Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Use a monotonic time source instead.
Also, sleep between retries in the Serialization code.
Reviewed By: jberdine
Differential Revision: D5941697
fbshipit-source-id: 05efbe1
Summary: Not sure if useful but seems sensible. It disappears at the top of the stack when we do merging in SQL.
Reviewed By: mbouaziz
Differential Revision: D5824131
fbshipit-source-id: fd64752
Summary:
`reraise` was error-prone when one forgot to save the backtrace between where the exception is caught and where it is reraised.
If any exception was raised (even caught) in between, the printed backtrace would be the one of the last exception thrown and it would be very confusing.
This diff kills `reraise` and introduces `reraise_after exn ~f` and `reraise_if exn ~f` to be used right after catching the exception.
Also turned some of them to the common pattern `try_finally ~f ~finally`.
Reviewed By: jvillard
Differential Revision: D5911244
fbshipit-source-id: 9883d1e
Summary: Try to preserve the original backtrace. Introduce `reraise` in the global namespace.
Reviewed By: jberdine
Differential Revision: D5804121
fbshipit-source-id: 0947a47
Summary:
Calling `Exn.backtrace` doesn't give us the current backtrace, only the one of
the latest exception raised. Change the logic of toplevel exception catching to
print the right backtrace.
Also, do not use `Format` to print from `Config` as `Logging` may have messed
with it already.
Finally, throw in some colours!
Reviewed By: jberdine
Differential Revision: D5764825
fbshipit-source-id: cd51688
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary:
oops_house
This was introduced when upgrading Core, as `Unix.readdir` became deprecated in
favour of `Unix.readdir_opt` but the exception-based logic was left unchanged.
Reviewed By: mbouaziz
Differential Revision: D5461353
fbshipit-source-id: c0994c3
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
This will be needed to re-use the functions now in Driver.ml in other contexts
without always adding to infer.ml. For instance, this is used in a later diff
to do a diff-analysis orchestrator that needs to run the capture and analysis
several times.
Reviewed By: jberdine
Differential Revision: D5319862
fbshipit-source-id: caf9551
Summary:
This avoids race conditions when two processes or more try to lock a file for
writing. It could be that the process losing the race writes less than the
winner, then we get rubbish at the end of the file. Calling `ftruncate(2)` inside the critical section makes sure the
contents of the file are erased first. The harmful race was observed in
xcodebuild sometimes, as it can call infer on the same file several times in
parallel (!).
Reviewed By: jberdine
Differential Revision: D5209177
fbshipit-source-id: 744169c
Summary:
When dealing with differential's comparisons, SourceFiles in reports may not exist anymore because of changes between revisions.
Disable user visible warnings if desired, through the labeled argument `~warn_on_error`
Reviewed By: jvillard
Differential Revision: D5217097
fbshipit-source-id: 7a1542b
Summary:
Change the API of `Logging` wrt to writing to files and to the console (see
changes in logging.mli).
Write only to one log file: infer-out/log. Prefix each line with the kind of
warning and the PID of the process emitting it. Writing with `O_APPEND` is
atomic so the file should not get garbled by concurrent writes. To get the
output of a single process, find out which one interests you by looking at
infer-out/log, then `grep ^[<PID>] infer-out/log`.
Introduce 3 log levels for debug output and command-line options to set them
for various categories individually.
Change tons of `"\n"` to `"@\n"` so the `Format` module is aware of newlines
without us having to look through every character of every logged string for
`\n` characters.
Reviewed By: mbouaziz
Differential Revision: D5165317
fbshipit-source-id: 93c922f
Summary:
This makes it clearer that something went wrong. Most `failwith` did not set
this prefix already, so I opted to append it automatically and remove it from
the few instances that added it manually.
Also add quotes around bad user arguments to lessen possible confusion.
Reviewed By: jberdine
Differential Revision: D5182272
fbshipit-source-id: 20e4769
Summary:
This will be needed higher up in the stack because the new `ProcessPool` module
will need to call into `Logging` to refresh the logging formatters to get the
right PID when writing to the log file.
+remove dead code `iter_parallel`
Reviewed By: jberdine
Differential Revision: D5165130
fbshipit-source-id: 95c949b
Summary:
Ran the build with -w,-32 , delete code, repeat, until a fixpoint of no more warnings is reach.
Unfortunately we cannot fatal on w32 because ppx_compare can generate dead code (eg `compare_t` and only `compare` is used).
Reviewed By: mbouaziz
Differential Revision: D4945800
fbshipit-source-id: c95afb6
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary:
- Do not print OCaml backtrace unless in developer mode.
- Print javac output when it fails.
- Refactor Javac.ml so that rerunning the command doesn't duplicate code.
The output of the clang and Javac integration is good, the output for mvn is
ok, the output for Buck is still fairly "meh".
Reviewed By: jberdine
Differential Revision: D4818722
fbshipit-source-id: 1973b93
Summary: This is dead code, and depends on libffi which we could get rid of otherwise.
Reviewed By: jberdine
Differential Revision: D4705645
fbshipit-source-id: efd28ef
Summary:
Add a new command-line option `--per-procedure-parallelism`, to change the granularity of parallelism of the analysis from file to procedure.
This is intended for `--reactive` mode where e.g. a single file is changed and the analysis currently uses just one core.
When the option is used, the Makefile mechanism is replaced by using forking instead.
The parent process does as little allocation as possible, to avoid taxing the kernel.
Caveats:
- Not active in Java, (issues with camlzip).
- Not active in checkers, yet.
Example use:
```
infer --reactive --changed-files-index index.txt --per-procedure-parallelism -- analyze
```
Reviewed By: jberdine
Differential Revision: D4634884
fbshipit-source-id: e358c18
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
Epilogue tasks such as closing logs or putting files back were we found them
run automatically at the end of our executables by registering them with
`at_exit`. They do not run if the program is interrupted by a signal. This diff
makes sure they are run when the user stops infer with Ctrl-C (SIGINT).
Reviewed By: cristianoc
Differential Revision: D4435575
fbshipit-source-id: c3ab702
Summary:
Change Utils.filename_to_relative to return None in case the filename
is not under root, rather than returning the filename unchanged.
Reviewed By: akotulski
Differential Revision: D4391075
fbshipit-source-id: bf753af
Summary:
Force clients to specify the path relative to which relative paths
should be made absolute.
Reviewed By: akotulski
Differential Revision: D4370262
fbshipit-source-id: 36a2807
Summary: Turns out I forgot to close the fd returned by dup(2) so we were leaking a lot.
Reviewed By: jeremydubreil
Differential Revision: D4327389
fbshipit-source-id: 74574ac
Summary:
<ugly shameful hack>
Temporarily redirect stderr to /dev/null before calling `Javalib.get_class` so
as to avoid getting spammed with "Warning: unexpected attribute: Code" messages
when parsing Java files.
</ugly shameful hack>
I suspect that now that Javalib handles Java 8 this issue is more prevalent. An
issue/PR should be sent to Javalib too so that it's fixed upstream and we can
eventually remove the hack (t15039096).
Reviewed By: jberdine
Differential Revision: D4319466
fbshipit-source-id: af855ba
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Josh Berdine
Jules Villard
Mehdi Bouaziz
Martino Luca
Dulma Churchill
Cristiano Calcagno