Summary:
The old syntactic invariant in prog_ok was in the wrong direction,
saying that all labels in a phi instruction have to exist, rather than
saying that when we jump to a new block, the label of the block we came
from must be in all of the phi instructions.
Reviewed By: jberdine
Differential Revision: D18058832
fbshipit-source-id: d2ad33b04
Summary:
This required some minor tweaks to how the semantics encode values into
and out of byte lists. The remaining problems have to do with how LLVM
globals are translated into llair. At the moment, llair semantic's state
keeps a mapping for globals to their addresses, following the LLVM
semantics. However, it is not used because the translation (following
the code in frontend.ml) translates LLVM globals into llair locals,
which the llair semantics isn't set up to handle.
Reviewed By: jberdine
Differential Revision: D17930787
fbshipit-source-id: 06c6368e0
Summary: As suggested by artempyanykh, this will make it bit more clear
Reviewed By: artempyanykh
Differential Revision: D18037204
fbshipit-source-id: 65cb96815
Summary: We stop tracking at builder boundaries. Let's tract create methods as well so that trace is more informative.
Reviewed By: skcho
Differential Revision: D18038637
fbshipit-source-id: a99b6431f
Summary:
Although, we have Makefile and BUCK build def, this is a maven project
which is supposed to be released to Maven Central, so it's worth
having a short instruction on how to build it with maven.
Reviewed By: mityal
Differential Revision: D18037109
fbshipit-source-id: 6aebf4384
Summary: Adding support to matching block names. We match mangled block names. We also needed to extend the function for extracting the range for each method, to also traverse the stmts to be able to find the block declarations.
Reviewed By: skcho
Differential Revision: D17956931
fbshipit-source-id: 707908812
Summary:
We support only class level annotations for now. We will add more when
we support more.
Reviewed By: artempyanykh
Differential Revision: D18036213
fbshipit-source-id: 44791318e
Summary:
This is the first take on strict mode semantics.
The main invariant of strict mode is the following:
If the function passes `NullsafeStrict` check and its return value is
NOT annotated as Nullable, then the function does not indeed return
nulls, subject to unsoundness issues (which should either be fixed, or
should rarely happen in practice).
This invariant helps the caller in two ways:
1. Dangerous usages of non strict functions are visible, so the caller is enforced to check them (via assertions or conditions), or strictify them.
2. When the function is strict, the caller does not need to worry about
being defensive.
Biggest known issues so far:
1. Condition redundant and over-annotated warnings don't fully
respect strict mode, and this leads to stupid false positives. (There is
so much more stupid false positives in condition redundant anyway, so
not particularly a big deal for now).
2. Error reporting is not specific to mode. (E.g. we don't distinct real nullables and non-trusted non-nulls, which can be misleading). To be
improved as a follow up.
Reviewed By: artempyanykh
Differential Revision: D17978166
fbshipit-source-id: d6146ad71
Summary:
This is an intermediate nullability type powering future Strict mode.
See the next diff.
Reviewed By: artempyanykh
Differential Revision: D17977909
fbshipit-source-id: 2d5ab66d4
Summary:
Currently, we have NullsafeRules.ml responsible for detecting the
violation fact. All other logic: what should be the error type,
severity, and error message, is in TypeErr.ml.
In this diff, we move logic from NullsafeRules.ml and TypeErr.ml to
dedicated modules like AssignmentRule.ml etc.
Each such module is responsible for:
- detecting the violation fact (this is moved from NullsafeRules.ml)
- rendering the violation error (this is moved from TypeErr.ml).
This approach makes sense for two reasons:
1. The violation fact and the way we show error are logically related to
each other.
2. In future diffs, we will support more features guiding rule behavior,
such as a) decision whether to hide or show the error depending on type
information and mode; b) the way we render error depending on type
information and role.
Having dedicated modules incapsulating knowledge about rules is a natural way to support 2.
Reviewed By: artempyanykh
Differential Revision: D17977891
fbshipit-source-id: a53d916d3
Summary:
1. For each Nullsafe Rule, lets have a dedicated IssueType.
2. Split error reporting to three subfunctions: description, field type,
and infer issue.
This allows to introduce additional capabilities in a consolidated
manner. Example of such capabilities is should we hide or show an error,
what should be error severity depending on strictness mode, and how
exactly the error should be reported depending on how exactly
nullability is violated.
Reviewed By: artempyanykh
Differential Revision: D17977887
fbshipit-source-id: 860d67d2f
Summary:
This function can return `None` if the result is equal to the first
argument of join (why first?). It is unclear if it was an optimization
attempt of over-complicated logic.
Reviewed By: artempyanykh
Differential Revision: D17876561
fbshipit-source-id: 9628fb86e
Summary:
The goal of this logic is unclear:
1/ See the comments
2/ I can not see the scenario where classes and proper types can be
joined in a legit Java program
3/ Even it if was the case, I don't see how this heuristic is justified.
So I assume it is not.
Reviewed By: artempyanykh
Differential Revision: D17876568
fbshipit-source-id: c9c6cd604
Summary:
It is unclear what is the purpose of doing so, and it adds complexity to
codebase.
1/ The semantics of this is not clear, it more or less corresponds to
"where are all original locations that contributed to the type
calculation", but many branches in CFG have nothing to do with
nullability; also it was used not always consistently.
2/ The only place where this was used is logs, so this is no-ops. It is
unclear how seeing all locations can help debugging, given 3/ - see
below
3/ We have the right place to store such informatin, namely TypeOrigin,
where we store locations associated with types where we merge them in
CFG. Currently, we store only "winner" - the most relevant locations
that contributed to nullability in the most informative way. We show
this to the user when we report an error.
4/ If we want to support more things (e.g. show something more to the user), TypeOrigin
seems to be the right place. Or, alternatively, we might still merge
locations in `range`, but this will be better to organize in a tree form
instead of flat list that is not really informative and helpful. It is
all speculative though since need to support things like that seems
unclear.
Reviewed By: artempyanykh
Differential Revision: D17857198
fbshipit-source-id: 6cf6e48a2
Summary:
That module's interface was repeated twice to avoid exposing its
internals to PulseDomain itself. It's also quite long so it makes sense
to move it to its own file.
Reviewed By: ezgicicek
Differential Revision: D17977209
fbshipit-source-id: 56a2dac24
Summary:
Another poorman's library, this time about Pulse Domains. Also renames
`PulseDomain` to `PulseBaseDomain`.
Reviewed By: ezgicicek
Differential Revision: D17955287
fbshipit-source-id: 9c947cf98
Summary:
The name had rotten: it should be `AddrHistPair`. There is little value
of exposing the type of the pair `AbstractValue.t * ValueHistory.t`,
just inline its definition everywhere.
Reviewed By: ezgicicek
Differential Revision: D17955283
fbshipit-source-id: d145251e0
Summary:
See explanations in D17955104.
This renames `AbstractAddress` to `AbstractValue` since they are not
necessarily addresses.
Reviewed By: ezgicicek
Differential Revision: D17955290
fbshipit-source-id: 8bb4c61f2
Summary:
See explanations in D17955104. I put Attributes inside PulseAttribute
instead of creating a new file to avoid exposing more internals about
ranks.
Reviewed By: ezgicicek
Differential Revision: D17955284
fbshipit-source-id: a8719a58f
Summary:
Problem: PulseDomain.ml is pretty big, and contains lots of small
modules. The Infer build being a bit monolithic at the moment, it is
hard to split all these small modules off without creating some
confusion about which abstraction barries lay where. For instance, it's
fine to use `PulseDomain.ValueHistory` anywhere, but using `PulseDomain`
itself is sometimes bad when one should use `PulseAbductiveDomain`
instead.
Proposal: a poorman's library mechanism based on module aliasing. This
stack of diffs creates new Pulse* modules for all these small, safe to
use modules, together with `PulseBasicInterface.ml`, which aliases these
modules to remove the `Pulse` prefix. At the end of the stack, it will
contain:
```
module AbstractValue = PulseAbstractValue
module Attribute = PulseAttribute
module Attributes = PulseAttribute.Attributes
module CallEvent = PulseCallEvent
module Diagnostic = PulseDiagnostic
module Invalidation = PulseInvalidation
module Trace = PulseTrace
module ValueHistory = PulseValueHistory
```
This "interface" module can be opened in other pulse modules freely.
Reviewed By: ezgicicek
Differential Revision: D17955104
fbshipit-source-id: 13d3aa2b5
Summary: In preparation for improvements to the arithmetic reasoning.
Reviewed By: dulmarod
Differential Revision: D17977207
fbshipit-source-id: ee98e0772
Summary:
Domain for thread-type. The main goals are
- Track code paths that are explicitly on UI thread (via annotations, or assertions).
- Maintain UI-thread-ness through the call stack (if a callee is on UI thread then the
trace any call site must be on the UI thread too).
- If we are not on the UI thread we assume we are on a background thread.
- Traces with "UI-thread" status cannot interleave but all other combinations can.
- We do not track other annotations (eg WorkerThread or AnyThread) as they can be
erroneously applied -- other checkers should catch those errors (annotation reachability).
- Top is AnyThread, and is used as the initial state for analysis.
Interestingly, by choosing the right strategy for choosing initial state and applying callee summaries gets rid of some false negatives in the tests even though we have not introduced any path sensitivity yet.
Reviewed By: jvillard
Differential Revision: D17929390
fbshipit-source-id: d72871034
Summary: For Objective-C methods we match the mangled names (the field is name in the profiler samples).
Reviewed By: skcho
Differential Revision: D17952552
fbshipit-source-id: 308d415f6
Summary:
bigmacro_bender
There are 3 ways pulse tracks history. This is at least one too many. So
far, we have:
1. "histories": a humble list of "events" like "assigned here", "returned from call", ...
2. "interproc actions": a structured nesting of calls with a final "action", eg "f calls g calls h which does blah"
3. "traces", which combine one history with one interproc action
This diff gets rid of interproc actions and makes histories include
"nested" callee histories too. This allows pulse to track and display
how a value got assigned across function calls.
Traces are now more powerful and interleave histories and interproc
actions. This allows pulse to track how a value is fed into an action,
for instance performed in callee, which itself creates some more
(potentially now interprocedural) history before going to the next step
of the action (either another call or the action itself).
This gives much better traces, and some examples are added to showcase
this.
There are a lot of changes when applying summaries to keep track of
histories more accurately than was done before, but also a few
simplifications that give additional evidence that this is the right
concept.
Reviewed By: skcho
Differential Revision: D17908942
fbshipit-source-id: 3b62eaf78
Summary:
Java method annotations are ambiguous in that there is no difference between
annotating the return value of a method, and annotating the method itself.
The disambiguation is done entirely based on the meaning of the annotation.
Here, while `UiThread`/`MainThread` are genuine method/class annotations
and not return annotations, the reverse is true for `ForUiThread`/`ForNonUiThread`.
This means that these latter annotations do not determine the thread status of
the method they are attached to.
Here we fix that misunderstanding.
Reviewed By: jvillard
Differential Revision: D17960994
fbshipit-source-id: 5aecfb124
Summary: As per title. These test pass already because the previous thread domain was sufficient to express them. This won't necessarily be true when the whole-program analysis version comes around, because we may decide to not report on the `Threaded` elements (see domain).
Reviewed By: dulmarod
Differential Revision: D17930653
fbshipit-source-id: 2174f6b22
Summary:
- Adds ATD file to parse the clang profiler samples
- Procnames don't help us here because we want to use mangled names, not the version of names that Infer needs, so passing in the RangeMap also ClangProc that just include the names and mangled names.
- First matching of c functions to have something in place to add a test, matching further method kinds to be done in next diff.
Reviewed By: skcho
Differential Revision: D17877071
fbshipit-source-id: b31d651a7
Summary:
I dunno, seemed wrong before. About to introduce another attribute with
similar arguments so making them consistent in advance.
Reviewed By: skcho
Differential Revision: D17930349
fbshipit-source-id: 944b58bac
Summary:
- add the variable being declared so we can report it back in the trace in addition to its location
- distinguish between local vars and formals
Reviewed By: skcho
Differential Revision: D17930348
fbshipit-source-id: a5b863e64
Summary:
The Used globals (pre-)analysis produces results queried by
Control. This diff adds a type definition for these and moves the
query into the Used_globals module.
Reviewed By: bennostein
Differential Revision: D17856879
fbshipit-source-id: 0211b82d7
Summary:
To avoid code explosion, the frontend emits move instructions for
expressions with more than one use. This diff relaxes this slightly by
allowing duplication of casts.
Reviewed By: bennostein
Differential Revision: D17856384
fbshipit-source-id: 6f6c496ef
Summary:
The frontend translation of exceptional control flow is untrusted
enough that it makes sense to disable it by default.
Reviewed By: bennostein
Differential Revision: D16061018
fbshipit-source-id: 65dca36ae
Summary:
The CFG of a function is implicit in the blocks themselves, so it is
possible to remove the explicit represention as a vector of
blocks. The only uses are fold or iter, and since the cycles are
detected during construction, these can be simple depth-first
traversals.
Reviewed By: bennostein
Differential Revision: D17821845
fbshipit-source-id: fc7a02151
Summary:
- Putting test determinator in own directory
- Putting Java procname creation stuff in its own module
Reviewed By: skcho
Differential Revision: D17929885
fbshipit-source-id: 4f2578566
Scott Owens
Mitya Lyubarskiy
Dulma Churchill
Ezgi Çiçek
Artem Pianykh
Jules Villard
Nikos Gorogiannis
Josh Berdine