Summary: This test wasn't building correctly or being called by the toplevel makefile
Reviewed By: jvillard
Differential Revision: D16458386
fbshipit-source-id: 48a0c2f36
Summary:
newer is better, right?
All the code changes in infer are because of core being bumped to v0.12.
Reviewed By: jberdine
Differential Revision: D16223183
fbshipit-source-id: f3c339966
Summary:
Replaced by pulse. `--ownership` is now a deprecated form of `--pulse`.
The ownership checker is starting to give wrong answers due to changes in the
clang frontend, so it's better to remove it in favour of pulse.
there_goes_my_hero
Reviewed By: ngorogiannis
Differential Revision: D16107650
fbshipit-source-id: bb2446a19
Summary:
This is a simple checker that identifies inefficient uses of `keySet` iterator where (not only the key but also) the value is accessed via `get(key)`. It is more efficient to use `entrySet` iterator which already returns both key-value pairs. This optimization would get rid of many extra lookups which can be expensive.
We simply traverse the CFG starting from the loop head upwards and pick up the map that is iterated over. Then, we check in the loop nodes if there is a call to `get(...)` over this map. If, so we report.
Reviewed By: ngorogiannis
Differential Revision: D15737779
fbshipit-source-id: 702465b4e
Summary:
That test wasn't hooked up to `make test` and so regressed at some
unknown time in the past. Just recording the new state of things for
now.
Reviewed By: ngorogiannis
Differential Revision: D15495234
fbshipit-source-id: 14fb112de
Summary:
TOPL properties are essentially automata, which specify a bad pattern.
This commit is just a parser for them.
Reviewed By: jvillard
Differential Revision: D14477671
fbshipit-source-id: c38a8ef37
Summary:
Figure out where libgmp and libmpfr are auto-magically by looking at where
`ldd` (or `otool` on osx) thinks they are.
This way we don't need to hardcode as much.
Reviewed By: ngorogiannis
Differential Revision: D14208580
fbshipit-source-id: 3b2dca5b2
Summary: Provide hooks into the autoconf configure script to define where libgmp and libmpfr may be found. Use these and opam to copy the more exotic library objects into the installation of infer on a new `make install-with-libs` target so that the binaries can be distributed usefully, i.e., without users having to install gmp, mpfr, and more importantly apron and elina (which need ocaml + opam + ..., which would defeat the point of having binaries).
Reviewed By: skcho
Differential Revision: D14065317
fbshipit-source-id: 9a2ac7200
Summary:
Building clang takes long and sometimes only some minor step in the setup
script has changed, triggering a spurious rebuild. Print a big bold message
letting the user know of their options, but only if clang has been installed
previously.
```
(warn_clang)jul@devvm2701:~/infer$ make -j 19
[04:02:44][2288770] Facebook setup...
*** Now building clang, this will take a while...
*** If you believe that facebook-clang-plugins/clang/install is up-to-date you can(TERM_RESET)
*** interrupt the compilation (Control-C) and run this to prevent clang from being rebuilt:
/home/jul/infer/facebook-clang-plugins/clang/setup.sh --only-record-install
(TIP: you can also force a clang rebuild by removing /home/jul/infer/facebook-clang-plugins/clang/installed.version)
[...]
```
Reviewed By: katiejots
Differential Revision: D13956431
fbshipit-source-id: da163643d
Summary:
`make clean` would fail calling `xcodebuild` to clean. It also calls `ant
clean`. Instead, do the cleaning ourselves by deleting the appropriate stuff so
that it's faster and more reliable.
Also clean the OCaml build before cleaning the tests as that's what more
important most of the time.
Also don't delete the man pages as part of `make clean` as they are checked in.
Also fix ant's Makefile so that the build points at the right .class files (the
path to the .class files was wrong so `make -C infer/tests/build_systems/ant`
would start `ant` for *each* file instead of once).
Reviewed By: martintrojer
Differential Revision: D13956218
fbshipit-source-id: bce27fe11
Summary: Publish solutions to the lab, and a Docker file and image to get started more quickly with infer hacking.
Reviewed By: mbouaziz
Differential Revision: D13648847
fbshipit-source-id: daf48ad03
Summary:
Switches from opam 1 to opam 2.
Opam2 has some cool new features that simplify some of the scripting.
Notable changes:
1. Use the new `opam lock` *plugin* from https://github.com/AltGr/opam-lock/ instead of https://github.com/rgrinberg/opam-lock. This has a simpler interface for our purposes.
2. Change the way `./build-infer.sh` can be called to use an already existing switch: simply pass `--user-opam-switch` to the script and it won't attempt to create/set the current switch. This can be used to build infer in a local switch for instance.
3. Take advantage of automatic pinning where possible, eg to install infer deps without using opam.locked.
Reviewed By: ngorogiannis
Differential Revision: D13167863
fbshipit-source-id: 1a667c270
Summary: Reports will now be issued for the class loads of the methods specified by the option `--class-loads-roots`.
Reviewed By: jvillard
Differential Revision: D10466492
fbshipit-source-id: 91456d723
Summary:
New analysis in foetal form to detect invalid use of C++ objects after their
lifetime has ended. For now it has:
- A domain consisting of a graph of abstract locations representing the heap, a map from program variables to abstract locations representing the stack, and a set of locations known to be invalid (their lifetime has ended)
- The heap graph is unfolded lazily when we resolve accesses to the heap down to an abstract location. When we traverse a memory location we check that it's not known to be invalid.
- A simple transfer function reads and updates the stack and heap in a rudimentary way for now
- C++ `delete` is modeled as adding the location that its argument resolves to to the set of invalid locations
- Also, the domain has a really crappy join and widening for now (see comments in the code)
With this we already pass most of the "use after delete" tests from the
Ownership checker. The ones we don't pass are only because we are missing
models.
Reviewed By: mbouaziz
Differential Revision: D10383249
fbshipit-source-id: f414664cb
Summary:
Fix the logic for computing duplicate symbols. It was broken at some point and some duplicate symbols creeped into our tests. Fix these, and add a test to avoid duplicate symbols detection to regress again.
Also, this removes one use of `Cfg.load`, on the way to removing file-wide CFGs from the database.
Reviewed By: ngorogiannis
Differential Revision: D10173349
fbshipit-source-id: a0d2365b3
Summary:
Also changes `clang_plugin_test` so that it also runs the clang-ocaml tests, and add a new `clang_plugin_test_replace` target.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jberdine
Differential Revision: D10141902
fbshipit-source-id: 927c55a4f
Summary:
The method matcher is now used sufficiently it warrants refactoring out into its own module.
Also, kill dev-android-strict-mode and leave starvation-strict-mode as the stronger option.
Reviewed By: jeremydubreil
Differential Revision: D9990753
fbshipit-source-id: 626a70a19
Summary:
This allows infer devs to see the effects their changes have on the infer manuals.
Check in the manuals for each subcommand + the output of `--help-full` to get a
complete picture. If this is too annoying we can also check in only
`--help-full`.
Reviewed By: mbouaziz
Differential Revision: D9916404
fbshipit-source-id: b981e2c33
Summary:
Turn off by default until mature enough.
Also rename the dev-strict-mode test dir to highlight the dev part.
Reviewed By: mbouaziz
Differential Revision: D9775571
fbshipit-source-id: c3a41bbdf
Summary:
First step in writing an analyzer that is meant to run only on Android core library implementation.
This will, when finished, compute the library entrypoints that may lead to a strict mode violation.
The normal analyzer will use those to statically flag strict mode violations in app code.
Strict Mode is an Android debug mode, where doing certain things (like disk read/write or network activity) on the UI thread will raise an exception. We want to statically catch these, as well as indirect versions (the UI thread takes a lock and another thread holding that lock calls a method that would be a strict mode violation).
Reviewed By: mbouaziz
Differential Revision: D9634407
fbshipit-source-id: c30bcedb3
Summary:
Some paths are hardcoded in infer as being relative to the current executable,
for instance the directory where to find the models. By copying infertop.bc to
infer/bin like we do for `infer` these relative paths lead to the expected
place, which means models can be loaded in the toplevel like they would be in a
normal infer execution. This is more useful for debugging than previously.
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D9197142
fbshipit-source-id: 48c4f82fb
Summary:
This makes sure that the javac_jar is disabled when setting the external compiler option to point at the Infer wrapper
Closes#976
Reviewed By: jvillard
Differential Revision: D9193336
fbshipit-source-id: abafb51fc
Summary:
See the results online!
http://fbinfer.com/docs/man-pages.htmlhttp://fbinfer.com/docs/internal-API.html
These html pages are written by hand, but their target is auto-generated.
I cheated a bit by generating the docs for the current version of infer and not
0.15.0 but they are hopefully very similar.
Depends on D8314572
Reviewed By: jeremydubreil
Differential Revision: D8318132
fbshipit-source-id: ffca43c
Summary:
`make doc` will use `jbuilder` (which in turn uses `odoc`) to generate the
documentation for infer's modules. This is useful to browse the APIs of infer
and gives a more discoverable place to host more general documentation about
infer's internals.
Besides the actual plumbing necessary to generate the docs, this diff also
- Moves the various infer/src/*/README.md to index.mld files that make it to the generated docs
- Fixes some doc comments that would anger `ocamldoc`
Closes#435
Reviewed By: mbouaziz
Differential Revision: D8314572
fbshipit-source-id: 4a5c70e
Summary: The clang distribution uses symlinks in some places, which avoids copying rather large binaries. `make install` was replacing these with actual copies. Try not to be so wasteful anymore.
Reviewed By: mbouaziz
Differential Revision: D8260777
fbshipit-source-id: eccabab
Summary:
Change the documentation to refer to (upcoming) binary releases. Update the
scripts to treat .release differently: now we want to build clang and the
plugins even in release mode, as that's just the preparation for the release
tarball containing only binaries.
Reviewed By: mbouaziz
Differential Revision: D8235388
fbshipit-source-id: bfb4ae8
Summary:
New script to create binary releases instead of just packaging clang + facebook clang plugins.
Basically calls `make install` into a directory and tars it.
Reviewed By: mbouaziz
Differential Revision: D8204034
fbshipit-source-id: b664129
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary: Set arguments of pointer type as initialised for indirect function calls.
Reviewed By: mbouaziz
Differential Revision: D8097895
fbshipit-source-id: 830f568
Summary: Follow C++ in having local variables owned plus silence reports on paths rooted on logical vars. We need both because when propagating ownership from right to left, the initial status of a temp var as owned is lost.
Reviewed By: sblackshear
Differential Revision: D7988575
fbshipit-source-id: 2e817d7
Summary: I needed it for debugging but, to my dismay, it was borked again. This time it was because `jbuilder` moved the object files to another directory since the last jbuilder update.
Reviewed By: mbouaziz
Differential Revision: D7926267
fbshipit-source-id: 42ad26a
Summary:
`brew install opam` is unhappy and wants us to run `brew unlink python`
beforehand so do that.
The `make install` logic in infer had a problem of nested `if` logic.
Reviewed By: da319
Differential Revision: D7686760
fbshipit-source-id: dd0c988
Summary:
Upgrade ocamlformat, and base which needs to be done in sync in order to build
ocamlformat, and the other deps can come for the ride.
Reviewed By: jvillard
Differential Revision: D7663537
fbshipit-source-id: 3e90970
Summary:
This was meant to be part of D7569054 but the wrong version landed.
classicblunder
Reviewed By: mbouaziz
Differential Revision: D7615865
fbshipit-source-id: a29b3af
Summary:
Making the shell stricter revealed a bug in `make devsetup`:
`shell_config_file` can be used without being initialised. Also, the error path
when testing if `BUILD_MODE` was set to default was wrong and would execute all
except the first `echo` command unconditionally. I changed the test so that it
tests only if `BUILD_MODE` is set in the environment.
Reviewed By: martinoluca
Differential Revision: D7615333
fbshipit-source-id: 08c5eb0
Summary:
Lost in D7569054: because `-e` is set, the command to run needs to be wrapped a
bit more carefully to continue the execution in case of failure and get to the
part where we print the error messages on the console.
Reviewed By: mbouaziz
Differential Revision: D7599442
fbshipit-source-id: 65f6bf7
Summary:
Run with `SHELL = bash -e -u -o pipefail` to catch many kinds of failures. We
were silently failing during `make install` because of some missing escaping,
and the failure was hidden because it was happening inside a bash `for` loop.
This fixes the escaping issue and makes sure such issues will result in an
error as of now.
Also removes dangerous `find -exec` instances: `find` will `exit 0` event if
some commands failed.
Fixes#887
Reviewed By: mbouaziz
Differential Revision: D7569054
fbshipit-source-id: 542fe50
Summary:
The dead code checker slows down the test suite notably, and can be annoying
when you're in the middle of a change.
Depends on D7443825
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D7443881
fbshipit-source-id: 746cf6e
Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary:
This avoids rebuilding the man pages at every build. Also add a `byte_infer`
target to build infer in bytecode + the models, and an `opt` target, as I found
myself missing those.
Reviewed By: mbouaziz
Differential Revision: D6761008
fbshipit-source-id: ffedd4b
Summary: This subdirectory was only containing tests related to nullable on Objective C.
Reviewed By: sblackshear
Differential Revision: D6657654
fbshipit-source-id: 11003f2
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary: This is to allow the bi-abduction analysis and the nullable checker for Clang languages to run together without stepping on each other toes.
Reviewed By: sblackshear
Differential Revision: D6567934
fbshipit-source-id: a318c33
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Buck reads the version on stderr or, very recently, from either stdout or stderr.
This makes infer output the version of stderr when called from Buck or invoked as javac, and on stdout otherwise.
Reviewed By: martinoluca
Differential Revision: D6098392
fbshipit-source-id: 23f1d5a
Summary: Tuareg is only useful for emacs, and `opam install tuareg` fails if emacs is not found.
Reviewed By: mbouaziz
Differential Revision: D6098693
fbshipit-source-id: 167628a
Summary: We will then be able to merge the tests for the other checkers without affecting these lab tests
Reviewed By: jvillard
Differential Revision: D6039433
fbshipit-source-id: e575ce9
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary: Example of combination between annotating fields with nullable and the biabduction analysis in Objective C
Reviewed By: dulmarod
Differential Revision: D5906016
fbshipit-source-id: b95c6e0
Summary: Useful to know if your build is going to take 40s or 4 minutes.
Reviewed By: jeremydubreil
Differential Revision: D5872878
fbshipit-source-id: 1d370f3
Summary:
Suggesting to add `_Nullable` on the fields checked for, or assigned to, `nullptr` will allow the biabduction analysis to report null dereferences that are related to the lifetime of objects.
Depends on D5832147
Reviewed By: sblackshear
Differential Revision: D5836538
fbshipit-source-id: c1b8e48
Summary:
With flambda (`-O3`), compilation time is ~5x slower, but the backend is ~25% faster!
To mitigate the atrocious compilation times, introduce a new `opt` build mode in the jbuilder files.
- build in "opt" mode by default from the toplevel (so that install scripts and external users get the fastest infer by default), in "default" mode by default from infer/src (since the latter is only called directly by infer devs, for faster builds)
- `make byte` is as fast as before in any mode
- `make test` will build "opt" by default, which is very slow. Solution for testing (or building the models) locally: `make BUILD_MODE=default test`.
- You can even change the default locally with `export BUILD_MODE=default`.
The benchmarks are to be taken with a sizable pinch of salt because I ran them only once and other stuff could be running in the background. That said, the perf win is consistent across all projects, with 15-20% win in wallclock time and around 25% win in total CPU time, ~9% win in sys time, and ~25% fewer minor allocations, and ~5-10% fewer overall allocations. This is only for the backend; the capture is by and large unaffected (either the same or a tad faster within noise range).
Here are the results running on OpenSSL 1.0.2d on osx (12 cores, 32G RAM)
=== base
infer binary: 26193088 bytes
compile time: 40s
capture:
```lang=text
real 1m7.513s
user 3m11.437s
sys 0m55.236s
```
analysis:
```lang=text
real 5m41.580s
user 61m37.855s
sys 1m12.870s
```
Memory profile:
```lang=json
{
...
"minor_gb": 0.1534719169139862,
"promoted_gb": 0.0038930922746658325,
"major_gb": 0.4546157643198967,
"allocated_gb": 0.6041945889592171,
"minor_collections": 78,
"major_collections": 23,
"compactions": 7,
"top_heap_gb": 0.07388687133789062,
"stack_kb": 0.3984375,
"minor_heap_kb": 8192.0,
...
}
```
=== flambda with stock options (no `-Oclassic`, just the same flags as base)
Exactly the same as base.
=== flambda `-O3`
infer binary: 56870376 bytes (2.17x bigger)
compile time: 191s (4.78x slower)
capture is the same as base:
```lang=text
real 1m9.203s
user 3m12.242s
sys 0m58.905s
```
analysis is ~20% wallclock time faster, ~25% CPU time faster:
```lang=text
real 4m32.656s
user 46m43.987s
sys 1m2.424s
```
memory usage is a bit lower too:
```lang=json
{
...
"minor_gb": 0.11583046615123749, // 75% of previous
"promoted_gb": 0.00363825261592865, // 93% of previous
"major_gb": 0.45415670424699783, // about same
"allocated_gb": 0.5663489177823067, // 94% of previous
"minor_collections": 73,
"major_collections": 22,
"compactions": 7,
"top_heap_gb": 0.07165145874023438,
"stack_kb": 0.3359375,
"minor_heap_kb": 8192.0,
...
}
```
=== flambda `-O2`
Not nearly as exciting as `-O3`, but the compilation cost is still quite high:
infer: 37826856 bytes
compilation of infer: 100s
Capture and analysis timings are mostly the same as base.
Reviewed By: jberdine
Differential Revision: D4867979
fbshipit-source-id: 99230b7
Summary: This will run infer with `--no-keep-going` by default in our tests.
Reviewed By: sblackshear
Differential Revision: D5814237
fbshipit-source-id: c1e1a4e
Summary:
This gets rid of the horrible hack of asking jbuilder to build
_build/{default,test}/.ppx/ppx_compare/ppx.exe prior to starting several
jbuilds in parallel. We now refrain from starting several jbuilds in parallel.
Also, I finally understood that order-only deps do nothing for phony targets,
and not much else for non-phony ones. I hate make even more.
Reviewed By: jberdine
Differential Revision: D5678699
fbshipit-source-id: 52179e8
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary: This takes several seconds and is better tested in parallel with the other tests instead of at the end.
Reviewed By: mbouaziz
Differential Revision: D5591774
fbshipit-source-id: f474cae
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary:
Do not use the deprecated (and slower) `#infer` flavor. Instead, `infer-run`
runs capture with the `#infer-capture-all` flavor, followed by merging targets,
followed by the analysis.
Move the call to `MergeCapture` around to make this change easier.
Reviewed By: mbouaziz
Differential Revision: D5547199
fbshipit-source-id: 53c9996
Summary: Define `default` target at the very top of the Makefile to make sure some other target doesn't replace it, as was done accidentally in D5498555
Reviewed By: martinoluca
Differential Revision: D5536691
fbshipit-source-id: 7398ec0
Summary:
Cosmetic changes to the output of `make clean` and `make test-replace`.
Run the inferTraceBugs tests from tests/build_systems/ like other such e2e
tests, so that they can run in parallel with other tests instead of
sequentially at the end.
Reviewed By: dulmarod
Differential Revision: D5526599
fbshipit-source-id: 57231bd
Summary:
Pretty basic: warn when we see an assignment instruction `x = ...` and `x` is not live in the post of the instruction.
Only enabled for Clang at the moment because linters already warn on this for Java. But we can enable it later if we want to (should be fully generic).
Reviewed By: jeremydubreil
Differential Revision: D5450439
fbshipit-source-id: 693514c
Summary:
Fixes 2 issues with the build:
- The OCaml dependencies (Version.ml, atdgen-generated stuff, ...) would be generated twice when running `make -j test` from a clean tree, because `make` has no inter-Makefile visibility over common dependencies.
- We would run `atdgen` twice: once for the .ml, once for the .mli, even though one invocation is enough for both.
Add `make ocaml_clean` to nuke only the OCaml code (in particular because
rebuilding the C++ code in the plugin is slow when all I want to get rid of the
OCaml stuff).
Reviewed By: mbouaziz
Differential Revision: D5415318
fbshipit-source-id: 16f42c6
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Add support for converting without actually converting. To be used as
a landing pad for rebasing over the conversion.
Reviewed By: jvillard
Differential Revision: D5379967
fbshipit-source-id: 1bd932d
Phoebe Nichols
Jules Villard
Martin Trojer
Josh Berdine
Ezgi Çiçek
Nikos Gorogiannis
Radu Grigore
Dino Distefano
Nikos Gorogiannis
Sungkeun Cho
Mehdi Bouaziz
Julian Sutherland
Martino Luca
Jeremy Dubreil
Daiva Naudziuniene
Sam Blackshear
Dulma Churchill
Jia Chen