho
Differential Revision: D20439998
fbshipit-source-id: 421054cfb
Summary:
As ngorogiannis pointed out, we never expect whitespaces in classname, so
stripping makes no sense here in best case, and hides a bug under rug in
worst case.
Reviewed By: jvillard
Differential Revision: D20417033
fbshipit-source-id: bc7449171
Summary: Let's also print skipped calls in `pp` to ease debugging both for summary and intermediate steps.
Reviewed By: jvillard
Differential Revision: D20417852
fbshipit-source-id: 7da03ae81
Summary:
There is a module and a module type in the file PulseAbductiveDomain.ml
with the same name. This is confusing and it's better to keep separate names.
Reviewed By: jvillard
Differential Revision: D20388769
fbshipit-source-id: bcfed436e
Summary:
Be a bit more careful about the difference between PrePost.t and
AbductiveDomain.t. It's needed in another diff where the types will be
different.
Reviewed By: ezgicicek
Differential Revision: D20393927
fbshipit-source-id: beaf80c90
Summary: In preparation for PulseArithmetic to be something else.
Reviewed By: ezgicicek
Differential Revision: D20393928
fbshipit-source-id: d93131e12
Summary:
`JavaSplitName` is used to represent Java types (in `Procname` in particular). The type itself is a pair of string (an optional package qualifier) and a "type name" (the quotes are there because it may contain array qualifiers).
For example `java.lang.Object[][]` should be represented as
```
{package=Some "java.lang"; typename="Object[][]"}
```
The constructor `make` was misused to construct instead types such as
```
{package=None; typename="java.lang.Object[][]"}`
```
This is evident when we print the return type of a `Procname` non-verbosely (the default), but we still see the package qualifier.
Obviously this is not just a pretty-printing bug, the values were themselves wrong.
The fix is to use the `of_string` constructor which will parse the package and separate it correctly. Another bug (in response to this one) had to be fixed in `Procname.is_vararg` to maintain behaviour in Nullsafe and Quandary.
Reviewed By: mityal
Differential Revision: D20394146
fbshipit-source-id: 4633902eb
Summary:
We will use it in follow up diffs.
From many perspectives, if the function belongs to an anonymous class,
it is useful to know the original user-defined class.
This function makes this distinction clear.
Thanks to ngorogiannis, whos work on refactoring `Typ.name` made this module
easy enough so we can introduce unit tests!
Reviewed By: ngorogiannis
Differential Revision: D20389311
fbshipit-source-id: 408d95660
Summary: `Procname.Java.get_return_typ` is buggy because whenever faced with an array of objects, it returns a type that implies the object is stored by value in the array (this is correct behaviour only when the element type is primitive, not when it's an object type).
Reviewed By: ezgicicek
Differential Revision: D20384403
fbshipit-source-id: d91322d3a
Summary:
We try to consolidate Java-specific stuff in JavaClassName.
Let's introduce the function in JavaClassName and make it clear that
its analog in Typ.Name.Java one throws if called on a wrong type.
Reviewed By: ngorogiannis
Differential Revision: D20386357
fbshipit-source-id: a1577ef8b
Summary:
Impurity domain was tracking all changes to variables (with a list of traces that containing all write/invalid accesses). This results in having long traces with multiple access events for the same variable. For instance,
```
void swap_impure(int[] array, int i, int j) {
int tmp = array[i];
array[i] = array[j]; \\ included in the trace
array[j] = tmp; \\ included in the trace
}
```
here we recorded both array accesses.
This diff changes the domain to include accesses so that we only keep track of a single trace per access. Array accesses are only recorded once.
Note that we want to record all unique accesses, not just the first one, because impurity will be used for hoisting/cost where we will invalidate impure arguments and consider all the rest as not changing.
Reviewed By: jvillard
Differential Revision: D20385745
fbshipit-source-id: d3647dad3
Summary:
D20362149 missed
- to pass the optional argument `include_value_history` to the recursive call in `PulseTrace.add_to_errlog`.
- to set `include_value_history=false` for skipped calls.
This diff fixes these issues.
Reviewed By: skcho
Differential Revision: D20385604
fbshipit-source-id: 176e4d010
Summary: No need to load the contents of the whole file(s) as a string first.
Reviewed By: ngorogiannis
Differential Revision: D20362602
fbshipit-source-id: 46fbc3693
Summary:
Next step in moving logic from make to dune. Since dune understands
build rules with multiple targets we don't need to introduce
artificial pipelining as in make. Rules are pretty straightforward,
albeit somewhat verbose.
The tricky part here was adjusting deadcode detection.
Reviewed By: jvillard
Differential Revision: D20322605
fbshipit-source-id: 688e5f96f
Summary:
Main changes are:
1. Dune can promote targets into the source tree as a part of build. This
allows us to **remove custom promotion/installation logic in src/Makefile**.
2. Dune promotion only works for path within workspace. This required
**moving dune-workspace one folder up**: from infer/infer/src to infer/infer.
But this is not bad, since it makes it possible to migrate tests under dune at some point.
3. `checkCopyright` now also promoted into `infer/infer/bin` instead of
`infer/scripts` partly for consistency and partly because of the
dune-workspace location.
4. `byte` mode was replaced with `byte_complete`. The latter takes
similar amount of time to build compared to `byte`, but produces
standalone binaries that don't require InferCStubs to be
installed. This allowed to remove `dune_exec_shim` and custom logic
around `dune build InferCStubs.install` when dealing with byte
targets.
All in all, `infer/src/Makefile` is not about 2/3 its previous size
with less custom logic in Makefiles/scripts and more encoded in dune
build files.
Reviewed By: jvillard
Differential Revision: D20303902
fbshipit-source-id: 9e4c65bd0
Summary:
With the introduction of environments and profiles we no longer need
to generate most dune files in libraries via make. Also, those dune
builds don't need to be in OCaml.
In addition to converting build files to plain sexp definitions, this
patch also:
- Adjusts copyrightCheck to work correctly with sexp-based dune files.
- Adds auto-formatting for sexp-based dune files.
Reviewed By: jvillard
Differential Revision: D20250208
fbshipit-source-id: 495aeaa99
Summary: With plain/sexp dune files we need to support lisp style comments in checkCopyright
Reviewed By: jvillard
Differential Revision: D20366314
fbshipit-source-id: 04db9e3c1
Summary:
With profiles and `(env ...)` stanza it's possible to consolidate
various ocamlc/ocamlopt/etc setups in a single place.
Where previously we needed to append `dune.common` to every dune file
and specify `flags` and `ocamlopt_flags` now the flags are specified
in `env` and applied accross the board.
This allows to
1. simplify build definitions,
2. avoid the need to generate dune files,
3. use plain sexps instead of OCaml and JBuilder plugin in build
files.
(I'll try to address 2 and 3 in the followup patches).
Existing `make` targets should continue working as before. Also, we
can use dune CLI like so:
```
infer/src$ dune printenv --profile opt # <- very useful for introspection
infer/src$ dune build check
infer/src$ dune build check --profile test
infer/src$ dune build infer.exe --profile dev
infer/src$ dune build infer.exe --profile opt
```
Also, with just 1 context something like `dune runtest` will run unit
tests only once instead of N times, where N is the number of contexts.
Now, there's one difference compared to the previous setup with
contexts:
- Previously, each context had its own build folder, and building infer
in opt context didn't invalidate any of the build artifacts in default
context. Therefore, alternating between `make` and `make opt` had low
overhead at the expense of having N copies of all build artifacts (1
for every context).
- Now, there's just 1 build folder and switching between profiles does
invalidate some artifacts (but not all) and rebuild takes a bit more
time.
So, if you're alternating like crazy between profiles your experience
may get worse (but not necessarily, more on that below). If you want
to trigger an opt build occasionally, you shouldn't notice much
difference.
For those who are concerned about slower build times when alternating
between different build profiles, there's a solution: [dune
cache](https://dune.readthedocs.io/en/stable/caching.html).
You can enable it by creating a file `~/.config/dune/config` with the
following contents:
```
(lang dune 2.0)
(cache enabled)
```
With cache enabled switching between different build profiles (but
also branches and commits) has ~0 overhead.
Dune cache works fine on Linux, but unfortunately there are [certain
problems with
MacOS](https://github.com/ocaml/dune/issues/3233) (hopefully, those
will be fixed soon and then there will be no downsides to using
profiles compared to contexts for our case).
Reviewed By: jvillard
Differential Revision: D20247864
fbshipit-source-id: 5f8afa0db
Summary:
What was happening in that case is that a .inferconfig file containing `{ "myflag":
false }` used to be translated by CommandLineOption as `--no-` (`--no-<long>`),
because it picked the *non-deprecated* form of the option (here `myflag` would
have to be a deprecated form of the option since its non-deprecated form is
empty `""`). Instead, pick a non-empty form of the option.
Reviewed By: jberdine
Differential Revision: D20368784
fbshipit-source-id: 8e761e684
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary: Just for fun, and because killing InferPrint.ml is just so satisfying.
Reviewed By: ngorogiannis
Differential Revision: D20362643
fbshipit-source-id: 039cfec61
Summary:
Now that this module only prints report.json and costs_report.json, we
can dis-entangle the whole callback spaghetti.
Reviewed By: ngorogiannis
Differential Revision: D20362640
fbshipit-source-id: 56ffa4e08
Summary:
At this point in the stack, here's what's left in InferPrint.ml:
1. how to output report.json and costs_report.json
2. how to print summaries from the command line (`infer report`)
3. how to print --issues-tests stuff (`infer report --issues-tests`)
Keep only 1. in there. 2. goes to SpecsFiles.ml directly from infer.ml,
and 3. goes to its own module (also the fields to output in
--issues-tests get a non-poly variant).
1. does some extra stuff sometimes, eg in test-determinator mode. Keep
this for now.
Reviewed By: ngorogiannis
Differential Revision: D20362642
fbshipit-source-id: 0d9f0e8e2
Summary:
Make <infer-out>/report.json the default value for this option, as this
is what is used 99% of the time. Clean up test options using this.
Reviewed By: ngorogiannis
Differential Revision: D20362644
fbshipit-source-id: a1bb18757
Summary:
InferPrint hasn't been in charge of writing bugs.txt since forever.
This will be re-implemented as a post-processing of report.json instead
(like it is now, but in OCaml instead of python).
Reviewed By: ngorogiannis
Differential Revision: D20362641
fbshipit-source-id: 83d8cb53d
Summary:
I don't think anyone uses this. Meta-goal: cleaning up InferPrint.ml.
Measuring stats about summaries is good in principle, but we should do
it somewhere else instead of in the InferPrint callback hell. For
instance when we record each summary. Meanwhile, delete this.
Reviewed By: ngorogiannis
Differential Revision: D20362639
fbshipit-source-id: c73d431a5
Summary:
Move definitions of profiles from `dune-workspace` to `dune` since it
seems to be ok to use profiles in `dune-workspace` that are only
defined in `dune`. Since the `dune` but not `dune-workspace` file is
used when building as a vendored dependency, this seems to be
preferable.
Also, change the `opt` profile into a wildcard, which seems to be
preferable from the vendored-building perspective.
Also, set library public names such that including `sledge` in the
`libraries` phrase of `dune` files works.
Reviewed By: ngorogiannis
Differential Revision: D20376179
fbshipit-source-id: f2b634716
Summary:
Adding a model for malloc: we add an attribute "Allocated". This can be used for implementing memory leaks: whenever the variables get out of scope, we can check that if the variable has an attribute Allocated, it also has an attribute Invalid CFree.
Possibly we will need more details in the Allocated attribute, to know if it's malloc, or other allocation function, but we can add that later when we know how it should look like.
Reviewed By: jvillard
Differential Revision: D20364541
fbshipit-source-id: 5e667a8c3
Summary:
This is not a full cleanup, but it is better than nothing.
At least `callback2` won't trigger me each time I see it anymore.
Reviewed By: jvillard
Differential Revision: D20364812
fbshipit-source-id: 8f25c24ad
Summary:
clean up dependencies by using apt addon rather than `sudo apt`. This should make it easier to re-add osx support later.
Pull Request resolved: https://github.com/facebook/infer/pull/1235
Differential Revision: D20368920
Pulled By: jvillard
fbshipit-source-id: 456e8af6c
Summary: Impurity traces are quite big due to recording values histories. Let's simplify the traces by removing pulse's value histories.
Reviewed By: skcho
Differential Revision: D20362149
fbshipit-source-id: 8a2a6115e
Summary: Type is not enough to say a function call of `Provider.get` is expensive or not.
Reviewed By: jvillard
Differential Revision: D20366206
fbshipit-source-id: 83d3e8741
Summary:
This diff uses a type parameter of `Provider.get` to decide whether assigning expensive cost to the
function call or not. For example, if the type is small one like `Provider<Integer>`, it be
evaluated to have a unit cost, otherwise a linear cost.
To get the return type of `Provider.get`, I added a simple analyzer that collects "casted" types
backwards. In Sil, while the function call statement loses the return type, e.g,
```
n$5=_fun_Object Provider.get()(n$3:javax.inject.Provider*);
```
the `n$5`'s value is usually casted to a specific type at some point later.
```
*&$irvar0:java.lang.Object*=n$5
n$8=*&$irvar0:java.lang.Object*
n$9=_fun___cast(n$8:java.lang.Object*,sizeof(t=java.lang.Integer;sub_t=( sub )(cast)):void)
```
So, the analyzer starts from the cast statements backward, collecting the types to cast for each
variables.
Reviewed By: ezgicicek
Differential Revision: D20345268
fbshipit-source-id: 704b42ec1
Sungkeun Cho
Martin Trojer
Ezgi Çiçek
Nikos Gorogiannis
Mitya Lyubarskiy
Dulma Churchill
Jules Villard
Artem Pianykh
Josh Berdine
Amar Paul