Summary:
Note: Disabled by default.
Having some support for values, we can report when a null or constant
value is being dereferenced. The particularity here is that we don't
report when 0 is a possible value for the address, or even if we know
that the value of the address can only be 0 in that branch! Instead, we
allow ourselves to report only when we the address has been *set* to
NULL (or any constant).
This is in line with how pulse deals with other issues: only report when
1. we see an address become invalid, and
2. we see the same address be used later on
Reviewed By: skcho
Differential Revision: D17665468
fbshipit-source-id: f1ccf94cf
Summary:
This was causing loads of false positives later in the stack.
Invalidating the address of the object seems to be enough here as it
doesn't break any tests.
Reviewed By: ezgicicek
Differential Revision: D18246090
fbshipit-source-id: 2ef9a6a5c
Summary:
This diff avoids unqualified variables by `ItvUpdatedBy` are qualified later. For example,
```
z = x & y;
z = z + 1;
```
While `z` should not be selected as a control variable, it wasn't, because it was qualified by the addition. This pattern introduces FPs in many cases.
Reviewed By: ngorogiannis
Differential Revision: D18505894
fbshipit-source-id: 13aec3008
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
We used to use default for this, which is both buggy and hard to
diagnose. Now we explicitly document nullsafe behaviour in this case.
Reviewed By: artempyanykh
Differential Revision: D18481220
fbshipit-source-id: 0b0cf8b38
Summary:
This diff excludes integer variables from control variables when their values are calculated by
binary operators.
Reviewed By: ezgicicek
Differential Revision: D18505826
fbshipit-source-id: 710533d4c
Summary: Adding a trace that includes when strongSelf was assigned to, and when it's used without a check.
Reviewed By: skcho
Differential Revision: D18506113
fbshipit-source-id: 778c4b086
Summary:
Term.solve makes the assumption that all distinct normalized constants
denote distinct values. This is fragile at best, and it is better to
enumerate the cases where solve discovers inconsistency.
Reviewed By: jvillard
Differential Revision: D18459619
fbshipit-source-id: 71f52557c
Summary:
Equality.or_ assumed a simpler representation of equality relations,
and was incomplete as a result.
Reviewed By: jvillard
Differential Revision: D18298138
fbshipit-source-id: cf91229f6
Summary:
Currently only user-specified opam switches that name compilers are
supported. This diff generalizes this so that the switch name and
compiler can be specified separately.
Reviewed By: jvillard
Differential Revision: D18477910
fbshipit-source-id: f17c6363d
Summary: Let's make UI/Cold start parts of the message bold to get more attention.
Reviewed By: jvillard
Differential Revision: D18504857
fbshipit-source-id: b0f199f55
Summary:
The variable strongSelf, because it is equal to a weak captured pointer, needs to be checked for null before being used, otherwise it could be null by the time the block is executed.
Added this check to the SelfInBlock checker, and removed it from biabduction.
We want to migrate all the objc checks from biabduction, so it will be easier to change and faster and more reliable. Moreover, this check is more general, it will flag any use of unchecked strongSelf, not just a dereference.
Reviewed By: skcho
Differential Revision: D18403849
fbshipit-source-id: a9cf5d80b
Summary:
There was a precision loss during the substitution of array block. For example:
Callee's abstract memory includes an array block as follows, where `a` is a parameter.
```
a.elements -> { a.elements[*] with a.elements.size }
```
Callers' abstract memory includes a pointer that may point to multiple array blocks.
```
c -> { x, y }
x.elements -> { x.elements[*] with x.elements.size }
y.elements -> { y.elements[*] with y.elements.size }
```
When the callee is called with the parameter `c`, the callees memory is substituted to:
```
x.elements -> { x.elements[*] with top , y.elements[*] with top }
y.elements -> { x.elements[*] with top , y.elements[*] with top }
```
because `a.elements[*]` was substituted to `{ x.elements[*] , y.elements[*] }`
and `a.elements.size` was substituted to `top ( = x.elements.size join y.elements.size )`.
This diff tries to keep the precision in the specific case, not to join the sizes of array blocks.
So now the same callee's abstract memory is substituted to:
```
x.elements -> { x.elements[*] with x.elements.size }
y.elements -> { y.elements[*] with y.elements.size }
```
Reviewed By: ngorogiannis
Differential Revision: D18480585
fbshipit-source-id: b70e63c22
Summary: Due to the weakness of the analysis which can't detect side-effecting prop setting (e.g. as in `builder.prop1(..)`), we currently have many broken chains that do do have any `create` method in their prefixes. Let's not report on these broken chains.
Reviewed By: skcho
Differential Revision: D18503523
fbshipit-source-id: 7506e34b7
Summary:
In some apps executors are obtained by calling standard framework methods (and not by using DI with annotations).
To treat this style, we need to
- Detect calls that return such executors (`do_executor_effect`) and tag the return result with an `Attribute` indicating that it is now an executor, plus what thread it uses.
- Use that information when calling `execute`, to resolve the executor, if any, and its thread (in `do_work_scheduling` via `AttributeDomain.get_executor_constraint`).
- All this requires a new domain component, mapping variables to attributes. This extends the component previously used for remembering whether a variable is the result of a check on whether we run on the UI thread.
At the same time, I un-nested some functions from the transfer function for readability.
Reviewed By: skcho
Differential Revision: D18476122
fbshipit-source-id: bc39b5c2f
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
This method was the last escape hatch for InferredNullability to
misreport about its origin.
Now each time we change nullability we provide origin that is consistent
with the nullability itself.
Reviewed By: artempyanykh
Differential Revision: D18453567
fbshipit-source-id: 3d9b7fa2e
Summary:
This is one of key diff in this refactoring stack.
Previously, we used to set nullability independently of type origin,
which opened doors for inconsistent states, bugs, and overcomplicated
code.
Now we have just two method left:
1. `create` -> the main one, yay
2. `set_nonnull` -> will get rid of this in the next diff.
Reviewed By: artempyanykh
Differential Revision: D18451950
fbshipit-source-id: edc485709
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
In this diff, we merely rename the value to clearly reflect its currect
usage.
In follow up diffs we are going to make usages of this instance more
restricted and concentrate them in several places in the code.
Reviewed By: artempyanykh
Differential Revision: D18451290
fbshipit-source-id: cf3773364
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
1. `Formal` was bit cryptic name.
2. Splitting method param and this makes a lot of sense. It is almost an
implementation detail that hey happen to come from "param" in the
method's signature.
3. Apart from others, this diff fixes a minor bug - we used to treat
this as DeclaredNonnull, which (in future) means suppressing legit warnings
like condition redundant. This would be an issue if we were to start
showing "high confidence" condition redundant warnings.
Reviewed By: ngorogiannis
Differential Revision: D18451294
fbshipit-source-id: acc295e3f
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
1. Make Field origin a record: consistent with Proc; more readable; will
add more elements in follow up diffs.
2. `Proc` is bit ambiguous: it is unclear if this is a method call result or param.
Let's make it clear that it is the result of a method call.
Reviewed By: ngorogiannis
Differential Revision: D18450188
fbshipit-source-id: c5abae3ad
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
Using `New` was definitely not a good idea here, we need a specific
data type value here.
Reviewed By: artempyanykh
Differential Revision: D18450174
fbshipit-source-id: 7ce7cc7e8
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
Introducing more specific origins will allow us to automatically infer
nullability based on type origin (in follow up diffs).
Reviewed By: ngorogiannis
Differential Revision: D18450165
fbshipit-source-id: 9dc0d25c0
Summary:
This diff uses `of_java_array_alloc` instead of `of_c_array_alloc`. Java's array does not have
offset and stride. While this simplifies abstract memories in Java, there is not visible changes I can think of.
Reviewed By: ezgicicek
Differential Revision: D18453474
fbshipit-source-id: 36bdf3daf
Summary:
We were not tracking static `create ` and `build` methods intra-procedurally in the analysis and we just looked up their summaries. This resulted in not having static `create` methods in the trace. Let's fix that by pushing static check into `satisfy_heuristic`.
This results in a few FPs, but such cases are not very common in the codebase.
Reviewed By: skcho
Differential Revision: D18451955
fbshipit-source-id: d4ccf46f5
Summary:
We consider Java collections to be like c++ std::vectors and add models for
- `Collections.get(..)`
- `__cast`
Reviewed By: skcho
Differential Revision: D18449607
fbshipit-source-id: 448206c84
Summary: `equals1` and `equals2` in `SafeInvertedMap.join` are references that indicate whether given parameters and the result is physically equal or not. This diff fixes a missing update of them.
Reviewed By: ezgicicek
Differential Revision: D18450680
fbshipit-source-id: bae19cbe9
Summary:
The treatment of type conversions is too complicated, non-uniform,
etc. This diff attempts to simplify things by separating integer to
integer conversions, which are interpreted, from others, which are
essentially just uninterpreted functions. Integer conversions are now
handled using two expression and term forms: Signed and
Unsigned. These each interpret their argument as either a signed or
unsigned number of a given bitwidth:
```
| Signed of {bits: int}
(** [Ap1 (Signed {bits= n}, dst, arg)] is [arg] interpreted as an
[n]-bit signed integer and injected into the [dst] type. That is,
it two's-complement--decodes the low [n] bits of the infinite
two's-complement encoding of [arg]. The injection into [dst] is a
no-op, so [dst] must be an integer type with bitwidth at least
[n]. *)
| Unsigned of {bits: int}
(** [Ap1 (Unsigned {bits= n}, dst, arg)] is [arg] interpreted as an
[n]-bit unsigned integer and injected into the [dst] type. That
is, it unsigned-binary--decodes the low [n] bits of the infinite
two's-complement encoding of [arg]. The injection into [dst] is a
no-op, so [dst] must be an integer type with bitwidth greater than
[n]. *)
| Convert of {src: Typ.t}
(** [Ap1 (Convert {src}, dst, arg)] is [arg] converted from type [src]
to type [dst], possibly with loss of information. The [src] and
[dst] types must be [Typ.convertible] and must not both be
[Integer] types. *)
```
Reviewed By: ngorogiannis
Differential Revision: D18298140
fbshipit-source-id: 690f065b4
Summary:
`getThis` is an idiom for allowing Builder sub-classes to jump through the hoops of covariance plus java generics with self types. It's declared as abstract in the (generic) inner `Builder` class of a root class, and subclasses declare generic `Builder`s that inherit from the generic root `Builder` and trivially implement this method by returning `this`. Obviously, this returns conditional ownership (if `this` is owned, then the return value is owned).
The way it's typically used is
```
T foo() {
...
return getThis();
}
```
However, because abstract methods need dynamic dispatch for proper summarisation, we miss all that. A workaround was been implemented in D8947992 (see that for context), but it was buggy -- it required that the LHS type in the assignment
```
lhs = this.getThis();
```
is the same as the type of `this`, but this is too strict (eg, when using casts).
Here, the condition is changed to requiring that the return type of the method is the same as the type of `this`.
We also avoid asking for the `procdesc` as everything needed is in the attributes.
Reviewed By: jberdine
Differential Revision: D18450737
fbshipit-source-id: e67f0495c
Summary:
It returns non-top value when one of the parameters of band is positive, i.e., `x & 255` returns
`[0, 255]` instead of top.
Reviewed By: ezgicicek
Differential Revision: D18448614
fbshipit-source-id: aaa298a66
Summary:
LLAIR changed how it represents integer-to-integer conversions, and this
updates the semantics and proofs to show that the new way is correct.
Reviewed By: jberdine
Differential Revision: D18448616
fbshipit-source-id: b657fcd20
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Summary:
This diff tries more narrowing during analysis in order to get preciser results on nested loops.
In the widening phase, it does narrowing a loop right after its widening, for each loops. In general, this may make the widening phase non-terminating because it keeps the abstract state from monotonely increasing to the fixed point in a finite number of iterations. To avoid that situation, this diff applies the narrowing only when the first visit of the loop in the widening phase.
Reviewed By: ngorogiannis
Differential Revision: D18400631
fbshipit-source-id: cc76f7e85
Summary: Sometimes there is a code like `for(int i = 1; i < x; i++){ l.add(); }`, where the first element in a list is addressed specifically. This case was not analyzed precisely, because the alias value is added only when `i` is initialized by 0 by heuristic. This diff extends the heuristic, so it adds a size alias between `i` and `l.size()` when `i` is initialized by 0 or 1.
Reviewed By: ezgicicek
Differential Revision: D18351867
fbshipit-source-id: e7d19a4ec
Summary:
This diff adds semantics of Java function calls of enum `values` inside class initializers.
* Java class initializer function initializes a specific field `$VALUES`, which points to the list
of enum values.
* The `values` function of enum class returns the value of `$VALUES`.
The problem is when the `values` function is called inside the class initializer, for example:
```
enum Color {
RED,
GREEN,
BLUE;
static {
for (Color c : Color.values()) {}
}
}
```
This introduces a recursive dependency: the class initializer calls `Color.values` and the function
returns `Color.$VALUES` the value of which should be initialized in the class initializer.
To address the problem, this diff finds the value of `$VALUES` in its abstract memory when
`values` is called inside the class initializer.
Reviewed By: ezgicicek
Differential Revision: D18349281
fbshipit-source-id: 21766c20f
Summary:
The order was wrong: the map from procnames to node-ids was cleaned first, but to clean the map from node-ids to nodes, we need the id and we have already removed it.
The symptom was that effectively no new leaves are created by "removing" a node, so the call graph scheduler quickly devolves to the file-based one.
Reviewed By: skcho
Differential Revision: D18448209
fbshipit-source-id: f272a8112
Summary:
There was some over-general treatment of reachability, in anticipation of changes that didn't happen.
In particular, we only need to flag/remove single nodes, as they must be leaves to be scheduled,
therefore we never need to traverse their successors, because there aren't any.
Reviewed By: jvillard
Differential Revision: D18425905
fbshipit-source-id: b86490542
Summary:
- Convert `task_generator` into a module of `ProcessPool` and collect inside the two combinators which were in semi-random places.
- Make `SyntacticCallGraph` export a `task_generator` as opposed to a call-graph builder.
- Separate `target` type and put it in its own module to avoid dependency cycles.
Reviewed By: skcho
Differential Revision: D18425718
fbshipit-source-id: 7957edac8
Summary:
`typecheck_instr` is a function that essentially does most of nullsafe typechecking
work: it pattern matches the instruction and handles most of business logic (e.g. knowledge about builtins, rules of PropagatesNullable, flow-sensitive rule for condition branches etc etc etc.
This is a gigantic function consisting of huge amount of nested
function. No way it can fit in someone's head and it is super hard to
read. It also captures many things like node and node'.
This diff does fairly shallow work:
1. Moves most of nested subfunctions into top-level functions. It also
means that what was previously hiddenly captured is now made an explicit
dependency.
2. Some (minority) of them are renamed to better indicate the context.
3. Some (minority) of params are renamed to clear indicate the
difference.
4. Some params are made named params, especially booleans and params
that have the same types so could be confused.
5. In some placed, added bit more clear comments.
This diff DOES NOT do:
1. Tries to fully resolve confusion between cryptic names. In couple of places, instead of node'
and node we use node and original_node, which is barely better. But we
still have ugly things like typestate and typestate1 leaving together.
Baby steps!
2. Tries to create better or consistent names in functions. I did it for
most obvious cases, that's it.
3. Order or params is arbitrary. I just used the order that was easy to
come up with, no consistency here.
Reviewed By: artempyanykh
Differential Revision: D18425965
fbshipit-source-id: 7a775f08d
Summary:
This diff extends bound domain to express Min/Max of another bounds, so it can keep some more
precision in `Math.min/max`.
limitation: `MinMaxB`, the constructor of the bound, can contain only linear expressions or
previous min/max expressions.
Reviewed By: ezgicicek
Differential Revision: D18395365
fbshipit-source-id: fc90d27fd
Summary:
We still have few remaining places which we have a logic not encoded in
as a Nullability type. Ignoring third party param calls is one of them.
We don't want this behavior for strict mode.
Reviewed By: artempyanykh
Differential Revision: D18396639
fbshipit-source-id: dbfedc769
Summary:
The upcoming whole-program analysis will need to log reports in different source files simultaneously.
Here, the data structure containing the reports, and in charge of deduplication is generalised to
a map from source file to what it was previously. This way, writing out the reports is possible even
with multiple source files.
Reviewed By: skcho
Differential Revision: D18394994
fbshipit-source-id: 5f5ecc27c
Jules Villard
Sungkeun Cho
Mitya Lyubarskiy
Dulma Churchill
Josh Berdine
Anton Kochkov
Ezgi Çiçek
Nikos Gorogiannis
Scott Owens