Summary: As long as the types match, it should be possible to call build on two components that are created at different locations.
Reviewed By: skcho
Differential Revision: D18881740
fbshipit-source-id: 356f9e168
Summary: Add a FN that is detected by the old domain but not the new one
Reviewed By: ngorogiannis
Differential Revision: D18854389
fbshipit-source-id: 9bdc90a6b
Summary: The map from `CreatedLocation` to `MethodCalls` already takes care of the association from create methods to their set props. `MethodCall` comparison should be oblivious the the receiver, otherwise, we risk mistakenly considering two props set at different locations as different.
Reviewed By: skcho
Differential Revision: D18829388
fbshipit-source-id: b5a0d628d
Summary: This diff check and report on every nodes. Problem of the previous design is that it has to report alarms only with the abstract memory of the exit node. However, the new abstract value becomes imprecise at every join points on the path to the exit node, since it is using inverted map, i.e., under-approximation on collecting called methods. As a solution, this diff report on every nodes where `.build` is called with the abstract memory at that node.
Reviewed By: ezgicicek
Differential Revision: D18809449
fbshipit-source-id: 4fd6165d1
Summary: Current method call comparison is too strong. As exemplified with the new test, one can also set the required prop by calling a version which contains the suffixes. The domain should take care of such cases now.
Reviewed By: skcho
Differential Revision: D18808869
fbshipit-source-id: 9f7672e75
Summary: This diff checks litho condition on the new abstract value. This is triggered with `--new-litho-domain`, but it is intra-procedural as of now.
Reviewed By: ezgicicek
Differential Revision: D18783203
fbshipit-source-id: 98570104e
Summary:
Also add logic for recognising excessive timeouts. Refactor the code
around timeouts a little.
Reviewed By: artempyanykh
Differential Revision: D18807836
fbshipit-source-id: df5a1b566
Summary:
`Object.wait()` must be called on a locked monitor and it releases the
lock immediately, as far as other threads are concerned
(it also magically re-takes the lock when the monitor is `notified`).
Starvation can only occur if the UI thread is waiting
a lock that is distinct to that being waited on.
The check present was over-approximate in that it was checking that there exists a lock held by the UI thread and the thread issuing the `wait`, but did not make sure that lock was *not* the one waited on.
Amusingly, the e2e test was correct, but the reporting code wasn't.
Reviewed By: dulmarod
Differential Revision: D18782919
fbshipit-source-id: b3b98239e
Summary: Similar to constructor established attributes, we do the same here for static initializers. That is, attributes of static properties are injected into the initial state of every method.
Reviewed By: ezgicicek
Differential Revision: D18763192
fbshipit-source-id: 3879a27c5
Summary: This diff extends the bound domain to express multiplication of bounds in some simple cases.
Reviewed By: ezgicicek
Differential Revision: D18745246
fbshipit-source-id: 4f2dcb42c
Summary:
One standard way to schedule work is by starting a thread. We treat this by
- Treating invocations of `start` on a receiver with the `Runnable _` attribute as scheduling that runnable for parallel execution in the background (as opposed to on the UI thread).
- If `start` is used on an object of a subclass of `Thread` everything already works thanks to the `get_exp_attributes` function which will implicitly ascribe to an expression the attribute `Runnable _` if the expression points to an object with a known `run` method. This will even take care of some degree of dynamic dispatch, yay!
- If `start` is used on a `Thread` object which has been created with a constructor call provided with a `Runnable` argument, we have to appropriately model that constructor call, which is what is done in `do_call`.
Reviewed By: jvillard
Differential Revision: D18726676
fbshipit-source-id: 0bd83c28e
Summary:
A current blind spot is when object construction stores specific executors / runnables to object fields, which are then never mutated and accessed from normal methods. IOW the attributes established in the constructor are necessary to report properly inside a normal method (assuming these attributes are not invalidated by method code).
To achieve this, first we retain a subset of the final state attributes in the summary (only those that affect instance variables, in constructor methods). Then, when we analyse a non-constructor method:
- we analyse all constructors
- remove all attributes from the attribute map whose key is not an expression of the form `this.x. ...`
- re-localise all remaining keys so that they appear as rooted in the `this` local variable of the current procedure
- join (intersect) all such attribute maps
- use the result in place of initial state as far as the attribute map is concerned for the analysis of the current procedure, which can now start.
This means we can catch idioms that use side-effectful initialisation for configuring certain object fields like executors or runnables.
Reviewed By: jvillard
Differential Revision: D18707890
fbshipit-source-id: 42ac6108f
Summary: Another way to schedule work in android is by posting it to a `Handler`. A handler can be constructed out of the main looper, which forces it to schedule work on the UI thread. To model all this, we add syntactic models for getting the main looper and for creating handlers, and dataflow attributes for tracking that an expression is a looper/the main looper, or a handler constructed out of a looper.
Reviewed By: skcho
Differential Revision: D18706768
fbshipit-source-id: 7c46e6913
Summary:
This gets rid of false positives when something invalid (eg null) is
passed by reference to an initialisation function. Havoc'ing what the
contents of the pointer to results in being optimistic about said
contents in the future.
Also surprisingly gets rid of some FNs (which means it can also
introduce FPs) in the `std::atomic` tests because a path condition
becomes feasible with havoc'ing.
There's a slight refinement possible where we don't havoc pointers to
const but that's more involved and left as future work.
Reviewed By: skcho
Differential Revision: D18726203
fbshipit-source-id: 264b5daeb
Summary:
This diff fixes the model of substring.
Problem: The cost model of the substring function was to return `size of string - start index` as a
cost. However, sometimes this was a negative number, because of state abstractions on paths, array
elements, call contexts, etc, which caused an exception inadvertently.
This diff changes the model to return just `size of string`, when it cannot say `size of string` is
bigger than `start index`.
Reviewed By: ezgicicek
Differential Revision: D18707954
fbshipit-source-id: 63f27e461
Summary:
Instead of trying to figure out what runnable is directly passed to an executor,
use attributes to track the flow of a runnable. This has several advantages:
- Can track runnables across function return values.
- Can somewhat overcome the information loss under dynamic dispatch.
- Unifies handling with other attributes.
Reviewed By: skcho
Differential Revision: D18672676
fbshipit-source-id: a06a0e6ff
Summary:
- Unify treatment of modelled and annotated executors by making things go through attributes.
- Add a return attribute to summaries, so that we can track flows of thread guards/executors/future stuff through returned values.
- Dispatch modeled functions to model summaries.
This will help in following diffs where runnables will also go through attributes.
Reviewed By: skcho
Differential Revision: D18660185
fbshipit-source-id: e26b1083e
Summary: When we see a call to schedule some work on an executor and we don't have evidence that it is on some specific thread (UI/BG), instead of dropping the work, assign it `UnknownThread` and treat it as running on the background by default.
Reviewed By: jvillard
Differential Revision: D18615649
fbshipit-source-id: e8bad64b6
Summary: Following D18351867, this diff adds more size alias: when initial array size is one.
Reviewed By: ezgicicek
Differential Revision: D18530598
fbshipit-source-id: 26d57fe30
Summary:
Now we point to the root cause of the problem, and also provide
actionable way to solve the issue
Reviewed By: artempyanykh
Differential Revision: D18575650
fbshipit-source-id: ba4884fe1
Summary:
Two goals:
1. Be less assertive when speaking about third party code (it might be
written with different conventions).
2. Point to third party signatures folder so the users know how to
proceed
Reviewed By: artempyanykh
Differential Revision: D18571514
fbshipit-source-id: 854d6e746
Summary:
1/ We now support messaging for third-party: show file name and line
number
2/ We did not show information about internal models in case of param
calls
3/ Small change: we don't specify "modelTables.ml" anymore: no need to
expose implementation details
Reviewed By: artempyanykh
Differential Revision: D18569790
fbshipit-source-id: 28586c8ff
Summary:
Whole bunch of changes aimed to make error messages more clear and
concise.
1/ Wording and language is unified. We make errors sound more like a
type system violations, rather than linter reccomendations.
Particularly, we refrain from saying things like "may be null" - this is
a linter-style statement that may provoke discussions (what if the
developer knows it can not be null in this particular case).
Instead, we refer to declared nullability and nullability of actual values. This way, it is more clear that this is not a heuristic, this is how rules of a type-system work.
2/ Additionally, we drop things like field class in places when the
context should be clear by who looks at the error. We expect the user
sees the code and the error caption. So e.g. we don't repeat the word "field"
twice.
3/ In cases when we are able to retrieve formal param name, we include it for
usability.
4/ For Field not initialized error, we refer to Initializer methods:
this is a non-obvious but important nullsafe feature.
Reviewed By: artempyanykh
Differential Revision: D18569762
fbshipit-source-id: 9221d7102
Summary:
It make the message bit less heavy, and also it is kind of obvious that
it is origin.
In follow up diffs we will change the text so it is hopefully even more
obvious.
Reviewed By: artempyanykh
Differential Revision: D18527695
fbshipit-source-id: a305d547b
Summary:
1. We don't want to teach the users to ignore noise origin because
sometimes we are going to render something useful for them.
2. It just looks not cool.
Reviewed By: artempyanykh
Differential Revision: D18527694
fbshipit-source-id: 0ea248122
Summary: Android may spontaneously call these methods on the UI thread, so recognize the fact.
Reviewed By: ezgicicek
Differential Revision: D18530477
fbshipit-source-id: a8a798779
Summary:
First step towards a global analysis. A new command line flag activates the step in `Driver`.
The whole-program analysis is a simple, quadratic (inefficient-as-yet), iteration over all domain elements. However, it is restricted to those elements that are explicitly scheduled to run.
Reviewed By: skcho
Differential Revision: D17787441
fbshipit-source-id: 9fecd766c
Summary:
This diff avoids unqualified variables by `ItvUpdatedBy` are qualified later. For example,
```
z = x & y;
z = z + 1;
```
While `z` should not be selected as a control variable, it wasn't, because it was qualified by the addition. This pattern introduces FPs in many cases.
Reviewed By: ngorogiannis
Differential Revision: D18505894
fbshipit-source-id: 13aec3008
Summary:
This diff excludes integer variables from control variables when their values are calculated by
binary operators.
Reviewed By: ezgicicek
Differential Revision: D18505826
fbshipit-source-id: 710533d4c
Summary:
There was a precision loss during the substitution of array block. For example:
Callee's abstract memory includes an array block as follows, where `a` is a parameter.
```
a.elements -> { a.elements[*] with a.elements.size }
```
Callers' abstract memory includes a pointer that may point to multiple array blocks.
```
c -> { x, y }
x.elements -> { x.elements[*] with x.elements.size }
y.elements -> { y.elements[*] with y.elements.size }
```
When the callee is called with the parameter `c`, the callees memory is substituted to:
```
x.elements -> { x.elements[*] with top , y.elements[*] with top }
y.elements -> { x.elements[*] with top , y.elements[*] with top }
```
because `a.elements[*]` was substituted to `{ x.elements[*] , y.elements[*] }`
and `a.elements.size` was substituted to `top ( = x.elements.size join y.elements.size )`.
This diff tries to keep the precision in the specific case, not to join the sizes of array blocks.
So now the same callee's abstract memory is substituted to:
```
x.elements -> { x.elements[*] with x.elements.size }
y.elements -> { y.elements[*] with y.elements.size }
```
Reviewed By: ngorogiannis
Differential Revision: D18480585
fbshipit-source-id: b70e63c22
Summary: Due to the weakness of the analysis which can't detect side-effecting prop setting (e.g. as in `builder.prop1(..)`), we currently have many broken chains that do do have any `create` method in their prefixes. Let's not report on these broken chains.
Reviewed By: skcho
Differential Revision: D18503523
fbshipit-source-id: 7506e34b7
Summary:
In some apps executors are obtained by calling standard framework methods (and not by using DI with annotations).
To treat this style, we need to
- Detect calls that return such executors (`do_executor_effect`) and tag the return result with an `Attribute` indicating that it is now an executor, plus what thread it uses.
- Use that information when calling `execute`, to resolve the executor, if any, and its thread (in `do_work_scheduling` via `AttributeDomain.get_executor_constraint`).
- All this requires a new domain component, mapping variables to attributes. This extends the component previously used for remembering whether a variable is the result of a check on whether we run on the UI thread.
At the same time, I un-nested some functions from the transfer function for readability.
Reviewed By: skcho
Differential Revision: D18476122
fbshipit-source-id: bc39b5c2f
Summary:
We consider Java collections to be like c++ std::vectors and add models for
- `Collections.get(..)`
- `__cast`
Reviewed By: skcho
Differential Revision: D18449607
fbshipit-source-id: 448206c84
Summary: `equals1` and `equals2` in `SafeInvertedMap.join` are references that indicate whether given parameters and the result is physically equal or not. This diff fixes a missing update of them.
Reviewed By: ezgicicek
Differential Revision: D18450680
fbshipit-source-id: bae19cbe9
Summary:
It returns non-top value when one of the parameters of band is positive, i.e., `x & 255` returns
`[0, 255]` instead of top.
Reviewed By: ezgicicek
Differential Revision: D18448614
fbshipit-source-id: aaa298a66
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Summary:
This diff tries more narrowing during analysis in order to get preciser results on nested loops.
In the widening phase, it does narrowing a loop right after its widening, for each loops. In general, this may make the widening phase non-terminating because it keeps the abstract state from monotonely increasing to the fixed point in a finite number of iterations. To avoid that situation, this diff applies the narrowing only when the first visit of the loop in the widening phase.
Reviewed By: ngorogiannis
Differential Revision: D18400631
fbshipit-source-id: cc76f7e85
Summary: Sometimes there is a code like `for(int i = 1; i < x; i++){ l.add(); }`, where the first element in a list is addressed specifically. This case was not analyzed precisely, because the alias value is added only when `i` is initialized by 0 by heuristic. This diff extends the heuristic, so it adds a size alias between `i` and `l.size()` when `i` is initialized by 0 or 1.
Reviewed By: ezgicicek
Differential Revision: D18351867
fbshipit-source-id: e7d19a4ec
Summary:
This diff adds semantics of Java function calls of enum `values` inside class initializers.
* Java class initializer function initializes a specific field `$VALUES`, which points to the list
of enum values.
* The `values` function of enum class returns the value of `$VALUES`.
The problem is when the `values` function is called inside the class initializer, for example:
```
enum Color {
RED,
GREEN,
BLUE;
static {
for (Color c : Color.values()) {}
}
}
```
This introduces a recursive dependency: the class initializer calls `Color.values` and the function
returns `Color.$VALUES` the value of which should be initialized in the class initializer.
To address the problem, this diff finds the value of `$VALUES` in its abstract memory when
`values` is called inside the class initializer.
Reviewed By: ezgicicek
Differential Revision: D18349281
fbshipit-source-id: 21766c20f
Summary:
This diff extends bound domain to express Min/Max of another bounds, so it can keep some more
precision in `Math.min/max`.
limitation: `MinMaxB`, the constructor of the bound, can contain only linear expressions or
previous min/max expressions.
Reviewed By: ezgicicek
Differential Revision: D18395365
fbshipit-source-id: fc90d27fd
Summary: Capture locations where work is scheduled to run in parallel (here, just Executors). Also add a test file with cases the upcoming whole-program analysis for starvation should catch.
Reviewed By: dulmarod
Differential Revision: D18346880
fbshipit-source-id: 57411b052
Summary: Follow ups will include error messaging that makes the choice clear
Reviewed By: artempyanykh
Differential Revision: D18347664
fbshipit-source-id: b6f005726
Summary:
In this diff, we just load the info from the storage. Next diff will be
actually using this information to infer nullability.
`ThirdPartyAnnotationGlobalRepo.get_repo` will be used in the next diff,
hence #skipdeadcode
Reviewed By: artempyanykh
Differential Revision: D18347647
fbshipit-source-id: 82a9223c6
Summary:
This diff extends the alias domain, so each variable can have multiple aliases.
It changed `KeyLhs` can be mapped to multiple alias targets in the `AliasMap` domain:
```
before : KeyLhs.t -> KeyRhs.t * AliasTarget.t
after : KeyLhs.t -> KeyRhs.t -> AliasTarget.t
```
Reviewed By: ezgicicek
Differential Revision: D18062178
fbshipit-source-id: b325a6055
Summary:
Add precision to analysis by elaborating the thread-status domain. This is done by having unknown (bottom), UI, BG or Any (both/top) elements in the lattice. This way, when we branch on thread-identity (if I am on UI thread do this, otherwise do that), we know that in one branch we are on UI thread and on the other we are *not* on the UI thread (BG thread), where previously the other branch would just go to top.
With this knowledge we can throw away pairs that come from callees which run on a thread that is impossible, given the current caller thread identity. This can happen when annotations are used incorrectly, and since this is the purview of annot-reachability, we just drop those pairs entirely.
Reviewed By: skcho
Differential Revision: D18202175
fbshipit-source-id: be604054e
Summary:
Steal a page from RacerD (and improve interface of) on using certain calls to assert
execution on a particular thread. Reduces FPs and FNs too.
Reviewed By: dulmarod
Differential Revision: D18199843
fbshipit-source-id: 5bdff0dfe
Summary:
The zero cost of node does not make sense especially when the abstract memory is non-bottom. This
resulted in unreasonable zero cost results sometimes, e.g. when the checker could not find
appropriate control varaibles having interval values of iteration. This diff fixes this, so sets
the minimum basic cost as 1, if the abstract memory at the node is non-bottom.
Reviewed By: ezgicicek
Differential Revision: D18199291
fbshipit-source-id: b215d10e5
Summary:
Primitive types are not annotated. Because of that, we used to implicitly derive
`DeclaredNonnull` type for them. This worked fine, but this leads to errors in Strict mode, which does
not believe DeclaredNonnull type.
Now lets offifically teach nullsafe that primitive types are
non-nullable.
Reviewed By: jvillard
Differential Revision: D18114623
fbshipit-source-id: 227217931
Summary: It is now possible to push the thread status into each critical pair. This leads to higher precision, because when code branches on whether it is on the UI thread, the final abstract state of the procedure will be `AnyThread`, but pairs created in the UI thread branch should know that their status is `UIThread`, not `AnyThread`.
Reviewed By: jvillard
Differential Revision: D18114273
fbshipit-source-id: cbb99b46f
Summary:
This diff avoids making top values on unknown non-static function,
such as abstract function, calls. This is necessary because the
generated top values ruin the precision of the cost checker.
Reviewed By: ezgicicek
Differential Revision: D17418611
fbshipit-source-id: aeb759bdd
Summary:
The wrong function was used when we tried to see if the class is
annotated with NullsafeStrict. This made it work only for non-static
methods.
Now we use the proper way.
Reviewed By: ngorogiannis
Differential Revision: D18113848
fbshipit-source-id: 02b7555be
Summary:
Previously, we considered a function which modifies its parameters to be impure even though it might not be modifying the underlying value. This resulted in FPs like the following program in Java:
```
void fresh_pure(int[] a) {
a = new int[1];
}
```
Similarly, in C++, we considered the following program as impure because it was writing to `s`:
```
Simple* reassign_pure(Simple* s) {
s = new Simple{2};
return s;
}
```
This diff fixes that issue by starting the check for address equivalnce in pre-post not directly from the addresses of the stack variables, but from the addresses pointed to by these stack variables. That means, we only consider things to be impure if the actual values pointed by the parameters change.
Reviewed By: skcho
Differential Revision: D18113846
fbshipit-source-id: 3d7c712f3
Summary: We stop tracking at builder boundaries. Let's tract create methods as well so that trace is more informative.
Reviewed By: skcho
Differential Revision: D18038637
fbshipit-source-id: a99b6431f
Summary:
This is the first take on strict mode semantics.
The main invariant of strict mode is the following:
If the function passes `NullsafeStrict` check and its return value is
NOT annotated as Nullable, then the function does not indeed return
nulls, subject to unsoundness issues (which should either be fixed, or
should rarely happen in practice).
This invariant helps the caller in two ways:
1. Dangerous usages of non strict functions are visible, so the caller is enforced to check them (via assertions or conditions), or strictify them.
2. When the function is strict, the caller does not need to worry about
being defensive.
Biggest known issues so far:
1. Condition redundant and over-annotated warnings don't fully
respect strict mode, and this leads to stupid false positives. (There is
so much more stupid false positives in condition redundant anyway, so
not particularly a big deal for now).
2. Error reporting is not specific to mode. (E.g. we don't distinct real nullables and non-trusted non-nulls, which can be misleading). To be
improved as a follow up.
Reviewed By: artempyanykh
Differential Revision: D17978166
fbshipit-source-id: d6146ad71
Summary:
This is an intermediate nullability type powering future Strict mode.
See the next diff.
Reviewed By: artempyanykh
Differential Revision: D17977909
fbshipit-source-id: 2d5ab66d4
Summary:
Domain for thread-type. The main goals are
- Track code paths that are explicitly on UI thread (via annotations, or assertions).
- Maintain UI-thread-ness through the call stack (if a callee is on UI thread then the
trace any call site must be on the UI thread too).
- If we are not on the UI thread we assume we are on a background thread.
- Traces with "UI-thread" status cannot interleave but all other combinations can.
- We do not track other annotations (eg WorkerThread or AnyThread) as they can be
erroneously applied -- other checkers should catch those errors (annotation reachability).
- Top is AnyThread, and is used as the initial state for analysis.
Interestingly, by choosing the right strategy for choosing initial state and applying callee summaries gets rid of some false negatives in the tests even though we have not introduced any path sensitivity yet.
Reviewed By: jvillard
Differential Revision: D17929390
fbshipit-source-id: d72871034
Summary:
bigmacro_bender
There are 3 ways pulse tracks history. This is at least one too many. So
far, we have:
1. "histories": a humble list of "events" like "assigned here", "returned from call", ...
2. "interproc actions": a structured nesting of calls with a final "action", eg "f calls g calls h which does blah"
3. "traces", which combine one history with one interproc action
This diff gets rid of interproc actions and makes histories include
"nested" callee histories too. This allows pulse to track and display
how a value got assigned across function calls.
Traces are now more powerful and interleave histories and interproc
actions. This allows pulse to track how a value is fed into an action,
for instance performed in callee, which itself creates some more
(potentially now interprocedural) history before going to the next step
of the action (either another call or the action itself).
This gives much better traces, and some examples are added to showcase
this.
There are a lot of changes when applying summaries to keep track of
histories more accurately than was done before, but also a few
simplifications that give additional evidence that this is the right
concept.
Reviewed By: skcho
Differential Revision: D17908942
fbshipit-source-id: 3b62eaf78
Summary:
Java method annotations are ambiguous in that there is no difference between
annotating the return value of a method, and annotating the method itself.
The disambiguation is done entirely based on the meaning of the annotation.
Here, while `UiThread`/`MainThread` are genuine method/class annotations
and not return annotations, the reverse is true for `ForUiThread`/`ForNonUiThread`.
This means that these latter annotations do not determine the thread status of
the method they are attached to.
Here we fix that misunderstanding.
Reviewed By: jvillard
Differential Revision: D17960994
fbshipit-source-id: 5aecfb124
Summary: As per title. These test pass already because the previous thread domain was sufficient to express them. This won't necessarily be true when the whole-program analysis version comes around, because we may decide to not report on the `Threaded` elements (see domain).
Reviewed By: dulmarod
Differential Revision: D17930653
fbshipit-source-id: 2174f6b22
Summary:
Eventually thread status will be stored inside every critical pair so as to allow path sensitivity. That means that the status can no longer be a whole trace, as this will quickly become intractable, because each domain element would have to maintain its own trace as well as its own thread-status trace.
This is not great, as we lose information here, but I don't see any other way around it that is not super complicated/costly (sharing will be limited when moving from callee to caller).
Other diffs up the stack will clean up infrastructure no longer used meaningfully (ie models and domains).
Reviewed By: mityal
Differential Revision: D17908908
fbshipit-source-id: 3bf353e33
Summary:
Starvation is currently path insensitive. Two special cases of sensitivity cover a large range of useful cases:
- sensitivity on whether the current thread is a UI/background thread;
- sensitivity on whether a lock can be acquired (without blocking) or not.
We add a few tests capturing some of the false positives and negatives of the current analysis.
Reviewed By: mityal
Differential Revision: D17907492
fbshipit-source-id: fbce896ac
Summary:
This diff adopts an array length evaluation function that is conservative. It is useful when our
domain cannot express length result precisely.
For example, suppose there is an array pointer `arr_locs` that may point to two arrays `a` and `b`,
and their lengths are `a.length` and `b.length` (symbols), respectively. Using the usual
evaluation, our current domain cannot express `a.length join b.length` (join of two symbolic
values), so it returns top.
In this case, we can use the conservative function intead. It evaluates the length as `[0,
a.length.ub + b.length.ub]`, since we know every array length is positive. The result is not
precise, but better than top.
Reviewed By: ezgicicek
Differential Revision: D17908859
fbshipit-source-id: 7c0b1591b
Summary:
Let's add basic Java support to impurity checker. Since impurity checker relies on pulse, we need to add Java with Pulse callback as well. Pulse doesn't officially support Java yet, but we can enable it for impurity checker for now.
Many Java primitives/operations are not yet modeled (such as creation of new objects, support for collections etc.). Still, it is good to run impurity checker on the existing tests of the purity checker. Also, it is nice to see that we can identify most of the impure functions correctly in the purity dir. There are a lot of FNs though.
Reviewed By: skcho
Differential Revision: D17906237
fbshipit-source-id: 15308d285
Summary:
This diff introduces inequality for the iterator alias target, as we
did for the size target before.
Reviewed By: ezgicicek
Differential Revision: D17879208
fbshipit-source-id: cc2f6a723
Summary:
This diff revises the semantics of hasNext model to add the lengths of
arrays, rather than join them to top.
Reviewed By: ezgicicek
Differential Revision: D17882388
fbshipit-source-id: f5edaedb3
Summary:
[androidx.collection.SimpleArrayMap](https://developer.android.com/reference/androidx/collection/SimpleArrayMap.html) also has `keySet` and `entrySet` methods which make them eligible for inefficient keyset checker. Let's add it.
Title
Reviewed By: skcho
Differential Revision: D17831594
fbshipit-source-id: 32e831e18
Summary:
The current usage has several issues reducing code maintainability and
readability:
1. Null_field_access was misleading: it was used for checking accesing
to arrays as well!
2. But actually, when checking access to array via `length`, we sometimes
pretended it is a field access (hence very tricky code in rendering the
error).
3. "Call receiver consistency" is unclear name, was not obvious that it is all about
calling a method in an object.
Let's also consolidate code.
Reviewed By: artempyanykh
Differential Revision: D17789618
fbshipit-source-id: 9b0f58c9c
Summary: Before, we didn't track litho framework callees on client code which was wrong. Now, we replace this with the following: If the callee is `build()` itself or doesn't contain a `build()` in its summary, then we want to track it in the domain. The former makes sense since we always want to track `build()` methods. The latter also makes sense since such a method could be a setter for a prop (as in the case of `prop1` in `buildPropLithoOK` which we were missing before due to the imprecise heuristic that prevented picking up callees in litho).
Reviewed By: ngorogiannis
Differential Revision: D17810704
fbshipit-source-id: 87d88e921
Summary: As a heuristic, litho library calls on non-litho callers are not tracked. This is very imprecise and results in FPs and FNs as exemplified by newly added tests. Instead, we should check to see if the summary contains a `build()` method as will be done in the next diff. This diff adds these tests and refactors the test code.
Reviewed By: skcho
Differential Revision: D17809536
fbshipit-source-id: 6dff1868c
Summary:
Improve the trace by incorporating the callees and their locations in the call chain (i.e. chain of methods starting from `build()` call)
- extend the domain to contain the callee location
- replace the test results with the new traces
This makes our job much easier to debug FPs in a big codebase.
Reviewed By: skcho
Differential Revision: D17788996
fbshipit-source-id: 31938b5fe
Summary: `litho` checker contained two checkers: required-props and graphQL field accesses. Although they use the same domain, their reporting conditions and analysis details are different. However, they were bundled into the same analysis by adding disjunctions to `exec_instr` to handle both cases. Let's separate them into two different checkers, keeping a modular transfer function and analyzer that is reused by these two checkers.
Reviewed By: skcho
Differential Revision: D17788834
fbshipit-source-id: 47d77063b
Summary:
At some point it was thought that we can assume that any annotation starting with "On" means the method is on the UI thread.
That's too imprecise and has led to false positives and negatives. Restrict to a well-known safe set.
Reviewed By: ezgicicek
Differential Revision: D17769376
fbshipit-source-id: 0f8fee059
Summary:
This diff tries to narrowing the fixpoint of outermost loops, so that over-approximated widened values do not flow to the following code.
Problem: There are two phases for finding a fixpoint, widening and narrowing. First, it finds a fixpoint with widening, in function level. After that, it finds a fixpoint with narrowing. A problem is that sometimes an overly-approximated, imprecise, values by widening are flowed to the following loops. They are hard to narrow in the narrowing phase because there is a cycle preventing it.
To mitigate the problem, it tries to do narrowing, in loop level, right after it found a fixpoint of a loop. Thus, it narrows before the widened values are flowed to the following loops. In order to guarantee the termination of the analysis, this eager narrowing is applied only to the outermost loops.
Reviewed By: ezgicicek
Differential Revision: D17740265
fbshipit-source-id: e2d454036
Summary:
This diff extends the alias domain to analyze loop with list comprehensions form in Java precisely.
```
list2 = new List();
for (Element e : list1) {
list2.add(e);
}
```
1. `IteratorOffset` is a relation between a iterator offset and a length of another array. For example, in the above example, after n-times of iterations, the offset of the iterator (if it exists) and the length of `list2` are the same as `n`.
2. `IteratorHasNext` is a relation between iterator and its `hasNext` result.
3. At the conditional nodes, it prunes the alias list length of `list2` by that of `list1`.
* if `hasNext(list1's iterator)` is true, `list2`'s length is pruned by `< list1's length`
* if `hasNext(list1's iterator)` is false, `list2`'s length is pruned by `= list1's length`
Reviewed By: ezgicicek
Differential Revision: D17667128
fbshipit-source-id: 41fb23a45
Summary:
The old domain keeps two sets:
- `events` are things (including lock acquisitions) which eventually happen during the execution of a procedure.
- `order` are pairs of `(lock, event)` such that there is a trace through the procedure which at some point acquires `lock` and before releasing it performs `event`.
A deadlock would be reported if for two procedures, `(lock1,lock2)` is in `order` of procedure 1 and `(lock2,lock1)` is in `order` of procedure 2. This condition/domain allowed for the false positive fixed in the tests, as well as was unwieldy, because it required translating between the two sets.
The new domain has only one set of "critical pairs" `(locks, event)` such that there is a trace where `event` occurs, and *right before it occurs* the locks held are exactly `locks` (no over/under approximation). This allows keeping all information in one set, simplifies the procedure call handling and eliminates the known false positive.
Reviewed By: mityal
Differential Revision: D17686944
fbshipit-source-id: 3c68bb957
Summary: Holding a master lock and then acquiring two other locks inside can generate a false positive as shown.
Reviewed By: mityal
Differential Revision: D17710076
fbshipit-source-id: 5bc910ba2
Summary:
Previously deduplication was always on which is not great for testing.
Also split tests so that we can still test deduplication separately.
Reviewed By: mityal
Differential Revision: D17686877
fbshipit-source-id: 280d91473
Summary:
Ideally the analyser should equate locks `this.x.f` and `a.x.f` in different methods if they can alias.
The heuristic removed here was rarely used and is in the way of a re-write of the analysis.
It was also badly implemented, as this should ideally be the comparison relation of `Lock`.
Reviewed By: mityal
Differential Revision: D17602827
fbshipit-source-id: 4f4576c1a
Summary:
This diff generates a symbolic value when a function returns only
exceptions. Previously, the exception expression is evaluated to top,
thus it was propagated to other functions, which made those costs as
top. For preventing that situation, this diff changed:
* exception expressions are evaluated to bottom, and
* if callee's return value is bottom, it generates a symbolic value
for it.
Reviewed By: ezgicicek
Differential Revision: D17500386
fbshipit-source-id: 0fdcc710d
Summary: This diff introduces an inequality for the size alias targets, in order to get preciser array lengths after loops. The alias domain in inferbo was able to express strict equality between alias source and its targets, e.g. x=size(array). Now, for the size alias target, it can express less than or equal relations, e.g. x>=size(array).
Reviewed By: ezgicicek
Differential Revision: D17606222
fbshipit-source-id: 2557d3bd0
Summary: Component.Builder has its own non-required props that are inherited by the MyComponent.Builder. Add tests where these common props are set in the chain of calls.
Reviewed By: Katalune
Differential Revision: D17710294
fbshipit-source-id: f3c5ef28c
Summary: `Prop(varArg = myProp) List <?> myPropList` can also be set via `myPropList()` or `myProp()`. Add support for picking up the `varArg` and checking this form of required props.
Reviewed By: ngorogiannis
Differential Revision: D17571997
fbshipit-source-id: 7956cb972
Summary:
Turns out, we did not have such a test in place.
Known issue: we report over-annotated warnings for each fields N times,
one per constructor, which is wrong.
Reviewed By: artempyanykh
Differential Revision: D17574791
fbshipit-source-id: def992691
Summary:
This diff avoids giving the top value to unknown globals in Java,
because they harm precision of the cost checker. Instead, it doesn't
subst the global symbols at function calls.
Reviewed By: ezgicicek
Differential Revision: D17498714
fbshipit-source-id: d1215b3aa
Summary:
This diff adds an eval mode for the substitutions of the cost results, in order to avoid precision
loss by joining two symbols.
The usual join of two different symbolic values, `s1` and `s2`, becomes top due to the limitation of
our domain. On the other hand, in the new eval mode, it returns an upperbound `s1+s2`, because the
cost values only care about the upperbounds.
Reviewed By: ezgicicek
Differential Revision: D17573400
fbshipit-source-id: 2c84743d5
Summary:
This continues work for eliminating Annot.Item.t from Nullsafe low-level
code.
The introduced function `from_nullsafe_type` is called when we infer
initial type of the equation based on the function or field formal signature.
Before that, we did it via reading the annotation directly, which
complicates the logic and making introducing Unknown nullability tricky.
## Clarifying the semantics of PropagatesNullable
This diff also clarifies (and changes) the behavior of PropagatesNullable params.
Previously, if the return value of a function that has PropagatesNullable params was
annotated as Nullable, nullsafe was effectively ignoring PropagatesNullable effect.
This is especially bad because one can add Nullable annotation based on the logic "if the function can return `null`, it should be annotated with Nullable`.
In the new design, there is no possibility for such a misuse: the code that
applies the rule "any param is PropagatesNullable hence the return
value is nullable even if not explicitly annotated" lives in NullsafeType.ml, so
this will be automatically taken into account.
Meaning that now we implicitly deduce Nullable annotation for the return value, and providing it explicitly as an alternative that does not change the effect.
In the future, we might consider annotating the return value with `Nullable` explicit.
Reviewed By: jvillard
Differential Revision: D17479157
fbshipit-source-id: 66c2c8777
Summary:
In the cost checker, the range of selected control variables are used to estimate the number of loop iteration. However, sometimes the ranges of control variables are not related to how many times the loop iteration. This diff strengthens the condition for them as:
1. integers from `size` models
2. integers constructed from `+` or `-`
3. integers constructed from `*`
For the last one, the loop iteration is likely to be log scale of the range of the control variable:
```
while (i < c) {
i *= 2;
}
```
We will address this in the future.
Reviewed By: ezgicicek
Differential Revision: D17365796
fbshipit-source-id: c1e709ae8
Summary: Our annotation parameter parsing is too primitive to identify `resType` and before we only assumed that all Prop's can be set by any of the two suffixes: `Attr` and `Res`. After talking to Litho team, there is 3 more additions to these suffixes: `Dip`, `Sip`, and `Px`.
Reviewed By: ngorogiannis
Differential Revision: D17528482
fbshipit-source-id: 8d7f49130
Summary: Before, we were mistakenly checking any annotation that ends with Prop such as TreeProp. This was wrong. Instead, we should only check Prop as adviced by the Litho team.
Reviewed By: ngorogiannis
Differential Revision: D17527769
fbshipit-source-id: b753dd87a
Summary:
`ModeledRange` represents how many times the interval value can be updated by modeled functions. This
domain is to support the case where there are mismatches between value of a control variable and
actual number of loop iterations. For example,
```
while((c = file_channel.read(buf)) != -1) { ... }
```
the loop will iterates as the file size, but the control variable `c` does not have that value. In
these cases, it assigns a symbolic value of the file size to the modeled range of `c`, then which
is used when calculating the overall cost.
Reviewed By: jvillard
Differential Revision: D17476621
fbshipit-source-id: 9a81376e8
Summary:
This diff extends the `Simple` alias domain to address Java's
temporary variables better. It now has an additional field to denote
an alias temporary variable.
Reviewed By: jvillard
Differential Revision: D17421907
fbshipit-source-id: 8b8b47461
Summary:
D17397144 adds dedicated tests for condition redundant.
We also have tests for overannotated methods.
This makes these test cases redundant. Let's not pollute the results.
Reviewed By: jberdine
Differential Revision: D17398757
fbshipit-source-id: 10f6beeca
Summary:
This will simplify modifying functionality around this type of error.
Also rename the file for clarity.
Reviewed By: jvillard
Differential Revision: D17397144
fbshipit-source-id: 552215243
Summary:
This diff revises widening functions of bounds that have a linear form and a min/max form.
For example, for lower bounds,
* 3 ▽ (1+min(2, x)) = (1+min(2, x))
* 3+x ▽ (3+min(2, x)) = (3+min(2, x))
Reviewed By: jvillard
Differential Revision: D17420786
fbshipit-source-id: ff9eebed3
Summary:
This diff addresses collection adds in loop. For example,
```
ArrayList<...> a = new ArrayList<>();
for (int i = 0; i < size; i++) {
a.add(...);
}
// we want to know the size of `a` here!
```
This is a common pattern on initializing a collection in Java.
How we did: Instead of adopting general (but complicated) solutions such as relational domain, we
extended the current alias domain of inferbo, to be able to handle this specific case:
* An array `a` should have size 0, at the entry of the loop.
* The iterating variable `i` should start with 0.
* `add` should be called once inside the loop.
Reviewed By: jvillard
Differential Revision: D17319350
fbshipit-source-id: 99b6acae1
Summary:
In D17156724, we forked nullsafe tests, which was a strategy to
introduce nullsafe-gradual mode back then.
The reason was "gradual" mode is a pretty big change in a way Infer
handles annotations, so we wanted to tests both scenarios: gradual and
non-gradual mode.
The plan was to deprecate "non-gradual" tests at some point, hence we
decided to go with duplication.
Now we have a better approach to ensure "gradual" features are well
covered. The approach is the following.
1. [Mostly finished] Improve existings tests so that they cover negative and positive
cases. With this, we can safely add something like
--non-annotated-default UNKNOWN_NULLABILITY to the test config and be sure tests still make
sense (i.e. don't pass simply because annotations don't make sense
anymore)
2. [In progress]. Refactor nullsafe code so that instead of using of Annot.ml everywhere we use a special abstraction telling if the class is annotated with Nullable, Nonnull, or not annotated. With this change, we essenstially have a single place we need to test, which removes the need to have 2 pair of tests for each feature.
3. [To be done]. Introduce Uknown nullability and add small number of tests specifically
for that feature (together with existing tests).
NOTE: I did not rename `nullsafe-default` back to `nullsafe` to not
pollute blame without need.
Reviewed By: artempyanykh
Differential Revision: D17395743
fbshipit-source-id: 3d3e062f6
Summary:
Get rid of helper class `C`, normal Object serves the same goal well
Don't return values from a function, focus only on nullable
dereferences.
Reviewed By: jberdine
Differential Revision: D17314569
fbshipit-source-id: d70e66b5f
Summary:
1. Split into 3 subclasses for 3 major set of features we test
2. Document a known FP
3. More clear names
Reviewed By: jberdine
Differential Revision: D17285902
fbshipit-source-id: 66e3b5668
Summary:
Let's consolidate "positive" and "negative" cased together by adding an example
of not annotated class as a source of "negative" cases.
Also join the case with modelled methods to the same class.
Reviewed By: jberdine
Differential Revision: D17284101
fbshipit-source-id: e15e60691
Summary:
There are currently plenty of ways to suppress the warning, including Inject, Initializer, and SuppressFieldNotInitialized annotations.
This one (annotating field with Nonnull) is counter-intuitive and does not align with gradual nullsafe
semantics we are working on.
Reviewed By: artempyanykh
Differential Revision: D17281702
fbshipit-source-id: 132e1b687
Summary:
This diff ignores character symbols in the cost results, in order to
avoid FPs from parser code.
Reviewed By: ezgicicek
Differential Revision: D17132053
fbshipit-source-id: d9cf8bd26
Summary: let's always have positive and negative case for each feature we test
Reviewed By: ngorogiannis
Differential Revision: D17206785
fbshipit-source-id: 5791ace48
Summary:
1. Let's move it to the file dedicated to this particular warning.
2. Make it more general (Activity was just a particular case) and describe in comments what it really does.
Reviewed By: ngorogiannis
Differential Revision: D17205919
fbshipit-source-id: 82bf5e9bd
Summary:
1. Remove boilerplate with builder that uses builder initializer; it
demostates a usecase but it is not really relevant for the test so it
distracts attention.
Instead, describe the usecase in the comment
2. Add good and bad cases so it is obvious what exactly do we test.
Reviewed By: artempyanykh
Differential Revision: D17204969
fbshipit-source-id: 005ea078b
Summary:
Let's combine with the one that tests a very similar thing for known
cleanup methods
Reviewed By: ngorogiannis
Differential Revision: D17204206
fbshipit-source-id: dbdbde903
Summary:
1. Remove manipulations with "shadowed" fields and abstract class, I don't believe they produced high quality signal (and no related warnings in the test output).
2. For each failure case provide corresponding success case and the
reverse
Reviewed By: artempyanykh
Differential Revision: D17203240
fbshipit-source-id: c809857ed
Summary:
1. Let's make the intention of the test more visible, also let's provide an example
when the error does occur.
2. `onDestroy` silence "field not nullable" warnigs not only for `View`, but for any objects, so let's use `String` (as an example of a trivial object) instead.
Original diff that introduced the test: D10024458
Reviewed By: artempyanykh
Differential Revision: D17202839
fbshipit-source-id: 037d937e4
Summary: This diff adds models of Java String. In order to keep the precision of cost checker, I fixed cost models for String in this diff too.
Reviewed By: ngorogiannis
Differential Revision: D17203309
fbshipit-source-id: 8cc2814fc
Summary:
See motivation below.
This diff is dealing with FieldNotNullable:
- move not relevant subclasses into dedicated classes and files
- modify the tests so they comply with the standards below
--Motivation--
Gradual mode we are going to introduce is an invasive change in how Infer
treats nullability semantics.
In order to make the change in a controllable way, we need the tests to comply with the
following standards and conventions.
1. For each code peace where we expect a bug to happen, the there should be
corresponding (minimally different from above) peace of code where we expect a bug to NOT happen. (This is to ensure bug is happening for exact reason we think it is happening).
2. Conversely: for each peace of code where we expect a bug to be NOT
present, there shuold be a peace of code where the bug IS happening.
(Otherwise there can be too many reasons for a bug NOT to happen).
3. Convention: end corresponding methods IsOK and IsBUG correspondingly.
4. Keep code examples as small as possible.
Reviewed By: ngorogiannis
Differential Revision: D17183222
fbshipit-source-id: 83d03e67f
Summary:
In next diff, we are going to introduce a new mode of nullsafe
(gradual). For testing, we are going to employ the strategy used by jvillard
for Pulse.
In this diff we split tests into two subfolders, one for the default and one for the gradual
mode.
We are planning to make the gradual mode default eventually. For that, most
new features will make sense for gradual mode, and we will mostly evolve
tests for that mode.
As for 'default' mode, we need to preserve tests mostly to ensure we don't introduce
regressions.
Occasionally, we might make changes that make sense for both modes, in
this (expected relatively rare) cases we will make changes to both set
of tests.
An alternative strategy would be to have two sets of issues.exp files,
one for gradual and one for default mode. This has an advantage of each
java file to be always tested twice, but disadvantage is that it will be
harder to write meaningful test code so that it makes sense for both
modes simultaneously.
Reviewed By: ngorogiannis
Differential Revision: D17156724
fbshipit-source-id: a92a9208f
Summary:
`Present` annotation was an experiment made many years ago that never
got into real usage. The idea was to annotate Optional<> types with
Present, which means that it is safe to call get().
We don't plan to support `Present` annotation for optional types in the
near future.
Support of `Present` annotation requires extra levels of abstraction
that make the changing the behavior and introducing new features harder.
A lot of checks for nullability are written in generic way so they also
check for presense.
Getting rid of that will allow us to simplify our
work for introducing new semantics for nullsafe.
Reviewed By: ngorogiannis
Differential Revision: D17153432
fbshipit-source-id: c5ea9bdf1
Summary:
Since it does not make sense to get ranges of non-integer values and
use them as approximate iteration numbers, this diff ignores control
values that only contain non-integer symbols.
Reviewed By: ezgicicek
Differential Revision: D17130967
fbshipit-source-id: f5ba58d52
Summary: This diff extends size alias domain for keeping one more alias of a Java temporary variable.
Reviewed By: ezgicicek
Differential Revision: D16984082
fbshipit-source-id: 244bbd0ee
Summary:
The purpose of DefinitelyNotNullable currently is bit unclear; let's
rename it so that the intention is obvious.
Reviewed By: artempyanykh
Differential Revision: D16984529
fbshipit-source-id: 696d58315
Summary:
`nullsafe` currently allows the following:
```
public void Nonnull Object willBeOK() { return null; }
```
But disallows the following:
```
public void Object willBeAnIssue() { return null; }
```
This was a deliberate choice made back in 2014.
The motivation was to provide a way to tell the checker "I know it can not be null, trust me".
A huge problem with that approach is that it is extremely non-intuitive and surprising, and contradicts with pretty much everything when Nonnull or similar annotations are used in external world.
This is not the way how checkers should be supressed.
We do provide 2 options to express this intention, namely `assertNotNull` and `assumeNotNull` would do the thing.
This is a much better approach for additional reason: assertNotNull is
granular and applies only to the exact expression that is under
question. In contrast, suppressing the check on the whole function level
make any modifications of a function dangerous.
Reviewed By: artempyanykh
Differential Revision: D16984213
fbshipit-source-id: 0ba0f623b
Summary: This diff prunes array sizes in Java by adding the size alias on the `get_array_length` function calls.
Reviewed By: ezgicicek
Differential Revision: D16983501
fbshipit-source-id: a924af09d
Summary:
It prunes the size of collections when the size function is called in the condition expression. The diff extended the alias domain to understand temporary variables of SIL from Java.
Depends on D16761461
Reviewed By: ezgicicek
Differential Revision: D16761611
fbshipit-source-id: 849c5c71c
Summary:
It revises Java's cast model to keep type in the location when it has a field.
The type information is useful especially when generating ondemand values of Collection elements.
Depends on D16807299
Reviewed By: ezgicicek
Differential Revision: D16807378
fbshipit-source-id: 636e54429
Summary: Ideally, we should be able to handle them like pruning if statements but for now, let's add the test.
Reviewed By: skcho
Differential Revision: D16938842
fbshipit-source-id: 04fae9559
Summary:
Since it is non-sense to get ranges of boolean values, this diff
ignores control values that only contain boolean symbols.
Depends on D16804802
Reviewed By: ezgicicek
Differential Revision: D16804808
fbshipit-source-id: ccb25db4d
Summary: Functions with empty body have unit cost, not zero. The unit cost comes from the start node.
Reviewed By: skcho
Differential Revision: D16855642
fbshipit-source-id: 6b5181faf
Summary:
Before this diff it returned `[0,size-1]`, but which became bottom
when size was given by 0. As a result, it made the both branches of
`if(iterator.hasNext())` unreachable. Similarly, if the size was 1,
it only visited the false branch of the if condition because the
condition value was `[0,0]` at that time.
This diff changes it to return `[0,size]`, so that
* the false branch is reachable when the size is 0
* the both branches are reachable when the size is 1
Reviewed By: ezgicicek
Differential Revision: D16803000
fbshipit-source-id: f8772be27
Summary: We want to keep big O notation as simple as possible in cost analysis reports (especially in diff time). Therefore, let's not show constants/min/max in big O notations even though the resulting asymptotic bound might be inaccurate. Developers can click on the trace and see the actual cost.
Reviewed By: skcho
Differential Revision: D16731351
fbshipit-source-id: 2e16f7eca
Summary: In order to test changes to bigO notation, let's record them in test results.
Reviewed By: skcho
Differential Revision: D16763972
fbshipit-source-id: c1376909b
Summary:
Correct the models of ArrayList initialization. Basically, there are two ways to initialize:
- by setting an initial capacity, which creates an empty list
- by passing another collection as an argument
Before, we had only modeled the second case which was resulting in wrong memory model for the first case. This diff fixes that.
Reviewed By: skcho
Differential Revision: D16711055
fbshipit-source-id: e82faf191
Summary: Models of Java's Collection mistakenly assumed that there was an argument for empty set whereas `Collections.emptySet()` doesn't have any actuals. This diff fixes that an also removes the type argument from the corresponding model definition.
Reviewed By: skcho
Differential Revision: D16582314
fbshipit-source-id: d4304dc60
Summary:
The `represents_multiple_values` flag was adopted to decide whether updating abstract value strongly or weakly. However, the flag was included in the `Val` domain, which is strange, because it is a property of abstract locations, rather than abstract values. This makes the behavior of memory update function depend on the abstract value to update, making its code complicated.
This diff detach the `represents_multiple_values` flag from the `Value` domain, thus the memory update does not depend on the abstract value. Since this is a refactoring, I believe the diff should not make many semantic changes.
Reviewed By: ezgicicek
Differential Revision: D16441734
fbshipit-source-id: 4c10779d7
Summary:
The domain supported path sensitivity wrt to a specific boolean guard `Branch.unlikely`. This isn't used in actual code, so remove it.
Also
- add an .mli to the domain;
- unabbreviate domain name to match analyser name;
- use Payload.read instead of calling Ondemand directly;
- adjust tests.
Reviewed By: mbouaziz
Differential Revision: D16203953
fbshipit-source-id: 743aa4400
Summary:
Move annotation reachability tests to their own directory.
Clean up and complete the tests.
Reviewed By: jvillard
Differential Revision: D16201387
fbshipit-source-id: 8a87a25b7
Summary:
Treat `MainThread` and `WorkerThread` annotations.
Fix wrong test (`AnyThread` cannot call a UI-only method, because it can be called by ANY thread ;) ) See https://developer.android.com/reference/android/support/annotation/AnyThread
Clean up the code a bit.
Reviewed By: jvillard
Differential Revision: D16183798
fbshipit-source-id: 6b7e3b27e
Summary: There were FNs caused by only looking for the immediate predecessors when we were checking the pattern. This diff heuristically chases 4 more predecessors to reduce the number of FNs.
Reviewed By: ngorogiannis
Differential Revision: D16149983
fbshipit-source-id: f65c57a0a
Summary: Adding typechecks to prevent potential FPs like the added test
Reviewed By: ngorogiannis
Differential Revision: D16149511
fbshipit-source-id: 6d3fe0ad4
Summary:
- Add allocation costs to `costs-report.json` and enable diffing over allocation costs.
- Also, let's be more consistent and modular in naming our cost issues.
- introduce a generic issue type `X_TIME_COMPLEXITY_INCREASE` where `X` can be one of the cost kinds. If the function is on the cold start, issue can have the `COLD_START` suffix. Similarly for infinite/zero/expensive calls.
- Change `PERFORMANCE_VARIATION` -> `EXECUTION_TIME_COMPLEXITY_INCREASE`
- Add new issue type for `ALLOCATION_COMPLEXITY_INCREASE_COLD_START` which will be enabled by default
- Refactor cost issues to be more modular and succinct. This also makes addition of a new cost kind very easy by adding the kind into the `enabled_cost_kinds` list in `CostKind.ml`
Reviewed By: mbouaziz
Differential Revision: D15822681
fbshipit-source-id: cf89ece59
Summary:
This is a simple checker that identifies inefficient uses of `keySet` iterator where (not only the key but also) the value is accessed via `get(key)`. It is more efficient to use `entrySet` iterator which already returns both key-value pairs. This optimization would get rid of many extra lookups which can be expensive.
We simply traverse the CFG starting from the loop head upwards and pick up the map that is iterated over. Then, we check in the loop nodes if there is a call to `get(...)` over this map. If, so we report.
Reviewed By: ngorogiannis
Differential Revision: D15737779
fbshipit-source-id: 702465b4e
Summary:
The synthetic methods from `topl.Property` are now nonempty: they
simulate a nondeterministic automaton.
Reviewed By: jvillard
Differential Revision: D15668471
fbshipit-source-id: 050408283
Summary:
Instrument SIL according to TOPL properties. Roughly, the
instrumentation is a set of calls into procedures that simulate a
nondeterministic automaton. For now, those procedures are NOP dummies.
Reviewed By: jvillard
Differential Revision: D15063942
fbshipit-source-id: d22c2f6fa
Summary:
- Rename `invariantModels` to `purityModels`
- Track which arguments are modified in purity models. Before we were invalidating all arguments of impure modeled functions. Instead, now we only invalidate modified args given in the model. This should ideally result in more precision in the analysis.
- Add some more purity models for :`cast`, `new`, `new_array` and `Math.random`
Reviewed By: mbouaziz
Differential Revision: D15535332
fbshipit-source-id: 5395800d9
Summary:
Increases precision a bit. I didn't observe speed problems on what I tested. (But, who knows?)
Closes https://github.com/facebook/infer/pull/799
Reviewed By: jvillard
Differential Revision: D6284206
Pulled By: rgrig
fbshipit-source-id: 6f1e8631f
Summary: This diff substitutes symbolic values for unknown functions in proof obligations to top. The goal of the diff is to avoid generating too many number of proof obligations that cannot be concretized.
Reviewed By: ezgicicek
Differential Revision: D14537542
fbshipit-source-id: 7f8f3bb4b
Summary:
TOPL properties are essentially automata, which specify a bad pattern.
This commit is just a parser for them.
Reviewed By: jvillard
Differential Revision: D14477671
fbshipit-source-id: c38a8ef37
Summary:
Add support for GuardedBy: we deviate from the spec as follows:
- No warnings issued for any access within a private method, unless that method is called from a public method and the lock isn't held when the access occurs.
- Warnings are suppressed with the general RacerD mechanism, ie `ThreadSafe(enableChecks=false)`
- GuardedBy warnings override thread-safety violation warnings on the same access, because GuardedBy has a clearer and simpler contract.
Also, some simplifications, cleanups and perf improvements (eg avoid unreportable procs at the top level as opposed to on each of their accesses).
Reviewed By: jeremydubreil
Differential Revision: D14506161
fbshipit-source-id: b7d794051
Summary:
It assigns symbolic values for global variables in the load commands. However, it does not instantiate the symbols for the global variables yet, which will be addressed in another diff.
Depends on D14208643
Reviewed By: ezgicicek
Differential Revision: D14257619
fbshipit-source-id: f9113c8a3
Summary:
The Eradicate backend is reporting nullable type errors, that are not always necessarily leading to null pointer exceptions.
For example, the analysis is designed to be consistent with the Java type system and report on the following code:
String foo(boolean test) {
Object object = test ? new Object() : null;
if (test) {
return object.toString(); // the analysis reports here
}
}
even though the code will not crash.
In order to make this aspect clear, this diff renames the warnings `Null Method Call` and `Null Field Access` into `Nullable Dereference`
Reviewed By: ngorogiannis
Differential Revision: D14001979
fbshipit-source-id: ff1285283
Summary:
This diff adds a constant to the set of widening thresholds if the
constant is compared to an abstract value in condition expressions.
Each abstract value has its own set of thresholds.
Reviewed By: mbouaziz
Differential Revision: D14147150
fbshipit-source-id: ca0db34d4
Summary: Record where each symbol in a polynomial is coming from: either a loop, function call or a modeled call.
Reviewed By: mbouaziz
Differential Revision: D14047420
fbshipit-source-id: 56d0bd926
Summary: In SIL, Java's array member is a pointer to an array, while C++'s is the array itself. This diff differentiate them in evaluating abstract locations.
Reviewed By: ezgicicek, mbouaziz
Differential Revision: D14021451
fbshipit-source-id: 00f14fe3b
Summary:
- There is no need to use AI to compute a dot product: let's just fold over all nodes, but still do it in order (using the WTO) to report at the right place
- The previous version was computing a dot product on nodes for each node, which was quadratic, the new version is linear
- Report only once, the first time the threshold is reached (if in a loop, report at the loop head)
Reviewed By: ddino
Differential Revision: D14028171
fbshipit-source-id: b4a840c6e
Summary:
Get rid of false positive as in the test by modelling `Double`. Longer term we
should probably prevent biabduction from blocking the angelic analysis on
`Nullable` fields but that seems harder.
Reviewed By: jeremydubreil
Differential Revision: D14005228
fbshipit-source-id: 59ef2ed66
Summary: The Makefile was missing that target and making `make test-replace` at the root of the repo fail.
Reviewed By: ngorogiannis
Differential Revision: D13990483
fbshipit-source-id: 805b5d2a9
Summary:
This will allow to get the numerical results for Cost, Hoisting, Purity without the Inferbo issues.
For now, I still forced Inferbo issues for Cost and Purity to avoid lots of changes in tests, that will go away soon.
Reviewed By: ezgicicek, skcho
Differential Revision: D13826741
fbshipit-source-id: 796d1a50d
Summary: Publish solutions to the lab, and a Docker file and image to get started more quickly with infer hacking.
Reviewed By: mbouaziz
Differential Revision: D13648847
fbshipit-source-id: daf48ad03
Summary: This diff unset powloc and arrayblk values of p when assume(p==Null).
Reviewed By: mbouaziz, jvillard
Differential Revision: D13415366
fbshipit-source-id: a491a957f
Summary:
For abstract values representing one concrete value, create only one symbol instead of two.
Still create two symbols (lb, ub) for abstract values representing multiple concrete values (like array cells).
As a consequence, comparisons of symbolic values are more precise (we can even prove equality). I expect to remove a bunch of FPs.
Another consequence is the disappearance of `.lb` and `.ub` in many reports.
Reviewed By: skcho
Differential Revision: D13072084
fbshipit-source-id: 9bc0b9881
Summary:
It materializes symbolic values of function parameters on-demand. The on-demand materialization is triggered when finding a value from an abstract memory and joining/widening abstract memories.
Depends on D13294630
Main idea:
* Symbolic values are on-demand-ly generated by a symbol path and its type
* In order to avoid infinite generation of symbolic values, symbol paths are canonicalized by structure types and field names (which means they are abstracted to the same value). For example, in a linked list, a symbolic value `x->next->next` is canonicalized to `x->next` when the structures (`*x` and `*x->next`) have the same structure type and the same field name (`next`).
Changes from the previous code:
* `Symbol.t` does not include `id` and `pname` for distinguishing symbols. Now, all symbols are compared by `path:SymbolPath.partial` and `bound_end`.
* `SymbolTable` is no longer used, which was used for generating symbolic values with new `id`s.
Reviewed By: mbouaziz
Differential Revision: D13294635
fbshipit-source-id: fa422f084
Summary:
At function calls, it copies callee's values that are reachable from parameters.
Depends on D13231291
Reviewed By: mbouaziz
Differential Revision: D13231711
fbshipit-source-id: 1e8aed1c4
Summary:
For more deduplications of issues, this diff loosens the condition of
similar bounds. The previous condition of similar bounds was too
strict, so [0,0] and [0,+oo] were not similar.
Depends on D10851762
Reviewed By: mbouaziz
Differential Revision: D10866127
fbshipit-source-id: 4ba912a88
Summary:
This diff preserves values of offset and index separately, rather than
one value of their addition, because premature addition results in
imprecise FPs by the limited expressiveness of the domain.
Reviewed By: mbouaziz
Differential Revision: D10851393
fbshipit-source-id: 1685ead36
Summary: Reports will now be issued for the class loads of the methods specified by the option `--class-loads-roots`.
Reviewed By: jvillard
Differential Revision: D10466492
fbshipit-source-id: 91456d723
Summary:
It avoids checking integer overflow when it definitely cannot happen.
For example, it does not check integer overflow of addition when one
of parameters is a negative number, or underflow of subtraction when
its first parameter is a positive number.
Reviewed By: mbouaziz
Differential Revision: D10446161
fbshipit-source-id: b8c86e1b2
Summary: This diff changes pp of binary operation condition in order to avoid a `make test` failure. For the same `uint64_t` type, it is translated to `unsigned long long` in 64bit mac, but `unsigned long` in 64bit linux, which made a `make test` failure.
Reviewed By: mbouaziz
Differential Revision: D10459466
fbshipit-source-id: 449ab548e
Summary:
Use same code for deciding whether two accesses conflict across java/clang, by adapting that of the clang version.
Eliminate/simplify some code.
Reviewed By: mbouaziz, jberdine
Differential Revision: D10217383
fbshipit-source-id: dc0986d05
Summary:
Make distinct reports on strict mode violations.
For now, restrict to direct violations (UI threads calls transitively a violating method).
Will assess impact and enable indirect reports later (via locks).
Reviewed By: mbouaziz
Differential Revision: D10126780
fbshipit-source-id: 9c75930bc
Summary: Before this diff, the analysis would only lookup the attributes with the classname appearing in the instruction. However, it would fail to find those attributes for inherited and not overridden methods. With this diff, the attributes are now searched recursively in the super classes.
Reviewed By: mbouaziz
Differential Revision: D10007469
fbshipit-source-id: 77d721cba
Summary: This fixes some cases of false positives where the analysis will compare with the wrong overridden methods. This could later be improved with the possibility to do sub-typing comparison on the parameters.
Reviewed By: ngorogiannis
Differential Revision: D9985249
fbshipit-source-id: 7998d8619
Summary:
Keep `--analyzer` around for now for integrations that depend on it.
Also deprecate the `--infer-blacklist-path-regex`,
`--checkers-blacklist-path-regex`, etc. in favour of
`--report-blacklist-path-regex` which more accurately represents what these do
as of now.
Rely on the current subcommand instead of the analyzer where needed, as most of
the code already does.
Reviewed By: jeremydubreil
Differential Revision: D9942809
fbshipit-source-id: 9380e6036
Summary:
Goal of the stack: deprecate the `--analyzer` option in favour of turning
individual features on and off. This option is a mess: some of the options are
now subcommands (compile, capture), others are aliases (infer and checkers),
and they can all be replicated using some straightforward combination of other
options.
This diff: stop using `--analyzer` in tests. It's mostly `checkers` everywhere,
which is already the default. `linters` becomes `--no-capture --linters-only`.
`infer` is supposed to be `checkers` already. `crashcontext` is
`--crashcontext-only`.
Reviewed By: mbouaziz
Differential Revision: D9942689
fbshipit-source-id: 048281761
Summary: It is common on Android code to recycle the `View` object by nullifying them in the `onDestroy()` or `onDestroyView()` methods. In this case, the outer `Fragment` object structure is preserve while the inner `View` object are set to null for the garbage collect to release the memory. However, if the fields are only set to `null` in the `onDestroy*()` methods, those fields cannot be `null` during the active lifecycle of the `Fragment`, so it is not necessary to annotate those fields with `Nullable`.
Reviewed By: mbouaziz
Differential Revision: D10024458
fbshipit-source-id: b05e538d9
Summary:
The method matcher is now used sufficiently it warrants refactoring out into its own module.
Also, kill dev-android-strict-mode and leave starvation-strict-mode as the stronger option.
Reviewed By: jeremydubreil
Differential Revision: D9990753
fbshipit-source-id: 626a70a19
Summary: Always read the attributes from the attributes DB instead of trying to read the attributes from the analysis summaries
Reviewed By: mbouaziz
Differential Revision: D9845085
fbshipit-source-id: aef48e6bf
Summary: No longer report inconsistencies with the annotations with subtyping when the super class is in an external packages since those warnings are not necessarily accurate or actionable.
Reviewed By: ezgicicek
Differential Revision: D9845098
fbshipit-source-id: 1f2bcd739
Summary: Sometimes it's very confusing to see why infer believes a method is running on the UI thread. Make a trace out of all the relevant info.
Reviewed By: mbouaziz
Differential Revision: D9781212
fbshipit-source-id: 6d018e400
Summary:
Turn off by default until mature enough.
Also rename the dev-strict-mode test dir to highlight the dev part.
Reviewed By: mbouaziz
Differential Revision: D9775571
fbshipit-source-id: c3a41bbdf
Summary:
First step in writing an analyzer that is meant to run only on Android core library implementation.
This will, when finished, compute the library entrypoints that may lead to a strict mode violation.
The normal analyzer will use those to statically flag strict mode violations in app code.
Strict Mode is an Android debug mode, where doing certain things (like disk read/write or network activity) on the UI thread will raise an exception. We want to statically catch these, as well as indirect versions (the UI thread takes a lock and another thread holding that lock calls a method that would be a strict mode violation).
Reviewed By: mbouaziz
Differential Revision: D9634407
fbshipit-source-id: c30bcedb3
Summary:
Separate and rename error reporting functions that use the biabduction state.
No checkers should call these functions.
Reviewed By: da319
Differential Revision: D9633579
fbshipit-source-id: 884fcee66
Summary: The `procedure` field in the final report should use the non-ambiguous fully qualified name containing the Java package declaration and the list of parameter types.
Reviewed By: mbouaziz
Differential Revision: D9237522
fbshipit-source-id: e9b0ff664
Summary: Treat calls to Thread.sleep as blocking, even when the timeouts are less than the ANR limit.
Reviewed By: da319
Differential Revision: D9027950
fbshipit-source-id: 001409896
Summary:
Guava subclasses Future in ways that make .get() calls safe from the UI thread.
Treat such methods as skip.
Reviewed By: jeremydubreil
Differential Revision: D9013475
fbshipit-source-id: 38373aa5f
Summary:
This previous FP does not occur anymore, make sure it doesn't regress.
https://github.com/facebook/infer/issues/49
Reviewed By: dulmarod
Differential Revision: D8442842
fbshipit-source-id: b3fde1ad1
Ezgi Çiçek
Sungkeun Cho
Nikos Gorogiannis
Jules Villard
Mitya Lyubarskiy
Radu Grigore
Josh Berdine
Jeremy Dubreil
Andrew Adams-Moran
Radu Grigore
Dino Distefano
Wenzhe Lu
Mehdi Bouaziz
Boris Valkov
Nikos Gorogiannis
Martino Luca
Julian Sutherland