Summary:
This was spammy, especially for errors which we already know about and are
caught by the frontend (then the error message would be displayed about a
translation error without context about what the error was).
Reviewed By: dulmarod
Differential Revision: D8640145
fbshipit-source-id: 8b8b8a7
Summary:
The motivation is in a following diff: ensuring symbols do not cross procedure boundaries.
- This diff rewrites `Bound.subst` to be based on the substituted bound rather than folding on the symbol map.
- This way we are sure all symbols are substituted and no symbols from another procedure remains in the result.
- All cases from the previous version should still be here, I think I added a few constant approximations of minmax substituted with minmax (that would be return Top).
Side-effects (good):
- `mult_const` has also more constant approximations for minmax,
- substitution should be faster
Reviewed By: jvillard
Differential Revision: D8369993
fbshipit-source-id: 6ed8be8
Summary:
This changes the behaviour back to before the "fork once then pipe new tasks
for each source files" era: before that we would fork once per source file,
which had the effect of emptying the caches for every source file. Without this
the caches can grow unchecked.
This is probably suboptimal but should at least be the same behaviour as before.
Reviewed By: jeremydubreil
Differential Revision: D8615124
fbshipit-source-id: 69fc101
Summary:
- Do not add actuals of a call as unstable.
- Replace access trie with simple set of paths, which is easier to debug/argue correct.
- Fix bug where a prefix path was searched, as opposed to a *proper* prefix.
- Restrict interface to the minimum so that alternative implementations are easier.
Reviewed By: ilyasergey
Differential Revision: D8573792
fbshipit-source-id: 4c4e174
Summary: This prevents the task bar from scrolling the terminal in case the lines are not wide enough. Instead it will truncate the display to the terminal size. Also display only the most useful info when there is not much room.
Reviewed By: jeremydubreil
Differential Revision: D8590580
fbshipit-source-id: e12d5c9
Summary: `make deadcode` complains about circular dependencies but it works. Document mystery and remove dead code that was introduced while the tests were broken.
Reviewed By: da319
Differential Revision: D8590961
fbshipit-source-id: b52e290
Summary:
Previously we would block indefinitely waiting for that child to send us an
update. Now errors in the child are caught and the main process dies, taking
everyone down with it.
When a child dies, it sends a "Crash" message to the parent, unless it died
receiving a signal (like a segmentation fault, or an external signal). In that
case, the OCaml runtime won't get a chance to notice its death and send the
"Crash" message. Thus, always check if some child has died from under us as
well.
Reviewed By: mbouaziz
Differential Revision: D8577095
fbshipit-source-id: 519992b
Summary: C/C++ code can, in some cases, generate a large number of temporary (Sil) variables. Since we are already not reporting races on these, not recording them gives some perf back.
Reviewed By: mbouaziz, jvillard
Differential Revision: D8566999
fbshipit-source-id: 148ac46
Summary: Trying to convert a large int literal to an OCaml int raises an exception. The use case here actually needed a float anyway, so add an API for that.
Reviewed By: jeremydubreil
Differential Revision: D8550410
fbshipit-source-id: 382495b
Summary:
We inline the .ml and the .mli together using the .cmi rule (for reasons
explained in the Makefile of deadcode). This relies on the fact that rules will
start from the .cmx, which in turns depends on the .cmi as the last dependency
and so all the dependencies of the .cmx are satisfied by the time we hit the
.cmi. But that doesn't always work.
For some reason, making the .cmi depend on its .cmx works, even though it's
supposed to include a circular dependency (`make` should complain but doesn't).
Oh, well...
Reviewed By: jeremydubreil
Differential Revision: D8548032
fbshipit-source-id: 0dc9335
Summary:
Replace the previous outputting of "." and "F" with an actual progress bar and
a multiline display of what procedure each process is currently busy analysing.
Observe:
```lang=text
Found 19 source files to analyze in /home/jul/code/openssl-1.1.0d/infer-out
7/19 [######################......................................] 36%
⊢ [ 1.14s] crypto/mem.c: CRYPTO_malloc
⊢ [ 1.68s] crypto/o_time.c: julian_adj
⊢ [ 0.50s] crypto/mem.c: CRYPTO_zalloc
⊢ [ 1.80s] crypto/o_str.c: OPENSSL_strlcpy
```
This works by setting up a worker pool (as before) that waits to receive jobs
(not as before: we used to fork for each new job). Unix pipes are used for
communication.
The new worker pool can be used to experiment with other concurrency models,
such as reviving per-procedure-parallelism, or making sure each procedure is
analysed only once.
Perf tests indicate that this version is no slower than the previous one,
either on laptops or devserver: about 3% worse user time but ~40% better system time.
This new version forks <jobs> processes whereas the previous version would
fork `O(number of source files)` times.
`infer -j 1` shows a progress bar that doesn't update timing info (because it
would need a second process to do that).
Reviewed By: mbouaziz
Differential Revision: D8517507
fbshipit-source-id: c8ca104
Summary:
The execution environment is really just a cache. It happens to point to a
particular source file which is where the analysis was started from, but that
is not relevant, and in fact is confusing because it suggests that it is
somewhat tied to that file. In reality, exe_env caches information about any
procedure and source file encountered by the analysis.
This will make it easier to make further changes but I think it also brings a
bit more clarity to the code.
Reviewed By: jeremydubreil
Differential Revision: D8513735
fbshipit-source-id: f4b38ce
Summary: Record that it is not supported: https://github.com/facebook/infer/issues/8
Reviewed By: mbouaziz, dulmarod
Differential Revision: D8442762
fbshipit-source-id: fa271cb
Summary: This makes more sense and avoids printing a pointless backtrace. Give the user some advice while we're at it.
Reviewed By: mbouaziz
Differential Revision: D8442711
fbshipit-source-id: 65a8939
Summary: It's been deprecated for a while now. Use `infer analyze` instead.
Reviewed By: dulmarod
Differential Revision: D8442682
fbshipit-source-id: 0b8c590
Summary:
I realized that control variable analysis was broken when we had multiple back-edges for the same loop. This is often the case when we have a switch statement combined with continue in a loop (see `test_switch` in `switch_continue.c`) or when we have disjunctive guards in do-while loops.
This diff fixes that by
- defining a loop by its loophead (the target of its backedges) rather than its back-edges. Then it converts back-edge list to a map from loop_head to sources of the loop's back-edges.
- collecting multiple guard nodes that come from potentially multiple exit nodes per loop head
In addition, it also removes the wrong assumption that an exit node belongs to a single loop head.
Reviewed By: mbouaziz
Differential Revision: D8398061
fbshipit-source-id: abaf288
Summary: Code auto generated by annotation processors or by the compiler is creating non-actionable reports, so skip it for now.
Reviewed By: jeremydubreil
Differential Revision: D8395781
fbshipit-source-id: 9832814
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8395399
fbshipit-source-id: b4bb48c
Summary:
We need to report on non-private methods (the opposite even leads to FPs sometimes on deadlocks). To do this, the domain needs to change so that the interpretation of an order pair `a,b` is no longer "lock `a` is taken in the *current method* and held until lock `b` is taken". Instead the meaning is now "lock `a` is taken in some method *of the same class with the current method* and is held until `b` is taken".
These changes are quite drastic because the previous implementation optimised extensively around the previous use case.
Reviewed By: mbouaziz
Differential Revision: D8395351
fbshipit-source-id: a2bd22b
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8394978
fbshipit-source-id: 671ccb0
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8379328
fbshipit-source-id: bc33983
Summary: Deadlocks can be very noisy, so dedup reports on same line by showing only the one with the shortest trace and a count of the suppressed ones.
Reviewed By: mbouaziz
Differential Revision: D8351148
fbshipit-source-id: 8913db2
Summary: We were missing reads of `a` if it was used in void cast, i.e. `(void) a;` This caused dead store false positives: we were not using `exp` that was the result of translating `a`. This diff creates a call to built-in skip function with `exp` as its argument, which causes the analyses to see reads of `exp`.
Reviewed By: mbouaziz
Differential Revision: D8332092
fbshipit-source-id: f3b0e10
Summary: Removing an internal error in SIL to HIL translation which I had added before to log how often the particular case was happening. It happens quite often, and I have a task to investigate the issue. Removing it as it spams the analysis output a lot.
Reviewed By: dulmarod
Differential Revision: D8316822
fbshipit-source-id: 4047cbe
Summary: Introduce an annotation that forces the summary of a method to be free of blocking events, without suppressing other reports.
Reviewed By: jeremydubreil
Differential Revision: D8276787
fbshipit-source-id: be9eed8
Summary: I don't understand what this function is for. Let's remove it.
Reviewed By: mbouaziz
Differential Revision: D8320839
fbshipit-source-id: eeb14f7
Summary: The case of nullable properties was already working but there was no test for it.
Reviewed By: dulmarod
Differential Revision: D8266468
fbshipit-source-id: c074d69
Summary:
`make doc` will use `jbuilder` (which in turn uses `odoc`) to generate the
documentation for infer's modules. This is useful to browse the APIs of infer
and gives a more discoverable place to host more general documentation about
infer's internals.
Besides the actual plumbing necessary to generate the docs, this diff also
- Moves the various infer/src/*/README.md to index.mld files that make it to the generated docs
- Fixes some doc comments that would anger `ocamldoc`
Closes#435
Reviewed By: mbouaziz
Differential Revision: D8314572
fbshipit-source-id: 4a5c70e
Summary: Create mechanism for suppressing starvation reports. To do that, refactor and expose a Checkers function.
Reviewed By: mbouaziz
Differential Revision: D8259583
fbshipit-source-id: f5b5a63
Summary: There is a number of dangling pointer dereference false positives coming from our treatment of union in c/cpp. For now, do not treat union fields as uninitialised.
Reviewed By: mbouaziz
Differential Revision: D8279802
fbshipit-source-id: a339b0e
Summary: We get a lot of false positives for union types as union fields are treated as separate memory locations at the moment. For now we do not treat union fields as uninitialised.
Reviewed By: mbouaziz
Differential Revision: D8277363
fbshipit-source-id: efe5b4a
Summary:
Now the result won't depend on the visit order of instructions
Depends on D8235834
Reviewed By: jeremydubreil
Differential Revision: D8235907
fbshipit-source-id: a6eb469
Summary:
Use the component of the abstract state `events` to report. This set contains reachability facts about blocking calls and lock acquisitions.
The other component, `order`, contained pairs of a reachable event `e'` from an event option with the semantics that if the option is `None` then we have an element that now goes into `events`, and if the option is `Some e` then the element represents a lock acquired and a trace *from* `e` to `e'`
Now, `order` can be simplified to proper pairs of events, without the option.
Reviewed By: jvillard
Differential Revision: D8227665
fbshipit-source-id: e6f4dac
Summary:
Having the `Node` module including in the `CFG` one is confusing.
Let's keep it separate.
Reviewed By: ngorogiannis
Differential Revision: D8185754
fbshipit-source-id: 62077e6
Summary:
It's useful to test that the bucket a given error is classified as doesn't
change over time without notice.
This records the bucket for *all* the tests, even though some never produce a
bucket. This is to be on the safe size instead of risking to forget adding the
bucket information when the test changes, or when copy/pasting from a test that
doesn't have buckets to one that does.
The implementation is pretty crude: it greps the beginning of the qualifier
string for a `[bucket]`.
Reviewed By: mbouaziz
Differential Revision: D8236393
fbshipit-source-id: b3b1eb9
Summary: That name doesn't make sense anymore and could be confusing.
Reviewed By: mbouaziz
Differential Revision: D8235507
fbshipit-source-id: b6a6e71
Summary:
Forcing integration with `--force-integration` would only work for some
integrations that stayed in OCaml-land. This propagetes the forcing to
infer.py.
Also remove some unused options on the Python side, and add more debug
information.
Fixes#927
Reviewed By: mbouaziz
Differential Revision: D8235504
fbshipit-source-id: 1d98543
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary: To simplify things, have a separate set of simple trace->event elements. Currently this is not used for reporting, in preparation for another diff.
Reviewed By: mbouaziz
Differential Revision: D8203721
fbshipit-source-id: ecc8bae
Summary:
For now: just moving this list behind an abstract type.
Next: changing the internal representation.
Reviewed By: ngorogiannis
Differential Revision: D8140926
fbshipit-source-id: 5b959b0
Summary:
`IList.map_changed` relies on `take_append`.
The existing code was a `take_rev_append` instead.
Fixed it.
Tests are still passing, we might want to look at callsites and consider a `map_changed_unordered`.
Reviewed By: jvillard
Differential Revision: D8201187
fbshipit-source-id: 151b95c
Summary: In preparation for allowing unbalanced locking, we need the lock state in the summary.
Reviewed By: mbouaziz
Differential Revision: D8201932
fbshipit-source-id: 05a1b38
Summary:
Preparing for the future change, we won't see instructions as lists but as an abstract type.
This change may be a very minor perf regression: does a few more (but bounded by a constant) instructions traversals only for the nodes involving a Printf-like function call, only for the PrintfArgs checker...
Reviewed By: jvillard
Differential Revision: D8094124
fbshipit-source-id: e2e2c5e
Summary:
We never really need the list of nodes/succs/preds, we only need to fold over them.
This will reduce garbage for computed lists like in the Exceptional CFG or the OneInstrPerNode CFG.
Reviewed By: ngorogiannis
Differential Revision: D8185665
fbshipit-source-id: d042beb
Summary: In preparation to change the underlying module structure so as to allow three-point traces (call-site, intermediate call-site and endpoint), rename modules to better reflect function plus use records vs pairs of pairs :P
Reviewed By: mbouaziz
Differential Revision: D8187369
fbshipit-source-id: ed3e4ac
Summary:
There can be multiple reports per line, especially when calling in a method which has itself multiple reports.
When reporting at the callsite, report only the issue with the highest severity (picked manually per type of event).
Deadlocks are not de-duplicated, as they are relatively rare and the info in mupltiple reports may be important.
Reviewed By: mbouaziz
Differential Revision: D8160940
fbshipit-source-id: ea6a5c0
Summary:
The main motivation is preparing for a future change.
This also reduces lifetime of potential garbage.
Reviewed By: jeremydubreil
Differential Revision: D8185648
fbshipit-source-id: 6d0a568
Summary:
Append can be costly, let's do it once only.
Depends on D8185619
Reviewed By: jeremydubreil
Differential Revision: D8185634
fbshipit-source-id: 67f84a9
Summary:
Rely on the underlying CFG preds:
- perf: no need to append lists
- correctness: the underlying CFG may be removing duplicates
Reviewed By: ngorogiannis
Differential Revision: D8185638
fbshipit-source-id: 3b6f70a
Summary:
- do not `List.rev` for `List.last`
- `List.rev_filter_map` rather than `filter |> map |> rev`
Reviewed By: da319
Differential Revision: D8185619
fbshipit-source-id: aeb41a4
Summary: The order of nodes means nothing, and should not matter, let's save the whales!
Reviewed By: ngorogiannis
Differential Revision: D8182137
fbshipit-source-id: bc14a2c
Summary:
Moving away from C++ include-based models means that we cannot reliably detect
anymore whether a file includes <iostream> or not. In order not to be too
spammy, let's always assume standard streams are initialized for now when the
include models are off.
Recent versions of libstdc++ make these models redundant so there is hope that in a
bright future the analysis of std streams initialisation will work correctly without infer
having to have its own models anyway.
Reviewed By: mbouaziz
Differential Revision: D8043467
fbshipit-source-id: d118043
Summary: Prevent the analysis to default to absolute paths which would invalidate the cache.
Reviewed By: mbouaziz
Differential Revision: D6997490
fbshipit-source-id: 3c17658
Summary: We want both pointer and pointer dereference to be uninitialised at the beginning. Forgot to add the expression of type pointer when updating the analysis from access paths to access expressions.
Reviewed By: ddino
Differential Revision: D8117011
fbshipit-source-id: 534f7ef
Summary: Set arguments of pointer type as initialised for indirect function calls.
Reviewed By: mbouaziz
Differential Revision: D8097895
fbshipit-source-id: 830f568
Summary: Track and surface the reasons why a method is assessed to run on the UI thread.
Reviewed By: mbouaziz
Differential Revision: D8096099
fbshipit-source-id: 2403c6c
Summary:
The reported location was always the start of the enclosing procedure, which is wrong in many ways.
A nice side-effect is that some code can then be eliminated and Ondemand.analyze used, avoiding getting the procdescs in the process.
Reviewed By: jeremydubreil
Differential Revision: D8056306
fbshipit-source-id: 67c2c8d
Summary: Treat array accesses as initialised if they are passed by reference.
Reviewed By: jvillard
Differential Revision: D8071247
fbshipit-source-id: 5480e90
Summary: The type of array element is not preserved correctly in the translation from SIL to HIL. When array element is passed by a reference, i.e. `f(&(array[0]))`, the type of array element gets the type of a pointer of array element.
Reviewed By: jvillard
Differential Revision: D8071188
fbshipit-source-id: 3e6635e
Summary:
The deadcode checker is poorly written and as a result is more useful than
intended!
Reviewed By: mbouaziz
Differential Revision: D8088654
fbshipit-source-id: 19a94b8
Summary: Use AccessExpressions instead of AccessPath in uninit analysis. This will allow us to distinguish between pointers and their dereferences.
Reviewed By: jvillard
Differential Revision: D8042359
fbshipit-source-id: 604bcbc
Summary:
It improves the precision of widening operations of interval:
upper_bound_widen (min(n, s), s) = s
lower_bound_widen (max(n, s), s) = s
Reviewed By: mbouaziz
Differential Revision: D8038941
fbshipit-source-id: 61b10cb
Summary:
Labels inside switch statements were causing havoc (see test), and the translation of switch statements in general could be improved to handle more cases.
It turns out that `case` (and `default`) statements are more or less fancy labels into the code. In other words, if you erase all the `case XXX:` and `default:` strings in the `switch` statement you get the real structure of the program, and `switch` just jumps straight to the first `case` directives (and to the second if the first one is not satisfied, etc. until all `case`/`default` have been considered).
This suggests an alternative implementation: translate the body of the `switch` and simply record the list of switch cases inside that body, along with where they point to. Then post-process this list to construct the control flow of the `switch`, which points into the control-flow of the `body`. In order not to modify every function in `CTrans` to propagate the current list of cases, I created an ugly `ref` inside `SwitchCase` instead (but it cannot be directly accessed and it's guaranteed to be well-parenthesised wrt nested switches by the `SwitchCase` API so it's not too bad).
[unrelated] Also make translation failures output more information about what exactly in the source code is causing the crash, and the ancestors in the AST that lead to the crash site.
Reviewed By: martinoluca
Differential Revision: D8011046
fbshipit-source-id: 8455090
Summary: Moving this function since it's about a single procdesc. Slight rewrite too.
Reviewed By: da319
Differential Revision: D8030494
fbshipit-source-id: f7cc58e
Summary:
- Reorder modules in mli for readability.
- Match mli module order in the implementation.
- Move some functions that operate on domains from RacerD.ml to the domain file.
- Kill some module type invocation.
- Use standard module signatures.
Reviewed By: mbouaziz
Differential Revision: D8026386
fbshipit-source-id: ee2af22
Summary: Method overloading creates the potential for report duplication even though the reports are actually distinct. Make the report message unique by not using shortened method names.
Reviewed By: jeremydubreil
Differential Revision: D8005862
fbshipit-source-id: 53d8ea0
Summary: Follow C++ in having local variables owned plus silence reports on paths rooted on logical vars. We need both because when propagating ownership from right to left, the initial status of a temp var as owned is lost.
Reviewed By: sblackshear
Differential Revision: D7988575
fbshipit-source-id: 2e817d7
Summary: There was a bit of code and comments referring to potential soundness. Kill those.
Reviewed By: da319
Differential Revision: D8004256
fbshipit-source-id: c20b62a
Summary:
Preparing for bigger changes...
- Rename `payload` field to `payloads`
- Move `payload` type to `Payloads.t`
- `SummaryPayload`s only have to implement a change on `Payloads.t` rather than `Summary.t`
Reviewed By: sblackshear
Differential Revision: D7987211
fbshipit-source-id: c9d7a74
Summary: Fixing the support for single core analysis in 8ce79a0613 was improving the performance of the genrule-based integration by more that 2X. Running Infer in single core more with the external compiler integration for Buck also improves the performance significantly.
Reviewed By: mbouaziz
Differential Revision: D7989255
fbshipit-source-id: 71fb842
Summary:
This diff:
- translates C++ `catch` blocks
- adds an exceptional control-flow edge from the end of a `try` block to the beginning of a `catch` block
This obviously doesn't reflect the way exceptions actually work, but I think it is better than what we have now. For one thing, we'll see/translate code inside `catch` blocks, which were opaque before. If Clang analyses don't want this behavior, they can simply use `ProcCfg.Normal` (which, up until this diff, behaved identically to `ProcCfg.Exceptional`.
In the future, we can extend `trans_state` to track blocks that might throw an exception, and have each of these blocks transition to `catch` instead.
Reviewed By: jvillard
Differential Revision: D7814521
fbshipit-source-id: 67b86a6
Summary:
- delete getter for `CContext.context.procdesc`
- change API of `CLocation`, in particular to take just a source file instead of a `CContext` since that's all they need (but maybe we'd rather type less?)
- thread `source_range` of source statement to where useful for logging (could do more in the future)
Reviewed By: da319
Differential Revision: D7950573
fbshipit-source-id: 2755f7d
Summary: Makes sense given that they share a lot of the same `Intent`-related sinks.
Reviewed By: mbouaziz
Differential Revision: D7877282
fbshipit-source-id: 38b2040
Summary:
Before we were computing the size of an abstract state (`range`) using the `NonNegativeBound` domain but it wasn't able to express product of symbolic values.
This diff introduces a domain for that.
The range of an interval is still computed in `NonNegativeBound` but then the product is done in `TopLiftedPolynomial` so all costs end up being of that type.
The //symbols// of a polynomial are `NonNegativeBound` (so the polynomial only represent non-negative values, perfect for a cost), which handles substitution correctly, i.e. it gives zero instead of negative values.
Reviewed By: ddino
Differential Revision: D7397229
fbshipit-source-id: 6868bb7
Summary:
The annotation UiThread can, and is, used on classes as opposed to just methods, so extend the modelling to account for this.
Also, consider the annotation hereditary.
Reviewed By: jeremydubreil
Differential Revision: D7910762
fbshipit-source-id: 0df2c81
Summary:
Java arrays have an internal length that can be retrieved with the internal `__get_array_length`.
Here is a model for it.
Reviewed By: jvillard
Differential Revision: D7931572
fbshipit-source-id: fd4c179
Summary:
Attempt at a better naming scheme:
- `Specs.summary` are now `Summary.t`. The `Summary` module (replacing `Specs`) contains the summary of a procedure: the results of all the analyses, etc.
- `Summary.ml` is now `SummaryPayload.ml`. This concerns how each (AI) analysis extracts its payload from the master summary.
- Accordingly, checkers now define a `Payload` module where previously they defined a `Summary` module. The type is also cleaned up to use `t` instead of `payload`, etc.
- Cleaned up some names as a result, for instance `Specs.get_summary` -> `Summary.get`, etc.
Reviewed By: ngorogiannis
Differential Revision: D7935883
fbshipit-source-id: 1766545
Summary:
Move the biabduction-specific payloads (the "`'a spec`" stuff) from specs.ml
into a new `BiabductinoSummary` module, similar to other checkers.
Reviewed By: ngorogiannis
Differential Revision: D7935815
fbshipit-source-id: bdff3b9
Summary:
Previously, the type of `trans_result` contained a list of SIL expressions.
However, most of the time we expect to get exactly one, and getting a different
number is a soft(!) error, usually returning `-1`.
This splits `trans_result` into `control`, which contains the information
needed for temporary computation (hence when we don't necessarily know the
return value yet), and a new version of `trans_result` that includes `control`,
the previous `exps` list but replaced by a single `return` expression instead,
and a couple other values that made sense to move out of `control`. This allows
some flexibility in the frontend compared to enforcing exactly one return
expression always: if they are not known yet we stick to `control` instead (see
eg `compute_controls_to_parent`).
This creates more garbage temporary identifiers, however they do not show up in
the final cfg. Instead, we see that temporary IDs are now often not
consecutive...
The most painful complication is in the treatment of `DeclRefExpr`, which was
actually returning *two* expressions: the method name and the `this` object.
Now the method name is a separate (optional) field in `trans_result`.
Reviewed By: mbouaziz
Differential Revision: D7881088
fbshipit-source-id: 41ad3b5
Summary: When passing `--genrule-mode` option, Infer will remove the logs and the other kind of data that are not compatible with the Buck distributed cache.
Reviewed By: mbouaziz
Differential Revision: D7943346
fbshipit-source-id: 4e7ca4d
Summary: With the genrule approach, the directory the generated script is run from is inside `buck-out`. So we need to specify the project root before calling the `buck` command.
Reviewed By: mbouaziz
Differential Revision: D7938130
fbshipit-source-id: c265476
Summary: It seems that we don't need to rely on `make` anymore as the internal process manager is working fine on Buck Java projects.
Reviewed By: jvillard
Differential Revision: D7903639
fbshipit-source-id: 9b32f05
Summary:
This is an attempt to make things more consistent, and maybe save some work
from the `Format` module in case flambda doesn't have our backs.
Reviewed By: jberdine
Differential Revision: D7775496
fbshipit-source-id: 59a6314
Summary: Make errors stand out with colours. Also improve error messages around save states.
Reviewed By: mbouaziz
Differential Revision: D7928794
fbshipit-source-id: c81cfe2
Summary: Without the class name, it is not always clear from the error message where the method expecing non-null parameters defined.
Reviewed By: mbouaziz
Differential Revision: D7919492
fbshipit-source-id: 044fb83
Summary: I needed it for debugging but, to my dismay, it was borked again. This time it was because `jbuilder` moved the object files to another directory since the last jbuilder update.
Reviewed By: mbouaziz
Differential Revision: D7926267
fbshipit-source-id: 42ad26a
Summary:
Make the starvation checker enabled by default.
Add a deadlock issue type, distinct to starvation, which will be kept for UI thread starvation.
Add checks so that checker will do nothing on non-Java code.
Reviewed By: mbouaziz, ddino
Differential Revision: D7908381
fbshipit-source-id: 889f373
Summary: Historically, this option was only used to parallelize the biabduction analysis, which is now run using the checkers framework.
Reviewed By: jvillard
Differential Revision: D7895118
fbshipit-source-id: 2a54bca
Summary: Calling Future.get from UI thread, or under a lock the UI thread may try to take has been associated with ANRs.
Reviewed By: ddino
Differential Revision: D7859296
fbshipit-source-id: b87bd94
Summary:
One source of non-determinism is racing on procedure summaries when reporting. In particular, the summary of a method may be computed and stored by one thread, but another may be trying to report on it (eg, in cluster checkers).
One solution (at least until everything is in sqlite) is to have separate files just for the reports, a la linters. This diff improves the interface of LintIssues and generalises it ahead of using it in other analysers.
Reviewed By: jeremydubreil
Differential Revision: D7859973
fbshipit-source-id: 8672d3b
Summary: Folly has a macro SYNCHRONIZED(..) {...} which boils down to the creation/destruction of a LockedPtr object, doing the locking/unlocking. Add support for that.
Reviewed By: sblackshear
Differential Revision: D7844847
fbshipit-source-id: c7a146d
Summary: std::lock allows for locking multiple lockable objects, while avoiding deadlock. This will fix some FPs in C++.
Reviewed By: da319
Differential Revision: D7844198
fbshipit-source-id: 2b7140a
Summary:
We had a semantics for ownership of prefix paths in mind (see comment), but it was enforced partially in the domain and partially in the transfer functions.
Moving all of the logic into the domain makes things much cleaner/shorter.
Reviewed By: ngorogiannis
Differential Revision: D7845981
fbshipit-source-id: 4a2da95
Summary:
The Cost analysis uses `Bound` for non-negative values only, let's make it a separate module (and abstract type).
This also separates the abstract domain part of `Bound` which we wanted anyway.
Depends on D7844267
Depends on D7843351
Depends on D7782184
Reviewed By: ddino
Differential Revision: D7844572
fbshipit-source-id: 0e6b620
Summary: We were wrongly using the underapproximation of `min` rather than the overapproximation
Reviewed By: ddino
Differential Revision: D7844267
fbshipit-source-id: c9d9247
Martin Trojer
Jules Villard
Dulma Churchill
Mehdi Bouaziz
Ezgi Çiçek
Daiva Naudziuniene
Nikos Gorogiannis
Jeremy Dubreil
Sungkeun Cho
Martino Luca
Dino Distefano
Brandon Kieft
Sam Blackshear
Jose Blanco
Oliver Castillo